Counting matching models…
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
A legendary 3D model inspired by The Godfather —complete with the serious stare, suit, and that classic mafia vibe. Created with AI tools for movie lovers, collectors, or anyone who wants to add a bit of cinematic power to their print…
First, congratulations to Nigel Buckle, David Turczi, and the Mindclash team for this incredible game. It checks all of my big, heavy, space game boxes for both solo and co-op play. This insert took my brain by storm. The game trayz do a…
UPDATE 7/7/24: Added a PlayerBox V3 for users with sleeved cards. It's very simple and let a lot of room for cards in a 21mm tall box instead of 20mm. Insert for Voidfall Retail version. Contains: - player boxes (print x4) - Glory tokens…
Make sure that the air hose doesn't come out where the sand should - it need to turn at 90degrees angle 2-3cm down upper hole. It should work like this:
Inlay for voidfall I'm using the box for the shimming in view of the update for the future extension, which will make the adaptation easier. You can use it for split material in your table ;) I've tried turning the box upside down and…
Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66942/
Zombie Grandfather. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I've always hated the look of the exposed extrusions by the deck panel. It was unsightly and plastic boogers always find their way in there which was a pain to keep clean. I wanted to cover those, but also wanted to cover the gap between…
This prehistoric tree has been around since the dawn of time and has grown to be the largest living thing on planet Earth. The tree is rumored to be somewhere in the Great Congo rainforest although it has never actually been photographed.…
This is a tiny and easy to print grandfather clock. Looks super cute on your desk or would work well in a dolls house or just as a fun little toy! You can either print the watch mount and use a watch face so the clock really ticks or…
A cool decoration piece for a movie shelf or desk
tested and works great! I just added a higher angle version….
Installing the bedfans in the rear of the printer makes the air circulate more in a circle when combined with a nevermore micro. Combining two rear bed fans at 20% speed and a nevermore 0.5 at 60% speeds, I reach 30C chamber temps before…
Voidfall fleet tokens to replace the cardboard standard tokens. Each token can hold 3 cubes.
I wanted to build a full size grandfather clock but this seemed like an easier idea. Unfortunately, I can't print it yet because of a manifold problem that doesn't render the base properly. If anyone with Sketchup knowledge can help, I'd…
1:1000 Scale I designed this cool little ship as a small side project for fun, and I'm really happy with how it looks. I'm planning on designing more ships, which will come soon, so look out for those. This guy is inspired by several…
Usually you need two of these inserts: one for each of Common Supply trays.
A biblical Hebrew letter meaning God's love and faith in us and our steadfastness in him.
The galactic edition of Voidfall has some amazing trays… except for the fallen houses! We all know what a pain it can be in setup to go through all the trays, and the stickers on bgg do help but… I wanted a better solution! Inspired by…
The game didn't come with nearly enough of these for even our first game, so, I modeled some! There's a test file here for you to test out the fitment before printing the individual guilds. As for printing, at 0.20 mm layer height, I…
Prusa writes in the assembly instructions: While pushing the hotend assembly in, firmly tighten both thumb screws. Avoid pinching any cable between the screws and the heatsink! But i did not like the unprotected cables of the print and…
Love this amazing game, but it was a bit amazing how the hexes could move around vs each other. So I designed these trays for the hexes that attach to each other magnetically. It raises the board which is lovely for table presence, and as…
A local Farrier asked me to replicate the design of the 3DFarrier horseshoe interface, which allows horseshoes to be quick changed. Very interesting article about the inventor of this design:…
[Not my model – this is a reupload of this model , respecting the original license.] Original description: “Coral pattern earrings easy to print and pretty to wear.” These are a stylized coral pattern, quick and simple to print, and they…
a model of 1880's German grandfather clock in doll house scale featuring a quartz watch movement.
I really like this game. I do however struggle with table space and the fact that I prefer/need to have tokens and "stuff" neatly organized on the table. The house storage solution included in the galactic box didn't fit my needs so I've…
The Godfather - Don Vito Corleone - 1972
Para ser impreso en pla sin soportes.
Token replacement for the catastrophe tokens in the game Voidfall, used only in solo mode. One of my tokens got damaged, so designed these, thick and chunky. If you don't have multicolor printer, use a filament change in the right layer.…
Height is 90mm and Supports are needed are optimized in the 3mf file - I recommend to keep the settings.
Al Pacino,Godfather Wall Art
The Godfather - Michael Corleone - 1972
Miniature Grandfather Clock
Iconic Movie Moments - The Godfather - Horse Head Scene - 1972 3D printable model.
its a remix from the Stealthburner frontmask to use it as a Bedfan, for the Voron V2.4 NOT TESTED YET. Bedspacer must be around 22mm. It is a left ,right and a middle with 2 fans there. Housing is for all of them. Assembling schoud be as…
The STL is to big you have to scale it down. If you want to resize, scale only x and y. Z must stay as it is Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 250x333.33mm in size You may print at…
Es ist ein Adapter für Aquarien um einen Unterwasser Sandfall zu erstellen. Bei Originalgröße am besten mit 100% Füllung.
No Supports, Print with atleast 30-50% infill. Water pumps in from the sloped side and sand falls into the hopper. Designed for 1" Inner Diameter PVC/ Any other pipe.
The Godfather - Connie Corleone - 1972
Introduction An eye shield is a device intended to protect the eye after trauma, e.g. from an injury or surgery. It is placed over the eye and taped down to secure it in place. Please watch this video for instructions on how to apply it.…
The Godfather - Fredo Corleone - 1972
The Godfather - Kay Adams-Corleone - 1972
Einfacher Spraydosenhalter 3st. oder Wandfach Ist für Große Spraydosen geeignet 67mm durchmesser a 3St. L:218xT:78xH:100 Wandmontage mittels 3x4 Senkkopf Schrauben.
The Godfather - Santino Sonny Corleone - 1972
I built this EC1515B clock kit several years ago and it has just sat around without a case ever since. There are other 3d printable cases out there for these clocks, but me being me, I wanted something unique. To my knowledge, no one has…
I slightly remixed Hextra's great insert for Voidfall Galactic Edition and Arder Blackard glory tokens separator.
Modèle 3D de la carte Adjani Steadfast de Magic the gathering
The Godfather - Tom Hagen - 1972
A simple case and plate for the KBDFans KBD75 v3 PCB. I had a spare PCB, so I made this. The pins align with the PCB screw holes, so there are no screws needed. The two holes are for pushing the PCB out again. I suggest to print the…
Boquilla 0.4, multifilamento con M600 Category: Keychains
Meet Constant. With his arms outstretched, he clamps your favorite books. One more book? No problem, slide a new book in the middle and he stretches his arms even further. He likes books with a height between 19 and 23 cm (7.5" - 9"). For…
Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer. I noticed a hotspot…
The Godfather Logo With Backround
Material used: PLA Quality: 0.12mm for better results.
Tray to separate the Glory tokens in the Galaxy Box's original tray. Loved the original design (thanks!!) but I: wanted multicolor and the original design, if you moved it out the tokens fell. So I made it wider and added a small tab to…
Cute Godfather Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
Snowdon, or Yr Wyddfa, is the highest mountain in Wales, at an elevation of 1,085 metres above sea level, and the highest point in the British Isles outside the Scottish Highlands. It is located in Snowdonia National Park in Gwynedd.…
This is a stand for your headphones, and a fan at the same time. Form and function in one package. My headsetstandfan fitted with Noctua Airflow Amplifier. This uses a 120mm pc casefan. Cut the frame off, so that headsets fit better.…
Needed to create a Paiute deadfall to get control of a backyard rodent problem. Used a couple of paint stir sticks (27x4mm cross section), some nylon cordage, and a concrete paver. A bamboo skewer was used as the trigger stick with the…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
There are three versions of this model. Right-hand and left-hand threads and a straight slip-on style. The thread-on versions can be used with or without hose clamps depending on the fit in the dust collectin hose. Not all 4" hoses are…
motorcyclist figure, easy print, support needed :)
Diese kleine Fach passt super in den Getränkehalter in der Mittelkonsole. Es hebt den tieferen Getränkehalter auf die selbe Bodentiefe wie der auf der Beifahrerseite. Um alles wieder aus dem Getränkehalter ziehen zu können, besitzt das…
This is a corvette token for the board game Voidfall to replace the cardboard pieces. The token design is based off of the amazing Ian O'Toole's artwork, and has a slot to hold up to three Fleet Power cubes. Print Settings Printer Brand:…
über einen like oder einem folgen würde ich mich freuen ;-) und ein make darf gerne erstellt werden
Diese Rakete wurde nur anhand von Bildern erstellt und stellt kein Orginal der Rakete da. Sie besteht aus 3 Teilen und muss zum Schluss noch verklebt werden. Die Halter wurden auch nur konstruiert damit die Rakete hält da mir unbekannt…
Step into the world of classic cinema with this commanding 3D printable figurine that captures the essence of organized crime's most iconic character. This meticulously detailed STL model showcases a distinguished figure seated in a…
English : Since I switched to mechanical keyboards, I have tried different wrist rests, the right one was never there. I created one here, quickly, for my kbd67 from kbdfans: Width: 315mm Height between 10 and 19mm Depth: 100mm…
Added bedfans to fit the original extrusion cover. Added inverted z-chain files (inverted z-chain cover 1+2 and upper + bottom)
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Vorthak Broodfang 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Vorthak Broodfang is a monstrous…
So I was commissioned to make this Mini, the one on the right was a partially failed print that I used to test painting techniques before doing them on the mini I shipped. I made the moss with cottonballs and superglue. The Woodfall…
Support for the overhangs. Assembly: Remove backplate. Remove top plate (requires knobs and switch nut removal) Remove the standoffs on the side opposite the midi/cv jacks Slide center places into the enclosure, slotting CV jacks into the…
Best is to print it 2 colored or paint the text afterwards.
These are Voidstorm tokens to replace the cardboard tokens in the board game Voidfall. They provide a visual pop to the board that I think the cardboard pieces lack, and are sculpted to convey the spirit of the Corruption tendrils from…
Hope you enjoy my new storage designs. This is the first of many to come, once i test printed them. The feet need to be printed seperately and glued on later. I placed a modifyer for the tubed part for 100% Infill to make it a bit more…
This tray holds the Crisis and Alert cards for the board game Voidfall, and greatly reduces necessary table space and setup time. What would be NINE separate stacks of cards on the table (five Alert card decks and four Crisis card decks)…
Vhorlath Realms – Season II Reptilian Reedfang Pathfinder 3D printable STL miniature for dark fantasy tabletop RPGs, fantasy wargaming, miniature painting, collecting and display . Quick, alert and perfectly adapted to the overgrown ruins…
your kids favorite super hero or something.
This classic puzzle has a little twist. All 16 pieces have different shape and hole-count combination :) You can print two sets: a "classic" one and a “trick” version. In the classic version all round pieces have one pinhole, or all…
My take on Hextra's amazing Voidfall insert! I love his design, but really wanted to incorporate some tech and house card trays I had bought on Etsy prior to getting a 3d printer. These trays are awesome because they make finding the…
An organizer for lids for all those cups you have in your cupboard with a friendly name on the front.
Halloween Pumpkin hollow for LED tea light.
This is a sentry token for the board game Voidfall to replace the cardboard pieces. The token design is based off of the amazing Ian O'Toole's artwork, and has a slot to hold up to three Fleet Power cubes. Two versions of .STL files are…
Step into the world of classic cinema with this masterfully crafted 3D printable figurine that captures the essence of mob elegance. This detailed STL model showcases impeccable tailoring with a three-piece suit, overcoat, and walking…
Stačí vytisknout tyto dvě krabičky místo původních. Rozměry jsou totožné. Pouze v programu neumím zaoblit rohy.
Hello, Sharing my model of dollhouse grandfather clock for miniature house. Made in scale 1:18 - feel free to rescale if needed. Dimensions: 28x14x109mm Some supports required - all set up in .3mf file :) 🚀 Want to sell prints of my…
I was looking for a way to reduce the game’s footprint, and this idea came to me. The only downside is that your opponents can’t see your tech cards.
This is a destroyer token for the board game Voidfall to replace the cardboard pieces. The token design is based off of the amazing Ian O'Toole's artwork, and has a slot to hold up to three Fleet Power cubes. Print Settings Printer Brand:…
Just the propeller printing requires support. Other parts with proper orientation should print OK. No glue or other HW needed. Due tight tolerances well tuned printer is required. The Pins are most critical, if needed you can zoom X&Y…
Step into the world of cinematic legends with this masterfully crafted 3D printable figurine that captures the essence of classic film noir. This detailed STL model showcases a distinguished gentleman in an impeccably tailored suit,…
Englisch I am offering two heads for stand torches and the corresponding flame for medieval brick dioramas. The torches can be equipped with WS2812 or other LEDs on a round circuit board with a diameter of 10 mm for lighting. The torches…
Included is examples on what you could put in the badge as well as a blank badge so you can put whatever you want on it. Please share your custom badges I would love to see them! Note for creating your own designs, make sure the cuts are…
![Armored Cruiser HMS Steadfast [Fictional]](https://media.printables.com/media/prints/1053903/images/7984826_796e33b2-d202-4fb3-bf6f-ff09c7f352e7_7dbdff60-884a-4df3-bf79-9a4aba963266/screenshot-2024-10-25-211355.png)
