Search results: elif

Sort order

Counting matching models…

P
PrintablesTomáš Kostiha

TrueLife NannyCam H32 - holder

Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…

Downloads
423
Likes
27
Rating
4.62
P
PrintablesIndy

BMW e46 Touring facelift keys pendant

model BMW e46 Touring facelift keychain

Downloads
137
Likes
10
Rating
0

držák kamery chůvičky TRUELIFE NannyCam V24 PRO

Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.

Downloads
132
Likes
1
Rating
0
P
Printablescomartist

Rituals Holder for Mercedes Benz V class W447 (facelift, model year 2025)

I needed a Rituals fragrance dispenser holder for my Mercedes Benz V-Class (facelift, model year 2025) with the central ventilation slots. My holder is used instead of the original holder and is attached to the plastic bars on the back of…

Downloads
106
Likes
7
Rating
0
P
PrintablesTalariaTom

Krytky odsřikovačů Octavia 2 Facelift

Krytky pouze hladké - přilepeny kvalitní oboustrankou - tisteno na skle Covers - use with doublesided tape-printed on glass

Downloads
76
Likes
4
Rating
0
P
PrintablesBugkiller

Toyota GT86 (First Gen. Facelift) Silhouette Keychain

Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my rally style GT86 so it is lifted slightly and dimensions may be off by a bit. About 2 3/4" x 1" x 1/8" for the original model…

Downloads
33
Likes
2
Rating
0
P
PrintablesRPK

Needle files Case - Filelifter

EN: I was looking for a box for my needle files some time ago and found a nice model from clivebradshaw and remixed it with an label. ( https://www.printables.com/model/862033-needlefilebox-10-pcs-140mm-bicolor-no-mmu-labels-i ). Because…

Downloads
18
Likes
1
Rating
0

Coin Box for Tesla Model 3 facelift

This is Coin Box for Tesla model 3 after facelift in center panel. It contains larger grooves for bigger coins and smaller one too. It prevents them to slide when driving. Container next to it has rounded bottom so it is easier to take…

Downloads
15
Likes
1
Rating
0
P
PrintablesRiNax

CarPlay Display Mount for Volkswagen Up! Skoda CitiGo and Seat Mii (pre facelift)

You need to unscrew the two Torx from the original Base and replace them with 25mm M4 (DIN 912 fits perfectly for my model). Bonus: if you delete the electronics from the base you can put the cables for the unit through the base and my…

Downloads
956
Likes
44
Rating
0
P

PRUSA MK3 facelift display cover (MK4 Style)

Display cover for PRUSA MK3 (MK3S and MKS+MK3S+) in style of the new PRUSA MK4 . The cover is “click on”! , just remove the 2 M3 screws holding original cover and click the new cover on. I printed the text over mine with UV printer, but I…

Downloads
412
Likes
110
Rating
4.89
P
PrintablesHMC Motorsports

Headlight Duct Honda Civic EK9 / EJ9 (facelift version: '98-'00)

Left Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for K-Swapped cars with air filter on left side. Mounting holes to be drilled upon fitment. Package includes: -Entire headlight as a…

Downloads
366
Likes
34
Rating
0

Front tow hook cover (pre-facelift) for BMW E39

Front tow hook cover for BMW E39 vehicles with pre-facelift bumper (1995 to 2000). *Normal PLA is not suitable for this application. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 24% Filament: Generic…

Downloads
366
Likes
31
Rating
0
P
PrintablesNlKO33

truelife NannyCam V24 mount

Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…

Downloads
326
Likes
12
Rating
4.83
P
PrintablesAndrew Keyser

VW Golf 1 Cabriolet Facelift (1988-1993) 4-round Grille Screw Caps

The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…

Downloads
318
Likes
24
Rating
0
P
PrintablesHMC Motorsports

Right Headlight Duct Honda Civic EK9 / EJ9 (facelift version: '98-'00)

Right Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for OEM D-Series or B-Series cars with air filter on right side. Mounting holes to be drilled upon fitment. Package includes:…

Downloads
234
Likes
20
Rating
0
P
PrintablesLWC

RG351P Gamepad holder V2 "Facelift"

!!IMPORTANT!! DO NOT just slide your RG351P into the Game pad holder after Printing!! There is one important task to do before you can safely attach your Handheld to the game pad holder! CHECK Pictures for instructions!! Heat the marked…

Downloads
189
Likes
13
Rating
5
P
PrintablesSushi

Camera Holder of TrueLife NannyCam H32 - faster print

Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…

Downloads
184
Likes
9
Rating
5
P
PrintablesMickeyMouse

Yaris MK1 (facelift) front door speaker rings/adapters

Front door speaker adapters for Toyota Yaris Facelift MK1 5 door model (2002 - 2005). There is a complete lack of this specific model on the internet, so I thought I'd create it and share. Modeled by measuring the factory speakers and…

Downloads
173
Likes
16
Rating
0
P
PrintablesMr. Smith

Cupra Leon Facelift - Smartphone Magsafe Dock

Ich wollte für meine Smartphone Magsafe eine passende Halterung in einer guten ergonomischen Reichweite haben. Daher habe ich für den Cupra Leon bzw. Formentor Facelift eine Halterung selbst entworfen. Es fehlt nur ein Magsafe Dock mit…

Downloads
167
Likes
9
Rating
0
P
Printables3dprintkings

Mercedes-Benz AMG A45 (W176 Facelift)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains

Downloads
147
Likes
21
Rating
4
P
PrintablesSchumo

Volkswagen T5 Facelift Webasto Multicontrol Dashboard holder

This is a remix of the VW T5 Dashboard switch cover by ChristofSchwiening on Thingiverse. I added a holder to fit the Webasto Multicontrol remote for your stationary heating. It fits for all VW T5 Facelift (T5.2 in Europe/T5.1 in the UK)…

Downloads
144
Likes
9
Rating
0
P
Printablesanthan.cz

TrueLife NannyCam camera holder - Version v2

After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…

Downloads
132
Likes
8
Rating
5

mazda 3 (facelift) keychain

a mazda 3 keychain, what else you need?

Downloads
124
Likes
18
Rating
5
P
Printableskryvian

car phone/tablet holder for Skoda Octavia 2 Facelift 2010

Phone and tablet holder 2 in 1 for Skoda Octavia 2 Facelift 2010 dashboard compartment, the holder has two arms that lock around the compartment door hinges, you can easily install and take it off with one hand motion. I forgot what…

Downloads
116
Likes
26
Rating
0
P
PrintablesFaasteer

Stand for TrueLife electric toothbrush

Simple stand for TrueLife SonicBrush Compact Duo and several spare heads. I made it because these toothbrushes have a slightly different dimension than the others and my wife and I wanted something that would match the other accessories…

Downloads
109
Likes
9
Rating
5
P
PrintablesTomik s Cuprou

SEAT Leon5F Cupra Facelift Front Rear Emblem Logo

Includes: Two types of front badges Rear handle Compatible with all body versions. Only for facelift vehicles. I recommend printing in ASA, or alternatively ABS or PETG. Facelift is here:…

Downloads
103
Likes
8
Rating
0
P
Printableswiryale

Seat Leon FR 5F Pre-Facelift (2013 - 2016) FR Badge

SEAT Leon 5F FR Logos — Pre-Facelift (2012–2016) Custom 3D-printed FR badges designed specifically for the SEAT Leon 5F pre-facelift (2012–2016) . You will find two different model options depending on your printer setup: 🟥 For…

Downloads
103
Likes
8
Rating
5
P
Printablesnimus

Prusa MINI/MINI+ MINDA holder with cable stress relif and M3 heat set insert

Remix of the original R2 part inspired by the first revision of https://www.printables.com/model/247005 design with M3 heat set insert. This model made from original step file for M3x5x4 heat set inserts. .step and .stl - files are…

Downloads
102
Likes
16
Rating
5
P
PrintablesAirmaxo

Car Storage with room for drinks VW Golf 8 facelift

No support Nozzle: 0.4 Layer: 0.2 Infill: 15% Like the original

Downloads
98
Likes
21
Rating
0
P
PrintablesArkieGuy

Panel Mount - MELIFE Type-C USB-C Trigger Module

This model is a panel mount for a USB-C trigger from Amazon. The trigger can request a fixed voltages from a USB PD power supply for project use. To print this, I split the “Trigger-Insert” file in PrusaSlicer. I also included a “blank”…

Downloads
92
Likes
18
Rating
5
P
Printables3dprintkings

Audi TT (FV/8S Facelift)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains

Downloads
79
Likes
13
Rating
0
P
PrintablesAntonio36996

BikeLifter Vertical 3D Rack (Aparcabicis Vertical)

🚀 NEW VERSION (UPDATED DEC-2025) (NOW USES SQUARE PROFILES) The BikeLifter 3D Rack is a vertical, free-standing bicycle storage solution designed to maximize space in rental apartments, offices, and shared spaces. It requires no drilling…

Downloads
67
Likes
73
Rating
0
P
PrintablesThe Keybord

Ford Fiesta MK7 facelift keychain

MK7 facelift or MK7.5 Ford Fiesta, the version with grill, i'm a bit lazy to remove the text so you could edit it yourself in Tinkercad or whatever

Downloads
64
Likes
9
Rating
0
P
PrintablesPandaStudio

inspired by Audi A5 (gen. 8T facelift) - keychain

Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…

Downloads
60
Likes
8
Rating
0
P
PrintablesLucien Picard

Belife Cordless Vacuum accessories holder

Wall mount holder for vacuum accessories. This holds the 2 tips that came with the Belife Cordless Vacuum from Amazon. I'm pretty sure Amazon sells other vacuums like this under different brand names. See Tinkercad screenshots for…

Downloads
57
Likes
5
Rating
0
P
PrintablesorhaN_utanG

Granboard Wall Bracket - for CyeeLife stand

Edit 05/2024. The design has been made by my dear friend "Jacek" who sadly passed away last year. Love you, brother. I would appreciate comments if the design was helpful to you so i can show them to his parents. Stand/Tripod:…

Downloads
54
Likes
4
Rating
0
P
PrintablesSimply Maker

Upgrade Parts for RELIFE RL-601L PCB Fixture

Upgrade part for RELIFE RL-601L quick release PCB fixture for improved versatility and stability in various soldering tasks. This easy upgrade increases the clamp height, enabling you to securely hold PCBs with taller components,…

Downloads
50
Likes
30
Rating
0
P
PrintablesJerry

EliFix magnetic car track ground connectors

Connector for enforcing connection between magnetic tiles on a ground level. Compatible with MNTL, Picasso Tiles.

Downloads
50
Likes
7
Rating
0
P

Volkswagen Tiguan 1 (facelift) card slot phone holder adapter

A compact adapter for a phone holder, featuring a standard 17mm ball joint and designed to fit into the card slot. Tested on Volkswagen Tiguan 1 (facelift) I used PETG, 0.2mm layer, 40% infill and supports.

Downloads
47
Likes
6
Rating
0
P
Printablesmodel_bus_spsd

Iveco Urbanway 18M Hybrid (facelift)

Autobus, který prochází z Pražské autobusové flotily. Tento autobus je od výrobce Iveco a je to přesněji je to typ Iveco Urbanway 18M Hybrid ale tento model je již po faceliftu.

Downloads
45
Likes
6
Rating
0
P
Printablesclayj

BBQ GrateLifter 1.0

I have one of those Weber barbecue grills that can be converted on one side from a grill to a small griddle. The challenge is that the grates fit snugly with the grill box, so it's tricky to lift the grates out when you want to convert…

Downloads
42
Likes
14
Rating
0
P
PrintablesSyntex97

Becherhalter für den Audi A4 B5 Vorfacelift

Audi A4 B5 Becherhalter / Cup Holder – Pre-Facelift 1995–1999 Praktischer 3D-druckbarer Becherhalter für den Audi A4 B5 Vorfacelift , Baujahr ca. 1995–1999 . Der Halter bietet Platz für zwei Getränke und zusätzlich ein kleines mittleres…

Downloads
42
Likes
4
Rating
0
P
PrintablesMartin Hlupik

Truelife tootbrush Stand

Filament PLA Nozzle 0,4

Downloads
42
Likes
1
Rating
5

3D Printable Arabic Alphabet and Harakats (Elif-Ba for Quran Reading)

Bu model, Kur’an okumayı Elif-Ba yöntemiyle öğrenmek isteyenler için hazırlanmış 3D yazdırılabilir Arap alfabesi ve hareke işaretleri setidir. İçerik: • Tüm Arap harfleri (yalnız duran formda) • Temel harekeler: Üstün, Esre, Ötre • Diğer…

Downloads
40
Likes
7
Rating
0
P
PrintablesHugo

Stanley Fatmax Tradelift "Pariser"

Dieser Überzieher für das Einhand-Montagewerkzeug Stanley Fatmax Tradelift FMHT83550-1 oder FMHT83552-1 dient zum Schutz der zu hebenden Last gegen Kratzer, Beulen, usw. Das Druckteil ist leicht herzustellen, ich habe es in TPU gedruckt.…

Downloads
39
Likes
6
Rating
0
P
Printablesanthan.cz

TrueLife NannyCam camera holder

New better version V2 here - TrueLife NannyCam camera holder - Version v2 od autora anthan.cz | Stáhněte si zdarma STL model | Printables.com Holder for TrueLife NannyCam H32 babyphone fits to edge of bed suitable for width 20-28mm only…

Downloads
37
Likes
2
Rating
0
P
Printablesmarvmilo

Fiat 500 (312 Facelift) Cup Holder Insert

🧩 About This Model This is a custom-designed cup holder insert made to fit the Fiat 500 (312 facelift model) . I aimed to recreate the look and fit of the original factory design as closely as possible, making it a neat and useful…

Downloads
37
Likes
4
Rating
0
P
PrintablesJakob G.

Extruder Facelift, googly eyes and mustache for your printhead! A1

For single extruder/ no AMS: Step 1: print the mustache using black filament Step 2: print the eyes (make sure to add a PAUSE AT LAYER 4 ) Step 3: change filament to white and resume printing Glue the parts to your extruder using double…

Downloads
36
Likes
5
Rating
0
P
PrintablesMiroslav Matyas

Truelife toothbrush holder

Standard print on PLA, holder glued to the wall.

Downloads
36
Likes
8
Rating
0
P
PrintablesJerry

EliFix magntic car track corner connectors

Connector for enforcing connection between magnetic tiles on a ground level. Compatible with MNTL, Picasso Tiles.

Downloads
33
Likes
3
Rating
0
P
Printablesjcg67cz

Truelife nannycam R6 holder

Update 6th May 2026: Thanks to mara5740_276777 I realized one file was missing. Just now added as "molette M6-Body" easy to print holder to fix the truelife nannycam R6 camera. PLA, layer 0.2 mm. Update: a second version for the base of…

Downloads
32
Likes
1
Rating
0
P
PrintablesLoganLuckLess

Jeep ZJ pre-facelift single din android auto radio adapter

This is an android auto adapter for the first generation of Jeep Grand Cherokee otherwise known as the ZJ. Will for sure fit a 1993- 1995 Jeep Grand Cherokee and I assume other cars with the same mounting. This is a 1.5 din to single din…

Downloads
32
Likes
3
Rating
0
P
PrintablesMr. Smith

Cupra Leon - Facelift 2025 Fishermans Box

Ich habe die Dose selbst entworfen. Da ich keine Passende Dose für den Getränkehalter gefunden habe. Ich habe diese mit 3 Wandstärken und 0,18 Schichthöhe bei einer 0,4 Nozzle gedruckt.

Downloads
31
Likes
5
Rating
0

La Mamba Cinelifter GPS mount

Gives the Ability to mount a MATEKSYS M8Q-5883 GPS Module or similar to the side of the fpv frame using 2 longer screws provided in the frame kit with 2 nuts in the camera plate attach point to the top plate. Print Settings Printer Brand:…

Downloads
30
Likes
1
Rating
0
P
PrintablesJezzaWalker

Volvo P1 (S40, V50, C30, C70) pre-facelift headlight adjustment screws

I had to replace the leveling adjustment screws in my '08 C30 after the previous owner completely stripped them out. I haven't tested if these fit on other headlights in the P1 lineup, but it should be the same. Let me know! Unfortunately…

Downloads
29
Likes
2
Rating
0
P
PrintablesFerrariGuy

Jaguar XJS Facelift PM5 Connector Clip for AC Compressor

Derivative of the snap in clip locating the PM5 Connector for the AC Compressor on a Facelift V12 Jaguar XJS. This model is threaded w/ a nut instead of a snap-in stud and spring-umbrella. 2 Versions available: One with stud attached to…

Downloads
29
Likes
2
Rating
0
P
PrintablesBrandon M

Fan base plate for GoveeLife Smart Fan

Fan baseplate for GoveeLife Smart Fan, has routing for the power cord and 85mm threads to securely mount onto the base. Tested on the Govee 7100 Smart Fan, may work on the 36" model as well

Downloads
27
Likes
3
Rating
0
P
PrintablesPandaStudio

inspired by Audi A8 (gen. D4 facelift) - keychain

Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…

Downloads
25
Likes
5
Rating
0
P
PrintablesHana Matenova

Truelife NannyCam H32 holder

Can be easily mounted on various surfaces using a double sided heavy duty adhesive tape. Be sure to clean any dirt and oil from surface before applying the tape. Print from PLA.

Downloads
25
Likes
4
Rating
4
P
PrintablesHannes

Truelife SonicBrush Clean30 Duo stand

Zjistil jsem, že kartáčky Clean30 od TrueLife nejsou úplně kulaté, tak jsem vytvořil tento jednoduchý model Duo, bez zbytečných otvorů pro náhradní hlavice, na které se stejně jen práší.

Downloads
24
Likes
2
Rating
0
P
Printablesmodel_bus_spsd

Iveco Streetway 12M (facelift)

Model pochází z flotily pražských autobusů a jedná se o typ Iveco Streetway, ale o variantů, která už prošla faceliftem.

Downloads
24
Likes
2
Rating
0

La Mamba Cinelifter Rear Gopro mount

Custom mount using the rear 2 frame screws on the la mamba fpv frame and one zip tie to attach a GoPro mount giving you the ability to mount a gopro backwards or to mount a 3rd person GoPro angle to the drone. used 3 of the following…

Downloads
24
Likes
2
Rating
0
P
PrintablesRefridgerating

BeLife BVC12 Vacuum Attachments Attachment

Belife BVC12 vacuum attachments attachment. Easily clip on your attachments so they are with you and the vacuum. Ideas for improvement are much appreciated. May the filth stand no chance

Downloads
24
Likes
2
Rating
0
P

Connector EliFix building set | Spojka stavebnice EliFix

Easy connector for alignment and connection building track set EliFix (compatible with CONNETIX). Material: PLA / PETG Nozzle: 0,4 - 0,6 mm Layer: 0,2 mm

Downloads
23
Likes
0
Rating
0
P
PrintablesJerry

Elifix - Half length track

Half length track for magnetic track tiles. Compatible with MNTL, Picasso Tiles.

Downloads
23
Likes
4
Rating
0
P
PrintablesWavestyle

Belife Cordless Vacuum accessories and pipe holder

If you not only want to store your tips together with the vacuum pipe in the same place. This is a remix of @LucienPicard s holder that only carries the two tips and the pipe has to remain on the vacuum itself. I basically recreated the…

Downloads
22
Likes
2
Rating
0
P

CHIZARO - ReLIFE - WALL ART

CHIZARO - ReLIFE - WALL ART

Downloads
21
Likes
3
Rating
0
P
PrintablesFaasteer

TrueLife electric toothbrush stand, insert for spare heads

Today I finally had time to finish the toothbrush holder project. In the original model, I counted on the inserts to hold the replacement heads firmly in place. So they don't wobble and fall off. Here they are.

Downloads
21
Likes
2
Rating
0
P
PrintablesMichal Fiala

TrueLife NannyCam H32 - holder

Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.

Downloads
20
Likes
1
Rating
0
P
PrintablesMr. Smith

Cupra Leon - Facelift 2025 Magsafe Dock Adapter

Ich habe nach dem letzten Facelift vom Cupra Leon 2025 keine Haftung mehr für meine 2. Magsafe Stativ im Auto. Daher habe die Halterung in Höhe und Fläche umgeformt. Damit der Halt wieder möglich ist. Ich habe als Klebeband eine…

Downloads
20
Likes
1
Rating
0
P
Printablesmullerpetr

TrueLife NannyCam R3 Smart Holder

I needed a holder for babysitting camera. Mount to bedframe profile 22,5 x 52 mm. For other mounting dimensions, part 3 and 4 need to be redesigned (if interested, you can PM me). For complete installation, you need: original mount…

Downloads
20
Likes
1
Rating
0
P
PrintablesRadzia30

nissan x-trail t32 facelift

sample model for fans nissan x-trai t32 after 2018 year

Downloads
20
Likes
2
Rating
0
P
Printablestech_bart

Hexagonal anti-reflection ARD ASG Airsoft Gun Optic protection Relife Killflash

Prini infill 20% gyroid Layer 0.16/0.2 mm Work for scope up to 50mm wide Mount on the front of the optics

Downloads
20
Likes
7
Rating
0
P
PrintablesMartin Lacina

TrueLife NannyCam R3

Stand for TrueLife NannyCam R3

Downloads
19
Likes
2
Rating
0
P
PrintablesJerry

EliFix magnetic car track single pillar stand

Single pillar stand for magnetic tiles on a first level. Compatible with MNTL, Picasso Tiles and others.

Downloads
18
Likes
5
Rating
0
P
PrintablesOVERLORDsvk

Truelife Toothbrush Holder

Truelife Toothbrush Holder for 2, glue to wall (VHB tape or other) Printed in 2 colors for nice accent. Use PETG or ASA/ABS (as it is in contact with water/moisture)

Downloads
17
Likes
2
Rating
0
P
Printablesefka88

BMW E39 Facelift Fog Light Mounting Point Repair Bracket

Replaces the integrated plastic tab that commonly shears off, allowing the fog light to be secured without replacing the entire bumper. The bracket replicates the factory slot geometry. Once bonded, the fog light housing slides into the…

Downloads
17
Likes
5
Rating
0
P
PrintablesJosef Novotný

Holder for nanny TrueLife NannyTone VM3

Simple holder for TrueLife NannyTone VM3. You can fasten it to your crib or bed using printed bolt. All you need to do is to insert two M3 nuts into sockets at bottom of holder and attach bottom part using two M3x10 screws .

Downloads
17
Likes
0
Rating
0
P
PrintablesPavel Novák

Column ELIFIX magnetic

Design Concept It is spare part of ELIFIX column. It is designed to enhance magnetic construction toys, offering versatility and durability in building projects. Use This column serves as a structural support for larger magnetic…

Downloads
16
Likes
0
Rating
0
P
PrintablesLuke96

Toothbrush stand Truelife junior

Toothbrush stand Truelife junior

Downloads
16
Likes
1
Rating
0
P
PrintablesOndraŠ

TrueLife camera holder

Fits most cots. Alternatively, just adjust the width of the holder. It is only necessary to maintain the size and offset

Downloads
16
Likes
1
Rating
0
P
PrintablesMichal Rosada

Volvo XC90 (Gen 1 Facelift) Keychain 3D Printable

This is a thick-line silhouette model of the first-generation Volvo XC90 (facelifted version, ~2007), designed for 3D printing as a keychain or decorative item. The outline was created with bold geometry, perfect for clean results even…

Downloads
15
Likes
0
Rating
0
P
PrintablesPandaStudio

inspired by Skoda Karoq (facelift) - keychain

Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…

Downloads
15
Likes
3
Rating
5
P
PrintablesIvo

TrueLife H32 pro nanny cam holder (for magnets)

Safe holder based on screwing mechanism. Designed for 5 x 2 magnets. PETG with 0.2mm used

Downloads
13
Likes
2
Rating
0
P
PrintablesCukiJ

TrueLife NannyCam - Stroller holder

Download and print .3mf/.gcode file with recommended supports and settings (with stop for inserting the nuts). Or Use holder body from original model (https://www.printables.com/model/549840-truelife-nannycam-h32-holder), and print .stl…

Downloads
12
Likes
2
Rating
0
P
PrintablesMiroslav Matyas

Truelife toothbrush holder v2

Standard print on PLA, holder glued to the wall.

Downloads
11
Likes
3
Rating
0
P
PrintablesArthur Takács

TrueLife SonicBrush Toothbrush Holder

Holder for your toothbrush.

Downloads
11
Likes
0
Rating
0
P
PrintablesiPa64

Holder for Relife RL-068 mini polish pen

To hold your mini polish pen Include f3d and step files

Downloads
11
Likes
1
Rating
0
P
PrintablesPandaStudio

inspired by Audi A1 (gen. 8X facelift) - keychain

Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…

Downloads
10
Likes
1
Rating
0
P
Printableschars

Base para Relife RL-068B

Base para Base para Relife RL-068B. impresión en material PLA perfil de impresión normal 0.2mm relleno 10% tiempo de impresión aproximado 36 minutos. 4g 1.44m de uso de filamento aproximado. recomendación impresión vertical

Downloads
10
Likes
0
Rating
0
P
PrintablesMr. Smith

Cupra Leon - Facelift 2025 ESP Abdeckung

Nachdem der Hersteller (Cupra 2025) beim Facelift auf die Idee kam den Start / Stop Knopf von der Mittelkonsole ins Lenkrad zu verlegen haben ich den ESP Knopf immer aus versehen betätigt. Daher habe ich eine Abdeckung des ESP Knopf dafür…

Downloads
9
Likes
2
Rating
0
P
PrintablesYeet

TrueLife toothbrush holder

Designed for TrueLife Clean70 toothbrush but probably fits others as well. Print with tree supports.

Downloads
9
Likes
0
Rating
0
P
PrintablesSocom2

Truelife SonicBrush Clean30 Duo single toothbrush charger

it was annoying to always have to charge it without a stand so i just made a stand with a hole for a charger

Downloads
9
Likes
0
Rating
0

TrueLife SonicBrush holder

Wall-mounted TrueLife SonicBrush Compact holder.

Downloads
9
Likes
0
Rating
0
P
Printablesanthan.cz

Car holder - TrueLife Nannycam

TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…

Downloads
9
Likes
1
Rating
0
P
PrintablesDžejkoob

Parking Sensor Cap – Škoda Octavia II RS (Pre-Facelift)

Parking sensor cap for the front bumper of Škoda Octavia II RS (pre-facelift). Designed as a replacement plug for a missing or removed parking sensor. Ideal for bumper modifications or when using aftermarket sensors. Fits flush into the…

Downloads
9
Likes
0
Rating
0
P
Printablesnick_hbg

Elif hanger desk

Needed to hang one acoustic board while having one mounted to the top part of the desk. THis makes it possible to use th

Downloads
9
Likes
1
Rating
0
P
PrintablesSanman

Print head cable relif with integral clip

Great original build, however mine kept on leaning backwards. I just added on a clip to keep it from doing so. I see that someone else had the same problem and made a clip for it. Wish i had seen that before i redesigned and reprinted…

Downloads
9
Likes
0
Rating
0