Search results: etrack

Sort order

140 models

P
PrintablesGamerMechanic81

Road America Racetrack Topographic Map Elkhart Lake Wisconsin

I found a way to generate topographic maps from saetlite data, then used prusaslicer 2.7 to emboss a track map on it that matches the curves of the hills in the area. the result is a 3d printable topographic track map The finish Line is…

Print approx. €6.15–€7.51 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
16
Rating
5
P
PrintablesMighty Shrub

SIDETRACK - Hammer Prime Revolver Blaster

BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…

Downloads
2,333
Likes
1,043
Rating
5
P
Printablesthomas

Marbletrack - Spiral (Gravitrax compatible)

The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…

Downloads
1,189
Likes
187
Rating
4.8
P
PrintablesUpdesky

Nurburgring Nordschleife, Nurburg, Germany, racetrack, circuit

Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
1,181
Likes
125
Rating
5
P
PrintablesHerr moshauer

Safety Fence for steep curve racetrack

I spent a long time looking for an elegant solution for the steep curves that isn't permanent. I found the safety fence and adapted it to the scale and my clips. I have modified my clips so that they can be used in steep bends. The fence…

Downloads
517
Likes
59
Rating
4.8

Tobii Eyetracker 5 Curved Monitor Mount 1800R - Samsung Odyssey OLED G9 G93SC G95SC

UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…

Downloads
483
Likes
26
Rating
5
P
PrintablesResinTre

Quest 3 Zenni Prescription EyeTrackVr Mount

You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.

Downloads
331
Likes
29
Rating
4
P
Printablesthomas

Marbletrack - Extendable spacer, bridge, plate and stabilizer (compatible to Gravitrax)

Update 7.02.2023: Added Pre-Build Bridges and a Hexgon Plate. You can extend them with any other element using the top/bottom clips. This spacer (grid)element has several advantages. The Hexagon connector is very tight and holds firmly on…

Downloads
306
Likes
26
Rating
5
P
PrintablesUpdesky

Mount Panorama Circuit, Bathurst, Australia, racetrack, raceway, speedway

Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
300
Likes
19
Rating
5
P
PrintablesSNR Tech Bytes

Fiber Optic Racetrack

Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…

Downloads
291
Likes
60
Rating
5
P
PrintablesUpdesky

Laguna Seca Speedway, Monterey, USA, racetrack, circuit

Laguna Seca Speedway, Monterey, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
256
Likes
28
Rating
4.83
P
PrintablesUpdesky

Daytona International Speedway, USA, racetrack, circuit

Daytona International Speedway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
229
Likes
22
Rating
5
P
PrintablesProhurtz

EyeTrackVR Quest 2 & Quest 3s Camera Mounts

Camera and LED mounts for the Quest 2 for use with the EyeTrackVR project to add eye tracking! Print in PETG for best results, PLA is fine. Both general/V3 LED and V4 LED mounts are included.

Downloads
216
Likes
24
Rating
5
P
PrintablesASH

Sidetrack- Ace of spades muzzle

Muzzle for Sidetrack inspired by Ace of spades hand cannon from Destiny. Print the Muzzle and shroud on the face vertically (as shown below). Use brims where necessary. Uses the same hardware as side track with an additional two m3x5 or…

Downloads
202
Likes
178
Rating
5
P
PrintablesJenson

Bienenwaben Untersetzer Rennstrecken / Honeycomb coasters racetracks

Ich habe mir hier ein ein Paar Untersetzer für Gläser oder Tassen mit Rennstrecken Konstruiert (Nürburgring Nordschleife, Zandvoort , Spa , RedBull Ring , Circuit de Catalunya , Le Mans , Imola , Monza) ------------------- I've designed a…

Downloads
202
Likes
33
Rating
3
P
Printablesblecheimer

Famous Racetracks

EDIT: I got a request for another racetrack, so I added WATKINS GLEN. I was thinking about re-decorating my apartment - spicing-up these old cupboards and lockers or some new pictures on the wall. As I am a huge motorsports fan it might…

Downloads
200
Likes
25
Rating
5
P
PrintablesUpdesky

Watkins Glen, Dix, United States, racetrack, circuit, raceway, speedway

Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
164
Likes
15
Rating
5
P
PrintablesBamJr

FreeTrack - OpenTrack - TrackIR LED holder

A simple DIY LED holder for head tracking, designed for 5mm LEDs. The first iteration (pictured) was designed with the option to mount LEDs on Dupont connectors so that they could be easily replaced. This, however, proved troublesome to…

Downloads
162
Likes
17
Rating
5
P
PrintablesID89

Racetrack Marshallstand

Marshallstand 1:40

Downloads
156
Likes
15
Rating
0
P
PrintablesBuildX

#0161 STRONG #8 Racetrack Double Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…

Downloads
154
Likes
39
Rating
0
P
PrintablesUpdesky

Sebring International Raceway, USA, racetrack, circuit

Sebring International Raceway, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
148
Likes
17
Rating
0
P
PrintablesMBtrack

Circuit de Monaco - Formula 1 Racetrack

Dimensions: 125x139mm Height: 5mm Thickness: 2mm Can be easily scaled up or down. Recommended print setting: Resolution 0.2 or lower Ironing on top surface 20% infill

Downloads
148
Likes
8
Rating
5
P
PrintablesJiří Voclon

Imola racetrack

3D model of the Imola race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
147
Likes
6
Rating
5
P
Printablesmichele MM3D

Nürburgring racetrack extrusion

extrusion of nurburgring nordschleife

Downloads
147
Likes
23
Rating
0
P
PrintablesUpdesky

Road America Circuit, Elkhart Lake, Wisconsin, USA, racetrack, raceway, speedway

Road America Circuit ,Elkhart Lake, Wisconsin, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…

Downloads
140
Likes
24
Rating
0
P
PrintablesUpdesky

Road Atlanta, Braselton, United States, raceway, racetrack, speedway, circuit

Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
138
Likes
15
Rating
5
P
PrintablesPhysics Dude

Phys' Valve Index EyeTrackVR Hardware

Custom solution for a clean, unobtrusive, EyeTrackVR installation in the Valve Index . Project includes: Custom, highly iterated camera and LED mounts based on bitbyt3r's design. These revisions alone may be preferable to some. All-in-one…

Downloads
136
Likes
40
Rating
0
P
PrintablesUpdesky

Masarykův Okruh, Brno, Czech Republic, racetrack, raceway, speedway, circuit

Masarykův Okruh, Brno, Czech Republic, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
135
Likes
8
Rating
0
P
PrintablesViih

Xiao ESP32s3 Case for Quest 2 - EyeTrackVr

Edited so the usb-c cable that powers it goes out straight instead of outwards. Also now has a window so you can have a heatsink on it.

Downloads
129
Likes
13
Rating
0
P
Printablescabezacabra

DIY Freetrack / TrackIr

This is a simple DIY freetrack/ trackIr headset. It is made to use an action cam battery, mine is 33x30 mm from a cheap action cam and 5mm ir leds. The battery connector was bought in aliexpress:…

Downloads
126
Likes
14
Rating
0
P
PrintablesUpdesky

Fuji International Speedway, Oyama, Japan, racetrack, circuit

Fuji International Speedway, Oyama, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
113
Likes
9
Rating
0
P
PrintablesUpdesky

Brands Hatch, Fawkham, United Kingdom, racetrack, raceway, speedway

Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
111
Likes
7
Rating
5
P
PrintablesJiří Voclon

Monza racetrack

3D model of the Monza race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
107
Likes
4
Rating
5
P
PrintablesVodouch

Podpěra pod autodráhu / The car racetrack support

Podpěra pro zvýšení trati autodráhy. Kvůli snadnějšímu tisku je zvlášť na několik dílů. Není to na časté rozkládání, jeden prodlužovací kus se mi podařilo rozlomit, takže spíš složit a nechat být :-) Můj teprve druhý model. A support for…

Downloads
107
Likes
8
Rating
0
P
PrintablesCembo

Modular Marbletrack Compatible with LEGO V1

This marble run is designed to use LEGO bricks as height supports, allowing you to customize and build intricate tracks. It accommodates standard 16mm diameter glass marbles, providing smooth and exciting runs. Enjoy endless fun and…

Downloads
107
Likes
23
Rating
5
P
Printablessopryshko

Freetrack Clip Glasses Mount

My setup: 3x5 mm IR transmitting LED Power supply voltage: 5 V LED voltage drop: 1.3 V LED current: 50 mA 22 Ohm resistor Assembly guide: Print a model Do some calculations. Using this LED array calculator I found that my setup requires a…

Downloads
97
Likes
5
Rating
0
P
PrintablesUpdesky

Tsukuba Circuit, Shimotsuma, Japan, racetrack, speedway, raceway

Tsukuba Circuit, Shimotsuma, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
95
Likes
9
Rating
0
P
PrintablesUpdesky

Las Vegas Strip Circuit, Nevada, USA, Formula 1 racetrack 2023 season

Las Vegas Strip Circuit, Nevada, USA, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…

Downloads
93
Likes
6
Rating
0
P
PrintablesMighty Shrub

Sidetrack - Round Tube Remix

Introducing an excellent Sidetrack remix designed by @Avinashshank_1450204 to use round metric tube for the plunger tube! This makes the blaster much more accessible with minimal changes in hardware. To build this version of the Sidetrack…

Downloads
88
Likes
41
Rating
0
P
PrintablesUpdesky

Sonoma Raceway, Sears Point, United States, racetrack, circuit, speedway

Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
88
Likes
13
Rating
5
P
Printablessorcerer

Headtracking Clips for FreeTrack

6DOF headtracking clips to be used with FreeTrack, TrackHat or other similar headtracking systems. Inspired by http://www.thingiverse.com/thing:62827 . I created two versions of clips to keep the two halves of the arms together. One…

Downloads
84
Likes
4
Rating
0
P
PrintablesKumeh

Gridfinity - UGREEN FineTrack Smart Finder

Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time

Downloads
76
Likes
8
Rating
5
P
PrintablesMighty Shrub

Sidetrack - Flickable Cylinder

This alternate Cylinder allows you to flick the blaster closed! It also has better overall retention in the blaster, so it's less likely to go flying 😁 For printing and assembly, follow the same instructions from the original Sidetrack.…

Downloads
76
Likes
39
Rating
0
P
PrintablesUpdesky

Pista di Fiorano, Italy, racetrack, raceway, speedway, circuit

Pista di Fiorano, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
74
Likes
3
Rating
0
P
PrintablesUpdesky

Goodwood Circuit, United Kingdom, racetrack, raceway, speedway

Goodwood Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
72
Likes
2
Rating
0
P
PrintablesUpdesky

Long Beach Street Circuit, United States, racetrack, circuit, raceway, speedway

Long Beach Street Circuit, USA on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
66
Likes
13
Rating
0
P
PrintablesMBtrack

Circuit de Barcelona-Catalunya - Formula 1 racetrack

Includes 2 versions - Barcelona or Barcelona-Catalunya Dimensions: 202x70 mm Height: 5mm Thickness: 2mm Can be easily scaled up or down. Recommended print setting: Resolution 0.2 or lower Ironing on top surface 20% infill

Downloads
65
Likes
5
Rating
0
P
PrintablesAaron Ferguson

Hotwheels/Matchbox side by side racetrack wall connector mount

Saw lots of single versions of wall mount race track connectors and thought there needs to be a double. So I whipped one up. This is done in PETG, 100% infill at .3mm layer hieght using a .6 nozzle. Speed at 35mm/s. Nozzle at 245 degrees…

Downloads
63
Likes
10
Rating
0
P
PrintablesMighty Shrub

Sidetrack - Speedloader Remix!

Super simple speedloaders for my Sidetrack design! Compact, low hardware, and immensely satisfying to reload 😁 Attaches to the MOLLE Spinshot Cylinder Mount designed by JC Works! The speedloader and mounting peg have a bit of a "break-in"…

Downloads
62
Likes
62
Rating
0
P
PrintablesUpdesky

Phillip Island Circuit, Victoria, Australia racetrack

Phillip Island Circuit, Victoria, Australia, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…

Downloads
57
Likes
4
Rating
5
P
PrintablesUpdesky

Circuito Ascari, Málaga, Spain, racetrack, speedway, raceway, circuit

Circuito Ascari, Málaga, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…

Downloads
56
Likes
8
Rating
0
P
PrintablesJiří Voclon

Monaco racetrack

3D model of the Monaco racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
54
Likes
2
Rating
0
P
PrintablesUpdesky

Twin Ring Motegi, Japan, racetrack, circuit

Twin Ring Motegi, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
54
Likes
8
Rating
0
P
PrintablesMoritz Wander

Tobii Eyetracker 5 - TopMount for MSI Optix MAG274QRF-QD

This Mount is meant to be Printed 4 times and can be clipped to the top of a MSI Optix MAG274QRF-QD screen. The two cable files can be printed once each and are used to stop the cable from pulling the tracker out the Top.

Downloads
52
Likes
5
Rating
0
P
PrintablesUpdesky

Thunderhill Raceway Park, Willows, USA, racetrack, speedway

Thunderhill Raceway Park, Willows, USA, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
51
Likes
5
Rating
0
P
PrintablesID89

Racetrack Building Tower

Sachsenring Turm

Downloads
50
Likes
4
Rating
0
P
Printablesmichele MM3D

Nürburgring Racetrack

Wall Art,Nürburgring Nordschleife Racetrack Die Grüne hölle

Downloads
50
Likes
6
Rating
0
P
PrintablesMichele Blaser

MotoGp 2024 – Sokol International Racetrack – Wall art

Immerse yourself in the thrilling world of MotoGP with my exclusive Wall Art that represents the circuits of the 2024 MotoGP season. This collection features detailed representations of the most iconic circuits from the MotoGP calendar,…

Downloads
50
Likes
1
Rating
0
P
PrintablesJiří Voclon

Misano racetrack

3D model of the Misano racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
48
Likes
5
Rating
5
P
PrintablesAryser

Lying Eight Racetrack for steel ball

I have designed the objec customizable. I can change imediatly for a bigger 8 or a steel balls of a different size. The steel ball can only be insertet (or fall out) in the center!

Downloads
46
Likes
3
Rating
0
P
PrintablesTankerTech

Hahaland Racetrack Adventure Toy - Replacement Parts

General These replacement parts are for the CubicFun hahaland Race Track Adventure Toy pictured above. My kids love this thing but it gets a lot of abuse between my 3 toddlers so I've modeled replacement parts as they've gotten broken.…

Downloads
46
Likes
11
Rating
0
P
PrintablesKolbu 3D

1/2" SocketRack

Made with 12mm c/c holes for mounting. Holes are 5mm ID and fits standard pegboard fasteners.

Downloads
45
Likes
10
Rating
0
P
PrintablesASH

Sidetrack- Trigun muzzle mod

Muzzle for Sidetrack inspired by Vash's revolver from Trigun. Print the Muzzle on the face vertically (as shown below). Use brims where necessary. Uses the same hardware as side track with an additional one m3x35 screw (instead of the…

Downloads
44
Likes
27
Rating
0
P
PrintablesJiří Voclon

Mugello racetrack

3D model of the Mugello race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
43
Likes
2
Rating
0
P
PrintablesLeedle Dynamics

Sidetrack barrel with integrated mega launcher

A replacement for the barrel section of the sidetrack, needs some 4mm or 5/32" elastic cord to run. Check the steps or the pictures for assembly, it is really really simple. I cut it out of the regular frame for the photo because i dont…

Downloads
40
Likes
46
Rating
5
P
PrintableswindX

Sidetrack Muzzle Addition

Even with some PCARs, there is no exposed orange muzzle on the Sidetrack due to how short of a barrel is needed. I made this part to fit on the end of the long barrel variant so that it has some orange on the end for safety reasons (makes…

Downloads
39
Likes
28
Rating
0
P
PrintablesUpdesky

Snetterton, Norwich, Norfolk, United Kingdom, racetrack, raceway, circuit

Snetterton, Norwich, Norfolk, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Downloads
39
Likes
4
Rating
0
P
PrintablesJiří Voclon

Suzuka racetrack

3D model of the Suzuka race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
37
Likes
2
Rating
0
P
PrintablesAlucardWulf

Quest 3 Facetracker Mount

This is a specially designed face tracker that uses an ESP32-CAM module and requires no glue or modifications to the headset itself. It only needs a single M3 screw as a swivel point. The mount simply clicks into place and does not block…

Downloads
37
Likes
3
Rating
0
P
Printablesbudikutija

Velux wiretrack slider

Printed in two parts and then glued together with two component glue. STL only left side model. Made in Blender 3.2 with CAD sketcher: https://makertales.gumroad.com/l/CADsketcher

Downloads
37
Likes
2
Rating
0
P
PrintablesUpdesky

Autodromo dell'Umbria, Italy, racetrack, raceway, speedway

Autodromo dell'Umbria, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…

Downloads
36
Likes
2
Rating
0
P
PrintablesFoldingBlade

tobii eyetracker bracket

bracket for tobii eyetracker 5 use with the extra magnet. this is to mount to a screen bracket from a sim racing screen

Downloads
34
Likes
0
Rating
0
P
PrintablesPancakeWaffles5

Fluxpose Facetracking Mount for Bigscreen Beyond

A face tracker mounting clip with an attached mount for a full body tracking system called Fluxpose

Downloads
33
Likes
6
Rating
0
P
PrintablesJoedazin

Velux curtain wiretrack spare part

Print with support, with the axis of the round hole as Z axis. PETG is advised.

Downloads
33
Likes
0
Rating
0
P
PrintablesProhurtz

Quest 3 Zenni Prescription EyeTrackVR Mount - Separate Files

Separate to left and right eye mount for ease of uploading to online 3D printing services.

Downloads
32
Likes
3
Rating
0
P
PrintablesJoe

Dinosaur Racetrack Toy Car Wheel

Link to toy: https://www.amazon.com/Palotix-Dinosaur-170PCS-Christmas-Birthday/dp/B08HZ6W83X/ There are many similar versions on amazon, but they should all fit. Just heat up the axle with a lighter to ensure a tight fit and put a dab of…

Downloads
30
Likes
10
Rating
0
P
PrintablesChris Willey

Hotwheels/Matchbox side by side racetrack wall connector REMIX single screw mount

wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener

Downloads
29
Likes
7
Rating
0

Ugreen Finetrack G (Rechargable) Hidden Bike Mount

Enclosure for Ugreen Finetrack G (Rechargable) mounted under a bottlecage Ideally printed in ASA Filament for UV resistance (ASA > PET > PETG > Everything else) This requires a longer M5 x 25mm bolt to be mounted properly Additonal Tip:…

Downloads
27
Likes
4
Rating
0
P
PrintablesLuigisvc

Interlagos racetrack test print

I designed this test print in order to check input shaping and accelerations with Klipper Tuning Tower command. Also have fun watching your printer running around this famous circuit. UPDATE 23/08/2023 ADD VERSION WITH 5MM MARKS IN ORDER…

Downloads
27
Likes
2
Rating
0
P
PrintablesDaniel Berger

Modular marbletrack Lego compatible

Build your marbletrack by yourselve! Several parts to have fun with marbles. Build your track with this parts and Lego or similar bricks. The marbletrack is for marbles from 5-10mm. The curved parts are all in clockwise direction. If you…

Downloads
26
Likes
11
Rating
4
P
PrintablesJiří Voclon

Jeddah racetrack

3D model of the Jeddah race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
25
Likes
1
Rating
0
P
PrintablesJiří Voclon

Zandvoort racetrack

3D model of the Zandvoort race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
24
Likes
3
Rating
0
P
PrintablesJiří Voclon

Miami racetrack

3D model of the Miami racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
24
Likes
3
Rating
0
P
Printables_volborski_

Abu Dhabi F1 racetrack

Made for those wall arts in frames. An example of use is shown in the last picture, that is NOT mine. Made, by creating an SVG and then extruding it.

Downloads
24
Likes
1
Rating
0

Steam Frame Facetracker mount with Magnetic Vive and flip-up Babble extension

This is to mount a babble or similar facetracker on a steam frame, with an optional mounting lug for a vive tracker to slide on with a small detent and magnets help retain it on the slider pad. It also includes compatibility with the…

Downloads
24
Likes
2
Rating
0
P
PrintablesAlucardWulf

Quest 3 Eyetracker

Quest 3 eye tracker compatible with VR Optiker prescription lenses. It clicks into the headset without tools, and the lenses snap securely into the adapter.

Downloads
23
Likes
2
Rating
0
P
PrintablesJiří Voclon

Bahrain racetrack

3D model of the Bahrain race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
21
Likes
4
Rating
0
P
PrintablesFriedmutant

D100 Dungeon Timetrack

A time tracker for D100 Dungeon to save the printed one from wearing out so fast, and this also saves me a few seconds each turn. I use two pegs to track time, like on a cribbage board, so I don't lose track of my current position as I…

Downloads
21
Likes
2
Rating
0
P
PrintablesJ 28

Curbs for Micro Racetrack 1:24 Losi Micro B

The Curbs are made for cable duct in size 30x15 mm. You have to drill a 10mm hole in the cable duct, to hold it in place.

Downloads
20
Likes
6
Rating
0
P
PrintablesChance

Sidetrack - Even more woke edition

Shoutout to the haters. short and long versions

Downloads
19
Likes
49
Rating
0
P
PrintablesSam Baker

TideTracker

Frame for weather/tide tracker using an e-ink display Project Link: https://www.hackster.io/ssbaker/e-ink-tide-and-weather-tracker-21447b Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill:…

Downloads
19
Likes
4
Rating
0
P
PrintablesBruzLightyear

Albert Park Racetrack in Melbourne Australia

Albert Park Racetrack in the heart of Melbourne Australia.

Downloads
19
Likes
0
Rating
0
P
PrintablesTooG

FreeTrack Cap Point Model

This is a cap style point model for use with OpenTrack, FreeTrack, or FaceTrackNoIR. It is designed for external power, either via USB or a battery pack. Check out the Serial Build guide on the FreeTrack forums here:…

Downloads
18
Likes
0
Rating
0

Interlagos-racetrack

The Autódromo José Carlos Pace (Interlagos Circuit) , located in the southern zone of São Paulo, is the main motorsport circuit in Latin America and the venue of the São Paulo Formula 1 Grand Prix. Inaugurated in 1940, the current layout…

Downloads
18
Likes
2
Rating
0
P
PrintablesInventorIan

"MagneTrack" MIDI Instrument

The new iteration, “PipKey”, is here: https://www.printables.com/model/995672-pipkey-bluetooth-midi-instrument A magnetic-themed, MIDI-based instrument inspired by the cello and designed to be portable, intuitive, and tactile. (The name…

Downloads
18
Likes
7
Rating
0
P
PrintablesJiří Voclon

Albert Park racetrack

3D model of the Albert Park race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
17
Likes
0
Rating
0
P
PrintablesJiří Voclon

Shanghai racetrack

3D model of the Shanghai racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm

Downloads
17
Likes
1
Rating
0
P
PrintablesChris Marzano

FreeTrack 3 Point Hat Model

FreeTrack is an open source software application that provides cost effective optical head tracking for applications & games. This software closely emulates its commercial counterpart, TrackIR. The headtracking is achieved by attaching…

Downloads
17
Likes
0
Rating
0
P
PrintablesDockGuy

Pacific Raceways PGP Motorsports Park karting racetrack keychain

I was commissioned to make this model for PGP Motorsports park and 3D-print a few hundred as promotional giveaways. Print in PETG or TPU to make a reasonably robust keychain trinket. I do not recommend ABS or PLA as they are too stiff

Downloads
16
Likes
0
Rating
0
P
PrintablesTyler Berg

UGREEN FineTrack Tag Plate for Ridge Wallet (*original screws*)

Accessory plate to hold a UGREEN FineTrack tracking tag onto your Ridge Wallet. ***This design allows you to reuse the original plate screws!*** Just unscrew the screws from the face plate, lay the tracker plate onto the original plate,…

Downloads
15
Likes
3
Rating
0