2,987 models
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
EN: Purely functional simple EZ to print hairband, nothing special. CZ: Funkční, jednoduchá čelenka, tiskne se OK.
Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…
3D bust model inspired by Ludwig van Beethoven , carefully sculpted based on classical portraits. The model captures his intense expression and iconic features, with detailed hair and period clothing. Designed for 3D printing, it features…
What is it: It is a super slim case for the Raspberry Pi Pico W microcontroller. The case snaps together. No glue, no fasteners. The no glue part was important because at any point you may want to pop it loose of the case and put it on a…
For completion, you need to glue 4 pieces of magnet cylinder 8mm diameter, height 4mm. The date can be written on the lid. Pro kompletaci je potřeba vlepit 4 kusy magnetu válec 8mm průměr, výška 4mm. Na víko je možné zapsat datum.
Remix of https://www.printables.com/model/321603-ethernet-cable-wall-mount
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
“Can I have a new pen for my Promethean board, I've lost my old one”. If only teachers would look after the lovely equipment IT buy them… This clip is designed to attach a Promethean Pen to a standard lanyard clip, reducing the number of…
Ein einfacher, aber nützlicher Halter für Tablets und Smartphones. Die Konstruktion wurde so gewählt, dass keine Stützen notwendig sind.
This is an experimental device. Use with caution on your own risk. Verify dimensions of the particular device before printing. Manufacturing instructions: Ring: Material: TPU, 40D or other softer flexible filament. 3D Printer: FDM 3D…
A simple post stylized in the form of the flag of the Netherlands. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed…
Auf der Grundlage ( Grundplatte ) von @Muurph_109447 und seinem IKEA Method Holepattern Organizer 70x45x35 brauchte ich noch einen Halter für meine Zangen.
A simple magnetholder for opening secured doors and drawers. Just add a tool change / pause at 11mm (or use the provided gcode) to add the magnet. I bought this Magnetic Cupboard Lock (de: Magnetisches Schrankschloss) on Amazon and used…
Universal Headphone Holder for IKEA Kallax This universal headphone holder is designed for easy mounting on an IKEA Kallax shelf—no screws or tools required! All parts are 3D printed and can be assembled using just a 2 Euro coin. The…
Holder for a gaming headset. Fits perfectly for the standard Ikea table. If you need a different size leave me a comment or change the .scad file. If you want to change it, download the BOSL2 Library and put into a folder named lib .
Used a negative volume box to remove a small section of the original model; I've tested it with an ethernet cable in situ and I can easily get my pinky finger in there to push up on the cable clip. Printed in eSun PLA for my Mini+ as per…
Let me know if you need other size (100mm included)
A simple patch stylized in the form of the flag of the Netherlands. The patch is designed for colour printing in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Mir hat die Farbe nicht gefallen, deshalb habe ich ein eigenes Gehäuse designt. Einfach das alte Gehäuse abklipsen, neues dranstecken und zusammenkleben. Hier habe ich die Fensterdurchführung bezogen:…
I remixed this to fit a GMRS extension RJ45 (CAT5) cable that's routed from the arm rest through the panel...I resized this to fit the smaller port in the bottom, and added two cutouts: pass through for CAT5 Cable for install larger hole…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
Overview An ethereal and light statue that shows love in artish style. I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be…
This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…
Add a practical hanging point to the back of the seat and make better use of the luggage compartment. This 3D-printable fold-out hook provides a convenient place to hang lightweight everyday items such as shopping bags, small accessories…
🇬🇧 Welcome to London! This model was created by Dany Sánchez . The most famous landmark of London and the United Kingdom: the Big Ben . The tower is officially known as Elizabeth Tower, although the nickname Big Ben, which is the main…
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
Ethernet (RJ45) Port Dust Cover cap with grip for easy removal. Just added: New slimmer/narrow model for switches with closely spaced ports. Check out all other port covers: USB-A port cover -…
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This is a full dice set for your tabletop games and roleplaying! All of the dice and the jawbone are printed flat…
Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…
These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…
My Website This is my custom-designed Dart camera setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1. The problem with other setups is that I hit the camera on top when trying to throw a double 20. User…
This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…
remodeled teeth inspired by medical scans and moldings made my dentists - Upper and lower part fit into each other like real teeth but each can stand on their own. Size should be accurate to that of an adult. If u import the file into…
This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…
Mini box for the first fallen teeth Other similar models are in the Dental collection : https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338
🇬🇧 Welcome to London! 👑🟣 On the Occasion of HM Queen Elizabeth II's Platinum Jubilee , we remixed our own Big Ben model to be printable at larger scales, in full color even without MMU, and with the possibility to add lights or a real…
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
Here it is! The remixed Teeth of Terra by Cornivius. I've done my best to make this into a multipart kit that's easy to print and assemble. Glue is optional for everything but the pipe, all other parts go together with Openlock clips -…
I like to print things that don't need glued together, so I remixed the original model to be screwed together instead.
This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…
It's the big bolt from the Lethal Company game. I've been playing so much and I wanted to make some stuff from the game. Visit my site to support my work or just look around: https://www.shellingtonlabs.com If you don't have a printer or…
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
An aboleth perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
Christmas Nativity Decoration
This model consists of two parts: The stone border: Use a black or dark color. I recommend default settings (0.4 nozzle, 0.2 layer, no supports) The portal: For best authentic look, use a purple color. I recommend a plain print sheet with…
EMPLOYEE BALLIN' FREE MODEL Models height ~ 5.1 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
Update: There are now 2 versions of the lock together screw trays. 1) Modular lock together screw trays - Silver coloured in the pictures. These are flat bottom and print with no support. 2) Stacking nesting screw trays - Green coloured…
3d printable ethernet cable label, print in one piece without support, compliant hinge system. I posted 3 sizes but add a comment if you wish another one, or use the fusion file I posted 3D PRINTING SETTINGS 0.12mm
This kitcard is designed in Fusion360. The model from fotos is printed on Prusa mini+ with nozzle 0,4mm. Material is Prusament PLA vanilla white. You can check the print file for more info but its easy and fast print. Please share your…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
for easy storing my network cable during traveling. It is for 20m cable length. i modified it for 10m as well see on Prusaprinters. https://www.prusaprinters.org/prints/47891-cable-spool-ethernet-cable-10m
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
The 3d scan was lacking some detail, so I gave him a complete makeover. Two photos are from my print @ 10cm high with no post processing. I have added the gcode for that print, which had organic supports. Printed with PolyTerra PLA cotton…
This is a remix of RealAbsurdity's wonderful "Modular Snap-Fit Saturn V" rocket design from thingiverse, but I re-built it for printing on my Prusa MMU2S! The coloration is based on as many pictures of Apollo-era Saturn V as I could find,…
UPDATE: 1.51 -reduced amount wifi card sticks out (11/25/24) UPDATE: 1.5 Has been released! -The case has been reduced in size and enforced in key areas. -Added external screen controls. -New power button, still goes missing but it's new!…
Pla 5% You may need help sticking to bed. No supports needed.
Some spooky teeth for your pumpkin, print as many as you need at a scale that fits your pumpkin. Edit: added better grip to the teeth
This is my Mark II X-303 Prometheus from the show Stargate. The model is improved version of my original model and this time comes with several features. It has one hangar bay open and in it, there is an F-302. It has retractable landing…
fishing feeder used in method feeder fishing
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Build your own custom-sized frame…
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
I added teeth because original design was slipping on my handles. Category: 3D Printing
💻Ethernet Cable Runners💻 Nozzle 0.4mm Print 0.2mm Infill 50% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it= idea-prints…
CLIPGEAR is an infinitely expandable, modular gear system. Snap the bases together, clip the gears on, and build your own mechanical creations - or simply use it as a satisfying fidget ! The system is designed to be simple, lightweight,…
Update: Added x2 and x1 clips Simple wall clip for UTP/ethernet cables reuploaded from Thingiverse , original design by Agustin_Pulido
krmítko pro method feeder tištěno z ABS +y ale bude fungovat z jakéhokoliv plastu Method feeder for fishing this is printed from ABS+ but it works with another plastic
First, This is all Tinkerheart's design… with a twist. This is also my first print in place. I combined Tinkerheart's holder with Tinkerheart's clip with a swivel so the stethoscope stays level with motion. The clip, as stated, is good…
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
Ethereal Kiss Statuette in frame Use Wall Generator: arachne
Found this amazing Alien Queen done by Sandon https://www.thingiverse.com/thing:2090893 Unfortunately he has a NO Derivatives license. Totally his call to protect his model from dilution and to honor that I can not upload the changes I…
5 sprocket with various teeth number - module 3 (pitch 9.42mm) to be optionally used in combination with sprocketand pinion https://www.printables.com/model/1266062-rack-and-pinion-module-3 Printed with Flashforge Adventurer 5M Pro…
This is the very first raw test scan data done with a raspberry pi + camera and my DIY 3d printable photogrammetry rig. Everything is based on open soft- and hardware. So feel free to check out my website www.openscan.eu/?lang=en…
Summary Slim RJ45 Ethernet Cap / Coupler that will save your ethernet cables and especially the plastic retaining tabs on your ethernet cables in bags cluttered with other cables. There is one open ended file to customize to your…
This is a cable comb for Cat 5e Ethernet Cables. Looking for a Cat 6 variant of this model? <Click Here> ← To be updated
I made this originally for my significant other who's stethoscope loves to wander away from them when they float around the hospital. Their may be others like them out there, so hopefully this comes in handy for them as well! For those…
I wanted halloween teeth for the miata and didn't like using just a flat piece cut to shape so I drew this up. Teef 1 and 2 are ~75mm tall while 3 is 120mm tall. TEEF 1 are the one in pictures. Just changed dimensions so people would have…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…
A set of digital dentures Upper and Lower models. Please note, custom made dental devices are patient specific and these will not be suitable for anyone else except the person they were made for. These are for demonstration purposes only…
This is 3D printable model of the Promethes Clas NX-59650 Prometheus from the Star Trek. The different colored parts are separated for easier printing. Pieces of some details need to be separated into separate models in the slicer ;) The…
Lucky 13 hands - arranged together for better printing If you like it --> press like it :-) With the original file "[A2] hands.stl" you have to take care of the bed adhesion, because of low contact surface of each hand. I rearranged the…
I created a version 2 that is solid instead of hollow. If you rotate the model so the teeth are straight up, the slicer will have no errors. Additionally no supports or brims are needed to successfully print.
As almost all PET bottles in the EU now have the new design with the tethered cap and all current existing cap 3d models don't work anymore, I took one and recreated it. It implements the important sealing lip, which seals the bottle on…
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
These are 3D-printed 9mm Parabellum scale replicas. The bullets screws into the casing so they can be printed different colors and don't need glue to be assembled. I design full metal jacket, hollow point, and frangible bullets that all…
![Pi PICO-W Slim Case [SNAPS TOGETHER - no glue] (with and without headers)](https://media.printables.com/media/prints/385457/images/3229748_ab46d5e6-982d-4b10-a173-4fe5264d163a/2.png)
