Search results: evolve

3dworkbech Revolver

Stand for Jabra Evolve 75 Headset

A charging stand for Jabra Evolve 75 wireless headsets. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Materials Anker Powerline Micro USB cable - A8133011 (Other cables probably will not fit) Self-Stick Rubber…

The Ghoul's Revolver - Fallout Show (Cooper Howard)

Colt SAA Revolver Miniature

Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel. Prints as 6 different parts that are press-fit together. Simplified model: The hammer is fixed and no loading gate. Trigger moves but does…

Revolver II, DeSteiner: double-action-path, a way to print it more sturdier, for a long life!

The small nipple on the “double-action-path” was broken three times. I tried to print it 45 degrees for a better layer adhesion , I've added supports, which you have to remove after printing. It works great, even with PLA! Print it with…

Fountain pen cartridge dispenser box. Revolver drum-like storage box for ink pen cartridges

My daughter struggles with all the loose ink pen cartridges in her bag, so I designed a compact storing solution for them. Use an M3 screw (12mm max length) and two m3 serrated lock washers to screw the 3 parts together. Align the cap…

E3D Revo nozzle Revolver

I liked the idea of axe's nozzle holder, but 6 slots is too little space for me. So I changed the box a bit and use the space between the heatbreakes from the other side. In order to use the space in the middle and to save filament, a…

Jabra Evolve Under Desk Mount

Making working from home a bit nicer with less clutter on the desk. This mount allows to stick the headset's remote control under the desk. Print instructions Nothing special. Prints without supports or infills.

Reinforcement part for Jabra EVOLVE 40 Corded Headset

My Jabra EVOLVE 40 headset breaks on the right "arm", so I created this reinforcement part. It can be used both to reinforce an intact headset or to repair (making it usable) a broken one. To have more stability between the printed part…

Jabra Evolve2 65 Headphone holder for IKEA IVAR shelf

As I heard about the contest, I thought my other design (Webcam Cover) would fit perfectly into this category. unfortunately I had already published it shortly before the contest begun so I could not use it for the contest. Today I was…

Prusarduino Nano - Fire Safety System for 3D Printers (evolved)

Hello friends! My overall philosophy here was to create a fire safety system that could be set up easily by anybody, with no programing, arduino, or soldering skills required. Everything is plug & play here. You just have to print the…

Skadis Bose Soundlink Revolve Speaker holder

Ikea Skadis holder for Bose Soundlink Revolve Speaker

Headset holder Jabra Evolve 20 MS Stereo

Headset support for Jabra Evolve 20 MS Stereo and control button Additionally required M4 nut and M4 screw (at least 20mm length). I used a DIN316 wing bolt

Jabra Evolve 65e Buttonplate

Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…

Revolver Stand for 7in revolver

It's a simple build. Use supports and at least 30% infill to ensure the integrity of the structure. Keep in a safe place. This is a presentation stand for a secure area. Don't print this and expect it to keep your revolver secure.

Headset Holder for Jabra Evolve 40

Under desk headset holder for Jabra Evolve 40. Mountable with two countersunk srews. Important: Only the button for the busylight can be reached on the USB controller! Printsettings: - Supports - 0,2 mm layer height

Simple Revolved Vase

Very simple demonstration of the revolve function in Fusion 360, used to make a vase. The Fusion 360 .f3d file is included below. The large vase takes a full day to print. The 50% scaled one takes only 4 hours or so.

display stand label with two colours for DeSteiner Revolver II

Ford Transit MK2 1985 - Bose Revolve+2 - Dashboard Soundbox Holder

In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…

Regalhalterung - HOT TOOLS PROFESSIONAL BLACK GOLD EVOLVE

Filament Prusament PETG Prusa Galaxy Black 70.46 g / 23 065.51 mm / 55 480 mm³ (2 Halterungen) Druckeinstellungen Input Shaper structural Gyroid Infill 10% 4 Perimeter Betttemperatur 90 °C Düsentemperatur 250 °C Düsendurchmesser 0.4 mm…

Revolve Boat Hook Roller v2

FTC FRC Drum designed for the revolve boat hook roller on a 1/2" hex. Includes heat set insert holes for M4x10x6mm

Jabra Evolve 65 joint fix

Jabra Evolve 65 joint fix keeping earpiece still turning. Printed from PETG, nozzle 0.4mm, layer 0.1mm, 100% infill, support on printer pad Sometimes it could be useful to glue A and B parts together by superglue.

The DJ Revolve-It

This functional USB 2.0 Extension and organizer utilizes wireless induction power to light up multiple LEDS. The whole thing is motorized and can be powered by a phone, power-bank or computer. You can access the stationary thumb-drive to…

Revolver Peephole Frame

After designing these, printables.com/model/364772-cute-cat-door-decoration/comments/581319 & printables.com/model/368395-cat-butt-peephole-frame I thought of this novelty door Peephole frame This is a two colour print. Manual colour…

Revolver II : Double & Single Action | mechanically working Prop Gun

Orbit Revolver --- Working Mechanical Blaster

The Orbit Revolver is my fully functional toy blaster designed to be satisfying to handle and as accessible as possible. It is currently my favorite printed model across all my years of 3D printing. I would recommend watching the YouTube…

Revolver Fidget - Remix

I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…

Custom Parts for - Prop Gun | Revolver - Single Action

Thanx to the fantastic work by DeSteiner (as well as his help in making the custom text), I was inspired to make a few custom parts for his prop revolver. All parts have been test printed, and will have the same fit as the original parts…

Revolver | 2-Speed Screwdriver

The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…

Cattleman Revolver - Colt Model 1873 Single Action Army Revolver

Marksman Revolver - ULTRAKILL

Print and make you very own Marksman Revolver! The front of the gun has a small lip for a piece of 3mm acrylic to fit in and potentially light with leds like the game. The chamber has a hole made for a skateboard bearing to fit in. This…

Revolver

I divided the model into parts so that it could be printed with a minimum amount of support.

Joker Revolver

Das ist die Joker Version vom "Prop Gun | Revolver - Single Action" von Steiner3D. Siehe: https://www.thingiverse.com/thing:3004363 oder hier: https://www.printables.com/de/model/276918-prop-gun-revolver-single-action Ich hab den Lauf…

SIDETRACK - Hammer Prime Revolver Blaster

BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…

Snub nose barrel for DeSteiner Revolver II

73mm snub nosed barrel. Picture compares to the original 155mm barrel. Print as per Original files instructions. Credit to DeSteiner making the revolver in the first place 👍

RE9 Leon S. Kennedy - Requiem Revolver

Magnet Organizer / Magnet Dispenser / Magnet Revolver (modular)

** UPDATES ** ⭒ 12.06.2024 → A new ergonomic button has been added. Now it is also easy to transport, the knob is very easy to grip and feels very good. (see pictures) ⭒ 15.06.2024 → Inserts have now also been added individually for…

Revolver Fidget - Remix - p1p add support

file with ready-made supports - bambulab p1p

RSH-12 РШ-12 russian assault revolver dummy 1:1 proportions

I wanted to make an RSH-12 3d model just to test my CAD/designing skills and here we are. On the internet there are plenty of RSH-12 3d models including printable ones but for me it was too boring to make a full plastic brick only for…

Giant ㄥ乇Ꮆㄖ pistol revolver (30132) (10:1 scale)

Giant Lego pistol revolver (x10) Print two part and two join

Jabra evolve 65 joint fix

E_Tech 14 made an awesome jont fix. I took his design and made it even better.. now it can be printed much easier. The design is also optimized. update: both sides Remix of: https://www.thingiverse.com/thing:4724194

Helldivers p4 senator revolver prop

now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props

Colt_Walker_Revolver

asssy original Colt_Walker_Revolver

Cattleman Revolver (for 0.6mm nozzle)

Print is essentially the same with STL's converted to 3MF, and a fix for some of the tighter tolerances. Since I was printing this on a 0.6 mm nozzle, some of the designs had to be adjusted so parts could insert into one another. Supports…

Lego Compatible (30132.dat) Minifig Gun Revolver

This model is compatible with the lego system.

North American Arms (NAA) Revolver Model

This is my North American Arms (NAA) mini revolver model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it…

Shellfish - a Silly Shell-ejecting Revolver Blaster

IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…

3dworkbech Revolver 2.0

Better Printed Pickleball Paddle - "Revolve 3P" - v4

This paddle needs tweaks as it breaks at the neck. Don't print for now. If you want, use it for inspiration to improve. Intro: Pickleball paddles can be ridiculously expensive. However, they are super simple dimensionally. This paddle…

Spinning Revolver pen holder

Update 3-11-2019 Added revolver shaft that can be printed horizontally, credit goes to zaijian for making that improvement. Update 8-30-2017 Changed the stand to accommodate 2 bearings which helped with wobble. It is much sturdier now.…

Trigun Revolver AGL .45 with mechanical parts

A Totally new make of the revolver from the original Trigun anime. This is the post repairs version with the smooth side cylinder. If there is interest I will also make an optional fluted cylinder like he as at the beginning of the…

Revolver Sci‑Fi Ornamentale – Prop 3D ad Alta Definizione

Descrizione Un revolver futuristico dal design aggressivo e ricco di dettagli, pensato come modello 3D da esposizione, cosplay o collezione. Il look unisce linee meccaniche, superfici scolpite e uno stile sci‑fi/gotico che valorizza molto…

Deus Ex: Human Revolution Diamondback .357 Revolver

Webley revolvers

A remix of the original Webley model with added grips. Nr 1 is the original longer barrel, and Nr2 is the shorter barrel. I printed upright using PrusaSlicer organic supports and an elongated over raft below it. Worked out well. Painted…

animal company revolver

revolver

Jabra Evolve2 65 Charging Dock

A charging stand for the Jabra Evolve2 65 Headset Designed to hold the USB C cable that comes with the headset. No support material is necessary. Print in the upright orientation. This is a remix from @daRiddler Jabra Evolve2 65 Dock to…

ULTRAKILL SLAB REVOLVER

the slab revolver from ULTRAKILL, i ripped the original model from the game files and made some modifications to it such as adding more details, and putting slots for glow in the dark parts Print Settings Printer Brand: Creality Printer:…

Ark Survival Evolved Logo

This is the logo of Ark Survival Evolved, the game. Can print it without stand, or print both then assemble them. I printed them flat without support. You can donate/support here : https://www.paypal.me/ludiks , thank you so much if you…

AS-58 Talon revolver(helldivers 2)

split for smaller printers, may updated once the warbond is officially opened and i get a better view. takes a ½ in dowel Category: Props

T4E HDR 50 CAL. HOME DEFENCE REVOLVER UMAREX holster

holster for the hdr 50 umarex revolver

Jabra Evolve 65 Headphone Hinge Repair

Printable fix for when the Jabra Evolve 65 snaps between the on ear element and the headband. Uses two M4x10 screws to clamp onto the headband and the on ear element slides into the holder. The printed material is thin enough to allow for…

Revolver Station

The Revolver Station After creating the revolver and the basic stand, I thought, wouldn't it be cool if I had a proper station that could not only hold my tool but also help me use it by separating out my bits, and giving me a few extra…

Ständer für Cattleman Revolver

Ich habe mir den Cattleman Revolver ausgedruckt. Nun wollte ich ihn noch besser zur Geltung bringen. Da kam mir ein Ständer für ihn in Betracht. Bis auf die Stützen braucht es keine Stützen. Die sind nur für die Steckverbindungen wichtig.…

Bullet for Cattleman Revolver

Bullet modeled for the catlleman revolver by @agepbiz

Animal company golden revolver

my best recreation of the golden revolver

Revolver Fidget Keychain – Slide-Action Toy

Commercial licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A rugged snub-nose revolver reimagined as a…

Revolvedor de tragos

Revolvedor personalizado para cumpleaños de 15

Zarona Mk IIa Quickdraw Stub Revolver 40k darktide

Modeled this up for fun. takes a few pieces of 1/4 in dowel. will probably need gluing and sanding. Category: Props

lego revolver

lego revolver on a scale of 15 to 1 you can print it or cut it from paper and stick it

Fallout 4 Pipe Revolver

Here's my attempt at a Fallout 4 Pipe Revolver. You just need to print one of each part. Here's the assembly and painting instructions, https://www.youtube.com/watch?v=1LjpVGrEZZc . I would appreciate it you posted a make and check out my…

Revolver

Habria que limar algunas partes

ram 1500 rotary revolver knob

just something different for the ram 1500 rotary knob using a revolver cylinder not for use with pla due to heat in vehicle

Peacemaker Revolver Colt Design 1876

Building Instructions are here , follow accordingly, and enjoy your 3D printed Peacemaker!

Zel's Spinning 500 Magnum Revolver Pen/Pencil Holder

This revolver cylinder pen holder is ready to hold all your precision writing instruments and keep them on target for all your paper slaying needs. The standard model has 13mm holes for your normal pens and pencils. To get the model to…

Revolver 686

I print this gun for my son (Red Dead Redemption lover). This weapon is a functional replica for kid fun. I use my Prusa MK3s+ with 0.4mm nozzle. Print with silver and white PETG, but in my opinium PLA is better. Only at parts :…

Dummy 13 Wild West Pack | Cowboy Hat, Dual Holsters & Revolvers

🤠 Dummy 13 Wild West Pack Saddle up and bring your Dummy 13 into the Wild West! This accessory pack transforms your Dummy 13 into a classic cowboy, sheriff, outlaw, or gunslinger with a collection of western-themed accessories designed to…

Gun stand - Dan Wesson or similar size revolver

Simple gun stand for Dan Wesson or similar revolver. Ammo stand is only ok for 4.5mm CO2 ASG ammo of this gun, and the SAS star. Print instructions No raft, no supports, designed to be printed in 0.20mm and with 10-15% infill.

MTB evolve

mtb evolved easy to print

halo combat evolved helmet full and split into 5

this helmet is from halo combat evolved if you have a big printer you can print the whole helmet or if not you can print it in 5 pieces.

Revolver Spinner Paracord Bead

Give your paracord projects a striking, Old West flair with this revolver cylinder-inspired bead! Carefully modeled to resemble a classic six-chamber cylinder, this 3D-printable bead is easy to produce and perfect for adding an…

Lattice Cube - Revolved

This is just another version of my previous Lattice Cube. This one has 2 cubes rotated on the x axis, Print instructions Unassociated tags: Lattice cube Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: 3D…

Revolver knob

Revolver knob A revolver design for the LCD knob competition. Please share your makes! Happy printing!

Revolver remixe from "Gun for Johnny West"

I searched for a simple gun for my kids, very easy to print and good enough for playing. Print each part also mirrored and glue it.

Hellboy Revolver 'Good Samaritan' for Dummy / Lucky / Mini 13

Another revolver for the 13s, this time it's Hellboy's. P.S. Is it too small?

60rd 22LR Ammo Box for Revolvers

I was asked to make a 60rd ammo box by a revolver shooter, so they could slide back the lid and drop 6 rounds out instead of 5. So, I modified my previous 22LR ammo box to hold 60 rounds in 10 rows of 6 rounds. I also modified the lid…

ULTRAKILL Marksman Revolver REMIX

A remix of the Marksman revolver from ULTRAKILL by EHyder20. I made some adjustments and made some new parts to make the model look less Low Poly and to include Glow In The Dark parts. I've printed almost every part so far, but it's not…

ANIMAL COMPANY REVOLVER V2!!!!!

This new version has cosmetic changes and has bullets in the chamber.

Jabra Evolve headset hook

This is a nomad hook for Jabra headset (Evolve 40 and others models). It screws on a desk, a table or a shelf up to 4cm thick. Ideal when you work on multiple desks. The control module clips in the built-in circle. Voici un crochet nomade…

Sci-fi Revolver (Trigun)

! The model shown in the pictures was painted ! Revolver from the old Trigun series (Vash the Stampede). Recommended to print the Revolver in two halfs, and then glue them together. Printing the gun as a whole will probably fail and needs…

gb22 revolver

a revolver prop version using the gb22 frame design. i made the liners in case you want to make different liners in other calibers. for show. rotate the cylinder for each shot. cylinder and barrel liners held in place by the nut fixed the…

Talon Helldivers revolver

I built the revolver in pieces to print easier. The grip has an outline to add the texture of gripping if you wanted to. The way I have the STL set up is the best way I find to print. Please contact me if you may have any questions. Have…

Snub nose revolver prop

inspired by Zsolt Kuczora rhino revolver https://www.artstation.com/artwork/6bB3Ax this model is made by me two bolts m3 and m5 X 12mm up to 16mm

The 13s' Revolver and holster

Revolvers: Revolvers for everyone!!! V2 and V2R2 (longer barrel) are the ones shown in the images. V1 is less refined, but print it if you want. Revolver works on all on all five "13" classed bots. No supports. My first ever TinkerCAD…

Bigger bullet for Cattleman Revolver

I wanted a bullet that can be seen from the front of the revolver.

Hammer For Cattleman Revolver

historically accurater hammer, great for displayed "loaded and cocked"

Johnny West Action Figure Revolver

The .gcode is already cut in half and placed in the most optimal print position. The .stl and .step are left whole in case you want to use them elsewhere. Happy Printing!

Evolve Skateboard (GTR) fenders

Hi there, I created some fenders for my Evolve GTR skateboard with the 150mm(6inch) all train wheels. I printed the fenders in PETG with 3 perimeters and 0.2 layer height. This way they are still a bit flexibel incase you hit something or…

Spinning Revolver Pen Pencil Holder

I drew/designed everything in Fusion360 from scratch. I recently enlarged the openings, made it more friendly to print without supports, and added a place to put your name on it. I have included the Fusion360 file for the base you can…

Revolver Holder w/ & w/out name plate

The stand holds the revolver about 2.5cm above the ground. The revolver will naturally sit at a perfectly vertical angle. But if you place the revolver at different angles, they can stay there. I printed the nameplate with just one layer…

Shotgun shell for Dan-Wesson airsoft revolver

Because i did not find a Dan Wesson shell that fits without a lot of work, i designed my own. Designed for the Dan Wesson 6 inch Revolver. Each shell should hold up to 6 BBs. Maybe you have to drill out the first few millimeters of the…