1 / 1
Makita Battery Einhell Tool Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fixed in place Makita battery to Einhell tool adapter.
- Rating
- 0 / 5
- Likes
- 48
- Downloads
- 422
- Makes
- 0
- Views
- 3,957
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ATTENTION:
You need to be able to split the tool along the Battery bay.
You Need:
- 1x all 3 printed parts
- 1x (M)3x8mm countersunkscrew
- 2x (M)3x6mm allenkey bolt
- 2x 54x19x1mm metalstrip as contactors for the battery, need to be bend in shape
- glue
Instructions:
- Print all the parts
- Bend the metal strips 29-16-9 and place it in the terminalblock
- open the tool
- cut off the original batteryconnector
- put the wires through the “Makita_Battery_Einhell_Tool_Adapter_ToolAdapter”
- solder the wire accordingly to the metalstrips
- the polarity is printed on the Makita battery
- glue the terminalblock in the “BatteryHolder”
- screw the “ToolAdapter” to the ”terminalblock" and the “BatteryHolder”
- place the adapter like a battery in the tool
- close the tool
The filament I used is the: