15 models
Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…
Update 2023-10-18: Added robot_better_hands_and_neck.stl that improves the neck supports so that half the neck doesn't fall apart during printing. Only use it for large prints that are at least 200% scale. Description: The hand is now…
These brushes match the original soft brushes for Roomba 5, 6 and 7 series, but are more durable. The brushes printable from here rely on axles from the original brushes, so don't discard worn brushes, just strip the foam and keep the…
1/4 inch socket storage with replaceable inserts. Stores 14 sockets on a 1x3 footprint. Use grid_socket_clip_A.stl for a looser fit and grid_socket_clip_B.stl for a tighter fit. Both were able to hold my 14mm socket upside down. I used…
I took the model created by tjsoco, which was already looking more reliable than other people's designs, and upgraded it further to use 30% less plastic and be more reliable. 1: I made the hole tapered to have a tighter fit, this ended up…
M20 Thread + Nut. - increased clearence for better 3D print results - rounded edges for more durability
I made a little tool you can put into screwdriver so you can put a hook into the ceiling. Use the size according to the width of the hook you want to screw in. Print with 100% infill/PLA - PETG works really well too
A modified version of the model uploaded by rpgweb_101633. I made the cutout wider, so that there is no overhang, when the model is printed on its side (see the second picture). Printing the model on its side is preferable in my opinion,…
Remix of https://www.thingiverse.com/thing:5447123 with following changes quickly implemented using Blender ( with the main aim of making it more durable, as the original broke quickly for me): Added scaled sphere near bottom as otherwise…
This is an edit of the wonderful Digimon Pendulum COLOR Case uploaded by jyoshi1909 on Thingiverse, which itself is based on the vintage iremon cases. This version has been edited to make it easier to print on FDM printers and to improve…
The absolutely gigantic model that could test how long your printer could go without breaking, exploding, imploding, freezing, thermal runawaying, or running out of filament. MAKE SURE you have a brand new roll of filament before…
I refer to om_hb original page for the general and original description. Print on its side for extra strength.
This is a optimized variant of my original lawn trimmer blades for more impact-resistant TPU materials. Standard rigid plastics like PLA or PETG tend to be too brittle for this application, causing the blades to shatter or snap almost…
A modified version of the model uploaded by rpgweb_101633. I made the cutout wider, so that there is no overhang, when the model is printed on its side (see the second picture). Printing the model on its side is preferable in my opinion,…
I refer to om_hb original page for the general and original description. Print on its side for extra strength.
