The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
- Downloads
- 49,247
- Likes
- 12,541
- Rating
- 4.75
4,822 models
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Print approx. €87.94–€107.49 excl. taxPreliminary estimate for one variant
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
Print approx. €6.23–€7.62 excl. taxPreliminary estimate for one variant
🔵 Flexible Caterpillar 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/channel/UCn-fQH2--PRf4VltMLOjYcw ■ Video 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print approx. €9.33–€11.41 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for one variant
Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).
Print approx. €16.13–€19.72 excl. taxPreliminary estimate for one variant
CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector. This clip supports a…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3d printed, radio controlled bulldozer. It is about 200 hours of printing time, zillions of screws, bearings and so on. It has 2 motors, one for each track. And, it has 2 servos lifting the blade up and down. The whole project…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Create long-lasting flames with this waterproof firestarter! Flames last 10+ minutes, even in the rain! No plastic is burned for this model - instead, the mold is used to create a waterproof wax and dryer-lint (or sawdust, paper, etc)…
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
This is an extended form of the known loud whistle, now with handle for a band and a print in place triller ball inside. You can/must losen the triller sphere in the inside with a little gentle force. Settings Value Infill 40% (adaptive…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Liverpool.
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
The original file takes 36 hours to print. This only takes 6 hrs. .1 layer height .6mm nozzle You can modify the .3mf file if you have a .4 nozzle.
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Scaled down to match 1:220 from: https://www.thingiverse.com/thing:1621482
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
es una serpiente articulada (juguetes)
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for PETGSource material: PET
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Printed sliced in half, then a touch of super glue. Edited from: https://www.thingiverse.com/thing:2378227/files
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Woah, s***. So Mi…? That you? Barely recognized ya with all that chrome on your cranium, damn. You’re, like, properly decked out now. I mean, s***, you look like a legit netrunner. So, you, like, taking on proper gigs now? Pullin’ in some…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
Hides away by snapping directly into any 3030 channel, on both the Mini and MK3 series. Useful if you do frequent nozzle swaps. Tested and working, good offset for the distance for first layer calibration for the SuperPINDA specifically,…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for PETGSource material: PET
flower pot with leaves design dimensions: diameter 100mm height 100mm
Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant
This is a mounting plate that fits into the Jung LS 990 system. The fingerprint sensor R502-F (waterproof) can be inserted from behind and fixed with the clamp. The connection should be positioned downwards. The whole fits onto the Jung…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
" Blossom " embodies the quintessence of spring, a symbol of renewal and the ephemeral nature of life's most beautiful moments. As trees shake off the remnants of winter, their branches burgeon with delicate blossoms, transforming the…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
I was looking for something smaller for mounting the superpinda. Lower screw threads into the plastic. If you use a longer screw it can steer on the lower hole of the fan.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
printed with paint on supports, set by angle.
Print approx. €28.91–€35.34 excl. taxPreliminary estimate for PETGSource material: PET
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for PETGSource material: PET
A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…
Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant
I designed the electronics case for the Arduino fingerprint reader project in order to facilitate conducting experiments and ease of connection, verification and modification, and not for final use by the user in order to facilitate…
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Tamperproof Seal. Simple and Fast to print.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I designed this template for my mother, who had previously made the template out of cardboard. "Marketing on" You love calligraphy and want to bring your penmanship to a new level? Then this DIN A5 stencil is just right for you! This…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Alternative Stand for Martins Enterprise C model https://www.printables.com/model/593310-enterprise-c-ambassador-class
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Print approx. €6.79–€8.30 excl. taxPreliminary estimate for one variant
Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Durable, kid-friendly, and perfect for any desktop or nightstand, this 3D printed piggy bank is a unique gift that will provide enjoyment while helping develop good financial habits. Its cute prints will look great displayed together in a…
Print approx. €15.38–€18.80 excl. taxPreliminary estimate for one variant
Wall art of Cockerpoo dog Adjust size as required
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Step Datei anbei um die Datei abzuändern.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Simple Flowerpot which can be printed bicolour or multicolour. The gcode has the filament change instructions (M600) already built in. If you slice it by yourself, you must add M600 commands at the preferred layer. E.g. I have used for a…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET
This was printed in .04mm PLA .20mm layers 15% infill but also adjusted the horizontal shells bottom to be 5 printed with brim to prevent warping. large sleeves used:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Perfect for cactusses or succulents, with a hole in the middle for watering. 3 sizes, the diameter of the bottom of the pot is written in the name of the file.
Print approx. €14.19–€17.35 excl. taxPreliminary estimate for one variant
No MMU required. Some M600 Filaint Change instructions in gcode. Diameter is 140 mm, you can scale it in the slicer. If you slice it by yourself, necessary change filament instructions (M600) must be added at the preferred layer. See also…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
Superplasma Kask Helmet was missing a circular clip that holds the straps down to the helmet. Printed this in Overture PLA with 15% infill. Recommend using a skirt/brim as it was knocked over the first time I tried to print it.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
I also added the fully armatured and coloured .blend file, if you want to use the model for something different. Update: I also added a mini Version with a base for table top games If you love this design and want to see more fun projects…
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
CATerpilar keychain MMU, print with MMU3
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Great serpent (Dragon) (two colours) 20 cm - fan, matrix for graphics or for frottage If you use it as fan, you may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important:…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Needed a way to store SAS drives. I printed this in PLA, .4 nozzle. Updated added STL file.
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
Jesle na seno pro klec typu Ferplast Arena, kdy je nutné, aby měl zavěšení odskočené.
Print approx. €14.29–€17.47 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign reminiscent of the classic Blinkenlights text. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
I used .28 layer height with standard Cura settings, just the speed set to 60. In the .stl file I used CHEP`s fast profile for Cura, it takes 7 hours to print.
Print approx. €9.33–€11.40 excl. taxPreliminary estimate for one variant
Flowerpot cover with a hanger for hanging on two screws. Printing in vase mode.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Superpinda near hotend for voron afterburner, stealthburner.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Print in 2 colors. From the bottom it is navy blue and the top is yellow
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
This STL file provides a replacement wall mount designed to match the original dimensions of the waterproof shower phone holder, model B09PRCJ1W8. Over time, the adhesive backing of the original mount may lose its grip, especially in…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
The official font for number plates in Germany is FE-Schrift. See attached pdf file for details how to change the text in Fusion 360
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
This is 3D printable model of the Constitution Class NCC-1701 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. The ship is a hybrid of TOS and SNW…
Here is my take on a catch all / centerpiece / snack bowl! Use it for keys, snacks, TV remotes…morning cereal? I don't judge. Three versions available: 1 Compartment, 2 compartments, and 3 comparments. Check out my other designs too! Coda…
Update 8-26-2019: I have reprinted the USS in Polyalchemy Elixer Silver PLA As the previous one I printed I gave to my supervisor I have also added Printable inlays for the base to make the lettering and emblem pop. This is my rendition…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
NO-AI (HUMAN MADE) The details are deep so you can color them easily (apply a base color, then a very wet shading blend to fill in the etched details). Personal use only. Do not redistribute! It is absolutely not possible to download this…
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
Derpy is a friendly yet slightly scary character from the movie KPop Demon Hunters. It is a big feline with blue fur and big yellow eyes. He seems to be obsessed with turning objects back in place when they get knocked down. Designed on…
This is 3D printable model of the Galaxy Class NCC-1701-D Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles and some details need to be separated into…
The final... final frontier! The 5th generation 1701-Series Starship Enterprise from the show Star Trek: The Next Generation, now available to hang proudly from trees and light fixtures along side its older sister ship! Engage! Find TOS's…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
Space: the final frontier. These are the voyages of the Starship Enterprise. Its five-year mission: to explore strange new worlds. To seek out new life and new civilizations. To boldly go where no man has gone before! First of the…
Articulated caterpillar I'm currently having fun modeling articulated joints. I've seen different types of caterpillars on this site with different joints, here I used mine. You can zoom in or out of the model by 25%, it shouldn't affect…
This is 3D printable model of the Neo Constitution Class NCC-1701-G Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. If you prefer this ship with its original name and registry of…
CHECK OUT THE NEWLY RELEASED ARCHITECTURAL PLANTER COLLECTION ! Turn mythology into living art with the Medusa Planter , a statement piece that merges classical sculpture with natural beauty. Inspired by the legendary Gorgon, this planter…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Modificación de el muslo abdomen y pecho del modelo DUMMY 13
NOTE! I have made a remix of this design, incorporating fixes and new features. You can find the new model here: https://www.printables.com/model/649321-universal-drilling-jig-for-perpendicular-drilling…
This is 3D printable model of the Constitution Refit NCC-1701-A Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. Pieces of the necelles need to be…
This is 3D printable model of the Sovereing Class NCC-1701-E Enterprise from the Star Trek. It is a kit. Apart from the thrusters, which have to be glued in place, there is no further need for any glue and the model could be assembled as…
This is 3D printable model of the NX Class NX-01 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing but some painting is still required. For the…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
This was my entry for the MakerWorld Animal Frenzy contest. Update 2424-06-10 Version 3 of the crank handle has been uploaded. It's available as an handle_v3.stl under files for now, but I'll update the print profile when I get home. The…
Bring a futuristic touch to your desk with the Cyberpunk Phone Stand. Designed with bold geometric lines and mechanical details, this stand reflects the raw aesthetic of cyberpunk culture. It is both practical and stylish, making it…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Create your own version of the Enterprise D Conference Lounge - on your refrigerator! UPDATED to now include Enterprise F and G from Picard Season 3, and to go along with the aircraft carrier, I’ve added the NASA STS Orbiter. I’ve remixed…
Spiderschwein und Homer von Simpsons - Der Film. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 15% Material: PLA Brand: Eono Color: schwarz printed on Artillery Sidewinder X1
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…