67 models
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
Noctua design high efficiency fan grille for 140mm fans. Update : Modified corner radius to 8mm.
Noctua design high efficiency fan grille scaled down to 80mm. Added a pocket to compensate for using noctua NA-SAV2 Anti vibration mounts.
Noctua design fan grill sized for 92mm fans like the Noctua NF-A9
Scaled up to 200mm and appropriate mounting hole spacing used in 200mm fans (154x154, 110x180, 170x170 mm). also shaped the mounting tabs to match the layout of the NF-A20 instead of being square like a typical fan.
Made some remix,and modify a 14cm version
A 750mm Wing for rc gliders that can be printed in PETG, with spaces for a 10mm dowel as supporting spar, with connector in middle allowing for one 500mm dowel and 1 250mm dowel. This allows to buy 3 500mm dowles for both wings. Suitable…
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
Remixed Noctua High-Efficiency Fan Grill to fit 60mm Fans for Voron Trident and 2.4. I made this so I can have slightly quieter skirt fans.
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
140mm version of Noctua's fan grill
Printed using PETG with 100% infill and 0.20mm layer height. Anx256 created a great model for replacing the back of the AOOSTAR WTR Pro to allow for the use of a 140mm fan instead of the stock 120mm fan. This remix adds a 140mm version of…
This mod is an upgraded mainboard cover for the Qidi Plus 4, designed to optimize airflow and cooling with an 80mm fan. Its focused ducting system enhances heat dissipation efficiency, keeping internal components at optimal temperatures.…
Remix of two existing models, wanted something to cover the fan blades for my use case
This is a lightweight, efficient fan duct designed for the Anycubic Kobra S1 . By optimizing the airflow directly through the heatsink, it improves cooling efficiency, prevents heat creep, and helps eliminate frustrating filament clogging…
Added version for 60mm fan – I don't have a fan to test this with so please let me know if it all fits correctly Cover for the Meanwell LRS 350-24 (Present in some Ender 3's, all Ender 3 Pro's, V2's and Max's), mounts to the inside of the…
Well, my fan hub is ugly so I want to hide it. Plain and simple!
Parametric High-Efficiency Fan Grill (Remix) This is a fully parametric remix of the "High Efficiency Noctua 120mm Fan Grill." While the original design offers excellent airflow and low noise levels, I created this version to improve…
Jonsbo N6 Nas Case Front Fan Mount For 120x15 Fan 25 Percent Infill, ( Tested with 15 and it was still plenty strong ) Needed Parts 4 m3x12 Bolts 4 m3 Nuts 2 Magnets And Screws From Old Front Plate 2 120mm by 15mm Thick Fans 8 Course…
Noctua Design Fan Grill adapted for the NF-A15
This adds a grill to protect the fan, whilst keeping the air-flow very high.
Just a 92mm version of Noctua's original 120mm fan grill model.
A version of GridFinity with a focus on minimising plastic waste. This concept uses inserts for each grid line, allowing you to add or remove grid lines. This means you can have flat bottomed boxes, with a magnet only in each corner.…
Calling all Gardeners and there, fellow rainwater wranglers! Are you ready to dive headfirst into the grand adventure of DIY rainwater collection? Imagine yourself in your lush greenhouse, surrounded by a symphony of raindrops and the…
I use this CO2 diffusor since some years in my 120cm tank. The water outlet on the top connects directly to a Juwel Eccoflow 500 pump head. In my tank, the diffusor and pump is installed behind a edge mounted hamburger mat filter. Outlet…
Thanks to the author of the original model for the work done. I also want to make a small contribution and have created a more efficient grill model based on the High-efficiency Noctua 120mm fan grill . Now I think there will definitely…
Test bench for ITX motherboard and SFX power supply - remixed to reduce material use and print time
This is my take on a strap for face masks. The part is made by printing a set, and then connecting with any filament which will also set its width. This reduces the filament needed for a single print, and allows up to 18 sets on a…
Overview VOC Scrubber is a combined VOC and HEPA filter using activated carbon pallets to remove fumes and particles generated during 3D printing. Initially developed with the Voron 2.4 in mind, it should also fit Voron Tridents and other…
In the software world, efficiency comes in the form of saving the user clicks; In the physical product world, efficiency comes in the form of saving the user actions . When it comes to work, I strive to be as efficient as possible.…
Jonsbo N6 rear fan mount, the round holes in the oem mount where extremely noisy for me. This mount quiets it down to a bearable level.
This adds a grill to protect the fan, whilst keeping the air-flow very high.
This is a 40 mm fan grill using the Noctua High-Efficiency grill pattern. Any filament. Easy print. No screws needed.
Recommend printing with ASA or PA. I use ASA with a modified PLA Profile at 50 mm/s on a A1 Mini and the prints are strong and consistent.
Generatively designed Gridfinity Bin to create the most efficient Gridfinity Bin ever!
Grille for fan K1, may not fit K1C!
Noctua's high efficiency fan grill with a gopro mount to make mounting a 120mm fan to things easier.
A variation of AC-Infinity Thermoforge T3 Intake adapter improved efficiency which improves the efficiency.
Disclaimer This template will maintain full compatibility with Gridfinity ONLY IF you leave a few of the parameters at their default values (see the Customization and this section below for a full explanation). If you start to change any…
Introduction: The Quest for the "Holy Relic" of Filament Management If the name "Inomata Kagaku Dry Food Stocker 6.0" rings a bell, you are likely a comrade-in-arms in the nightly battle against filament moisture. In FDM 3D printing,…
This remix addresses some fit issues with the original model (see list of changes for details). Print as oriented; you shouldn't need supports. I advise attaching the bottom portion first, then the top. The clearance added is only 5mm, so…
This enclosure is designed specifically for the PWM fan control board . In addition, I have included an adapter for the temperature sensor , which fits onto the radiator valve for accurate temperature readings. The fans are mounted…
This is a remix of two models enabling 200mm Noctua fan installation to a 10inch rack with additional mesh filter spacer that separated mesh from fan blades.
Just a simple desk fan that is efficient and quiet. Great for every day cooling needs.. the air flow and power is great for plants indoors or green houses. takes a 24mmx26mm 5v dc motor. Compliant motor shaft hole provides reliable grip…
The walls are ribbed to avoid warping and increase overall stiffness while minimizing contact with the floppies. Print in PETG for best results.
I remixed the Sovol SV06 ACE Mainboard cover from @TheBear_3113750 and the High-efficiency fan-grill from @Noctua to one Model. Note: I remixed the Standard version of the Sovol Mainboard cover with M4 inserts. Original models:
Background Information The origonal fan gaurd was remixed to use the fan gaurd that is seen in Noctua's High-Efficiency fan grill. In theroy this should reduce the noise level of the extruder cooling fan by ~2dB(A). Printing Material: PLA…
A compact ducted fan built for real airflow, not just looks. Features a snap-fit housing, honeycomb grille, and optimized blade geometry for smooth, focused output. Requires only two screws for assembly—everything else presses together…
Background Information The origonal fan gaurd was remixed to use the fan gaurd that is seen in Noctua's High-Efficiency fan grill. In theroy this should reduce the noise level of the extruder cooling fan by ~2dB(A). Printing Material: ABS…
My 92mm remix of the High Efficiency Noctua grill. I made this version as a trimmed down section from Noctua grill which insn't simply shrunk down. Thus removing excess smaller struts. Cropped to fit the edges of a 92mm fan perfectly so…
What is the Whisktributor? The Whisktributor is a distribution tool meant to bridge the gap between auto and manual WDT tools by being a manual WDT that doesn't require skilled finicky movements that require high dexterity and focus to…
The project is not yet finished and some parts are missing including the source code of the control. The source code will be published on Github. Please be patient. The fan mount increases the efficency of convector heaters, thereby…
I just needed some Fangrills for my 180mm Fans on my Watercooling Radiator because i got two new Kittens. They are to exited about the spinning Fans and i dont want them to get hurt because of this. Only found some for 120mm and 140mm so…
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
Just a 92mm version of Noctua's original 120mm fan grill model.
Jonsbo N6 rear fan mount, the round holes in the oem mount where extremely noisy for me. This mount quiets it down to a bearable level.
A compact ducted fan built for real airflow, not just looks. Features a snap-fit housing, honeycomb grille, and optimized blade geometry for smooth, focused output. Requires only two screws for assembly—everything else presses together…
Parametric High-Efficiency Fan Grill (Remix) This is a fully parametric remix of the "High Efficiency Noctua 120mm Fan Grill." While the original design offers excellent airflow and low noise levels, I created this version to improve…
I remixed the Sovol SV06 ACE Mainboard cover from @TheBear_3113750 and the High-efficiency fan-grill from @Noctua to one Model. Note: I remixed the Standard version of the Sovol Mainboard cover with M4 inserts. Original models:
Overview VOC Scrubber is a combined VOC and HEPA filter using activated carbon pallets to remove fumes and particles generated during 3D printing. Initially developed with the Voron 2.4 in mind, it should also fit Voron Tridents and other…
This is a more robust Pixel Watch 2 & 3 charging stand. It prints on its side so that the layer lines are running up and down the model, massively increasing its strength. It also gives this model a cool, angular, and sort of industrial…
Professional Engineering meets DIY Workshops. This high-performance cyclone separator was designed using Siemens NX advanced surface modeling to ensure maximum airflow efficiency and particle separation. Whether you are using a vacuum…
1. Dedicated Design • Custom Fit: Unlike universal adapters, this system is modeled specifically to integrate with the router's under-table housing and the sliding fence. • Optimized Airflow: The internal geometry is designed to minimize…
Keep your workshop clean with this high-efficiency Cyclone Dust Collector! Specifically designed for 3D printing, this cyclone separator effectively removes dust and debris before it reaches your vacuum, extending its life and maintaining…
What is the Whisktributor? The Whisktributor is a distribution tool meant to bridge the gap between auto and manual WDT tools by being a manual WDT that doesn't require skilled finicky movements that require high dexterity and focus to…
