481 models
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €11.34–€13.86 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €9.14–€11.17 excl. taxPreliminary estimate for PETGSource material: PET
My compressor broke its oil-cap. The cap was just a threaded piece, with a hollow cylinder above, and a small hole all the way through the top to allow pass of air, as replicated here. I'd recommend printing standing upright, with threads…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Heat gun Einhell TH-HA 2000/1 wall mount
Print approx. €7.28–€8.89 excl. taxPreliminary estimate for one variant
Print approx. €9.39–€11.47 excl. taxPreliminary estimate for PETGSource material: PET
A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
adapter for dewalt orbital sander to einhell vacuum cleaner
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Vacuum Adapter for Einhell-tc-sb-305-u-band-saw. added Fusion file for remix.
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for PETGSource material: PET
Damit das OSVAC-System auch an dieser Flachdübelfräse verwendet werden kann. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Anschluß in Tinkercad erstellt und angebaut.
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Schlauchaufnahme ca. 25 mm tief konisch: unten ca. 34 mm; oben ca. 34,7 mm
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
I've remodeled the adapter from scratch because my old adapter ( https://www.printables.com/model/98138-battery-adapter-einhell-power-x-change-general-pur ), that was based on another design, has some issues. You will also need: 2 crimp…
Einhell Akku Wandhalterung
I was not satisfied with the designs online so i designed my own. Most of the Designs are printed when standing so they easily crack when tightening. My design can be printed laying as shown in the pictures. Optionally I also added a…
Battery holder Einhell Power X Change 18V Support mural de batterie Einhell Power X Change 18V
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm Nozzle: 0.4mm…
+++Update 09.03.2024+++ I got feedback that the adapter seems not to fit to everybodys parkside tools. To be honest, I designed the adapter without having an original parkside battery pack available! I just used my parside saw to do the…
https://www.instagram.com/p/CxC2cuXtt8K/
I bought recently a Einhell GE-CT 18 Li cordless grass trimmer. So here's blades for it. Might fit other trimmers too, Bosch blade looks identical. Red blade is original, blue one is printed. Print Settings Printer Brand: Prusa Printer:…
Drill Holder for Einhell TC-CD 18/35 Li-Solo
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
Simple Holder for Einhell Varrito allround tool
This is an adapter to use Einhell Power-X-Change batteries on Makita tools. You will also need: 2 “Car Insurance Fuse Holder Terminal” or “Fuse Box Terminal” (e.g. https://www.aliexpress.com/item/4000501759991.html ) 2 crimp spade…
Machine-battery adapter for a machine that originally uses a Parkside PAB-18 1.5 A1 battery. This adapter enables to mount Einhell Power X-Change batteries to the Parkside machines. Extra stuff you need: some wiring and a soldering…
I used battery adapter from @Hans_193091 and updated design to work with frame of the work light. There are left and right side of the frame so wiring is easier. Both sides are held together by the bolt that holds light itself in the…
This nozzle is designed with a 3/8ths screw fitment that is compatible with the Einhell DG-10 air compressor blow out gun. All the nozzle stls I found online were for much bigger threads than the 3/8ths that the DG-10 has. It has a nice…
A bit holder for Einhell power xchange tools like impact driver, dril, etc. Can be attached on both sides.
Ho disegnato un supporto per posizionare il mio trapano e l'avvitatore ad impulsi di Einhell I designed a holder to place my drill and Einhell impact wrench Print Settings Printer: TronXY X5SA Pro Rafts: Doesn't Matter Supports: Yes…
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm…
Quick and easy print - use any layer height and infill. I printed in PETG, the replacement blades are still consumable so don't expect them to last long. Maybe a nylon or PC filament would be more durable, but PLA and PETG are pretty…
A stable and easy to print adapter to use your Makita batteries with Einhell PowerXChange tools. Fit is pretty thight but not sticking. Included the supports for the Makita locking in the drawing to save supportmaterial. Simply remove it…
The holder with V2 fits to most machines, I tested with my tools like TE-CW TE-CD (2 different types) TE-CI The version V3 is 5mm more height than V2 and fits bit better to TE-Z machine, but the V2 works too. The holder fits tight, so the…
Da mir mein 3ah Akku kaputt gegangen ist, habe ich ein neues Gehäuse erstellt. Ich habe Denn Deckel mit Stützen gedruckt und in 0,2 Schicht. Zum Zusammenschrauben des Gehäuses habe ich die alten Originalschrauben Benutzt. Das einzige, was…
ATTENTION: You need to be able to split the tool along the Battery bay. You Need: 1x all 3 printed parts 1x (M)3x8mm countersunkscrew 2x (M)3x6mm allenkey bolt 2x 54x19x1mm metalstrip as contactors for the battery, need to be bend in…
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Remixed the holder to make it mount to the ikea skadis walls. Also made more space for the battery, so it slides easier in and out. Printing it upright with organic supports seems to be the optimal way. There is also the .step file if you…
Parkside batteries are often available at low prices. With this adapter, you can connect a Parkside battery to Einhell devices. The focus of the design was on printing without critical overhangs so that printing is possible even without…
With Prusa's new rewards system, if you like this model, PLEASE click the like button Print with supports, should only need them between the body inner and the overhang rail. Pin inserts have been salvaged from a defective cordless drill…
I made this adapter to get 4 Quickcharge ports out of my Einhell battery. With this the battery is transformed to a very powerful powerbank. You could quickly charge 4 smartphones or use 4 TS80 (successor of the TS100, not tested). Edit…
Simple Blade and yes it may be cheaper to buy some, but what if you need one right now and the shops are closed XD
A Remix of a3lex "Breakout connector for Ozito powe rXchange 18V Lithium battery pack" Main changes are extra holes for mounting and I reduced the amount of material around the battery tabs. Battery tabs are made from copper pipe saddles…
Der Adapter lässt sich ohne Stützstrukturen drucken. Benötigt werden 4 rote 6,35mm Crimp-Stecker und eine XT60BE-F Buchse sowie Kabel mit ausreichend Querschnitt (≥1,5²). Im Bild sind die Kabel noch nicht zu sehen, aber die Kabel können…
Remixed from https://www.thingiverse.com/thing:4432312 Printed with supports only on the hooks. During installation you may need to bend a little bit the skids pegboard. Any advice is welcome, good printing.
Steckdose für die kleine Stromversorgung z.B. im Gartenhaus. ausgelegt für M3 Gewindeeinsätze. ---------------------------------------------- Socket for small power supply projects. I use it for a garden shed electrification Use M3…
Holder for Einhell batteries, spaced out to grab between them.
Remix of Hans' adapter to include holes for M3 screws.
Sistema di supporto Batterie per Einhell Power X-Change sostiene 2 batterie a riposo Realizzato in PLA, io l'ho stampato in verticale, ma non dovrebbe cambiare molto la funzionalità. Dopo la stampa mi sono accorto dell'inutilità della…
The magnets have a diameter of 6 mm and a height of 2 mm.
This model is the negative form of the shoe for connecting an Einhell Power X-Change battery. This means you can use this shape to cut out the appropriate recess on any other model. Technically, this model is not based on the model…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
Wall holder simulating Einhell 18V X-Change battery to attach different battery adapters like MAK18EIN (adapter to connect einhell 18V battery to makita) or BOS18EIN (adapter to connect einhell 18V battery to bosch) or similar adapter.…
Easy Wallmount for Einhell TE-JS 18 Jigsaw. Maybe also for other ones.
Einfacher Halter für Einhell Power X-Change Akku. 3 Modelle: 1 Akku - 2 Akku - 3 Akku Schnell Druckbar. Keine Stützen. Simple holder for Einhell Power X-Change batteries. 3 models: 1 battery, 2 batteries, and 3 batteries. Quickly…
printed with PLA+. Glued a 6mm/2mm magnet disc inside the hex pockets to hold the bits more firmly. 4mm hex screw to mount it to the side adapters on the drill. I printed it with the bottom on the print plate and support on the connector…
I make this table saw slides for my Einhell RT-TS 1725 U. Using it for some table saw jigs.
Edit 01.08.2025: Zurzeit wird ein neues Zahnrad getestet, da anscheinend das aktuelle Zahnrad mit dem Zahnriemen zu stark abnutzt und die Riemenspannung zu hoch ist! Suche hierfür auch ein paar Leute die dies für mich testen! Um eine…
Parameterizable in slicer, Einhell logo. Filament replacement is required for the letters. Szeletelőben paraméterezhető, Einhell logo. A betűknél filament csere szükséges.
Hose adapter for Einhell shop vacuum cleaner if you want to use separate hose other then the one supplyed from manufacturer. It has rotating hose base, the rotation will or will not work depending on your material and how dialed your…
Halterung für zwei Akkus von Einhell
Einhell Ladegerät Power-X 18v PXC Wandhalter Der Wandhalter wurde im meinem Fall mit vier 4x30 Senkkopfschrauben an der Wand befestigt sowie das Einhell Ladegerät mit drei 3x12 Linsenkopfschrauben und mit jeweils zwei M3 Muttern vor und…
🔧 Update – June 22, 2025 – Version 8: Added a rear tab (lug) to the blade to reinforce the area that tended to deform at high speed. Thanks to this improvement, the blade lasts much longer before coming loose. The right-side teeth have…
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
Einhell E-Case Box divider see ... download ... print Notice--> If you need a special one, do not hasitate to contact me i will construct one. The thing is there are two angle which need take a look on. Have Fun, Don´t hesitate to give a…
modified for wall mounting with screws or similar. You need 3x M3 heat-set inserts and M3x8mm screws.
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
update 09.02.2023 added geometry for holder of drill handle PS: my print quality looks very poor on this image.. probably printed it a bit too fast – and the angle of the light makes it look ugly hehe.
An adapter to connect the battery pack from Einhell machienes to cables through Flat receptacles in the intended slots
An holder for the battery of the Einhell Power X-Change 20 V system. You will also need 2 M5x6 SHCS. Screw the screws in the holes on the back side. Adjust the depth of the screw so that the friction with the pegboard is just right (=…
This is a machine-battery adapter for a Parkside drill that originally used 18V Ni-Cd batteries and is now able to mount 18V Li-Ion batteries (in this case Einhell Power-X-Change). The drill works perfectly with the new batteries, even…
EN: Einhell Power X-Change battery holder. The model was designed with an emphasis on simple and fast printing - the printing time does not take more than 4 hours. For fix use 2 wood screw with diameter 3.5 - 4 mm Printing without…
Halterung für die Einhell Power X change Li Akkus. Verwendbar für Wand- oder über Kopf-Montage. Dazu eine einfach zu montierende Halterung für die 3A Ladestation (Power X Charger 3A). Holder for the Einhell Power X change Li batteries.…
This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery. I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB…
A very simple to print holder for the Einhell PowerXChange 3A Battery charger on Skadis Pegboard. No Supports needed. A bit difficult to mount on Skadis but holds perfectly. Print the hook two times
Abdeckkappe für einen Einhell Akku der Power X-Change Serie. Ich habe ihn für meine 18V / 4Ah Akkus konstruiert. Die Abdeckkappe hat auf der Innenseite bereits zwei Bohrungen mit Senkungen angedeutet. Man kann sie somit auch als…
This model have 2 variants: print all at once (if you have confidence in your layer adhesion) - file “Einhell PowerXChange_1.stl” print in parts and conect using threaded inserts and M3 screws “Einhell PowerXChange_1a - Einhell…
Over time i really appreciate the battery driven tools from Einhell, so another one joined my Einhell park. The Einhell TE-AP 18 Cordless All Purpose Saw which of course needed an appropriate holder for the Einhell wall … Print with flat…
Wall brackets for Ozito (Einhell) PXC 18V Workshop Blower and Inflator. I designed these wall brackets for the Ozito (Einhell) PXC 18V Workshop Blower and Inflator and associated accessories. There is provision for a dowel pin in the…
Ozito/Einhell PXC tool and battery mounts. Screw holes are designed to accept 40mm 10g screws. I printed these in PETG with 30% infill and 4 walls/layers and they are very strong. Depending on the age of your tools the mounts may need…
Einhell battery adapter for Makita tools Removed what I didn't need and changed the dimensions to fit my tool more precisely Category: Machine Tools
Dieser Adapter ermöglicht die Nutzung von 20V-Ferrex-Tools mit Einhell-Power-X-Change Akkus. Wer schon Einhell-Akkus und Ladegerät hat, und ein preisgünstiges Ferrex-20V-Akku-Tool von Aldi gelegentlich nutzen möchte ohne sich Ferrex-Akkus…
Just print with enough infill to increase rigidity
An adapter to mount a common garden hose quick-lock to an Einhell dipping pump.
Parts to replace the current 32mm sized hose and tools on my Einhell shop vac with a larger diameter (50mm) hose - I found I kept getting clogs in the hose vacuuming up chips and swarf from around my machine tools. Print instructions All…
A replacement head for the Einhell Trimmer GC-CT 18/24. It replaces the original single-blade-head with a multi-blade head. (The provided .stl files only have three blades, but you could go with more by editing the .scad file, or using…
When modifying battery pack be careful. Recommended: Model is possible to print without any support, for that you need to rotate model for 180° and offset Z for -10 mm (as in second picture). Material: PLA (after one year of use it is…
Deutsch: Einfache Halterung zur Montage unter einem Regalbrett. Passend zum Einhell Model TE-CD 18/2 Li. English: Simple bracket for mounting under a shelf tray. Suitable for model Einhell TE-CD 18/2 Li. If you'd like to support my work…
allgemeiner Anschluss für Einhell Power X-Change Akkus für diverse Projekte. Unter anderem für Lab Power Supply
Update 18.2.24: Step-File zugefügt Staubsauger-Adapter für Einhell Flachdübelfräse TC-BJ 900. Der Ausgang hat einen Durchmesser von 35mm. Die Freecad-Datei ist angefügt, der Ausgang kann also auf die jeweiligen Bedürfnisse angepaßt werden.
Einhell axxio 18/125 drill sharpener 135 degree and relief 10 degrees. Feel free to remix - f3d file is added. Remember to wear the protection glasses and use your head ;)
Ich habe den Adapter für meine Zwecke in PETG mit 100% infill gedruckt um eine hohe Stabilität zu erreichen. Der Durchmesser für den Mähfaden liegt bei 2mm.
A wall mount for the Einhell battery x-change batteries. Can be printed without support. The slot is bidirectional, so no way to print/mount it the wrong way around (kind of)
You need to print 4 bottom support files
This is an alternative vacuum adapter for the Einhell router/Oberfräse TC-RO 1155 E since for my case the original vacuum guide was too often unhandy. You can screw it in the exsting holes and everything will snap in place properly…
I needed a track saw for a project on the same day, and couldn't find a cheap one available on the shelve with track compatible with makita / festool so I went for the einhell (although I have bad experience with that brand). This saw…
Simple adapter for einhell x-change battery packs with 18v or 12v. Einfacher Adapter für Einhell X-Change Akkupacks mit 18V oder 12V.
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
![[Euro Pegboard] Einhell Power X-Change 20 V Battery Holder](https://media.printables.com/media/prints/243611/images/2196845_1c060434-0eba-4435-ac75-bf8fccabcdfb/img_20220717_204407.jpg)
