Overview/test of fillers / přehled/test výplní
17 fillers from PrusaSlicer 17 výplní z PrusaSliceru
- Downloads
- 73
- Likes
- 9
- Rating
- 5
126 models
17 fillers from PrusaSlicer 17 výplní z PrusaSliceru
Řezy válcem, kuželem a jehlanem.
krytka nohy na žehlící prkno, průměr nohy 22mm, úhel 45 st.
Model vznikl v rámci jednoho školního projektu. Logo se vytiskne na 3D tiskárně. Před nažehlováním překryjte logo pečícím papírem. Tričko raději perte ručně, aby jste si nepoškodili pračku možnými odlamujícími se kousky loga. The model…
Loving this model. My prints: Scales: 100%, 150%, 200%, and 300% scale prints in photos 0.2mm resolution 10% infill No supports (only 300% scale printed with supports but I doubt it was needed) Filaments: Amazon Basics Silk Blue PLA…
Diese Siebe ergänzen mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Sie dienen zum Sortieren der Mehlwürmer nach Größe. Mehrere Siebe können übereinander gestapelt werden und zusammen auf einen geschlossenen…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
This is a simple mount to attach an ESP32cam to my watermeter. The mount itself is a simple friction fit, the parts can be joined by gluing or using screws. I used threaded inserts to properly attach the screws. I provide all my models…
ACHTUNG enthält einen Fehler !!! ZIPPO Gürtelhalter SORRY da hat sich wohl bei mir ein Rechenfehler eingeschlichen. Wenn ich dafür ausreichend Zeit habe werde ich das mal korrigieren. Bis dahin könnt Ihr versuchen die zu lange Achse (nur…
This is a model of a Dehler 38 sq competition.
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
這是台灣野柳地質中心的特色海蝕風化風景-女王頭 分享列印時請標示授權來自野柳地質中心 也請勿轉作販賣營利用途 This is the characteristic sea erosion and weathering landscape of Yehliu Geological Center in Taiwan-Yehliu Queen's Head When sharing and printing, please indicate that the…
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 67x200cm
Water meters frequently come with a half metal wheel that enables to use an inductive sensor as an impulse counter to read water usage data. The Diehl Corona MCI is such a device, it has one rotation per L. The inductive sensor must be…
Mit dieser kleinen Schaufel kann man Mehlwürmer oder Mehlkäfer aufnehmen und vom Futter trennen. Die Schaufel ergänzt mein System zur Mehlwurmzucht: https://www.printables.com/de/model/647981 Druckeinstellungen: Stützen aktivieren. Ich…
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
Needle to create nets. Print on the flat side. May need some sanding if you want the surface to be perfectly smooth (I would recommend to sand under water). Jehla pro výrobu sítí. Tiskněte plochou stranou k podložce. Pro dokonale hladký…
Mehr Informationen hier: https://web.archive.org/web/20220319090655/https://makeprojects.com/de/project/modellschiff-aus-dem-3d-drucker Sietas Typ 168 Natahlie Ehler Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
Jehla pro snadnější prostrčení gumičky rouškou. Needle for easier insertion of rubber band with a cloth.
Ersatz für nicht mehr lieferbares Teil für Hager System 80 SL Zählerschrank. Schnappturm für Deckel im Netzseitigen Anschlussraum. Es gibt zwei Varianten. Mit oder ohne die die seitliche Aufnahme für eine Schraube. Die Teilenummern der…
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
Box for needle files / Krabička na jehlové pilníky
A replica from the coin of the german TV Show "Wer stiehlt mir die Show?", by ProSieben. Diameter of the coin: 150 mm Height of the coin: 10 mm Material: PLA (Copper) Print Time: 4h04min. (with 0,3 mm layer height)
This is my evolution of Pete Prodoehl's Solder Board, which is a parameterised model for securely holding header pins for different-sized microcontroller boards during soldering. I've modified the idea to integrate with my own custom…
Pravidelný trojboký jehlan třeba jako pomůcka pro výuku matematiky. Hrana podstavy jehlanu je navržena dlouhá 5 cm a výška je 6 cm.
Ein kleiner Schiebekalender, von denen zwei bei uns an der Eierablage im Kuehlschrank auf einen Blick das Mindesthaltbarkeitsdatum anzeigen. Aufgrund der mechanischen Belastung und der elastischen Eigenschaften ist der Druck in PETG…
Holder for the rods on the ironing board. Link to the post .
K jehlanu přidána stěnová výška
Ich habe für die entworfen. Stopfen Oben und Unten unterscheiden sich in der Tiefe. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
Stylizovaná fantasy miniatura Jehlové Strážkyně inspirovaná estetikou hry Hollow Knight. Elegantní bojovnice s ikonickou maskou, dlouhou jehlovou zbraní a dynamickým pohybem připomíná atmosféru hlubokých podzemních království a rychlých…
typical Satursday afternoon, after a nice shoping tour we build our new shoe cabinet. During the instalation of one of the drawers the first pivot bearing snaps during inserting the screw. "Hmm, maybe we can glue it" I thought - when my…
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
Mehlwürmer sind ein Leckerbissen für Hühner, Wildvögel und viele andere Tiere. Das hier vorgestellte System habe ich für eine Mehlwurmzucht von kleinem bis mittlerem Umfang entwickelt. Es dient zur Aufzucht von Mehlwürmern und zum Schlupf…
Zcela nové modely lokomotiv a vagónů pro dřevěné vláčkodráhy (Brio, Lidl, Ikea) 🚂 🚃UPDATE: doplněn model se spřáhly na obou stranách pro spojení více lokomotiv Všechny modely zde: BabyTrains Kolekce od autora Ondřej Kabelka |…
Bierhalter für ein 6er Tagerl Beer holder for a 6-pack
Jehlan s podstavou ve tvaru obdélníka. Vytvořený v GeoGebře 3D.
I needed a riser for the Anycubic Vyper with anti vibration feet. I've printed it with TPU, but PLA should be work too. Anti vibration feet https://amzn.eu/d/3F2X5fd
Einfach Praktisch Gut. Infill 30% - es hält !
Tři jehlany mají stejnou podstavu jako je stěna krychle a lze je vložit do “duté” krychle.
The plastic base of my stool has completely disappeared into the chair leg. So here is a base that I designed using Tinkercad. I actually made it for a different chair. It works for all chairs or tables that have a round tube as a leg. In…
Jehlan s podstavou ve tvaru čtverce. Vytvořený v programu GeoGebra 3D.
Wall mount version also available! Holder for safe cooling of the hair straightener after use. There is no risk of damaging wooden or plastic storage surfaces, and there is no need to place the iron on a tiled floor, for example. Version…
No Support, infill 5 -10% Bemaltes Bild ist das Original Painted image is the original
Když se ochranná krytka prošoupe, poškrábe vám trubka podlahu. Včas si vytiskněte náhradu! Vnitřní průměr 22.3 mm. TPU SMARTFIL FLEX Orinoco 93A
Vor dem Backen die Schablone auf den Teigling legen und mit Mehl bestreuen. 162x203cm
To be printed preferably in PETG with >70% infill and 3 walls. has been in prolongued use for over a year without any siginificant signs of wear. use at your own risk
K jehlanu jsou přidány stěnové výšky.
Šířka 130 mm, tloušťka těla 5mm, délka rovné části držáku 20 mm + zahnutí 5 mm. Průměr držáku (kruhový průřez) 5 mm. Tištěno na Průša PETG vrstva 0,3 mm bez podpěr. Díry jsou připravené pro vruty průměru 4 mm.
Das ist mein erster Versuch einer Miniatur. der große Überhang des Lampenteils hat auf der Unterseite wie zu erwarten zu einer relativ unsauberen Oberfläche geführt. Die Lampe lässt sich aber mit entsprechend heruntergesetzter…
this wheel is an exaggerated fit on the ford mustang shelby you only need an iron rod
Einfacher Organizer für eine 1kg Packung Mehl + Mehlsieb + 1 Päckchen Backpulver + 1 Päckchen Vanillezucker.
tisknuto bez podpěr rozměr: 50x23x6
This is simply the Lulzbot Taz 3 Extruder body with Quck fit tabs attached. I've also uploaded the extruder latch for convenience. You will need to find an idler somewhere. Print instructions Category: 3D Printer Parts Summary This is…
Stehlager zz608, Bearing_Mount Category: Hobby
Enjoying a nice beer, keeping track on the number and bring some color to the table, this idea came to my mind. Material used: PLA Printer used: Prusa i3 MK3S, i3 MK3S+ and i3 MK4S To achieve perfectly clear numbers the two-color…
Tento 3D model představuje čtyřstěnný jehlan s otevřeným vnitřním pohledem, který umožňuje snadno vizualizovat jeho jednotlivé části. Model je navržen jako výuková pomůcka, která pomáhá studentům pochopit klíčové geometrické vztahy mezi…
Model je vytvořen na základě výkresu zpracovaným v knize "Val na obranu Republiky". Jako předloha výkresu posloužil zachovaný trn mezi objekty K-S 9 a K-S 10. Odkaz na Českoslovenký ježek:…
Parametrisierbarer Höhenanschlag für Connex Richtlatte, Abziehlatte.
This is a Travel Case for a Mühle Rytmo Shaver . (https://www.muehle-shaving.com/en/Shop/Design-series/RYTMO/) As the model from @Peviox wasn't fitting my razor, i decided to give this well thought design (Thanks for this :-)) a go and…
Stehlager für AluProfil 30x30, Bearing_Mount, zz608 Category: Hobby
Krabička pro jehlu na resetování smartfonu Samsunng. Samsunng smartphone reset needle case.
These are some flat replacement feet for the original Voron 2.4r1. I didn't convert mine fully to r2 yet, so it's still with the original r1 baseplate. The edges are slightly rounded to match the orignal baseplate. Carefull not to tighten…
Tato pomůcko snadno znázorňuje, že objem jehlanu je 1/3 objemu krychle stejné podstavy. Stačí jehlan naplnit vodou a 3x přelít do krychle, která se tímto naplní. Případně je možné vytisknout jehlan 3x a vodu ze všech přelít do krychle - k…
Adapter to use Ton Kooiman Oehler thumb rest with Oscar Adler clarinets
Můj učitel Čínské medicíny chtěl vyrobit jak říká Amádu s akupunkturní jehlou a hlavně to muselo být rozkládací .Jehla je ze dvou půlek slepených lepidlem ,tisknuto něco z PTG a něco z PLA filamentu
Stojan/polička na žehličku k montáži na zeď . 2 verze , Tisk PETG tryska 0,4 vrstva 0,2 4 perimetry infil gyroid 20%
Náhradní krytka kovové trubky žehlícího prkna - nožička.
Ersatzteil zu Geberit Toiletten Spühlung.
INFILL: 25% SUPPORTS: YES (ORGANIC) SHOULD GLUE A RUBER GASKET OR PRINT ONE IN TPU
Žáci vytvoří rozkladný model krychle na šest shodných jehlanů, které poslouží k odvození vzorce pro výpočet pravidelného čtyřbokého jehlanu s následným zobecněním pro kolmý jehlan.
Gedruckt in PETG auf der Seite stehend mit normalen Support, aber auch PLA sollte kein Problem sein - außer euer Mädel duscht auch bei circa 290° C Wassertemperatur… :D Benötigt gerade mal 7g Filament und der Druck dauert eine halbe…
Soubor pro 3D tisk “duté” krychle a jehlanu o maximálním objemu, který lze vepsat do této krychle.
Ich drucke direkt aus Filamenttrocknern. Leider konnte ich für meine Spulen keine passende Silicadose finden, die beim Drehen im Trockner nicht aus der Spule rutschte. Darum habe ich diese Dose entworfen. Die Spule lagere ich mit der Dose…
Vzoreček pro výpočet objemu jehlanu je pro žáky na II. stupni ZŠ náročný pro zapamatování a klade vysoké nároky na představivost žáků.
Simpler Wandhalter für einen Mühle Rocca Simple Wallmount for the Mühle Rocca Fühlt euch frei mir verbessungsvorschläge zu schreiben Feel free to tell me about improvements Settings Filament: PETG Infill : >30% No supports needed
BabyTrains - 110 Žehlička (motorized 🔋) en Complete electronics kit (motor, battery, PCB and components) is available from LaskaKit BabyTrains . Just print the parts and assemble. 📝What is BabyTrains? Story here . Overview of All Models…
Stehlager für Lager 22x8x7 Außen x Innen x Dicke
Bei Camperkühlschränken der Serie 10 von Dometic steht der Bedienungsknopf heraus, so dass man leicht versehentlich den Kühlschrank ausschalten kann, wenn man dagegenlehnt. Dieser Schutz wird mit doppelseitigem Klebeband über den Knopf…
The set came in a blister and since the needles need to be kept sharp, you cannot just throw them together in the sewing basket. This box has bespoke cutouts for all the parts. There is a hidden channel to stow the threading wire. It…
Jehla k navlékání gumy do kalhot, Sewing bodkin
Sicherer Stand und Bodenschutz: Haltbare Ersatzfüße für Stehleitern Die originalen Kunststoff- oder Gummifüße von Haushaltsleitern werden mit der Zeit spröde, brechen oder gehen verloren. Das führt zu gefährlichem Wackeln und hässlichen…
Mehlfang für die Back to Basics Getreidemühle Das Teil sogt dafür dass das frisch gemahlene Korn nicht so weit nach rechts und links wegfliegen kann und schön nach unten in die Schüssel fällt. Es wird einfach aufgesteckt und sitzt dank…
I own a Dehler 34 built in '91 (also known as Optima 106) and after more than 30 years the plastic bushings used to prevent direct contact between the metal stairs and the rear door paint are in very bad shape so i made this quick model…
Box na uskladnění a organizaci jehel do šicího stroje. Do přihrádky se vejde buď 1 krabička s jehlama nebo 2 krabičky jehel Schmetz
Dieses Modell ist Teil meines Systems zur Zucht von Mehlwürmern (siehe https://www.printables.com/de/model/647981 ) Dieser Rahmen paßt zum rechteckigen Eimer mit 4,4 l Inhalt von Auer Packaging. Wenn man den Boden aus dem Eimer…
These dc motors were sold for cheap on internet auctions. So i had to create this fan housing to use them in RC models. Use supports inside of this part if needed. It fits with bayonet locks on the motors metal studs. No screws or glue…
Habe mal auf die schnelle eine Bohrmehlschale gemacht da ich gerade eine brauchte und ich keine Zeit hatte die üblichen Plattformen ewig zu durchsuchen. Mir hat sie gestern gute Dienste erwiesen da sie nicht zu klobig ausfällt und man sie…
I made this because we had tool holders in a drawer and they were rolling to each other. I could not find something to purchase so I designed my own. Made a rack of alu and put them in.
Matrial Liste Shelly1 Plus https://amzn.eu/d/jeSg7Hy Shelly addon plus https://amzn.eu/d/1RCTeYq Getriebe Motor12V https://amzn.eu/d/31Z5YPz IR Lichtschranke https://amzn.eu/d/15a5nTm Netzteil 12v https://amzn.eu/d/1JNlGSw Kugellager…
vytvořil jsem držák pro ampule pro čistící jehly z amazonu https://www.amazon.de/dp/B0D9NJL143?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 přidal jsem jedno držení pro ampuli pro originál od PRUSI tento držák pak přidělám někam na stěnu či do…
Use this to mount a 12mm (dia) inductive sensor to your x-carriage. (was 8mm before; I recommend a 12mm sensor because they have a longer detection distance) The x-carriage is this one: http://www.thingiverse.com/thing:16208 (mine is…
This is my own customization of Jonaskuehling gregs wade v3 to use a little geared motor (from 2engineers) on a Prusa iT3 Instructions Use the 24mm or the 30mm file for your X-carriage, or you can use the parametric scad. Category: 3D…