Tiskátko do keramiky/těsta - sedmikráska / ceramic/dough stamps - daisy
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
- Downloads
- 98
- Likes
- 20
- Rating
- 0
512 models
velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer
Redmi Smart Pen clip for Redmi Pad Pro, to place the pen in the protective cover. Printed piece and glued with double-sided tape.
This is the 3D printed PLA 4 perimeters, 20% infill, workholder we used with the nomad carbide milling vice. as seen in this video by yours truly:
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.
Žáci si na základě stanovených témat, promyslí a následně načrtnou potřebný doplněk, k ZZ. Dokumentace bude obsahovat měřítka, barvy, počet. Vytvoří model buď v Autocad Inventor nebo Tinkercard.
I recomend glue on Bed for Flex and PETG. It helps alot!
Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
inporved design for a phone case for xiaomi redmi note 11.
Overview These are printed parts for converting an Ender 3 into an electrical discharge (EDM) machine. There are four prints: EDM Cartridge Adapter Wire to Filament Clip X-Axis Cable Management Hub X-Axis Limit Switch Cover (Optional) EDM…
Xiaomi Redmi Note 12 case with differents models
Remix of case I found on thingiverse, remixed for Flex printing. Made in tinkercad. ADDED V3: -Bigger mic hole in the lower side of the phone. -More comfortable power button hole. Print instructions Supports recommended
Remix with "Opel Emblem" "Astra K Innovation" lettering and suitable for my REDMI NOTE 10 PRO including rubber case. Also add a file WITHOUT the "Astra K Innovation" lettering Print Settings: Supports: Yes Resolution: 0.2 - 0.3 Infill:…
Introducing the WT-01, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
This is the original Zack Freedman gridfinity baseplate design. I did NOT create this design, I am only reuploading it as I was unable to find it on Printables. All credit to the original owner.
CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
This print-in-place module uses a compliant mechanism to hold in a wago 221. This wago is used to connect a 1/16" brass rod to a EDM power supply. 6x2 mm Neodymium magnets keep the module attached to an EDM machine. EDM Is a low-force…
Because I couldn't find any stl file for a phonecase for this phone I disigned my own. It is not perfect but it works.
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
A Vat for EDM Want to convert your Ender 3 into an EDM machine? We did. This 3D printed vat design mounts to the bed-leveling bolts of an Ender 3. It can be filled with distilled water without leaking. Gridinity This design is gridfinity…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad These are inserts (and corresponding lid badges) to build a 100 round weatherproof ammo case out of Harbor Freight's…
Originally published here: Xiaomi Redmi Note 10 & 10S m2101k7 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
Originally published here: Xiaomi Redmi Note 9 Pro / S case by tato_713 - Thingiverse This case is for the Xiaomi Redmi Note 9S and 9 Pro, but not for the Redmi Note 9 (it's a bit wider). Some of the models are designed for rigid…
Redmi note 13 cover and camera bumper. Please read the text file before the customizing.
An archive of Zach Freedman's infinite storage solution. It's open source and he expects you to archive + modify + use it. So… have fun! If you like this don't forget to look for Zach's channel in youtube and smash that like button and…
Bottom is flat. Case is tested. Best printed slowly in TPU.
The 6.5mm Creedmoor is a centerfire rifle cartridge developed for Creedmoor Sports and introduced by Hornady in 2007. It was designed specifically for long-range target shooting. The cartridge is a modification of the 6.5 Carcano and the…
Stand Redmi Watch 5 with charger point
simple case for the Redmi Note 7 Print instructions recommended to print with PLA no supports
Fits the version of the phone with following measurements: 164.2 mm x 76.1 mm x 8.1 mm COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Bottom is flat. Case is tested. Best printed slowly in TPU.
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Mount storage right to your printer with the Gridfinity modular workshop storage system - whatever machine you use! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
Xiaomi Redmi 13C Phone Case: The case is slightly taller than the phone (+0.7 mm) and will also cover the height of the phone with protective glass (e.g. 0.4mm Gorilla glass, etc). Tolerances for model are 0.2 mm (offset from phone). The…
The original model suggests printing it in TPU. However, if you want to print it in PLA or PTEG, you should visit the original model where you can find a slightly different version that works better with those materials. For the V3…
Das ist eine Handyhülle für das Redmi Note 12. Am besten mit tpu drucken
Originally published here: Xiaomi Redmi Note 7 & 7 Pro m1901f7 case by tato_713 - Thingiverse This case was teste on the phone Xiaomi Redmi Note 7, it may be compatible (because its size) with the Xiaomi Redmi Note 7 Pro (model M1901F7S).…
Xiaomi Redmi Note 12 Pro 5G Case v1.0 Warning: the case does not fit tje Xiaomi Redmi 12 pro plus 5g!
Xiaomi Redmi 13 note pro camera cover
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
DE: Nachdem ich keinen passenden Standfuß für meine Xiaomi Watch 3 gefunden habe, entschloss ich mich meinen eigenen zu designen. Das Ladekabel einfach in die dafür vorgesehene Aussparung hineinlegen und den Stecker in den Ausschnitt auf…
We have designed this CAD model with the intent of providing users the freedom to modify it to suit their specific 3D printers or CNC machines. As a low-force process, EDM requires minimal force to hold the electrode in position. However,…
6.5mm Creedmoor, also known as 6.5 CM, 6.5 CRDMR, or 6.5 Creed, is a centerfire rifle cartridge designed in the United States of America by Hornady in 2007. Print this for props, display, education, training, just because it's cool, or…
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
Xiaomi Redmi Note 14 4G TPU Case
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
Bottom is flat. Case is tested. Best printed slowly in TPU.
A Xiaomi Redmi Watch 3 Active Stand, I chose an octagonal joint for the upper part so you have more “degrees of movement" when you want to change the angle while still keeping a good printability, it's support free so you only need a…
Introducing the WT-01 V1.1, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
CNC collet storage blocks for the Gridfinity modular workshop storage system - they're both ER11 for now. Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Just a charging stand for Redmi watch 4. I hope it will be useful to someone. I printed the docking station with petg filament, 0,4 nozzle and layer height 0,24 mm. Printed without supports.
Bottom is flat. Case is tested. Best printed slowly in TPU.
Phone case for the Redmi 10 2022. Print at .2 layer height. Revisions might be made in the future. *Version 3 fixes the misaligned ports and gives access to the power and volume buttons
redmi 10c case with card holder
Подставка под смартфон Redmi Note 7 со звуковым каналом для вывода звука на переднюю панель
Simple, flat, chonky TPU case. Feel free to customize. Suports needed. If using Bambu Studio just hit the support checkbox with "normal supports auto". Really recommend using dried filament. Be sure to leave it to dry for at least 4…
I modified in Fusion360 the cases obtained from a customizable phone case (see other ddesignes) so to obtain one that fits really well. I've made it think enough to protect the cameras. I've uploaded two versions, one "clean", one with an…
Scientifically accurate model of an edmontosaurus. The model features detailed scale/skin texturing along the model. I created three variants of the model, one standing and two posed. I recommend printing it at a finer layer height or…
Originally published here: Xiaomi Redmi Note 8 m1908c3j case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8, phone which model number starts with "m1908c3j", it will not work with Redmi Note 8 T or Redmi Note 8…
The model does not require supports
TPU filament is recommended Stiff filaments may damage the case during assembly. UPDATE: I created new better model. Better fit, now you can print with PETG. Tested - showed on photos. ( The holes don't look very good because it was a…
Nice christmas/winter themed model of a Canyon Speedmax cf timetrial bike. Perfect gift idea for that one special friend who's a huge bike nerd or triathlete! (or for yourself) No matter if you're the outdoor-cycling, or ZWIFT kind of…
Model of a Canyon Speedmax CFR with fast and fancy wheels. Perfect style element for every cycling enthusiasts home! Or perfect as a little gift! Designed to be printed flat with supports (let me know if you want a supportless version!)…
Can be printed in any tough material (PLA, PETG). Sand or melt the excess flange to ensure a perfect fit. V4 Update: All holes align pretty much perfectly!
English : A case for the Redmi A5, I recommend using TPU, but you can also use PLA or anything else with a plastic appearance. Français : Une coque pour le Redmi A5, je recommande d'utiliser du TPU, mais vous pouvez aussi utiliser du PLA…
6.5 Creedmoor stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
As you can understand from the name, this is just a boba fett helmet print case. The art was taken from here: https://www.thingiverse.com/thing:2458053
This mount uses Zipties to mount the camera to the bed. This creates beautiful timelapses! I've used M3 screws from the spare parts bag of my prusa (I used a long screw to attach the swivel so it doesn't break)
Bottom is flat. Case is tested. Best printed slowly in TPU.
I could only find 50 round ammo boxes available for 6.5 Grendel and wanted to keep them in batches of 100 for reloading and sorting purposes. I designed the model with a minimalist approach, so the 2 pieces print and snap together…no need…
es un diseño simple , de forma hexagonal, yo lo imprimí en FLEX-920, aunque también se puede en PLA. lo imprimí en una Artillery sidewinder x1. si tienes alguna duda o sugerencia, no olvides en decírmelo.
I bought this phone before checking it's size, and it's so large that using the masks on the market make it so larger that you can't fit it into a simple pocket. So I made a simple and thin mask, that doesn't add too much weight and size…
100ct Reloading tray for 6.5 Creedmoor or 308.
Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request on the design just ask me. For other phone cases…
Description The model allows to use the screw holes in the back of the Canyon Speedmax Seatpost SP0048 to attach a Garmin mount. Model Tests Model was tested with PETG. Screw holes are intentionally a tight fit. For the Garmin Adapter,…
- TPU Material - Flexfill 98A - Inside pocket for RFID card, the NFC function must be turned off in the settings - The case does not interfere with the cameras field of view - Painted supports - The Gcode is also for the Prusa MK3 printer
Redmi Note 15 Pro Protective Case
I printed this case with the camera protection separately because I didn't want to print it with a lot of support but you can choose how you want to do it. I took a soldering iron (didn't have good glue at this moment) for assembling them…
Note: Only one support is needed at the bottom where the power plug connects. I have no clue what that little cutout left of it is for, or if we really need it. It was there on the hull you receive when you buy one, so I did the same…^^"…
Context Maybe my ears have an unusual shape, maybe I'm asking too much: I was unable to run without having to reposition my earbuds every 5 minutes. Since tapping/pressing the earbud is sending a pause command, it was annoying. I decided…
I created this model after realizing that all of the existing covers for this phone have this problem with the volume buttons, as such i took inspiration from covers i saw on the internet and made this change to the volume buttons slit,…
This model was created by measuring the dimensions of the device, this helps the creator to make a case for the phone. I can make any phone model for request email me at [email protected] Please "Like", "Review" and “Comment” on the…
An EDM keychain demo for the Powercore V1 kit. This keychain can be machined out of 0.4 mm aluminum on a DIY EDM machine. The EDMWeb parameters are: Travel Z: 7 mm Start Z: 0 mm Cut Start Z: -4 mm Tool Diameter: 1.5 mm Travel Speed: 1000…
6mm Creedmoor Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) This is a 2 part 6mm Creedmoor Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a…
Protective Phone case for Xiamo Redmi Note 7. Printed with supports.
Hockey pucks of Edmonton Oilers logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
This is a case which I designed for my Xiaomi Redmi Note 8 Pro. It is intended for usage together with the silicon case which was provided together with the phone. Update: I have added a version with more holes at the backside, this makes…
The case is modelled to be printed with a flexible material, e.g. I used TPU. It might be too tight for PLA or other stiff materials and the buttons might not work. I prepared a few models with various wall thickness on the side and…
Xiaomi Redmi 14C mobile cover / protector I printed it in TPU. it is in 2 parts for easier printing and even possibility to print the ring in a harder material. (the photos are obviously taken with a different phone) Category: Other
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
Support: Yes (tree or organic) Infill: more than 10% Layer height: variable