Search results: edger

Sort order

150 models

P
PrintablesAinon3Dtisk

Cyberpunk Edgerunners Keychain

Hello, Welcome to my profile, full of models and miniatures :-) I have a Cyberpunk Edgerunnes keychain for you, inspired by the series of the same name. The logo is fully authentic. I used Bambulab PLA Basic as the material. It prints…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
252
Likes
30
Rating
5
P
PrintablesCalebTimoteo

Joker Heath Ledger (Scanned) Sitting - Dark Knight Figures

Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports,…

Print approx. €15.95–€19.50 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
19
Rating
0
P
PrintablesBuřina 3D

Joker (Heath Ledger)

I have released a completely remastered and improved version of this model with much better details! You can find the new version here: Joker (Heath Ledger) – Bust This highly detailed digital model captures the iconic Joker as portrayed…

Downloads
1,837
Likes
303
Rating
5
P
PrintablesElvis
Downloads
1,120
Likes
108
Rating
5
P
PrintablesMac747

Cyberpunk Edgerunners David Martinez Crew Logo

Hey chooms! What’s going on? Everything Nova? I heard you´re David´s fan. If you wanna join Maine´s crew you should definitely print this preem logo, unlike that gonk, newbie from Wakako…ehh. Anyway here, have a drink! See you around then…

Downloads
1,021
Likes
111
Rating
5
P
PrintablesReProps

Sandevistan From Cyberpunk Edgerunners

My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…

Downloads
897
Likes
135
Rating
5
P
Printablesfederico_zen

Cyberpunk Edgerunners Keychain

A simple cyberpunk edgerunner keychain

Downloads
419
Likes
82
Rating
0
P
PrintablesReProps

Kiwi's Mask from Cyberpunk Edgerunners

Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head. Be sure to post a make and…

Downloads
418
Likes
79
Rating
4
P
PrintablesŁukasz Pawlak

Wall Decor LUCY Cyberpunk Edgerunners

Size: 25 cm in height and 16 cm in width - Max size on MK4 Printed in 0.10 mm It can be difficult to print because some of the elements are thin. I recommend good quality filament

Downloads
404
Likes
79
Rating
5
P
PrintablesWillie

Sandevistan Cyberpunk Edgerunners

3d model I made of the Sandevistan from Edgerunners for my David Martinez cosplay at this year's Halloween party. The design was based off one particular frame, it's not exactly prop quality, but I couldn't find any free models online, so…

Downloads
371
Likes
113
Rating
5
P
PrintablesJungleG1337

Ledger Nano S Case

I remixed Whity Case to fit the Ledger Nano S. This will fit the foam insert, cables and documentation that come with the device. You will need a 30mm m3 screws for the latches and hinges.

Downloads
332
Likes
62
Rating
4.89
P
PrintablesMorcegolas

Ledger Nano-X case Knurled

Model based on the following object: https://www.thingiverse.com/thing:4445926 Changes made: Cap extended to the same width as the main body. Added loop hole in the cap. Added interior body to better accommodate the device. Share your…

Downloads
330
Likes
48
Rating
4.5
P
PrintablesMacsonCAD

Cyberpunk Edgerunners - Rebecca Headband Elements

Preamble Applications to Rebeccas Headband from the series “Cyberpunk Edgerunners” i made per the suggestion of a friend. I didn't add a headband or any type of fixture, cause headbands can vary depending on the cosplayer (to each their…

Downloads
328
Likes
27
Rating
5
P
Printablessear1pico

Ledger Nano S Plus Case

Case for the Ledger Nano S Plus, based off of cases I found for the X and S. I couldn't find something similar for the S Plus so I built this one for it. Note the threads are really tight initially. Have to screw the cap on and off a few…

Downloads
327
Likes
25
Rating
4.57
P
PrintablesVojTech3Dprints

LUCY EDGERUNNERS

Lucy Edgerunners 1:7 scale (cca 25cm). Needed: 4pcs 5x2mm magnets glue Primer spray paint Acryl colors- color pallete for mixing colors is downloadable in files Brushes transparent spray paint sand paper 220 Figure has 3 pieces and stand…

Downloads
316
Likes
59
Rating
5
P
PrintablesJonatan

19" rack mount for EdgeRouter X SFP

This is a very simple rack mount for Ubiquiti EdgeRouter X SFP as well as its power brick. I did not want to deal with too much tolerances so I designed it around cable ties, which is functional but a bit crude. You will also need two M5…

Downloads
306
Likes
34
Rating
5
P
PrintablesSherlock_Ohms

Paint Edger with Bearings

Tired of the cheap Paint Edgers at the big box stores, this one uses 608 bearings (skateboard bearings) and 2 M3x5 screws to create a very ridged structure and therefore, a very clean line. Fits the Shur-Line Edger Refills. Holes are…

Downloads
301
Likes
37
Rating
0
P
PrintablesReProps

Rebecca's Shotgun From Cyberpunk Edgerunners

My version of the Rebecca's Shotgun From Cyberpunk Edgerunners. this is a combination of the gun from the game with the simplified details of the anime version. As always sanding or glue may be necessary for good tolerances. Be sure to…

Downloads
291
Likes
56
Rating
0
P
PrintablesKiolia

CPAP Compressor Accessories: Mini Bladeless Fan, Annular Nozzle, Edger, Venturi Vacuum

Fun accessories for my regenerative compressor design! All fit a standard 22mm CPAP hose end. Only the venturi vacuum needs supports. Demonstration video:

Downloads
252
Likes
43
Rating
0

Ubiquiti Edgerouter X Rackmount

I recently purchased a new Ubiquiti Edgerouter for my home network, and couldn't find a rack mounting solution. This is what I came up with to solve the problem. v0.1 my first attempt needed some filing to fit the front plate of the…

Downloads
248
Likes
24
Rating
5

Heath Ledger's Joker

These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…

Downloads
237
Likes
49
Rating
5
P
Printablesw3rN42

Cyberpunk Edgerunners Lithophane Cylinder

"Cyberpunk Edgerunners" lithophane cylinder for bedside lamp. David an Lucy on the moon Inner diameter is 100mm, outer diameter 108mm, hight is 210mm. The adapter ring is only needed, when mounting the cylinder on a night lamp like mine.…

Downloads
229
Likes
63
Rating
5

Cyberpunk: Edgerunners: Lucy

Cyberpunk: Edgerunners: Lucy

Downloads
216
Likes
30
Rating
5
P
PrintablesDlux Brand

Cyberpunk Edgerunner Logo Keychain

You can print both sides (one front and one back) then glue them together to have the logo facing both sides. Changing colors from yellow to green is also pretty sick.

Downloads
216
Likes
52
Rating
0
P
PrintablesAce3DPrints

EGO Edger & String Wall Mount Holder

This is a wall mount holder for Ego Edger, Stringer. 0.28mm layer height 3 wall 20% + infill no brim print without support Print on PETG is recommanded for strength

Downloads
213
Likes
33
Rating
0
P
Printablesjwb1887

EdgeRouter 4 Rack Mount

This is a 19" server mount for a Ubiquiti EdgeRouter 4. I used 8 M3*8 screws to mount the router to the mount. Use default Bambu Studio settings, if not, below were my settings. No supports, 2 wall loops, 15% infill, .2mm layer height.

Downloads
193
Likes
16
Rating
0
P
PrintablesMoshe

Ubiquiti Edgerouter X 10" Rack Mount

Simple 10" rack mount for the edgerouter x.

Downloads
185
Likes
14
Rating
5
P
PrintablesHarry86

Ledger Nano S Plus Vault

Eine Schutzhülle für den Ledger Nano S Plus A protective case for the Ledger Nano S Plus

Downloads
184
Likes
20
Rating
5
P
PrintablesVincentDB

Ledger Nano S container

A simple yet efficient model to safely store your Ledger Nano S. Making effective use of its size to store a Ledger Nano S.

Downloads
171
Likes
24
Rating
3
P
Printablesno-brake

Ubiquiti EdgeRouter 4 (ER-4) 10 inch rack mount

Rack mount for 10 inch server racks I created for the EdgeRouter 4. You can use screws to secure the EdgeRouter to the rack mount, but be careful to not use screws that are too long! Otherwise, you can damage the EdgeRouters circuit…

Downloads
168
Likes
13
Rating
0
P
Printablesmisterentity

Ledger Nano X Container

Container for a Ledger Nano X Use a o-ring : https://www.mcmaster.com/1302N59/

Downloads
151
Likes
17
Rating
5
P
PrintablesYeet

Ledger Nano X Case

Printed case for Ledger Nano X hardware wallet Four M3X18 bolts are needed. Lock pin works better if printed in PETG for better flex. Lock pin is then glued into the top part of the box. There are two versions of "insert_lid". One has…

Downloads
150
Likes
25
Rating
4.75
P
PrintablesByzantine

BYZANTINE holder - Ledger Nano S plus

Form: Ledger Nano S plus Material: PLA / ABS More informations: https://byzantine-vault.com/en/ BYZANTINE Vault is a reinforced case which allows to store, protect and transport electronic devices that contain your sensitive personal…

Downloads
149
Likes
13
Rating
0
P
PrintablesKeith

Manscaped / Beatslm Beard Hedger guard

This is a replacement guard for the Manscaped Beard Hedger. It also fits the "Beatslm" knock off shaver which you can find from various sellers. It took a lot of iterations to get the dimensions just right, so I hope I save someone a…

Downloads
143
Likes
7
Rating
0
P
Printablesselfish

Hedgerow

My friends and I picked up Zombicide Green Horde and decided to print out own bushes. I stretched the height on the source file to make it match the dimensions of the ZGH bushes on Kickstarter. These were a really slow print for me, even…

Downloads
137
Likes
14
Rating
0
P
PrintablesErer2001

Ledger Nano S Case Water Resistant

Variants: USB Drive case https://www.thingiverse.com/thing:4893795 Micro SD cards case https://www.thingiverse.com/thing:4894171 Water resistant case for Ledger Nano S. Print slowly with many shells and optionally add a bit of PTFE on the…

Downloads
128
Likes
20
Rating
5
P
Printablesweberyap

Concrete Hand Edger

I want to use dry concrete to make a step, and I need a Concrete Hand Edger. For my application, first, I don't need to use too much force, and second, I don't need to be very durable, so why not print one yourself? If you are not using…

Downloads
128
Likes
20
Rating
5
P
Printablesromankozak

Insert for Ledger Nano S Plus case

The original case used the foam insert from the Ledger Nano S package. New Ledger version - Nano S Plus - doesn't come with the insert, so I made one that fits this great case. Settings for best results: TPU 1 perimeter 10% gyroid infill…

Downloads
124
Likes
24
Rating
5
P
PrintablesWeaponsmith

Crypto, Ledger Nano water proof case, EDC, storage container for hardware wallet

This is the EDC metal container. It has a nice rubber gasket to keep it water tight, and the price is quite reasonable ($6.50 ea at the time I'm writing this summary): https://amzn.to/3Yl8ROo All that's left is to print my stl so your…

Downloads
118
Likes
29
Rating
0

Cyberpunk: Edgerunners: David

Cyberpunk: Edgerunners: David

Downloads
116
Likes
17
Rating
0
P
PrintablesTigerTone

Zombicide Green Horde Hedgerows (Full 1 Piece set - ONLY for buildplates bigger than 250mm)

This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger…

Downloads
115
Likes
8
Rating
0

19" Rackmount for Edgerouter X - Remix

Modified version of Jonatan's great Rackmount for the EdgeRouter X SFP to fit the EdgeRouter X. I added some parametric features to make the opening for the EdgeRouter whatever width you want. The ERX works well with 111 mm width The ERX…

Downloads
112
Likes
12
Rating
0

Cyberpunk-Edgerunners: Rebecca

Cyberpunk-Edgerunners: Rebecca

Downloads
111
Likes
16
Rating
5
P
Printablessd1972

Threaded paint edger

I added threads to mount the edger on a painter's pole. It allows me to edge around the top of the wall.

Downloads
110
Likes
14
Rating
0
P
PrintablesKiwibloke

Wall mount bracket for Unifi EdgeRouter-X.

A simple bracket to allow you to wall mount a Unifi EdgeRouter-X while keeping access to the ports clear from obstructions. Print two and mount the ER-X such that the ports exit the bottom of the device. Note: One pair of rubber feet will…

Downloads
109
Likes
13
Rating
5
P
PrintablesDiggadoteth

SD-Card / USB-Stick / microSD / Ledger Nano X desktop organizer (on and under table)

This is my first ever published model and I only did it because I couldn't find any desktop organizer that also has space for a Ledger Nano X or two. This compact organizer (111x30 mm) will hold 5 SD cards, 4 USB sticks, 4 microSD cards…

Downloads
100
Likes
13
Rating
0
P
PrintablesRobinn03

Gridfinity Ledger Nano X & S stand

A fun way to display your crypto keys! No supports needed and is easy to print. This will work for both the Ledger Nano X and S.

Downloads
97
Likes
26
Rating
0
P
PrintablesGreg Kodysz

Edgerunner deckbox for cyberpunk tcg

works best for cyberpunk tcg 40ish card deck box fits sleeves. This is printed with a snapmaker u1 at .16 layer height. NOTE: This was printed with a multi head printer ones with a single head printer might use a ton of filament with all…

Downloads
95
Likes
8
Rating
0
P
PrintablesMixmeister

Unifi EdgeRouter ER-4 19 - Inch Rackmount

This is a remix of this Unifi EdgeRouter ER-4, Gave it a better looking front panel + New polygon on the sides, The mount connector is adapted mount from @Mauker. You will need 6x M5 screws 6x M5 hex nuts There are 2 models Unifi…

Downloads
93
Likes
9
Rating
0
P
PrintablesTigerTone

Zombicide Green Horde Hedgerows (Full 1 or 2 Piece set - For buildplates 200mm-250mm)

This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is a set that have been designed for smaller build plates.…

Downloads
92
Likes
8
Rating
0
P
PrintablesAlex

Edgerouter X 10" Rack Mount

You need to insert the ER-X from the backside. A small lip on the front plate will hold the device and prevent it from slipping through the front plate. I used two small M4x10 button head screws to secure the device. You do not need to…

Downloads
92
Likes
8
Rating
0
P
PrintablesROBO1331

Cyberpunk Edgerunners Keychain

Cyberpunk Edgerunners keychain logo keychain No supports needed

Downloads
86
Likes
6
Rating
0
P
PrintablesCalebTimoteo

Joker Heath Ledger (Scanned) Bust - Dark Knight Figures

Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 3D scanned version Low-poly model added Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…

Downloads
85
Likes
21
Rating
0
P
Printablessectoidman

Ledger Nano S case

My old ledger nano s developed a crack on one corner, near the screen, so I decided to make a printable replacement. I've tested it with the OEM parts (other than a replacement screen) and it functions normally. Some sanding may be needed…

Downloads
85
Likes
9
Rating
0
P
PrintablesOleksandr

Monoblock Dactyl Manuform Edgerunners Edition

Another variation of the tented Dactyl Manuform keyboard

Downloads
85
Likes
23
Rating
0
P
PrintablesTony

Gridfinity Ledger Nano X Holder 1x2x3

A simple gridfinity holder for your Ledger Nano X 10-15% infill .20 layer height Recommended magnets: https://amzn.to/48RlExG

Downloads
84
Likes
13
Rating
5
P
PrintablesAndersson

Cyberpunk 2077 / Edgerunners 3D Sign, Large Split Model

A Cyberpunk 2077 / Edgerunners 3D sign for chooms with expensive taste and questionable life expectancy. I designed this model mainly for printing on a single-color printer without AMS, using a print bed of about 21 × 21 cm / 8.3 × 8.3…

Downloads
81
Likes
20
Rating
0
P
Printablesmisterentity

Ledger Nano S Container

A container for Ledger Nano S Container User a o-ring: Oil-Resistant Buna-N O-Ring, 3.5 mm Wide, 25.2 mm ID | McMaster-Carr

Downloads
79
Likes
14
Rating
0
P
PrintablesThiago K.

Ledger Nano-X case

Case for ledger nano-x inspired by pooley92 in this reddit post https://www.reddit.com/r/ledgerwallet/comments/h13jup/designed_and_3d_printed_a_case_for_my_ledger_nanox/?ref=share&ref_source=link Category: Containers

Downloads
78
Likes
5
Rating
0
P
PrintablesPaleHammer

Xbox Elite Skadis Controller Mount - Cyberpunk Edgerunners & Skyrim

Fast Is What You Do Best, Ain't It? This should work with or without the paddles on the controller. I used PLA for the controller stand (pretty) and PETG for the T-clip (tough) and printed without supports. Please check out the original…

Downloads
76
Likes
13
Rating
5
P
PrintablesST4LK3R

Edgerunners Fan Cover – 120mm

This is a custom fan grill inspired by the Edgerunners logo from Cyberpunk 2077: Edgerunners. A perfect addition to a PC case mod, cyberpunk-themed build, or just as a decorative piece. The design reflects a raw, industrial aesthetic with…

Downloads
67
Likes
5
Rating
0
P
PrintablesDonSwanson

Ubiquiti Edgerouter X Stand

This is a desktop stand for the Ubiquiti Edgerouter X. Print it laying down for best results. _____________________________________________________________ If you enjoy the models we have made and shared with the community, we encourage…

Downloads
67
Likes
6
Rating
0
P
PrintablesInkarium

Box For Ledger Nano X

I wanted a small box for my Ledger Nano X but not finding one, so I created mine. I hope you find it useful. NOTE The cover is not very easy to open, it is normal I did not want it to be easily released. CHANGES 06/11//2020 Add logo in…

Downloads
67
Likes
4
Rating
0
P
PrintablesAilen Phoenix

Ledger box

I thought of making something like the red box in tomorrow never dies. But for a ledger wallet and in my own style ofcourse its not ultimate for portability. Its main use is organizing while the ledger is stored in a safe. if you use the…

Downloads
67
Likes
15
Rating
5
P
PrintablesYeet

Ledger Nano S Case

Printed case for Ledger Nano S hardware wallet Four M3X18 bolts are needed. Lock pin works better if printed in PETG for better flex. Lock pin is then glued into the top part of the box. There is multiple parts in lid_multipart.stl. If…

Downloads
65
Likes
13
Rating
0
P
PrintablesTisza

Mount for Ledger Nano X

This mount can be used under a desk for a concealed, yet accessible, storage solution for the Ledger Nano X. It might be a little tight the first few times inserting and removing the Ledger Nano X from the mount. This should become easier…

Downloads
62
Likes
8
Rating
0
P
PrintablesR7Makers

The R7Makers Ledger | Modular Book Tracker & Mechanical Counter

The R7Makers Ledger | Modular Book Tracker & Mechanical Counter The "How & Why" Behind the Design I’ll be honest: I initially tried to print this as one solid piece, but the print time was way too long and a single failure was costing me…

Downloads
61
Likes
24
Rating
0
P
PrintablesLinus13000

Ledger Storage Case

It is a small storage compartiment for your Ledger device. The Cap with the hole is made for the nano X. The cap without the hole is made for the nano S. Because the nano X is bigger than the nano S, the nano S slides a bit in the case.…

Downloads
60
Likes
5
Rating
0

The Joker(Heath Ledger) Hueforge

.2mm layer height. Printed with rectilinear sparse infill and Hilbert curve top surface(I have found other top surface patterns are too shiny for my liking) I use brims on all my Hueforge prints and rarely have any adhesion issues. Swap…

Downloads
58
Likes
16
Rating
0
P
Printablestobermori

EdgeRouter X Tray for Modular 19" Rack

Print face down, no supports needed Note you will not be able to see the router ACT lights once installed You will need to remove the rubber feet from the edgerouter (it will fit with them o, just, but it puts a lot of strain on the…

Downloads
57
Likes
8
Rating
0
P
Printablescm0x4d

EdgeRouter SFP DIN Rail Mount

DIN Rail mount case for Ubiquity EdgeRouter SFP

Downloads
57
Likes
7
Rating
0
P
PrintablesKerrek

Ledger Nano X case with Airtag

The only support needed is on cap 1 on the flat section surrounding the threads. Print with threads down on cap 1 only.

Downloads
53
Likes
9
Rating
0
P
PrintablesErrrbody

MetalManiak/ MASC crescent eave seam edger 1" and 1.5" mechanical lock standing seam roofing jigs

the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest. 1"…

Downloads
52
Likes
1
Rating
0
P
PrintablesMre

Secret Crypto Shelf for ledger nano S

simple print in any filament you like and slide the cover over the top.

Downloads
47
Likes
15
Rating
0
P
PrintablesMonsieur-Pierre

David Martinez from Cyberpunk: Edgerunners Figure

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D figure inspired by David Martinez from…

Downloads
45
Likes
6
Rating
0
P
PrintablesTom B

TPU weed eater, weed wacker, edger lawn tool blade

I made a TPU weed eater blade because I hated the OEM one. I think it is better in TPU because it doesn't shatter or break off as much. I hope you enjoy it!

Downloads
44
Likes
8
Rating
0
P
PrintablesMrNeedlemouse

Ubiquiti EdgeRouter X Cover

Designed to make it blend in better on my white wall. For the Edgerouter X non-SFP model. Press-fit. For use with PoE! No hole for PSU connector included.

Downloads
44
Likes
5
Rating
0
P
Printablesgerard artigas

Inserto Ledger nano S Plus

El inserto original para PLA y materiales duros, Remix de "romankozak"

Downloads
43
Likes
4
Rating
0
P
PrintablesRyan Donoghue

Cyberpunk Edgerunners Lithophane Cylinder Spotlight Remix

My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…

Downloads
41
Likes
11
Rating
0
P
Printablesdarkhemd

Ledger Nano X Case

Both models are in the correct printing orientation, and are printable without support.

Downloads
41
Likes
7
Rating
0
P
PrintablesAdroit Jones

Trimmer/Edger Cap for Black and Decker ST4500 Easy Print

Can't get a replacement cap for a Black and Decker string trimmer/edger, so I modeled my own. Fits great and printed in PETG, should last a long time. Easy print with minimal supports. Will probably fit many more models, but designed for…

Downloads
38
Likes
5
Rating
0
P
PrintablesColbmista
Downloads
38
Likes
6
Rating
0
P
Printablesmariospinaci

Ikea Skadis - Ubiquiti EdgeRouter X SFP stand

Support to be able to hang Ubiquiti EdgeRouter X SFP stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.

Downloads
36
Likes
3
Rating
0
P
PrintablesTisza

Mount for Ledger Nano S

This mount can be used under a desk for a concealed, yet accessible, storage solution for the Ledger Nano S. It might be a little tight the first few times inserting and removing the Ledger Nano S from the mount. This should become easier…

Downloads
35
Likes
3
Rating
0
P
Printablesjericho

Ubiquiti EdgeRouter 4 vertical stand

wanted a way to stand the ER-4 on it's side, so I made this stand. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Category: Computer

Downloads
32
Likes
0
Rating
0
P
Printables2bedom

Ledger Flex - magnetic flip case

This case is for the Ledger Flex hardware wallet. I decided to build a Version with a magnetic lid. You need: 2 x M2x25mm (i sanded down the lower 20mm of the thread a bit and glued the top 10 mm with super glue) - 2-3 x 3x1mm neodym…

Downloads
30
Likes
3
Rating
0
P
PrintablesIvan Lipcan

Milwaukee Quik LOK - Trimmer and Edger

I have made a simple wall mount for Milwaukee QUIK-LOK power head, Edger and Trimmer. You have to mount the Tops first and then align the bottoms before screwing them into your preferred walls. I have placed a small slit in the models so,…

Downloads
30
Likes
5
Rating
0
P
PrintablesNathanC

Manscaped Beard Hedger/Trimmer Travel Lock

Unlike Manscaped's other shavers their bead trimmer uses a sliding on/off switch with no travel lock. This design wedges around the power switch to prevent it from moving. Being a friction fit, you may need to scale up/down the model or…

Downloads
26
Likes
11
Rating
0
P
PrintablesChespi

Ledger Nano S Plus Case. Loose fit

After finding out too late myself that the original model is too tight, Ive made this remx that scales 1.03 the original

Downloads
26
Likes
2
Rating
0
P
PrintablesDon3Sch

EGO Trimmer to Edger Kit

Convert EGO Trimmer into an Edger May work with other trimmers with a 25 mm pole. Designed to use with this caster from home depot: Sku#: 03900349813 Props to Jim Nan: Thingiverse user: http://www.thingiverse.com/CustodialArtist/about for…

Downloads
26
Likes
7
Rating
0
P
PrintablesPaintX

Aleph Zero Ledger Nano S Plus Case Knurled

Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi, gaming, and enterprise. Learn more: https://alephzero.org/

Downloads
25
Likes
3
Rating
0
P
PrintablesAdham Al Malla

Ledger Flex Case with Airtag

Ledger Flex Case with Airtag hidden for parametric box

Downloads
25
Likes
2
Rating
0
P
Printablesflyingtoaster0

Hard case for Ledger seed phrase recovery sheet

This is a hard case for the recovery phrase paper that comes with Ledger devices. The two pieces sandwich together to keep the sheet from coming out. Things you'll need 4x M2.5x12 screws 4x M2.5 bolts Instructions Place the recovery…

Downloads
25
Likes
8
Rating
0
P
PrintablescruX

Ledger Nano X Box Insert

For Original Ledger Nano X Box

Downloads
24
Likes
2
Rating
0
P
Printables2H Designs

Wilkinson Sword "The Edger" Blade Protector

This is a Snap on Blade Protector for the Wilkinson Sword "The Edger" so that it doesnt damage your toilet bag. It is desgined so that you can snap it on. The fit is tight, no rattling. I printed it on an H2D in ABS with 0.2mm Layer height.

Downloads
24
Likes
4
Rating
0
P
PrintablesBarry Pointon

UISP EdgeRouter 10X Rack mount

UISP EdgeRouter 10X Rack mount

Downloads
24
Likes
1
Rating
0
P
PrintablesPaintX

Aleph Zero Ledger Nano-X case Knurled

Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi, gaming, and enterprise. Learn more: https://alephzero.org/

Downloads
23
Likes
3
Rating
0
P
Printables_slinky_

Ledger Nano S Top Remix

Increased the height by 7% to allow the threads to fit freely, also if you use a little silicone spray it works a treat

Downloads
23
Likes
3
Rating
0
P
PrintablesWarump

Ledger Nano S stand

A simple stand for a Ledger Nano S, made in F360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 30 Filament: Gembird PLA Transparent Category: Tool Holders & Boxes

Downloads
22
Likes
5
Rating
5