High durability replacement snow shovel handle for 29mm wood. remix with 30% plastic savings and better reliability.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of a good handle model user tjsoco uploaded, however I have introduced several improvements.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 183
- Makes
- 2
- Views
- 694
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I took the model created by tjsoco, which was already looking more reliable than other people's designs, and upgraded it further to use 30% less plastic and be more reliable.
1: I made the hole tapered to have a tighter fit, this ended up being strongly needed since I forgot snow shovel wooden poles are tapered for the handles.
2: I brought the distance of the handle in towards the body by 2cm.
3: I widened the sides of the print to be thicker and stronger.
4: I took the 4cm wide handle (Which was far too large) and created a 3cm and 2.5cm version.
5: I clipped and shrunk the half-spheres that protruded out the sides.
I installed this with wood glue and a single torx 1.25" construction screw.