455 models
Print out of heat resistent and foodsafe material if you use hot ingredients.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant
0.1 layer height, 25% infill, 55 mm/s, support: not necessary.
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
More photos to come once I have printed and assembled the model.
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This is a stand for a single Fussy style deodorant case. Minimal on-bed supports and a brim advised. Prints great with PLA, and PLA CF.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Printed in PLA with variable layer height. Happy Printing!
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Simply slide in a 10x2mm neodymium magnet in the pocket (no glue needed) and glue other 10x2mm magnet to the surface of door etc. I use mine to keep door closed against foam for extra sound proofing my printer in diy enclosure made of…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Simple magnet holder for my magnets. I've added numbers in slicer. It is quite big but magnets can still jump on their own XD It is 80mm wide and 85mm tall.
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
Geodesky slouží jako pomocný nástroj žákům 1. a 2. třídy ZŠ. Učitel zadá geometrický tvar a děti s pomocí gumiček jej vytvarují v geodesce.
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
Geodeska nebo geoboard je pomůcka k výuce matematiky. Na desce tohoto kruhového typu je možné s pomocí gumiček nastavovat například různé úhly, tvary obrazců, případně časové údaje.
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
VERY IMPORTANT NOTE This is not a simple print, assemble and enjoy project. It requires quite some experience, basic knowledge in electronics, a good amount of patience and probably some nerves (it's worth it!). I'll try to give you as…
This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…
https://youtu.be/PR1VPX4kCZE Inspired by geodesic domes this lamp shade is dual extruded in translucent PLA and dark colored PLA. The wireframe structure protects a thin shelled transparent core and fuses together at the top. Two…
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
This is for standard size popsicle sticks which I measured to be 113mm x 9.5mm x 2mm. Print a single hub to test the fit of your popsicle sticks and adjust the XY Size Compensation until the stick is snug, but not too difficult to fully…
0.2mm layers 10% infill Only the bottom part near the bed surface needs some support.
My take on the latest trend in 3D printing. Does require supports to print properly. Not the prettiest sample print (used really old wood PLA) but it prints beautifully otherwise. Remixed from https://www.thingiverse.com/thing:5162278 and…
A mock up of King Theoden's helmet from the Lord of the Rings. Now you too can defend Helm's Deep. (Not to be used in actual combat)
My son got a National Geographic Geode Kit . It only came with 3 display stands but the kit contains many more geodes to show off. I replicated the included display stand in the kit using TinkerCAD and also made a version with a round…
Das “mini Geodesic Dome Gewächshaus” wurde während eines Twitch Streams entworfen, modelliert und aufgebaut. Die Segmente werden mit Hilfe von Rahmen mit PE-Folie bespannt. Danach werden die einzelnen Segmente zusammengesetzt und mit…
Hi Ty Tou, I will as time permits and I gain confidence to improve these files further redo all the HALO files. So heres a start and if you need it cut up to print and or adjusted in any way that helps let me know and I'll try my best,…
This compact deodorant container is designed for convenience and portability. Perfect for fitting into small spaces like pockets, purses, or travel kits.
Prints without support. Scale to the desired size in slicer Category: Outdoor & Garden
A fully printed 3V Geodesic Dome approximately 40cm diameter. Colour coded for ease of assembly. Please note the orientation of Joiner B (Colour: Blue) which has an arrow geometry designed in the joiner/connector. The installation of the…
Set of fixations to build a geodesic dome (aka 2V Icosahedron Dome) human sized. BOM : 5-way fixation x16 6-way fixation x10 fixation x120 Wood screw M5x100 x120 Wood laths or tubes (dimensions depend on your wish) Fixations are clipsable…
Give your closet some serious attitude with the Geohanger , a hilarious 3D printed clothes hanger modeled after a tough, muscular character with clenched fists and a grumpy face! Inspired by classic rock creatures, this stylized hanger is…
(Updated February 2022 with several improvements and simplifications thanks to .benjamin. ) While using Jamie_K's geodesic icosahedral sphere in OpenSCAD, I ran into some issues: A sphere based on an icosahedron doesn't have an equator,…
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
Inspired by another Deo holder I made my own version. Fits Nivea 39mm. MY TEST PRINT WAS MADE AT 101% ALL AXIS. I included a small hole that almost goes through the entire base if somebody maybe want to weight it down with a small metal…
This is a fully articulated Geodude toy based on the game Pokemon Quest. You will need to use TPU filament for the two shoulder joints and two elbow joints. You will need to glue in the eyes and the mouth to ensure they hold. Use a black…
A model of the U.S. Navy Explosive Ordnance Disposal (EOD) insignia. A simplified version with reduced detail is included and recommended if scaling the model down to print. Photograph printed in Overture Silk PLA.
Social Media: https://linktr.ee/storknestprojects Components: about 100 threaded rods - M10 about 300 nuts - M10 about 10 wooden panel boards a roll of 30m x 1,5m greenhouse foil 7 rolls of greenhouse tape (8cm x 15m) Updates: 06.04.2023…
Simplified yet dimensionally accurate 3D models for 5-way and 6-way geodesic dome hubs and ball connectors designed and supplied by hubsTM. These models are also downloadable through their website;…
Additional triangles used to change the door shape so that there is no bottom lip. Instead, replacing some of the bottom panels will make a more door shaped entry. After taking out one of the hexagons for the door, you can also replace…
Assemble hexagons and pentagons from a flexible structure to form a three-dimensional geodesic ball. I arranged the hexagons and pentagons so that the entire structure fits on your print bed in one go . The additional 15 clips you’ll need…
This is a combination of a few existing models. The original design from Abby575 was remixed by Chris_m48 and DeanR96 . I liked the shape and fit of the panels that DeanR96 remixed but wanted to use the ‘window’ design by Chris_m48 so I…
Replacement drive for the Mr. Baddeley Mark III Drive. Uses RevRobotics NEO motors and the Max Planetary 20:1 gearbox with SparkMax brushless motor controllers. See README for the parts list. Uses powerful NEO motors paired with the 20:1…
This model is featured in figure 4.5 of Visualizing Mathematics with 3D Printing . Category: Math
2 x 1 gridfinity holder for deodorant, accomadating up to a 67 mm width. Remix of @Dominate4life model adding bevled edges. Printed .20 layer heigh with 8% infill.
When additional strength is required; for example, locations with high winds, or covered domes that could experience more than 20cm of snow, these new hub designs will help along with the installation of additional secure caps and ridged…
Remixed from: https://www.thingiverse.com/thing:4978318 Original description from Thingiverse: Wellll... I tried about 10 times across 2 different printers and 3 different types of bed to get this thing to work, but the small little…
Planter based on a small hexagonal hexecontahedron. Prints without support, just scale to the desired size in slicer. There's a hanging version too: https://www.thingiverse.com/thing:4776337 This came up as a little side project while…
Remix of the nice LTT Cable Management Clips. New: With enclosed NeoDym magnets. Thanks for this great design. Especially your aspect looks abslutely nice. I did not want to have the magnets exposed to run risk of falling out or messing…
About the Design I wanted a large pot that I could print on my Prusa Mini+ and worked with my self-watering insert that this is remixed from. I love printing 2 tone planters as it makes it easy to create many unique variations and is very…
Printing the base For best results, print the top of the base upside down (on its largest face), and the mug flat on its largest face. The bottom base can be printed with or without supports - it has two arms and a hole designed to fit a…
Das "Einfache Geodesic Dome Modell" wurde während eines Twitch Streams für den Einsatz als Projekt für Messebesucher entworfen. Es werden zwei Arten von Steckverbindern 3D-gedruckt, die mit Hilfe von unterschiedlich langen Holzspießen…
This design is based on a chapstick tube, but in XXL scale, that could be used for deodorant. In order for the screw to hold I inserted a very slender knitting needle for strength.
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
I have two variants, one that is true to the original but needs soldering and rerouting of the cables. And another one which should allow for the cables to be passed through without soldering. However you need to remove the old piece…
Magnets in the shape of the iconic horseshoe magnet. Neodymium magnets are inserted during the print. I have two versions here, one for Diam.6mm x Height 8mm magnets, the other for Diam.5mm x Height 2mm. The 3mf files are all set with the…
Inspired by Bogdan Isopescu's clever solution https://www.kickstarter.com/projects/25645348/geo-the-geodesic-dome-connector I'm experimenting with printing the bottom part of the piece with flexible filament (TPU) and then print the upper…
Here is a simple digging knife that is pointy enough to break up dirt, but sturdy enough to not snap immediately. Great for uncovering and finding buried items of all shapes and sizes. Most of all, it looks cool. Printing Instructions:…
Perfect fit for Neodymium 12x2mm magnets https://www.amazon.es/gp/product/B008U9SDI4 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Animals
Bust of Theodore Roosevelt by TowerCG . Originally uploaded to Blend Swap .
Set of connector hubs for creation 2 frequency geodesic dome yurt. I designed it as a shelter for my daughter, (yeah I could use couple of chairs and blanket but I wanted to try something new :) ) Dome is usable also as a small foil…
A geode bowl created from the supports of the print. Print the bowl and then remove the bowl from the supports. The support structure create a beautiful geode bowl. I have included the .3mf for the Prusa MK3S and the stl for you to create…
Holds a normal stick of deodorant in a 1x2 gridfinity form factor. The hole is 31mm x 65.5mm, a cylinder is cut out down the middle that's 16mm in diameter
Geodesic sphere for OpenSCAD, intended to be a drop-in replacement for sphere() for those cases when you want uniformly spaced facets that don't bunch up at the poles. Respects parameters "r" or "d" just like built-in sphere(), and also…
This is a model of Theodore/your neighbor from Hello Neighbor! I recommend printing at a scale of 200.
Three new remixes for Panel 1 of the Geodesic Dome Cat House . Enjoy! Please see the original design for other panels and schematics.
(Deutscher Text: Siehe unten...) Do you know those deodorant bottles with a spherical cap? They are a perfect example for form not following function! Having them upright is a terrible waste of time in the morning, especially when they're…
I had the printed using HP-MJF for the black one and SLS for the white one. Made with a very configurable grasshopper script.
a complete geodesic dome. print as in picture so no supports or raft. but i used a brim with 1 skirt layer and 5 skirl outlines. to help keep it stable. it dont think i even needed a skirt/brim. it just looked so vulnerable. i used 10%…
Remixed from: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson https://www.thingiverse.com/thing:205699 Size: 138 x 62 x 42 If you would like to support my work or have access to all of my files you can…
These are the files used for my Geodesic Dome ISRU project. This workshop was led by Tom Sachs and the MIT Architecture department. Please see the following video for context: https://www.youtube.com/watch?v=iD66RMtS0Sk&feature=youtu.be…
It's a Model of those things you find at parks. This is probably a torture test.
These connectors are designed to fit 5mm bamboo skewers. These are for building a geodesic dome. Print instructions Unassociated tags: bamboo dome, dome connector, dome connectors, geodesic connectors Category: Toys & Games
A small Geodesic Dome with 18cm diameter as a greenhouse for a micro garden or other cover. There is additionally also a variant from the frame without walls. The closed variant has a "print in place" flap on the roof. The models are…
Gridfinity bin to hold a deodorant stick. The bin occupies 2x4 grids, and is 2 units tall.
Customizable Geodesic Kitchen Sink Drain Strainer
I designed these shoe deodorizers for my sons basketball shoes. They were modeled in Fusion 360. They are filled with silica gel (aka - crystal kitty litter), which can be dumped and replaced when it's no longer effective. Printed with a…
Note : this is not technically a geodesic dome, but I'm not sure what to call the geometry. Face-centered cubic just doesn't have the same ring to it? Materials PVC Pipe: I bought 10x 10' lengths. PETG: Printed out of 1-3kg (honestly…
This protective cover for set squares offers reliable protection against scratches and breakage. It ensures that your set square remains in excellent condition. Ideal for school or office, the cover shields your set square from everyday…
Ever had your Nivea deodorant dry out, keep it inverted in these stylish holders.
Example For a dome with a diameter of 90 cm (as in the cover picture; banana for scale), you benefit from essentially only two strut lengths (92,5 and 81 mm), and you can also use standard 20 cm bamboo sticks ( reference ) with minimal…
A fun hex egg for easter. Two sizes. 100 and 60 mm tall
This “Geodreieck” is a common tool used in school K-12 and they are getting so expensive so that I just started 3D printing them. The result is a dual-color triangle with important markings being highlighted. HOW TO PRINT Download the…
Very decorative! I used PLA, and you realy need brim, otherwise the print will probably fail (tested for you). If you dont like the brim on the lampshade itself, you can either trim or cut it all off. Personally I just cut the floral…
Videodrome - Nikki Brand (Debbie Harry) 1983 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Printed for Ping Pong Balls and Gardena Microdrip may be any other 3/16" or 4.6mm tube. You need 92 LEDS and PingPong Balls for hole sphere. 12 Parts 5 Arms with 16,5mm Gardena Tube Slices and 80 Parts 6 Arms with 27.5mm Tubes. You can…
This geodesic dome, 8.5" / 216 mm in diameter, was made from linkage plates (t-beams) printed on a MK3S (six at a time) using PETG filament. I have supplied STL files for you to slice as you choose. Print instructions This geodesic dome,…
A small case with a lid that holds up to three refills of Wild deodorant.
Gridfinity Deodorant Stand - Simple
A simple stand for a geode. Sized for an 85mm dimension stone. I recently went on a trip to Utah and cracked open a geode on my trip as a keepsake, so I wanted to 3d printed a little stand for it. None of the other geode stand designs…
This model was created for the self-watering planter insert I designed. I am trying various pot designs that bring out the joy of 3D printing. I use 1.5mm print walls in my design to save on filament but also have enough layering usually…
A gridfinity bin to hold deodorant in an efficient upright position. Dimensions of main slot: 30mm x 155mm Configuration: 1U x 3U base, 6U tall Bin based on Gridfinity by Zack Freedman and designed with Fusion 360's GridfinityGenerator .
these hubs can let you construct a geodesic dome with 1/2 inch rod such as pvc or wood etc. for the struts. this works because the hubs will bend allowing the end to match up. with the 3p hubs you will only need 1 size strut. with the 5p…
Earlier posted "Rotary Magnet Dispenser" had a magnet gauge to determe the magnet thickness. Reworked better version! As my "Rotary Magnet Dispenser" consists of different pieces (30° and 45°) "cake" segments, because of tolerances and…
80 facets of Neopixel joy! Inspired by https://www.prusaprinters.org/prints/40182-geodesick-rgb-led-spheres but designed completely from scratch to use a more consistent way of assembling the facets together. Additional components…
The cap design of Niveao deodorant roll-ons does not allow the roller to be placed upside down. Using this simple holder, you can flip the deodorant and get every last drop out. This print does not have any strong loads or high…
