Search results: daddy

Sort order

189 models

P
PrintablesMartin Kurka

Scrub Daddy / Mommy Holder

German / Deutsch: Praktischer Scrub Daddy/Mommy Halter für Küche oder Bad. Runde Platte mit ausstehenden Augen und Mund bietet eine charmante Aufbewahrungsmöglichkeit. Hergestellt aus umweltfreundlichem BioTech PLA Weiß, mit 10% Infill in…

Downloads
291
Likes
58
Rating
4.86
P
PrintablesAnton Soliaryk

Dyson v6 attachment micronozzle (Dust Daddy)

This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.

Downloads
26
Likes
2
Rating
0
P
PrintablesColeH

Peeing Scrub Daddy Holder

Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.

Downloads
10,312
Likes
547
Rating
4.5
P
PrintablesIan F
18+

The source marked this model as adult content.

Downloads
5,718
Likes
1,112
Rating
4.87
P
PrintablesGaryMo

Scrub Daddy Holder

My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…

Downloads
5,659
Likes
777
Rating
4.85
P
PrintablesGaryMo

Scrub Daddy Holder with Jointed Legs

My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…

Downloads
5,072
Likes
378
Rating
4.87
P
PrintablesAustin Hansen

Articulated Scrub Daddy Sink Holder w/ Drain

Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…

Downloads
4,627
Likes
541
Rating
4.96
P
PrintablesLarryD

Scrub Daddy Tray

Simple self draining tray to hold a round Scrub Daddy or other 100mm dia. x 40mm wide sponge. Feet at the back prevents it from sliding into the sink and a lip at the front drains water back into sink. Position at the back of the sink…

Downloads
1,506
Likes
150
Rating
5
P
PrintablesIanryeng

Scrub Daddy Dryer

Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…

Downloads
1,360
Likes
347
Rating
4.93
P
Printablesat0maly

SCRUB DADDY HOLDER

The Scrub Daddy! It's the Apple phone of sponges - overpriced but seemingly for good reason. I hated leaving my Scrub Daddy sitting looking pitiful on the counter top; so what did I do? I went a made a nice little mount for him! (Or her…

Downloads
1,224
Likes
111
Rating
4.86
P
PrintablesALC

Scrub Daddy Holder

A holder for your Scrub Daddy with ergonomic drain

Downloads
1,222
Likes
56
Rating
3
P
PrintablesDarius_sh

Bioshock Bigdaddy (Bouncer)

One part, sculpted from scratch. Suupport intensive. Category: Sculptures

Downloads
1,120
Likes
214
Rating
4.8
P
Printablesjosepilar
18+

The source marked this model as adult content.

Downloads
1,096
Likes
108
Rating
4.88
P
PrintablesTmpx64

Medical Pill threaded Capsule - Gift idea - the original - the daddy - screw pill box

Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…

Downloads
1,016
Likes
248
Rating
5
P
PrintablesRoute3d6

Scrub Daddy holder

It is recommend to print laying on back and add supports for fingers only. Will need some post processing. Edited to add Big Daddy, longer legs and forward lean for a larger base and better center of balance.

Downloads
959
Likes
93
Rating
5
P
Printablessamwiseg0

Scrub Daddy Sink Caddy

Scrub daddy sink caddy! BOM: Suction Cups The suction cup holes measure 14mm (outermost diameter) to 10 mm (inter diameter). See the example suction cup measurement image included. NOTE: Before printing, check to see if your sponge will…

Downloads
919
Likes
151
Rating
5

Sponge Caddy for Scrub Daddy

This 3D printed sponge caddy is the perfect accessory for the Scrub Daddy sponge. Designed to keep your Scrub Daddy within easy reach while you’re washing dishes or cleaning counters, this holder is crafted to securely hold the sponge and…

Downloads
845
Likes
58
Rating
4.78
P
PrintablesAsh

Multiboard - Daddy Long Leg 85mm & 65mm Peg Hook REMIX

Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 3 honeycomb infill support = NO

Downloads
827
Likes
115
Rating
5
P
PrintablesAshyukun

Quick-Print Scrub Daddy Sponge Holder

For long time now, we've been using the Scrub Daddy line of sponges in our kitchen. They've typically either been set on the edge of the sink or (on occasion) stuck on the handle of the faucet using the ‘mouth’ of the sponge. I searched…

Downloads
819
Likes
122
Rating
4.86
P
Printables3Dudek

ScrubDaddy Sponge Holder

ScrubDaddy sponge holder with drain tube.

Downloads
785
Likes
105
Rating
5
P
Printablesmatttheamateur

Sponge Holder for Scrub Daddy

This is the same as the original adjusted to hold a thicker sponge. The original has been in my sink for about 3 months. It seems to be holding up well. I printed this in PETG at 0.2mm layer height, 3 walls, and 10% infill. The Fusion 360…

Downloads
770
Likes
89
Rating
5
P
Printablesdthoi99

Scrub Daddy Stand

A family member asked me to print one of those scrub daddy stands that have legs, but none of the models I found fit on my build plate (100x140mm) so I decided to model one myself. I tried to challenge myself and do some curves based…

Downloads
765
Likes
53
Rating
5
P
PrintablesHoneyBunny3D

Cow Scrub Daddy Holder

Highland Cow Scrub Daddy Holder. Drains out of mouth. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…

Downloads
606
Likes
53
Rating
5
P
PrintablesNolson 8

Scrub Daddy Drain

Printed on both a Ender 3 v2 and a Formlabs Form 3

Downloads
589
Likes
77
Rating
0

Big Daddy Caddy 33 Vase Mode

I don't have room for that! Compact version : https://www.printables.com/model/366614-super-compact-29-pen-caddy-vase-mode

Downloads
584
Likes
186
Rating
4.8
P
PrintablesRamirez62463

Scrub Daddy Holder

This model is a Scrub Daddy holder designed for a kitchen sink. The holder features a compartment to neatly store the sponge and has a funnel on the base. This funnel allows any excess water from the Scrub Daddy to drip directly into the…

Downloads
581
Likes
46
Rating
5
P
PrintablesJason Grissom

Glue Daddy Caddy

The Glue Daddy Caddy v1. I wanted a caddy for storing my different silicone glue brushes and what not. So I made one. The handle is made to friction fit into the body (mine has been fine without glue) but you may add glue to secure the…

Downloads
579
Likes
121
Rating
0
P
PrintablesCheepyGoose

Drill Daddy - Scrub daddy holder

An adaptor that attaches Scrub Daddy sponges to a 1/4" hex shank drill.

Downloads
563
Likes
79
Rating
0
P
PrintablesVen

Scrub daddy drill attatchment

This is my solution for attaching a scrub daddy to a cordless drill. This model features a 9mm diameter hexagonal bit connected to a scrub daddy holder tip. Should work with all scrub daddy sponges. I have the dual sided one. Works great…

Downloads
520
Likes
39
Rating
5
P
Printablestacosurf

Scrub Daddy Holder

A sink caddy that holds your Scrub Daddy sponge for quick access and guiding excess water back into the sink. About 85g (supports, 15% infill, printed oriented as it would sit) Print with supports

Downloads
515
Likes
48
Rating
5
P
Printablesgoldiesvinyl

Flush Scrub Daddy Holder

sits flush on the counter and drains into sink

Downloads
504
Likes
58
Rating
4.86
P
PrintablesBlated

Scrub Daddy Sponge Holder v2 with CADDY

UPDATE MAY 15TH 2025: I've uploaded a fully print-in-place model, no need to print the pieces separately. This one works excellent, but just note that the scrub daddy eyes/mouth portion will be printed horizontally, rather than vertically…

Downloads
436
Likes
48
Rating
5
P
Printablessmintarz

Scrub Daddy/Scrub Mommy dry stand/holder with drip tray

A sturdy stand / holder for drying and storing your Scrub Daddy or Scrub Mommy sponges, with optional drip tray and optional raisers for the drip tray. The raisers must be glued to to the tray, but this is optional. Printed mine in 0.12mm…

Downloads
434
Likes
107
Rating
5
P
PrintablesHi I'm a PC

Big Daddy 37 Bong

Allow me to present to you the epitome of smoking sophistication! Behold this marvel, boasting a 37-tree perk design meticulously crafted to ensure unparalleled water agitation. Furthermore, it is equipped with a built-in splash guard,…

Downloads
424
Likes
49
Rating
5
P
PrintablesPrinting

Scrub daddy holder

Scrub daddy holder

Downloads
406
Likes
20
Rating
5
P
PrintablesShevaCZE

Scrub Daddy Sponge Holder

Scrub daddy sponge holder - No support - Easy print - No glue - Two pieces - Easy assembly

Downloads
371
Likes
38
Rating
5
P
Printables3DWP

Bioshock Big Daddy

This is a photogrammetry 3D scan I found by 3Digify, software that used cameras to construct a mesh (doesn't exist anymore). I smoothed the mesh and gave the feet flat planes so it will hopefully stand better. I also added a colored mesh…

Downloads
364
Likes
34
Rating
0
P
Printablesnixkor

Battery Daddy Clip

Replacement clip for Battery Daddy organizer. I printed this in eSun PLA+ and they have held up well for a few months of light usage. If they snap I'll reprint in PETG. Support needed on the clip but not on the ribs. Note: Depending on…

Downloads
362
Likes
27
Rating
4.67
P
PrintablesTyler Vilk

scrub daddy holder

a holder for a scrub daddy

Downloads
348
Likes
32
Rating
5
P
Printablesarnmac

Scrub Daddy Kitchen Sink Caddy

My wife needed something to hold her Scrub daddy sponges. This is designed to fit over my sinks middle divider and hold the daddy/mommy sponge with the spikes for the eyes and another normal sponge on the other side. Designed so that the…

Downloads
343
Likes
45
Rating
5
P
PrintablesD. Hamilton

Scrub Daddy Holder with Drain

This is my first 3D print that I am comfortable sharing. I wasn't happy with other models without drains and some drains didn't fit my needs. The drain is large enough as to not impede flow and it sits nicely on the side of a sink. I used…

Downloads
329
Likes
22
Rating
0
P
PrintablesHoneyBunny3D

Ella the Elephant Scrub Daddy Sponge Holder

Ella the Elephant Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check…

Downloads
325
Likes
28
Rating
1
P
PrintablesQUEU3D

Scrub Daddy Handle

A handle for the scrub daddy. Designed to be printed without any supports.

Downloads
276
Likes
40
Rating
5
P

"BIG DADDY" Spool Holder Rev.3

The BIG DADDY opens to approx. 140mm wide and closes as small as approx. 46mm. The BIG DADDY does not sag when fully open, with a 3kg+ weight resting on the chassis. The BIG DADDY chassis prints flat, without supports. Get those depositon…

Downloads
276
Likes
62
Rating
5
P
PrintablesShakataGaNai

Scrub Daddy sink holder

A sponge (scrub daddy) holder. It's got a flat (give or take) bottom for sitting on flat counter tops. It's ramped internally so that any moisture in the sponge will run off into the sink. Plenty of ventilation to help it dry. While I…

Downloads
272
Likes
19
Rating
0
P
PrintablesDa chosen one

Iron Throne Scrub Daddy Holder

Print without supports, brim and raft are optional. (P.S. It looks hilarious.)

Downloads
265
Likes
37
Rating
5
P
PrintablesJeff

Scrub Daddy Holder and Sink Drainer

A holder for your Scrub Daddy that will drain into the sink. Gap from the edge of my sink to the wall is 5 13/16 inches or roughly 147mm so it should work for anything that size or smaller

Downloads
256
Likes
15
Rating
0
P
PrintablesLogan B

Scrub Daddy Keychain

I thought I'd gain some more experience in 3D modeling and try and recreate a common object. I recreated the Scrub Daddy sponge and miniaturized it and made a keychain out of it. This is made in 2 parts which secure together using 1.75 mm…

Downloads
244
Likes
75
Rating
5

Scrub Daddy Drill Attachment

Recommend printing with 3+ wall layers to help keep the socket from reaming out.

Downloads
231
Likes
41
Rating
4
P

Scrub Daddy Sink Caddy

Sink holder for Scrub Daddy Sponge. Can be secured by suction cups or 3M VHB double-sided tape.

Downloads
209
Likes
24
Rating
5
P
PrintablesFilaMonkey

SpongeMonkey Scrub Daddy Drying Tray

What is it? Well, it's a drying tray for those awesome Scrub Daddy or Scrub Mommy sponges! Why? We use these sponges in our kitchen but didn't really have anywhere to store and dry it. So, like a lot of us 3d printer types, I decided why…

Downloads
201
Likes
35
Rating
5
P
PrintablesŁukasz Dubczyk

Daddy Pig cookie cutters

Daddy Pig cookie cutters

Downloads
199
Likes
22
Rating
4
P
PrintablesToby Croft

Scrub Daddy Kitchen Sink Caddy with Dish Wand/ Brush Holder

Printed with PETG at 0.2 mm, 25% infill with Tree Supports.

Downloads
196
Likes
30
Rating
0
P
PrintablesRox
18+

The source marked this model as adult content.

Downloads
195
Likes
90
Rating
5
P
PrintablesBirks Creative

Battery Daddy D-cell Inserts for Button Cells 2032, 2025, and 357/303, v2

The Battery Daddy is a great organizer for batteries. Unfortunately, it only has storage areas designated for AAA, AA, C, D, and 9-volt. This design allows you to convert the D-cell storage slots into holders for a variety of button…

Downloads
194
Likes
33
Rating
2
P
PrintablesInqEnzo

Battery Daddy holders for 2032 & 357 size batteries

These 2 battery holders take the place of a D cell battery in the Battery Daddy storage box (or any other battery storage box) After all D cells are mostly for flash lights and who needs 8 of them. These holders are for CR2032 & 357/303…

Downloads
192
Likes
18
Rating
3
P
Printablesqqölqlqlalal

Magnetic Scrub Daddy Holder

For my first attempt at CAD design, I made this simple magnetic holder for a scrub daddy. Magnet dimensions Diameter: 18.5mm Height: 4.8mm When slicing, have it stop just before the layer that covers the hole for the magnet. Drop the…

Downloads
191
Likes
22
Rating
5
P
PrintablesModel Magic

Fury - Staff Sergeant Don Wardaddy Collier - 2014

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
182
Likes
26
Rating
0
P
PrintablesMZA

Sunflower Scrub Daddy/ Mommy no supports

Yet another scrub Daddy/Mommy holder! There are many good models for this very popular scrub sponge but I wanted to add a little whimsy and a deeper drip tray. No AMS needed can be done by layer swaps. Start with black, change filament to…

Downloads
181
Likes
26
Rating
5

Bugsnax inspired, Daddy Cake Legs , Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Daddy Cake Legs, Tabletop DnD miniature 75 mm Huge base which can be used for DnD and other…

Downloads
172
Likes
5
Rating
0
P
Printables3DBrooklyn

Scrub Daddy Sponge Holder

Slides onto a 14mm suction cup connection. Category: Kitchen & Dining

Downloads
161
Likes
38
Rating
0
P
Printables3D4pets

Bonnie the Highland Cow Scrub Daddy Holder

Meet Bonnie the Highland Cow , a cozy little sponge holder designed to bring farmhouse charm straight to your sink. With her soft sculpted fur, curved horns, and gentle expression, Bonnie turns your everyday Scrub Daddy into a cute…

Downloads
143
Likes
33
Rating
0
P
PrintablesWill North

Scrub Daddy sponge holder

It also has a 1mm deep slot in the back for double-sided tape to make it more renter friendly.

Downloads
142
Likes
12
Rating
5
P
PrintablesPiGuy

Battery Daddy CR2032 Holder (D-Cell Size)

The inner curve of the slots grips the batteries as you press them in so there is little to no risk of them falling out on their own. You will likely need something small, such as an Allen/hex key, to press the batteries out from the…

Downloads
139
Likes
12
Rating
4
P
PrintablesPrairieDog15

Cute Simple Scrub Daddy Holder With Legs

This Scrub Daddy holder is an adorable addition to the family! It takes minimal filament and can be printed with smaller printers. Supports are recommended when printing.

Downloads
136
Likes
6
Rating
0
P
PrintablesCorey Baker

Scrub daddy hanger

Scrub daddy hanger designed for single handle faucet. Hangs in the sink to drain without taking up too much space. Print all three parts on a single build plate, no supports needed. 2.4mm tolerance for the hooks to slide onto the bottom…

Downloads
125
Likes
24
Rating
0
P
PrintablesJamesSF69

Sponge Daddy Dish

Sink Soap/sponge dish with Speciality scrubber holder

Downloads
120
Likes
8
Rating
0
P
PrintablesHoneyBunny3D

Derpy Chicken Scrub Daddy Holder

Derpy Chicken Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check out…

Downloads
120
Likes
25
Rating
0
P
PrintablesHoneyBunny3D

Hen Scrub Daddy Holder

Hen Scrub Daddy Sponge Holder with Drain for kitchen sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…

Downloads
113
Likes
20
Rating
5
P
PrintablesArogen67

Estes 2162 - Big Daddy Nosecone

If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. This is a quick rendering of a Big Daddy nosecone. Not…

Downloads
113
Likes
9
Rating
5

Big Daddy V2

Bioshock big daddy V2 100mm

Downloads
110
Likes
17
Rating
0
P
PrintablesMike Chen

Scrub Daddy, Mommy and other sponge holder

A nice little holder and drainer for Scrub daddy, mommy, and other dish scrubbers. Print in PETG and no support needed! It can drain the water to the sink as well if you place it close enough to the sink.

Downloads
110
Likes
26
Rating
0
P

Mac Daddy Grip

Mac Daddy custom grip for original frame with socket at the rear for brace/stock adapters. I don't think this will fit the Mac Daddy remix with the Picatinny rails at the back, at least not properly. For Mac Daddy Remix frame with the…

Downloads
102
Likes
9
Rating
5
P
PrintablesNolson 8

Scrub Daddy Holder

For all your scrub daddy needs

Downloads
101
Likes
7
Rating
0
P
PrintablesDrewMakesStuff

Scrub Daddy & Mommy Caddy

The Scrub Family Caddy I wanted to design something that can be modified to fit most suction up sizes. Suction cups I used were from Walmart, size small. I don't know the exact product as I bought them years ago. 4 MM Diameter of suction…

Downloads
99
Likes
10
Rating
0
P
PrintablesScary Terry
18+

The source marked this model as adult content.

Downloads
98
Likes
8
Rating
0
P
Printablesdbla_ronlvl

Scrub Frosty - Scrub Daddy Snowman Decoration

The print is designed to hold the popular Scrub Daddy sponge. The necktie base serves as a drip tray. No Color Changer required for this multi-color print. It is designed for no supports . No Glue Necessary Assembly Snap the hat ribbon…

Downloads
96
Likes
30
Rating
5
P
PrintablesOLKomponents.

Scrub Daddy & Scrub Mommy Drying Holder | Sink Drip Drain

Tired of leaving your wet Scrub Daddy or Scrub Mommy on the sink edge? This compact drying holder keeps your sponge neatly stored, elevated, and able to dry between uses. Small drainage channels and a front drip lip guide excess water…

Downloads
96
Likes
21
Rating
5
P
PrintablesByer

Bow-Daddy 14mm

🏹 The BOW DADDY: The Ultimate Vehicle Bow Hanger Keep your archery equipment safe, secure, and out of the way during transport! The BOW DADDY is a custom 3D-printed hanger designed to mount effortlessly to the back of a car seat,…

Downloads
95
Likes
12
Rating
0
P
PrintablesDavid Frey

Estes Doorknob/Big Daddy Nosecone with integrated Ebay

The 3-in Doorknob Nosecone Ebay Upgrade! Introduction: This model is an upgrade to the Estes 3-in Doorknob and to my 3-in Doorknob Builders Kit . It includes the ring that will fit inside the shoulder of the nosecone, the ebay sled, and…

Downloads
94
Likes
10
Rating
0
P
PrintablesMorpheoso

MacDaddy Jibbitz Croc Charm

PETG or ABS recommend since this will be outside most the time. I used a brim for the bed adhesion 10 walls to make the whole print walls. Left 15% infill

Downloads
92
Likes
12
Rating
0
P
PrintablesMuller Fourie

Scrub Daddy/Mommy kitchen mount

A mount for a scrub daddy/mommy around a kitchen tap.

Downloads
91
Likes
9
Rating
5
P
PrintablesCalvin

Scrub Daddy Holder Strong Muscles and Pee drain

A quick model i made of a Larger more Stable Scrub Daddy Holder with Strong Muscles and a Pee water drain. The feet have been enlarged

Downloads
91
Likes
7
Rating
0
P
PrintablesHoneyBunny3D

Owl Scrub Daddy Sponge Holder

Owl Style Scrub Daddy Sponge holder. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check out my patreon!…

Downloads
88
Likes
16
Rating
0
P
PrintablesTyler Wilber

Battery Daddy Clip Mirrored

I moved the "arm" to the opposite side. The original is a left side clip and this one is a right side clip

Downloads
88
Likes
6
Rating
5
P
PrintablesSteve Osburn

Scrub Daddy Sponge Holder with Drip Tray

As if there weren't already enough Scrub Daddy sponge models out there, my wife didn't like any of them. She wanted a simple design that would sit on the counter behind the sink - not in the sink, or over the sink. But one that wouldn't…

Downloads
86
Likes
8
Rating
5
P
PrintablesSchmidManuel.de

Magnetic Scrub Daddy Holder - with 2x 8mm Magnets

I've changed the maget to 2 8mm Magnets, if you use it, glue the magnes in place.

Downloads
86
Likes
12
Rating
5
P
PrintablesCeptoRider

Dish Daddy Sink Stand

In-sink holder for the Scrub Daddy Dish Daddy, Dish Wand, Soap Dispensing Dish Brush with Drip Stand. Printed in PLA and secured to sink wall with 3M VHB Tape. Like the freebie? Please Rate and share your Make 😎

Downloads
75
Likes
9
Rating
0
P
PrintablesILOVEMAKING

Scrubdaddy holder

Water comes out of the tube

Downloads
73
Likes
4
Rating
0
P
PrintablesCcraft3d

BATHROOM DADDY

The BATHROOM DADDY! Make your father proud to display his hair loss treatment, or denture glue! Or just make it for yourself, or a friend. The TEXT is customizable (in the .3mf file) in your slicer. Or delete the text layer and add your…

Downloads
72
Likes
15
Rating
0
P
PrintablesMegaman49

Scrub Daddy Suction Cup Remix

same print directions as the original

Downloads
72
Likes
6
Rating
0
P

Mac Daddy Remix Grip

Posting as a work in progress, as I don't have the Mac Daddy Remix frame printed out to check the fit. If you choose to try it, know that you may need to sand it a little. Mac Daddy custom grip for Mac Daddy remix with the Picatinny rails…

Downloads
69
Likes
3
Rating
0
P
PrintablesSmurftech

Scrub Daddy Pot Plant Holder

Partner wanted something cute to hold our scrub daddy while it dry's

Downloads
67
Likes
8
Rating
0
P
PrintablesDWP

Scrub Daddy (double) wall mount

• PLA/PLA+/PLA Matte/PETG/ • 0.4mm nozzle • 0% infill + 3 walls That's it!

Downloads
66
Likes
8
Rating
0
P
PrintablesNegative

Vertical Double Scrub Daddy Holder

Stores 2 scrub daddys vertically with drainage channels

Downloads
65
Likes
8
Rating
0
P
Printablestizmataz77

Simple Scrub Daddy Holder

Simple mount to hold Scrub Daddy in the sink. For me it was a little bit tight for my sink divider, but after a day or so it took the shape of the sink and fits very well now. I printed with the shorter side on the bed and supports…

Downloads
61
Likes
5
Rating
0
P
PrintablesLennoxX

Battery Daddy D-Cell to AA adapter

I needed more storage space for my AA Batteries and have no D-cell devices, so made an adapter to hold 3 AA's

Downloads
60
Likes
8
Rating
5
P
Printables3D4pets

Duckie the Duck Scrub Daddy Holder

Meet Ducky – the cheerful addition to the Scrub Buddy Holder collection 🦆 With his rounded shape, smooth curves and playful beak, Ducky brings a light and happy touch to your kitchen or bathroom. The integrated holder on top securely…

Downloads
59
Likes
13
Rating
5

Scrub Daddy Sponge Holder

A minimalistic Srub Daddy sponge holder: easy to print easy to clean Draining grid to dry the sponge overnight Enjoy cleaning!

Downloads
56
Likes
4
Rating
0
P
PrintablesXANA

Scrub Daddy Kitchen Sink Holder Double

Scrub Daddy Kitchen Sink Holder Double

Downloads
55
Likes
5
Rating
0