Search results: dishy

Sort order

43 models

P
PrintablesMattHecht

DISHY MOUNT FOR SATELLITE DISH POLE

This mount was created to mount the StarLink dish to an existing satellite dish pole. The mount uses a 2" hose clamp to holed the mount to the satellite pole. Feed the StarLink cable through satellite pole and through the mount, then plug…

Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
2
Rating
0
P
Printableschadfawcett

Starlink Rectangular Dishy Flat Mount Bezel

Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…

Downloads
1,321
Likes
70
Rating
0
P
Printablesjazzhavingfun

Starlink Rectangular Dishy Flat Mount

This is a remix of @chadfawcett_690675 original design. Updated the dimensions for a snug fit. Increased the height to 5mm taller to clear the cable from rubbing on the PCB as well as the acrylic sheet from rubbing on the PCB connector.…

Downloads
804
Likes
63
Rating
5
P
Printabless0

Starlink Dishy v2 Winegard (1.5inch) bushing adapter

There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…

Downloads
436
Likes
34
Rating
5
P
Printablesawkaplan

Starlink Dishy V4 Pole Mount

Settings: Material: Polymaker ASA Nozzle Size: 0.6mm Layer Height: 0.4mm Infill: 100% Requires: 1x Long hex bolt 1x Nylock nut 2x Fender washers

Downloads
412
Likes
22
Rating
5
P
PrintablesRandy Ubillos

StarLink gen3 Dishy RV Bracket

We recently added StarLink to our RV. This is a set of models for mounting the gen3 “standard” flat panel to the back of a storage bay door. The bracket is printed in 4 parts which fit together. The “Right Upper” piece has an “Arrow”…

Downloads
382
Likes
75
Rating
5
P
PrintablesALu

Starlink Dishy V2 Housing for Flat Mount

Update: I also included the Fusion 360 file so you can make adjustments. However, I did not translate it, so it's in German ;-) This is a 1-part or 4-part housing for a Starlink standard rectangular dish. It can used as a flatmount (dish…

Downloads
354
Likes
25
Rating
0
P
PrintablesLawrence H

3D Printed Case for the Starlink Dishy DC Power Supply and PoE Injector

This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999 The video showing Everlanders design and printing can be seen here:…

Downloads
344
Likes
29
Rating
4
P
PrintablesBootStrap

RV / Boat - Dishy Mount - Starlink

This is a design made by Donald Scott (Facebook Starling Forum) Made to fit Rails with 22-32mm diameters. Rotates completely to accommodate horizontal, vertical, or any angle rails. Ethernet cable can be ported on the inside railing that…

Downloads
312
Likes
57
Rating
5
P
PrintablesNeil Atkinson

Starlink Flat Mount Dishy Adaptor

Printed using PETG, model took approx 24hrs to print. Suggest using heavy brim lines and a hotter than normal build plate to avoid warping. Printed on an ender 3 s1 pro.

Downloads
264
Likes
37
Rating
0
P
PrintablesTechnicalTingz

Harbor Freight 20ft Flag Pole Starlink Dishy Mount

I needed a Starlink square Dishy mount for the Harbor Freight 20ft telescopic flag pole on my RV. All the existing models I tried didn't fit snug or didn't lock-in the Starlink, so I decided to model my own. This model fits snug on both…

Downloads
259
Likes
49
Rating
5
P
PrintablesTinkrMakr

Starlink Dishy Cord Plug Cover

I liked the cover for the router end that I found here https://www.printables.com/model/322857-starlink-ethernet-adapter so I decided to make one for the dish end of the cable to go with it.

Downloads
233
Likes
21
Rating
0
P
PrintablesMike

Starlink dishy mount for a 25 mm reeling

You can mount you starlink dishy on a reeling. You just need 4 M5 x 16 screws with nuts. You may attach an additional safety wire to your dishy, just in case :-) I printed it on a MK3s with PETG 0.15 layer height and 25%.

Downloads
222
Likes
17
Rating
0
P
PrintablesJomogalla

Starlink Dishy Straight Foot Adapter

A small adapter to get a flat surface for washers/nuts/bolts on the included dish stand.

Downloads
213
Likes
42
Rating
5
P
PrintablesNicG

Starlink Dishy V2 (Gen 2) (Dishy McFlatFace) Post Mount

I was looking for a way to have my Starlink Dish mounted on a fence post at my property and could not find anything suitable so I created my V1 Dishy Fence Post Mount for the Gen 1 version. NOW, thanks to the unwanted attention of some…

Downloads
178
Likes
17
Rating
0
P
Printablesrvsuper8

Starlink Dishy Gen2 Flat Mount

Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…

Downloads
164
Likes
19
Rating
0
P
PrintablesRandy Ubillos

StarLink gen3 RV Dishy Ladder Mount

This project consists of two brackets and an adapter. It uses the StarLink Pipe Adapter and this telescopic extension pole that I got from Amazon. The brackets are designed to fit around a ladder with 1" vertical tubes. It's a very tight…

Downloads
147
Likes
25
Rating
5
P
PrintablesJoe Fincher

Desktop Dishy: Small Scale Starlink Model (Work in Progress)

*This is still a work in progress but I wanted to upload what I have so far .* After installing my Dishy McFlatface at my house, I thought it would be fun to have a small scale version for my desk at work. It's roughly 2" by 3.5". The…

Downloads
145
Likes
18
Rating
0
P
PrintablesF F

Starlink v2 "Dishy" Standard Stand adapter M4-M5 Bolt

this is a stand adapter for starlink v2, the rectangular one, to mount the standard kit base with nuts and bolts more easly, the inner hole is fo a m4 and M5 screw. I attached it to a magnet with m5 screw to avoid drilling hole on my roof…

Downloads
114
Likes
13
Rating
0
P
PrintablesRob

Starlink Dishy Gen3, riser feet

Riser feet for the new Starlink Dishy gen3, keeps the dish from actually being on the ground

Downloads
112
Likes
30
Rating
0
P
PrintablesGaloreous

Starlink Dishy 1:10th model

Tired of waiting for my dishy to come so I made my own.

Downloads
103
Likes
7
Rating
5
P
PrintablesTrackZero

Starlink Dishy 2 to Wilson/weBoost Antenna Mast Adapter

Print in ASA for better UV protection; I used 50% infill and the 20mm SPEED profile. There's an inner ridge that the Dishy will click into, and a screw hole to keep it from spinning around in the Wilson weBoost mount.

Downloads
67
Likes
3
Rating
0
P
PrintablesTonyK

Modified Starlink Dishy Mount

This Starlink mount fits into a standard 80mm drain/waste pipe and provides an extremely strong mount for Dishy. I sprayed mine with white paint after completion to give further protection from the elements. Slide the mount into the top…

Downloads
66
Likes
10
Rating
0
P
PrintablesTinkrMakr

Starlink Dishy 1.25 inch Pole Mount

Starlink Dishy 1.25 inch clamp on pole mount for fiberglass (or any) pole. should not require any supports to print.

Downloads
65
Likes
7
Rating
0
P
PrintablesNicG

Starlink Dishy Post Bracket (NZ)

I was looking for a way to have my Starlink Dishy mounted on a fence post at my property and could not find anything suitable. This version works with my New Zealand Starlink Dish and screws down onto the top of a fencepost. I have had it…

Downloads
62
Likes
12
Rating
0
P
Printablesbitwiz

Starlink Dishy Pole / Pipe Mount Adapter (for Square Dish)

Permanent-mount Starlink Dish Adapter This is a custom-designed adapter to mount the square Starlink satellite dish - fondly known as "Dishy" - to a 1" threaded galvanized pipe that is set in concrete. I created the adapter to make a…

Downloads
58
Likes
7
Rating
0
P
Printablesrvsuper8

Starlink Dishy Dualie DC Power Supply v3

Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…

Downloads
41
Likes
2
Rating
0
P
PrintablesMr.Supp

Starlink Dishy adapter

Adaptér mezi anténu Starlink Dishy (Standard Actuated - prostě hranatá natáčecí) a tyč s křížovým zakončením, například (https://1url.cz/11eui). Jelikož tyč je zpravidla třeba do země zatlouci a křížová sekce se poškodí, je X vstup širší…

Downloads
40
Likes
10
Rating
0

Boondocker Dishy Dualie Enclosure

Enclosure for Boondocker's Dishy Dualie revision v1.5a. Features Tapered walls above the ethernet ports for easy access to the release Dishy Enabled LED Indicator Parts Assembled with 4x M3x20 cap head hex bolts

Downloads
40
Likes
1
Rating
0
P
Printablespfrench

Dishy to two inch pipe adapter

Starlink Dishy to two inch pipe adapter. [EDIT] Important printing notes: print this in ASA if you have it because it's UV resistant I printed mine top-side down, with supports. (Top as mounted, the smaller opening facing the printing…

Downloads
37
Likes
1
Rating
0
P
PrintablesLeolessa

Starlink Rectangular Dishy modular Flat Mount

Disclaimer: This will definelty void your warranty, you can easily break your very expensive starlink dish, do not try this if you are not confortable with DIY projects. IM NOT RESPONSIBLE IF YOU BREAK SOMETHING, DAMAGE PROPERTY OR HURT…

Downloads
35
Likes
6
Rating
0
P
Printablesrvsuper8

Dishy DC 48v Power Supply Container

Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…

Downloads
31
Likes
7
Rating
0
P
PrintablesMove3D

Starlink Dishy Gen1 pole mount TV/SAT

Starlink Dishy Gen1 pole mount TV/SAT diameter 40 mm

Downloads
30
Likes
3
Rating
0
P
Printablesbeckeeper

Dishy Gen 2 Mount for Umbrella Stand

Many thanks to bitwiz for providing their original Fusion files; I was able to measure the umbrella stand in question and make the changes we needed quickly and easily. You'll find the Fusion file (as well as STL and STEP files) so you…

Downloads
15
Likes
2
Rating
0
P
PrintablesNealF

Starlink Dishy V2 (Gen 2) Post Mount Magnetic

I have printed this in PETG 0.2 with no supports. Magnets used are 15X4 with M3X12 countersink screws. I am trying to find some thin felt to cover the face and prevent scratching the paint. Grips well but only for stationary use. My dish…

Downloads
15
Likes
3
Rating
0
P
PrintablesSergej

Starlink dishy 2 flatmount for front runner roof rack

Flat mount with relatively low profile. Gets rid of the proprietary Starling plugs. Design uses IP 65 Ethernet plugs ( coupler and plug .) The base uses a 3mm polycarbonat sheet for the bottom. Hard ware is M3x20 and M3x16. Threads use…

Downloads
13
Likes
4
Rating
0
P
PrintablesSergej

starlink dishy 2 cutter

After scoring use a sturdy knife and a rubber to split the case of the dish in order to flat mount it.

Downloads
10
Likes
1
Rating
0
P
Printablesrvsuper8

Starlink Dishy Gen2 Flat Mount

Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…

Downloads
8
Likes
2
Rating
0
P
Printablesrvsuper8

Dishy DC 48v Power Supply Container

Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…

Downloads
8
Likes
3
Rating
0
P
Printablesrvsuper8

Starlink Dishy Dualie DC Power Supply v3

Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…

Downloads
6
Likes
4
Rating
0
P
Printablesrvsuper8

Dishy DC 48v Power Supply Container

Container to hold the 2 components. You will need 2 4mm inserts 3mm screws. Power your router and dish using a MGGi DC Booster Voltage Regulator, 12V Step Up to 48V 3A 145W Converter AND A LM2596 DC-DC Buck Converter Step Down Module…

Downloads
4
Likes
2
Rating
0
P
Printablesrvsuper8

Starlink Dishy Gen2 Flat Mount

Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…

Downloads
2
Likes
2
Rating
0
P
Printablesrvsuper8

Starlink Dishy Dualie DC Power Supply v3

Starlink Dishy Dualie DC Power Supply v3 Created primarily to give you a hole pattern and sizing for any case you might want to design or to embed into a flat dishy design. File supplied by the vendor. Thank you Matt Thompson. Designed…

Downloads
2
Likes
4
Rating
0