Search results: ebo

Sort order

Counting matching models…

P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,407
Likes
360
Rating
4.89
P
PrintablesFerro_Ignis

Hexbook (Notebook / Sketchbook A4). Hex book

I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,548
Likes
1,052
Rating
4.89
P
PrintablesGuZZLo

Bigger Sidebox Prusa i3 MK3S

Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…

Print approx. €7.06–€8.62 excl. taxPreliminary estimate for one variant

Downloads
1,562
Likes
237
Rating
4.57
P
PrintablesPhilippHee

Magnetic Whiteboard Pen Holder

Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…

Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant

Downloads
1,021
Likes
148
Rating
4.89
P
Printables3Demon

The Key to Erebor - Hobbit

This is a digital 3D printable model of The Key to Erebor from The Hobbit . The download contains a 3D model ready to be 3D printed on a 200 mm print bed. (STL) SIZE At 100% scale, the model’s dimensions are approximate: Width 133 mm…

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant

Downloads
954
Likes
333
Rating
4.92
P
PrintablesAllpa

Honeycomb-Shelf for Toniebox / Waben-Regal für Toniebox

Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to The honeycomb shelf is invisibly attached to the wall with the base plate. The…

Print approx. €4.88–€5.97 excl. taxPreliminary estimate for one variant

Downloads
949
Likes
114
Rating
4.85
P
PrintablesMatt Boyer

Debowler

A debowler (ashtray) slightly modified for ease of use. Wide landing spots for stogies and a center spire capable of gouging out bowls. A smoker's tray. Print instructions I used PETG because it stands up to the heat a little better.…

Print approx. €9.10–€11.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
807
Likes
87
Rating
5
P
PrintablesBen

Emergency Debonair Card (Spare Cufflinks)

I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
776
Likes
436
Rating
4.86
P
PrintablesDave

Gameboy Cartridge

Yet another Gameboy Cartridge. Includes classic or "newgrip" styles and OpenSCAD file. Print with build plate supports, 0.2mm layer height

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant

Downloads
561
Likes
107
Rating
5
P
Printables3DMonkey

Ultimulti with double lock for Coreboxx

Ultimulti version for Coreboxx with double lock mainly to prevent fails I had with slots number 4 and 5 after sometime of use of the original with 1 lock. I made my own compilation of part I'm use, with this I have increased reliability…

Print approx. €13.90–€16.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
271
Likes
55
Rating
5
P
Printablesvrata48

Notebook Stand (DELL Precision 7540)

Lightweight stand for notebook, designed for Precision 7540. Can be used with other models with similar dimensions. The main goal was to have stand that can be easily taken apart and does not occupy too much space in the bag. No supports,…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
18
Rating
5
P
Printableslvisintini

Gameboy Advance maintenance/display stand

This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant

Downloads
230
Likes
55
Rating
5
P
PrintablesRapidSpatz

Light Baffle for HOMEbox Ambient Q60+

Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.

Print approx. €7.69–€9.40 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
24
Rating
0
P
PrintablesMIJ90175

Bracket for hidden Apple Airtag on Segway Ninebot Kickscooter MAX G30D II

I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…

Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant

Downloads
204
Likes
25
Rating
5
P
PrintablesSuperTed

Prusa MK3/S/+ Mesh Sidebox 2.0 Redux

I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…

Print approx. €7.63–€9.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
203
Likes
32
Rating
5
P
Printablesmkoistinen

Quartet Glass Whiteboard Marker Holder

I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.

Print approx. €6.15–€7.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
189
Likes
18
Rating
4.5
P
PrintablesJoergH

Metabo LB18 Laubbläser - Flachdüse gebogen - Leaf Blower Nozzle

Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…

Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
177
Likes
13
Rating
5
P
PrintablesPeter Farell

Mocking Spongebob : Meme

Mocking Spongebob : Meme

Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
52
Rating
5
P
PrintablesZohan#4775

MK4 Nextruder LoveBoard Cable Cover Right R2

Geändertes Cover, das besser passt und Probleme beim Kalibrieren der X-Achse verhindert da das original Cover manchmal nicht ganz anliegt ########## Übersetzung des original Textes von @Stefan_106413 ########## Die originale Abdeckung für…

Downloads
154
Likes
25
Rating
5
P
PrintablesFC2M3D

Pixel Pikachu (Gameboy 2000) Keychain

Easy to make Pikachu pixelated from Gameboy game of 2000 keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
153
Likes
38
Rating
5
P
Printablesbkerler

Coreboxx Service Hatch Support

Support for coreboxx premium version mmu3 service hatch in order to make sure that the plexiglass doesn't break. Mount with 4 M3x18mm screws with 4 M3 Washers and 4 M3 selfsecuring Nuts to the coreboxx.

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
37
Rating
4.91
P

Gridfinity Moleskine Notebook Holder

Simple gridfinity holder for two notebooks. Requires 5x1 squares on the gridfinity base. Perfectly fits a large (5 x 8.25") Moleskine notebook. A Maker's Notebook will hang off the edge, as shown. Use only as directed--gridfinity storage…

Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
33
Rating
5
P
PrintablesPeter Farell

Grey Rhebok : Antelope Skull

Grey Rhebok : Antelope Skull

Print approx. €13.86–€16.95 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
56
Rating
0
P
PrintablesMik Fik

Spongebob

Sponge holder

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
141
Likes
38
Rating
0
P
Printablesbaua1356

Modularer, magnetischer Stiftehalter / Stiftebox

Ich biete euch hier einen modularen, 3 tlg. Stiftehalter für euren Schreibtisch. Die Magnete sind in der ersten Version nur in der Mitte, in der V2 sind es zwei je Seite. Die Magnete sind 5x1,5mm groß. Es sind aber auch die 3D Modelle zum…

Print approx. €9.32–€11.39 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
19
Rating
5
P
PrintablesHellcatless

Prusa Mk4 sidebox/toolbox

Right and left versions of empty boxes and left side there is also toolbox version. Inside the toolbox there is slot of original prusa mk4 tools.

Print approx. €5.43–€6.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
19
Rating
5
P
PrintablesPeter Farell

Spongebob Taking a Bath. (LuimaAI Generated)

SpongeBob Taking a Bath. (LuimaAI Generated) Added UV Displacement with LumaAI texture.pic Smoothing around tub. Upscaling texture maps in stable diffusion is more of a pain in the behind than just doing some selective sculpting. The…

Print approx. €5.38–€6.57 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
24
Rating
0
P
PrintablesIV3ZAJ

Case for Gameboy Color

i made a case to hold my gbc after countless hours of tweaking i think its ready to share. if you have any questions please feel free to comment and ill try and help out as much as i can

Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
10
Rating
0
P
PrintablesH3phaestus42

Gazebo Connector Bracket

A connector bracket for a gazebo's frame

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
9
Rating
0
P
PrintablesMrViddy

Facebook Keychain

4mm base and 0.8 color change (0.2 layers = 4 layers) Cut Down if need be Facebook1: 35mm x 27mm Facebook2: 35mm x 27mm 6mm Keyring hole

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
13
Rating
0
P
Printableserdnatter

GEPRC Cinebot 30 Gopro and TBS M8.2 GPS mount

GEPRC Cinebot 30 GoPro mount with integrated mount for TBS M8.2 GPS module Remixed “Cam mount for GEPRC Cinebot 30 (Gopro 8 9 10 11 12 & DJI Action 2)” form Lenny B FPV The picture shows the part printed with Prusament PETG, 0.15mm, 100%…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
88
Likes
1
Rating
0
P
PrintablesRutgerM

Hot Wheels magnetic holder whiteboard or fridge

A shelf that has room for 5x5mm round magnets to display hot wheels or other 1/64 scale model cars on fridge or shelf Works with 2 magnets, but has room for 5. Have printed in pla 15% infill.

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
17
Rating
0
P
PrintablesNick Berardi

Ikea Kludd Glass Whiteboard/Noticeboard Mounts

My Kludd hardware started chipping after many years of use, so I mocked up and printed an exact duplicate for the original Ikea Kludd hardware. I recommend printing this with PLA+ or better, and using the 0.20mm Strength option in Prusa…

Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
7
Rating
5
P
PrintablesMonkey Prints

Magnetic Pen Holder for Whiteboard Marker

Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
14
Rating
5
P
PrintablesScrap King

replacement glovebox handle Mitsubishi Delica L400 S1

The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…

Print approx. €3.96–€4.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
6
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
5
Rating
0
P
PrintablesClamikra

Segway Ninebot Max G2 Adapter for Abus Sportflex 2504 or a bottle standard holder

I needed a light and quick to apply lock for my new Ninebot Max G2 eScooter. The Abus Sportflex 2504 was my choice. It’s small, light weight with a 90cm retractable cable quite long, keyless with a 4 digit code lock and mounts into the…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
14
Rating
0
P
Printablesr00f

ABUS Granit XPlus 540 lock holder for Ninebot Max G30

Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
9
Rating
0
P
PrintablesKizzard

Ecovacs Deebot Brush Roll Shaft Adapter

Some older models of the Ecovacs Deebot have a brush roll with a keyed shaft which requires a square adapter to fit into the robot. This is a tiny part and easy to lose. Should fit: Deebot Ozmo 900 / 901 / 930 / 950 / 960 Deebot M87 / M80…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
10
Rating
0
P
PrintablesTobipooh

Stabilo Stiftebox

Eine Stabilo Stiftebox für 37 Stifte mit mit haftendem Deckel

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
15
Rating
0
P

Ornament Facebook Jail Repeat Offender

Facebook jail ornament for Christmas trees. You will need an itsy bitsy tiny drop of epoxy glue to hold the three parts together (unless you print them as one using the MMU2S).

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
15
Rating
0
P
Printablesstritti

Robot Vacuum Cleaner-friendly Raiser for Sideboard - parameterized

Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
22
Rating
0
P
Printablesdodasch

Debowler Lid with GL45 thread

a Debowler Lid with GL45 thread for Arizer Stems for your avp You need additionally one flask with GL45 thread, just search for “GL45” in the www choose your debowler spatula, wether you have the round sieves or the flat ones use the .3mf…

Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
10
Rating
4
P
PrintablesHagelstone

Ninebot G 30 D adapter to ABUS 453427 bracket (ABUS EaZy-KlickFix)

Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…

Print approx. €3.89–€4.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
5
Rating
0
P
PrintablesMNTrailBoss

Titebond 32 Oz (946mL) Glue Stand

This guy stores the larger Titebond glue bottle upside down so it's ready to pour when you need it. Included is the .stl and a 20% infill .bgcode file if you want to just go for it – setup for the center of my Prusa MK4. Note that ironing…

Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
11
Rating
0
P
PrintablesCannaCreator

Sliding Modular Whiteboard Drawing Templates

Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…

Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
15
Rating
5
P
Printablesayjay

EggBot, EggDuino, SphereBot Remix

This is my remix of herbert_b1's EggBot. The main change is that on the main body, the pen holder has been removed and replaced with a modular box. Now you can use the Eggbot without a side box or with any you want. I designed three…

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
7
Rating
5
P
PrintablesReinhard

Teebox normal

Dies ist die zweite von mehreren Teeaufbewahrungsboxen. Sie ist wie am Bild erkennbar stapelbar.

Print approx. €5.00–€6.12 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
4
Rating
0
P
Printableslvisintini

Gameboy DMG maintenance/display stand

This stand comes in handy to repair or mod Gameboy DMG handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…

Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
4
Rating
0
P
Printablesstefancham

Prusa Enclosure SideBox for MK4 inside

Sidebox right for Enclosure with MK4 inside (and for additional spool holder) Why a new box??? First I print this one: Prusa Enclosure SideBox von XBurgy | Kostenloses STL-Modell herunterladen | Printables.com I thought I can use it, but…

Print approx. €8.69–€10.62 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
4
Rating
0
P
PrintablesKierAS

noga do namiotu ogrodowego / gazebo leg

noga do namiotu ogrodowego / gazebo leg Print instructions PETG - used pretty petg profile

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
1
Rating
0
P
PrintablesLudo B

Gebogen oorringhouder. Curved earring holder.

Om oorbellen op te bergen of om ze ten toon te stellen. To store earrings or to display them. groeten Ludo

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
8
Rating
0
P
PrintablesKiko64

Bomber DJ rebound cover

Marzocchi Bomber DJ rebound cover in a bit different design - shorter and wider. Has all the features as the original cover - thread, surface for sealing, its lighter and you can print it in a color that suits you. The height is minimal…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
3
Rating
0
P
PrintablesThibLM

Simple Witheboard Magnet (Extra magnet Size)

Remix from Dodox. Added extra design to put different size magnet : 10x3mm 8x3mm Ask your magnet size on comment section ! Post your makes!

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
2
Rating
0
P
PrintablesReinhard

Teebox groß

Dies ist die erste von mehreren verschieden großen Teeaufbewahrungsboxen. Sie sind wie am Bild erkennbar stapelbar.

Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
2
Rating
0
P
PrintablesLuce

Curtain Hook for Deck Gazebo

Needed a hook like a shower curtain hook for the curtain type walls on the gazebo on my deck... Bought plastic shower curtains from Lowes for year 1. Many of them got super brittle during year one and I needed replacements for year 2..…

Print approx. €4.94–€6.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
5
Rating
0
P
Printables3DPrintM.D.

Glue stick and tool holder for Bigger Sidebox Prusa i3 MK3S

This is a tool and glue stick holder that fits on top of GuZZLo's left side "Bigger Sidebox Prusa i3 MK3S" remix. Print instructions Suggest lowering the speed of the first layer. I used 50% with PETG filament.

Print approx. €2.94–€3.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
5
Rating
0
P
Printablesakamaka

Covers SideBox and SideKickBox

Covers Side-Box and Side-Kick-Box option. https://www.prusaprinters.org/prints/122767-sidebox-sidekick https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right

Print approx. €4.35–€5.32 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
3
Rating
0
P
Printablesmiri

V2 of Noticeboard extension / hook / clip / peg

peg remixed to hold posters etc… Hookbit almost everywhere! lite version weighting only 3 grams available here: https://www.printables.com/model/1395752-v2-lite-of-noticeboard-extension-hook-only-3-grams

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
4
Rating
0
P
PrintablesSimdas007

Niceboy hive pins safety case

Niceboy hive pins safety case I use this gadget for my headphones when I put them in a bag because I don't think they are safe in there. There is a small hole on the bottom side of the case for pulling out. I wanted to cut of the edges…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
2
Rating
0
P
PrintablesMechLink

Lifeboat SOA

Lifeboat for the Delphinus airship from the Skies of Arcadia game. The steering wheel would have been to small to print at this scale so I just attached it to the main hull so its at least there. You will need to glue on the fins and the…

Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
3
Rating
0
P
Printablesayjay

Box (pen holder) for EggBot, EggDuino, SphereBot

This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the long small side (see photo, holes open on top) with only…

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
2
Rating
0

Hebocon Racer

A crappy wind-up car that runs on a spring motor.

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
2
Rating
0
P
Printableswinqooq

Additional external battery from internal for Segway Ninebot ES1/ES2/ES4

Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
5
Rating
0
P
PrintablesFuntomaas

Handle of a fridgebox - Griff eines Tiefkühlfachs

This was my very first designed part with freecad and my first 3d-print too. For this handle I used white PETG, 25% infill. I printed it on my Prusa Mini and it really works. :)

Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
1
Rating
0
P
PrintablesJorreto

Soporte AiLens para Cutebot pro

Es un soporte para la cámara Ai Lens de Elecfreaks. Se sujeta sobre el sensor de ultrasonidos del cutebot pro. Se le han añadido un par de orificios para tornillos, pero no es necesario, se sujeta bien. De esta forma se puede llevar el…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
2
Rating
0
P
PrintablesOldCoder

Battery Heat Switch mount for BattleBorn Batteries

Plastic mount for the switch supplied with heated BattleBorn lithium RV batteries to enable thermostatically controlled battery internal heaters. I used heavy duty double sided tape to secure it to a battery. I printed it with PETG, 0.20…

Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
0
Rating
0
P
PrintablesRPK

NeedleFileBox 10 Pcs 140mm, easylift

EN : Some time ago I was looking for a box for my needle files and found a nice model from Clivebradshaw and remixed it with an label in 4 languages , see:…

Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
4
Rating
0
P
Printablesayjay

Box (small) for EggBot, EggDuino, SphereBot

This is a small modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. I printed it on the big flat side and added suppot on the T-parts. More modular boxes…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P
Printablesayjay

Box (big) for EggBot, EggDuino, SphereBot

This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the big flat side with only suppot added on the T-parts. More…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P
PrintablesJ Fromel

This is The Way: Protector of the Nextruder LoveBoard

Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P
Printablesschim hansen

Print approx. €9.49–€11.60 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
4
Rating
0

Straw-frame Hebocon Car

A torque-geared spring-driven toy car with a frame made of straws.

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
3
Rating
0
P
PrintablesOstseefoto

Gebotsschild

Ich habe einfach nach einem Schild gesucht, was ich auf meine Box in der Werkstatt verwenden konnte. Aufkleber hielten auf dem Holz nicht lange, Blechschilder waren mir zu groß, also habe ich es selbst erstellt. Ein bisschen Photoshop und…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
Printablesabberans

PieBowl FAST <1h

The Pie Bowl is a sleek and functional 3D printable design inspired by the "pie crust" edges of an aluminum pie container. This subtle nostalgic touch is paired with a clean, modern look, making it both stylish and practical. Designed for…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesMartin

Noteboard

Magnetic Noteboard Magnets are printed as inserts in the component. Designed for Magnets Ø8 mm and thickness smaller than 2 mm. Print stop is implemented as a filament change in the gcode. Simply mount the magnets and then continue…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
3
Rating
0
P
PrintablesTri Nguyen

Wall hanger for whiteboard

Once printed, insert the hook inside the metal slot on the back of the whiteboard (2 hangers used minimum is recommended), and twist to lock it in place. You may use a self-adhesive Command double-sided strips to secure the back to the…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
4
Rating
0
P
PrintablesMastakko

Go Skateboarding Sign

I have aways wanted to make a replica sign of the NO SKATEBOARDING signs in my area but with a positive message to get out and skate. I simply copied what was in place and removed the big red cross-out for an encircled skateboarder icon.…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
PrintablesL Hannibal

Punktezähler - Scoreboard

This board allows you to count points from 0 to 999, forewards or backwards- Can be used for games like darts, Phase10, Wizard etc. or just as a simple machine for adding numbers. The board is assembled from 6 parts, no glue needed. The…

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
5
Rating
0
P

MK4 MMU3 Loveboard Cover

This is a loveboard cover for the Prusa MK4. I have a MMU and realized that everything else has a lot of color, and the printhead needed a little more! I didn't add much to the model, only the text and the coloring - it requires no…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
Printablesdavet

Titebond Bottle Cap Lift

This simple cap lift add-on to your Titebond wood glue container greatly eases the effort to open the bottle top. I had seen a picture with something similar but did not find anything on a few of the printer model web sites, so I made…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
4
Rating
0
P
PrintablesPeter Farell

GameBoy Mug

Gameboy Mug.

Print approx. €6.92–€8.46 excl. taxPreliminary estimate for one variant

Likes
2
Rating
0
P
PrintablesVirus4711

Tablet and Notebook Stand

Updates: (04.12.2022) Added versions for the screw and nut with more tolerance. Tablet and Notebook Stand Looking for something to spice up your home office? This laptopstand will become your new holding assistant. It supports lightweight…

Downloads
16,954
Likes
7,883
Rating
4.6
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ - SideBoxes for some Tools

A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…

Downloads
12,802
Likes
1,964
Rating
4.91
P
PrintablesUniversalMaker

Ultimate Spongebob Fish Tank / Bath tub Decoration Set (Swim through!)

A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…

Downloads
7,118
Likes
2,082
Rating
4.96
P
PrintablesAllpa

Shelf for Tonie figures / Regal für Tonie Figuren (Toniebox)

Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…

Downloads
6,773
Likes
1,120
Rating
4.74
P
Printablesap.engineering

Adjustable Notebook/Laptop Stand - Foldable / Print-in-Place

This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…

Downloads
5,350
Likes
418
Rating
4.53
P
PrintablesCypherA7

Doodlebob Pen/Pencil Holder

I've remixed this Doodlebob Pen/Pencil Holder from https://www.thingiverse.com/thing:4151595. With the previous iteration, the eyes, nose, and tie were solid which meant if you wanted it to look screen accurate you would have had to draw…

Downloads
5,256
Likes
736
Rating
4.91

Aztec Pattern Debossed Planter Pot, with Drainage Holes, Drip Tray

This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…

Downloads
4,847
Likes
1,363
Rating
4.95
P
PrintablesMarc Herter

FDM printer benchmark by Notebookcheck

This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…

Downloads
4,772
Likes
860
Rating
4.92
P
Printablesst3amboat

Print in Place Finger Skateboard With Moveable Wheels (Tech Deck)

Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…

Downloads
4,170
Likes
383
Rating
4.67
P
PrintablesRCFD

Notebook laptop stand

A laptop stand for thinner notebooks. The v2 has a bit thicker bottom brace for thicker laptops. Category: 3D Printing

Downloads
3,810
Likes
212
Rating
5
P
PrintablesModzTech

My Infinite Notebook (NEW A6 VERSION)

This is my take on the Infinite Notebook concept originally popularized by Gazzaladra . While inspired by the same idea, this is an original model that I personally designed from scratch , featuring its own structure and assembly system.…

Downloads
3,379
Likes
1,312
Rating
5
P
PrintablesCipis

Spongebob (multi-material)

Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3033103

Downloads
3,362
Likes
364
Rating
4.88
P
PrintablesShaderCraft

PokeBox Pokeball

PokeBox v2.0 + new Ultra Ball! Update: Robust and glue free hinge! New Ultra Ball version! Hi everyone! This model is my introduction to making mechanisms in 3D printing. Feel free to give feedback on ways to improve in both the building…

Downloads
3,086
Likes
1,261
Rating
5
P
PrintablesJezzaWalker

Fred the Fish (SpongeBob SquarePants)

I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.

Downloads
2,960
Likes
923
Rating
4.88
P
PrintablesVoxel3D_NL

PRUSA CORE one - COREBOXX

After the success of my enXLosure for Prusa XL, I am excited to announce my latest Project; COREBOXX → The Filament Storage System for Prusa CORE one! COREBOXX is an all-in-one platform for neatly storing, organising, and managing…

Downloads
2,956
Likes
1,354
Rating
5
P
PrintablesCotton

Fortnite Reboot Card

It's the Fortnite reboot card. Recommended 75% print size. Infill as little or as much as you want.

Downloads
2,907
Likes
213
Rating
5
P
PrintablesRACBOTS

Llavero Pokebola Pokemon - pokemon pokeball keychain

Mini llavero de pokebola clásica de la gran serie de Pokemon. Tamaño: 25mm de diámetro.

Downloads
2,857
Likes
390
Rating
5

Patrick Star (SpongeBob) Bottle opener

I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining

Downloads
2,643
Likes
228
Rating
5