ESP32CAM module holder for tilt pan module R.1
ESP32CAM module holder for tilt and pan servos. This is a replacementfor the top portion of the clasic tilt-pan module.
- Downloads
- 98
- Likes
- 9
- Rating
- 0
72 models
ESP32CAM module holder for tilt and pan servos. This is a replacementfor the top portion of the clasic tilt-pan module.
Name: Somebody School: TBA Hub: TBA Our Process blah, blah, blah Design Summary blah, blah, specifications, We added two pin-holes for accessing the internal reset button because there are differing models of the ESP32CAM board that have…
I used the great work form Kubol https://www.thingiverse.com/thing:2086578 to make a tutorial for the german Make Magazin where I put a ESP32-Cam into it and use the face recognition to make actions (like opening a door or just light up…
I made this model looking at what others have made but adjusting to my needs, (didnt remix any other model in this, made all from scratch). I needed a strong and secure casing for my ESP32Cam with USB module, that would acomodate the…
Printed with Prusament PETG Jetblack 0.2mm supports are required.
The ESP32CAM from Michal Fanta looks good, but it works with GoPro-Adapter. So I made a Adapter for the Articulation Camera-System in FreeCAD. Made with PETG: Orange Black Layer 0.2mm Infill 15% Geradlinig Support: Gitternetz (*) (*)…
This is a modular mount and holder for an ESP32Cam for an Ender 3. The box is designed to fit an ESP32Cam, connected to an USB to DIP connector (for powering the ESP32Cam) that is sitting on the lid. The mount itself is clipped to the…
Simple and sturdy ESP32Cam Pan and Tilt Housing. This design features a built-in bracket for a wifi antenna, and allows for pan and tilt giving you the ability to adjust the camera's angle freely. It can be wall using either Tessa or…
Here's a case for an ESP32cam, plus a bracket I had designed for my specific use-case; which in this instance was for monitoring my water meter. The case is very snug, so installing your ESP32CAM into it can be a bit tricky. The photos…
Esp32Cam Télescope Adapter Pour pouvoir connecter votre camera ESP32 sur un télescope au coulant 1,25"
The solution consists of an ESP32-Cam flashed with Tasmota. A good description of how this works can be found here: https://cgomesu.com/blog/Esp32cam-tasmota-webcam-server/ To upload the MJPEG images from the camera to Prusa Connect, I…
A mount for the ESP32-CAM module case thing:6295703 that slides onto the Y rail tensioner. 12-5-23: added design for SV07+ based on feedback from a maker -thanks! Note: use this camera screw adapter (1/4" 20 tpi) if you have a web cam…
This is a combination of features from several prior works. Allows mounting a ESP32-Cam to the X-Axis of a Prusa MK4. Camera angle can be adjusted and fixed with thumb screws. Cables can be routed along the bottom of the arm and secured…
After a year of experimenting and testing, I’ve finally found the best spot to mount a camera on the Prusa MK4. Whether you’re using a Raspberry Pi with its associated camera or an ESP32CAM, you’re going to love the enhancements I’ve…
This project is made for you if you're looking for: A minimal support size for MK4 of the ESP32Cam Modular articulation for custom vertical positioning I've been able to do the support and reusing other projects: A wheel of articulation:…
Komplett druckbares Modell für ein Mini-Stativ für eine Esp32Cam mit Antenne. Für das Gehäuse möglichst kein PLA verwenden, da das Kameramodul recht warm werden kann. Ich habe es in PETG gedruckt. Das CAM-Modul ist nicht einfach…
The software that you need on the camera to recognize the count, may you install very easy with crome (ff is not working) on this site: https://jomjol.github.io/AI-on-the-edge-device/index.html
BambuLab P1P+ESP32CAM surveillance camera
printed at 99% scaled size to create tight fit on the ESP32-CAM Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for…
ESP32-CAM Case with Articulated Mount: Securely holds the ESP32-CAM in various positions with a flexible, articulated mount for easy adjustments. Designed with precision cutouts for USB port.
Wall mount for ESP32Cam Case. The other parts are from the following Creators: Case Bottom by @F3Drid_3409 https://www.printables.com/de/model/971421-esp32-camera-case-antenna-sidemount Case Top ("esp32_cam_case_top_part.stl") by…
I was not satisfied with my previous solution, which I offer for download in https://www.printables.com/de/model/258923 and https://www.printables.com/de/model/258924. My problem is that I often cover my 3D printer with a tarpaulin to…
the ESP32CAM is very popular, but I found a version with the CH340 and micro usb port included, so with this version no need to battery shield. this PCB is a little bit longer than the stadard one, so I had to create a new design to match…
Just an another ESP32CAM case with the tripod vertical and horizontal case holders. The tripod base used is from the @mildjord tripod https://www.printables.com/model/258130-phone-tripod-with-squeeze-mechanism. The 3mf file includes all…
esp32cam with usb power box with gopro like attach
Universal ESP32-CAM Case and Stand holder with wide lens compatibility. More holes for good ESP32 ventilation. Screws are M3, 6 or 8 mm length. Made for ESP32CAM with ESP32-CAM-MB tinker board. Printed using PLA.
Speficication ESP32 Camera Camera Module + ESP32 Printing PETG/ABS/ASA 50mm/s Printing Speed 40% Fan 0.4mm Retraction Lenght 0.5 Z hop when retracting 150mm/s Travel Speed
The camera packaging element has a handle to mount the arm
3d printed housing for ESP32CAM (AI Thinker) with CH340 Interface board.
Simple case for AI on the edge watermeter using ESP32Cam. See documentation . I fixed the baseplate with double-sided tape on top of the watermeter.
I purchased a better but bigger cam that the stock, so I need to do a bigger window for. Not beautiful but useful.
Dies ist mein Halter für die ESP32Cam Gedruckt in PLA . Es werden Messing Einpress Muttern M3 4 STK benötigt
I used this camera box: https://www.prusaprinters.org/cs/prints/110323-esp32-cam-housing Bolts and nuts M5/20 Prusa Orange + Prusa Black
Inspired by rPI camera mount projects, this one mounts an esp32Cam and usb socket, dimmable led under the X-axis motor. Wiring back to Rpi 5v power bus and gpio controller relay for OctoPi controlled light switch via Enclosure plugin.…
Please also note my new solution: https://www.printables.com/de/model/353611-openscad-clamp-esp32cam-to-anycubic-vyper ---------------------------------------------------------------------------------------------------- Changes: move the…
GoPro Compatible Box for the ESP32Cam. It Clips together due to the design of the bottom Part. Its just a minor adjustment to this Model by phantase : https://www.thingiverse.com/thing:4363115 Print Settings Rafts: No Supports: No…
just a fast modification from aqab0Ns ESP32 Cam Case
This is a Fisheye Camera Case from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this camera lying around. The ESP32 Fisheye Cameras / Lenses contains a IR-Filter, so they won't work in night vision. You…
Open, simple and universal ESP32-CAM holder with wide lens compatibility and open for good ventilation so ESP32 temperature gets lower. Fits X motor on Z axis on Prusa Mini Plus. Just click your ESP32CAM in. Made for ESP32CAM with…
Remix for use with my https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam I use with https://www.printables.com/fr/model/164263-remix-of-action-camera-mount-for-mini/comments on my Prusa Mini
A simple small enclosure for an ESP32Cam with tripod mount. It has no opening or room for the SD-Card as i don't use one. The light can only be used as an indicator because the enclosure has just a little hole for it. The position and…
English Version ESP32-CAM FPV Wi-Fi Rover This model is an FPV rover controlled over Wi-Fi using a smartphone, tablet, or computer. The rover provides a live video stream from the onboard camera while allowing real-time remote driving.…
Mount an esp32 camera module on a "Topas Sonic" water meter to read the value with "AI on the edge" for "Home Assistant"
This is a Fisheye mount from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this camera lying around. The ESP32 Fisheye Cameras / Lenses contains a IR-Filter so they won't work in night vision. You will have…
Remixed to add WIFI antenna that came with my ESP32 cam AI thinker. Also the board can get a little hot so consider printing in PETG or other material with higher temp resistance but PLA works fine if the code lets the cam stream go idle…
The ESP32 and the MB module fits perfect in. You may need to adjust the model to your use case.
Mount for OV2640 Camera module inside chamber For this you need the longer cable OV2640 camera module , at least 75mm. 1xM3x8 1xM3 Nut Use voron PIF Settings when printing OR 45% infull 5 walls 5 top/bottom SUPORTS NEEDED
The aim of this project is to visually and remotely monitor the printing progression, prevent failed prints, and, if necessary, launch a cancel command to stop any potential damage. I remotely control my MK4 Prusa via the PrusaLink…
After trying various webcameras in different positions, I’ve learned that ultra-high definition isn’t necessary. And placing the camera away from the heated bed or toolhead may not capture the most exciting angles, but it’s definitely…
This is a modified version (Remix) of the original ESP32 camera case, specifically designed to mount inside a Coreboxx on the middle top. Its purpose is to monitor your filaments during 3D printing: Print instructions: PLA or PETG 15%…
I made a esp32cam case, with a usb-c socket. Also equipped with a stand that i can thread the power cable through. the back pushes on the perimeter heatsink/shroud of the cpu with a hole for ventilation. I find my esp32 cameras run hot as…
Das Teleobjektiv habe ich vor Jahren bei Ebay gekauft, kann euch dazu leider keine Quelle mehr nennen. Das Gewinde ist ungefähr M18x1 mm. Verwendet ihr andere Objektive, nehmt die STEP-Datei und passt euch das entsprechende Gewinde an.
Corner bracket to replace the standard component from Tukkari in the front left top corner. Elements of the articulated arm can be mounted to the bracket to provide a top down view onto the print bed with the ESP32 camera. The bracket can…
Eine Befestigung für die ESP32Cam, um damit den Zählerstand am Wasserzähler zu erfassen. Elektronik und Programmierung basierend auf: https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation Ich habe die ESPCAM an einem…
USB splitter to be able to connect USB flash disk and power up ESP32CAM in the same time from Prusa MINI
Its just a ~80mm extension for the arm of this model https://www.printables.com/model/424005-esp32-cam-case It has a 0.2mm tolerance on the top part to make it fit without sanding there. Feel free to edit the scad model to remove it or…
Simple yet modular side overview camera case holder for this model ESP32CAM camera Case https://www.printables.com/model/1448850-camera-esp32cam-standalone-case-and-stand-holder Screws are M3x16. Printed using PLA.
ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…
This is a simple closed casing designed to allow mounting an ESP32CAM camera module in a robust and easy way on top of an Axiom Qalcosonic W1 water meter. Can be used for e.g. home automation scenarios, where an OCR or AI software is used…
ESP32Cam Mount to 1" Pipe and Wire Clip.
ESP32cam camera mount with housing for the left side of the Prusa XL printer. It is best to solder the power supply leads for the ESP32cam camera to the 5V and GND pins. The camera gets quite hot, and you can stick a Raspberry Pi heatsink…
The ESP32Cam housings I could find for the Core One were only for the front LEFT corner. I wanted two cameras, ie the front right. This design is “low” enough to fit in the front right hand corner even when the print head is homed…
I made up the ESP32CAM from the Prusa Blog and decided I wanted my own box. It is a very slim model with a joint at the back. Ports for the power cable, an SD card, and both reset buttons are included in the model. Reset is marked with an…
This is a simple closed casing designed to allow mounting an ESP32CAM camera module in a robust and easy way on top of a Landis+Gyr Ultraheat/Ultracold T550 energy meter. Can be used for e.g. home automation scenarios, where an OCR or AI…
Es un soporte para camara ESP32 y agarre a MK4/MK4S
ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…
ESP32cam camera mount with housing for the left side of the Prusa XL printer. It is best to solder the power supply leads for the ESP32cam camera to the 5V and GND pins. The camera gets quite hot, and you can stick a Raspberry Pi heatsink…
English Version ESP32-CAM FPV Wi-Fi Rover This model is an FPV rover controlled over Wi-Fi using a smartphone, tablet, or computer. The rover provides a live video stream from the onboard camera while allowing real-time remote driving.…
I purchased a better but bigger cam that the stock, so I need to do a bigger window for. Not beautiful but useful.