36 models
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink. Currently the parts are designed that you need exactly one of each. Height of overhang: 4,6 mm…
A remix of Otvos5i custom Dedica driptray for bottomless portafilter. I also like to use bottomless portafilter for my Dedica. This drip-tray is a great addition for the machine. I added a bigger hole in the middle that the last drops can…
Collection of 5 Driptray Variants for the Bisasam / Bulbasaur Planter I designed these as I noticed a driptray is often asked for regarding the Bisasam Planter. Here's the link to the planter itself: Cute Bulbasaur / Bisasam Planter…
The Krups Essenza Mini comes with two tiny driptrays. One is full after two cups of coffee, the other is always near empty. So I created a single compartment which does fit the original parts.
The water reservoir for used water on my coffee machine always got full pretty fast. I designed a bowl that fits the geometry of the tray and can be put under the spout. It catches the first and last rins the machine does after turning on…
This Driptray can snuggly fit onto the Heygears Reflex RS Resin Tray. I created it, because when lifting the finished print i always had problems with Resin dripping everywhere. Now, you can just remove it and rotate it more easily to…
Saeco Moltio drawer, drip tray for brew group unit/brewing group. Suitable for the coffee machines: HD8766/01-09 HD8767/01 HD8768/01-03-05 HD8768/08-09-43 HD8769/01-11 HD8769/08-09-19 HD8778/11 ############### Saeco Moltio Schublade,…
Driptray replacement i made, the hole could be aligned better, so i added the step file for it
A Driptray to prevent Water dripping down into the lower Half of the Sodastream Duo.
My older family members have a permanent counter stain from the wet spoon being set on the countertop after stirring their sugar and cream in. I made this to be able to easily clean up by changing a paper towel or washcloth so that the…
My wife requested new way to store wet sponges after old solution has failed. I designed holder that can fit 3 big sponges with mesh inside to collect water beneath. Internal size is 190 x 92mm. Mesh is printed without top and bottom…
I couldn't find a drip-tray for my Orea V3 pour-over coffee dripper, so I designed one on my own. Don't be too harsh on me as this is my first attempt in 3D modelling in Shapr3D. Driptray has some tabs on top that should have a snug fit…
Saucer for the Biasam planter for bigger ones you can scale them up, at these pictures there is 100% and 200%
Here is the revised Low Profile 3D Print DripTray with larger magnets. Holds much better. Stands more stable, especially with water in the tray. For 6mm x 3mm magnets
This driptray is for use with Dr. Brown's Options+ bottles. It will suit both sizes of the bottle, the smaller one is depicted in the accompanied pictures. This prints without support, but multiple prints might be necessary when…
A simple lid for the drip tray of the Keurig K-Express coffee maker. A friend's dog at theirs, so made this up for them. Interestingly, I printed one out of PLA and it held up fine for a few weeks. Then I replaced it with one of PETG.…
A driptray I designed myself since I didn't finde any suitable ones. It fits my sink perfectly so don't expect it to be perfect for yours. I recommend cutting the edge of one side off to print it and hold it against your sink to check! It…
I wanted to put the filter of my teapot somewhere so it can drip and dry off between brews, so I made this. Fulfills its purpose perfectly. Should you have a filter with a different diameter, it's easy enough to adjust the model. Feel…
I made this water container fitting for a WMF 1100 as we did not had nothing suitable. Print in PETG (or ABS) 6 Perimeters It is possible to print this without support, but needs some cleaning in the overhang areas. Do not put it in the…
Für die kleinen Dinge die man beim Anwaschen benötigt.
The VARIERA is perfect as a little bin for you shampoo and shower gel, but it lacks some drainage and the underside of the bottles get grimy. Pro tip: Also drill some holes in the bottom of the VARIERA, to get rid the water.
Unlike the original design, I flipped the drip tray and adjusted its dimensions so it stays securely in place during use and doesn’t fall out after assembly. This model is also designed to naturally return to its original position,…
This is a simple flower planter. It consists of two parts, the actual planter and a driptray, which slide into each other. The slanted seam between the two parts acts as a design element. The planter is not touching the bottom of the…
Tired of shaving dust or water droplets in your Bathroom? With this Shaver Holder it is a Thing of the Past ! Just prop it up to the throne it deserves, for getting you a smooth finish every day ! It catches water droplets after cleaning…
easy mounting Driptray everything is clickable. pin can be mounted on different hights and directionele by clicking. can be easy disassembled for dishwasser Designed for 0,08 mm layer hight support needed.
Just a Drip Tray for the SodaPump. I use PETG because its easier to clean. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: AzurFilm PETG Category: Kitchen & Dining
Vibiemme Domobar driptray-scale, (way-to-permanent) Prototype v1
A driptray to get condensation water further away from wall. Fits Mitsubishi MXZ-2F53VFH3 heatpump. Print in PETG or other weather proof material.
Delonghi Drip Tray extender allows you to put a larger object on the drip tray. Perfect to add a larger bowl when doing descaling.
This is a replacement driptray for the SodaStream Enso.
A driptray I designed myself since I didn't finde any suitable ones. It fits my sink perfectly so don't expect it to be perfect for yours. I recommend cutting the edge of one side off to print it and hold it against your sink to check! It…
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
The VARIERA is perfect as a little bin for you shampoo and shower gel, but it lacks some drainage and the underside of the bottles get grimy. Pro tip: Also drill some holes in the bottom of the VARIERA, to get rid the water.
I wanted to put the filter of my teapot somewhere so it can drip and dry off between brews, so I made this. Fulfills its purpose perfectly. Should you have a filter with a different diameter, it's easy enough to adjust the model. Feel…
