159 models
Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This will fit on a Behringer X32 sound board. No supports needed.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I created a replacement for my old omnitronic dual cd-player. Maybe it fits to some mixers too, if not the step-file can help to adjust it.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Depending on the precision of your 3D printer, you may want to select a different version. For me, version 24 was the best fit. Cap1: 8.05 x 2.20 mm Cap2: 8.10 x 2.20 mm Cap3: 8.15 x 2.20 mm Cap4: 8.20 x 2.20 mm Cap5: 8.25 x 2.20 mm Cap6:…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
Fader para potenciometro deslizante Category: Music
This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…
This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Merging of Darth low poly head & my design of a sound desk fader. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution: 0.1mm layer height Infill: 20% Filament: Technology Outlet PLA…
This is a spare fader knob, i designed, based on the Original Part, as i could not find a fader that is similar to the one my friend needed. I Printed it with 0.1 Layer Height to make it as seemless as possible. I would recommend printing…
I started from the nanokontrol2 fader Cap uploaded by xantharian and I made a couple of simple changes. Be reassured, these fader caps work interchangeably on either version of the korg nanokontrol (1 or 2) Print instructions Category:…
Fader caps inspired on Pioneer S9 for Vestax, Ecler and Innofader. The vestax model will probably work with mini innofader. The innofader pnp model works with Ecler Nuo 2.0 channel faders too. Print at 0.05 to have smooth finish. Print…
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
This replacement knob is designed for Pioneer DDJ controllers and features the P(rintable)-Lock system for secure attachment. It replaces original parts such as DAC2685, DNK6440, DNK5888 and comes with an integrated mounting plate for…
Another Remix of the Darth Fader, This time for Pioneer Dj Mixers May Require Supports for his Chin
A piece to gang together two faders on a mixing board. Many boards use 24mm faders, some use 25mm, both versions are included. IF YOU PRINT THIS AND IT WORKS ON YOUR MIXER, PLEASE COMMENT WITH MAKE/MODEL Spacing for Mackie boards is also…
A portable volume mixer that connects over usb-c. I'm using it with deej, but it can be used for any software you want. You'll need: 5 sliding potentiometers ( https://amazon.de/dp/B081JNQ7MM ) 1 Arduino Nano usb-c (or similar) 4 M2…
I know there are some other versions of the infamous Darth Fader out there, but i could not find one that was easy to print, and fit Yamaha Consoles, This one is printable without Supports and will fit LS9 and M7 consoles.
Tone knob (Treble, Bass, Fader) for SAAB 9-3 Generation 2 For me it worked to print it without supports on my modified Ender 3. Print with the hole down. Might need some force to push in place. The car key worked great to push with ;)…
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
A fader bridge for joining 2 neighboring channels for stereo signals, or other grouping applications. Designed for my Allen & Heath mixer, but should work on other brand mixers with 26mm length fader caps. (Mine has 14mm in-between…
I designed this simple part to help calibrate the cross fader on the DDJ-1000 controller. Using the service guide this will help to put the crossfader into the three positions needed for calibration. You can see the video at
Includes 3x regular faders 2 x tempo faders Custom Fader Kit 5 Pack for Denon DJ PRIME GO - Personalize your controller with custom faders
A model of a fader cap for dj mixer potentiometers or similar.
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
Enclosure for 5 75mm x 9mm faders and an Arduino Pro Micro. Size is about 10x8cm. The bottom is held on with M2 screws. I use it together with the awesome deej software. To keep it from moving around a "sticky gel pad" found on aliexpress…
I actually forgot to take a picture of the finished product, so I will snap a pic and post it next time I'm at the sound board (at church). This model prints multicolored very well, though. Print it upright with supports (as seen in the…
Its not perfect but it works ;) 8 Slider Version here: https://www.thingiverse.com/thing:4514085 UPDATE: I added Fader Knobs that look better than the stock ones This enclosure holds 5 slide potentiometers and one arduino nano. In my case…
Fader knob replacement for Yamaha TF5 Mixer and many more (Soundcraft, Behringer, Allen & Heat,...)… Fit also fader 1.2 with x4 lenght x5mm height Printed horizontaly give a better finish but supports will be more difficult to remove (or…
This is a 3D model of a custom mix fader cap, designed to be compatible with the Rane One DJ Controller. It is not an official Rane product, nor is it endorsed or affiliated with Rane or any of its partners. The model was created…
This custom fader cap for the KORG NANO KONTROL 1 and 2 is specifically designed for live performances, offering a far more intuitive feel and significantly improved channel control. It provides better grip, smoother handling, and…
Final Remix of the Darth Fader, This version should fit older desks, Lighting Desks, and Various other devices with smaller posts. Check the requirements, one version requires support, the other doesnt, both fit the same size post
Replacement fader knob for the Yamaha O1V96 digital mixing console
This is a very simple replacement fader cap for most professional audio mixer consoles or (DMX) light consoles. It will fit the standard 2mm × 1.2mm fader levers. In the images above the grey fader caps are original Behringer caps, the…
Why We lost some of the faders to our Soundcraft Series 4 mixing desk, so I removed yet another fader from our desk and modeled this replacement. Features Tested to fit on a Soundcraft Series 4 mixing desk May fit other desks as well…
Pioneer S9 crossfader external fader cap stopper by Flavour G'z Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 100
The knob has a orientation. It has a smaller hill and a bigger one. Orient them as you like, but intendet is, that the bigger one is in the back. Print with 0.12 layerheight or less. But 0.12 provides a nice grip texture on the top surface.
Lock the fader in place if you don't need it, and entirely remove the risk of accidentally causing chaos. Tested on a DJM-S7 only. It should fit other mixers of the DJM range as well. Fader slot width: 55mm Fader knob width: 12mm
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Darth Fader for Avolites consoles. I printed at 0.15 with a 0.4 nozzle. I did use organic supports on the bottom of the helmut.
This is a very simple part to connect the two main faders of a Behringer Xenyx mixer so it's easier to keep stereo volumes equal. This fits on a 1204USB, so I assume it fits others in this range. Takes only seconds to print. Print…
3D PRINTING SETTINGS Material: PLA Layer Height: .2 mm Infill: 20%
The most faithful reconstruction of an ETC "Small Fader Pot Knob" that I could manage. This fits a wide variety of ETC consoles. They can be purchased from ETC for $1 each, but are only available in black - I like having the ability to…
Ive searched for a Behirnger Wing sparepart fader knob knob. I didnt find one that i could buy in an afordabe price. So i grabbed one ar grabcad and modified it. The main probelm the slot for the fader motor isnt more or less "standard"…
Vivitar Audio Mixer Fader Control Knob Enhance your audio mixing experience with the Vivitar Audio Mixer Fader Control Knob. Designed for precision and ease of use, this control knob offers smooth and responsive adjustments, allowing you…
I found that printing out the hollowed-out fader knob as was resulted in failed prints, so made the base solid with a hollow inside. Also added a centre line, like the original.
My colleuge wanted a replacment Fader Cap for the 188mm stalk on their Allen & Heath ZED 14 audi mixer. I found a close aproximation on thingivers [https://www.thingiverse.com/thing:4557896] and then used tinkercad to modify the model. we…
Will provide extra security when applying your fader knob reducing unwanted downward force. Printed on three different printers, I would say the tolerances are good for most machines although my A1 Mini is such a good boy I could perhaps…
small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
fader knob for BEHRINGER PMP500 powermixer
This is a fader cap for DJ Mixers. It is compatible with most mixers on the market, including Pioneer DJM's. It is also compatible with all Innofaders. Required Materials : 16g of filament STL Notes : Fader Cap - AMS - is for…
Modern radios in the Ford Sierra / Merkur don't need the fader joystick and some want a USB port or blanked off. This replicates the OEM cover 83-BG-13K-732-BA. If you have a right hand drive car, just mirror this model. I have included…
5 Slider Version: https://www.thingiverse.com/thing:4196719 Someone asked me to make one with 8 sliders so here you have it This enclosure holds 8 slide potentiometers and one arduino nano. In my case i use this to controll the volume of…
I made these to have the faders more visually present in the dark. Therefore, I printed the faders with GlowInTheDark PLA Filament. The mounting holes on the bottom side took some experimenting before they exactly fit the Z1 faders. If…
Modular synth module for Eurorack to attenuate/fade the signal. Quite simple to build as it only requires two resistors: one 10kohm slider pot and one 1kohm resistor. More details here: www.codeof.me/modular-attenuator-for-darker-techno/…
https://cad.onshape.com/documents/d371584d7160c723bbf761f6/w/2f5678efad21dca11f6d6ea2/e/23b2ec25e7ee325d5a9e6f6f?renderMode=0&uiState=6613006142973974d60d759e
I wanted a few faders on a small controller, but the available options on the market were way too expensive. So I designed my own. Full build instructions and firmware here: https://github.com/JennToo/MidiSliders
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Attention: This design is for non-standard sliding potentiometers. It does not fit normal sliding potentiometers. If you want to use it with normal sliding potentiometers, you need to adapt the design to fit them. This is my deej audio…
Home made USB MIDI controller with a motorized fader. It has only one physical fader, but it simulates 8 (virtual faders) with only one active at a time. Active fader is selected using the red buttons. In addition, there are 8 general…
Just a cap that connect faders. For SQ series.
NEW KNURLED KNOB VERSION (V2) AND FADER CAP ADDED! Custom KORG KAOSS PAD knobs with a clear indicator to visualize the level and a smaller design for safer live handling of the fx depth knob, preventing accidental touches of the input…
Alternative knobs and faders for the KORG nanoKontrol 2 or anything else that follows a similar dimension. You can print them in different colors to "label" each channel. For more details and building process:…
DIY Controller for any shortcut (MIDI, DMX, Photoshop, Premiere, Keyboard, etc). It's designed to hold an Arduino Pro Micro, one 10k rotary pot and one 10k slider pot. [PT] Controle para qualquer atalho (MIDI, DMX, Photoshop, Premiere,…
Designed specifically for the Jands Vista M1, S1, & S3 but i'm sure it will fit any of their Vista series consoles, prior to the Chroma-Q merger. So not compatible with the newer EX series consoles. Print vertically on end with tree…
Pacman version of audio mixing console fader
Mixfader Dock for Numark PT-01 Scratch, you can add tags to the plate, and print in multicolour with m600 command or using MMU2.
Sadly, I no longer have access to the board to test the fit--this model may be a bit too big, and require downscaling to fit.
USB MIDI Fader controller A super-simple MIDI controller that lets you control two parameters at the same time. By pressing buttons, you can program up to 4 levels, each allowing for different combinations of the faders. The LEDs help you…
Renovacion de los faders de una mesa de luces Grand MA
Rane TTM ve Sixty Serisi Fader Taşıyıcı (raylar üzerinde kayan) plastik olduğu için kırılan parçanın metal ve plastik versiyonları ve küçük bir kaydırıcısı var.
Crossfader lock for the ALLEN & HEATH XONE:23 to prevent accidental moves and ensure stable control during live performance, likely fitting other XONE mixers as well. Printed with MK 3.5S
My friend has a Behringer mixer panel, and i made him a custom “Master” fader. This fader button, couples left/right master channels. Printed on Creality Ender 5 pro, with basic settings (Standard Quality) Nozzle: 0.4 Bed Temp: 60 Nozzle…
Quickly spot your microphone channel with this 3D printable MIC fader cap . Use it at home, in public spaces, studios, events – wherever you mix. Print and mix like a pro! Fits most mixers, including Behringer, Yamaha, and many others . .…
Slider case in different sizes for common 75mm (60mm travel) B103 linear potentiometers. Fusion file to generate different amounts of sliders integrated and generated models for 1-5 sliders. Needs M2 ~4mm screws for potentiometers.…
This is a model inspired by clouds. I think it has a comfortable grip for your finger to rest on. The measurements are: 25x12x10mm
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Replacement fader/slider knob for an alesis MultiMix12 FireWire printed in PLA with no supports
Prints good laying on its side as it is in the second picture with supports touching buildplate only. I'd recommend 0.12 layer height but I had good results with 0.2 as well.
SLIM and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
This is the plastic part of the Pioneer mixer fader. I didn't find a replacement part at an affordable price, so I made an accurate and workable model for 3d printing. You need to position the model bottom down and use supports. You can…
Scaled to fit the Yamaha Rivage over the curved edge. I’ve also used it on an ETC Eos Ti or Gio and it fits super well over the motorized faders. I work in a Broadway road house and we sit for hours and hours at audio or lighting…
Even though you can disable the Z1 Mk2's crossfader functionality in Traktor, you may want something to hold it in the center, like I did.
Colored faders for the NOVATION LAUNCH CONTROL XL MK2, improving visual control and workflow in live setups. Printed with MK 3.5S
Fader side-panel cap for the ultimate music-multi tool, Dubby.
This is a knob for a slide potentiometer. If you've ever had to locate a source for these kinds of knobs, you know that your options are limited at best, ridiculously expensive at medium, and totally absent at worst. Well, with a 3d…
Printed with PLA on a Creality Hi @0.2mm layer height.
Colored faders for the NOVATION LAUNCH CONTROL XL 3, improving visual control and workflow in live setups. Printed with MK 3.5S
I made a Deej mixer case that fits 60mm faders. Printed in PLA with 3 walls no support. You will need a few screews, i used what i had laying around. The brackets are supporting the faders so they don't fall in the caes. Have fun printing.
maybe the print is a little bit too rapid but the work is solid and sturdy
Réalisé pour ma Behringer Xenyx QX1204USB
Replace for M-Audio Axiom Fader Cap (1stGen).
I wanted to replace the small faders on my Zoom R-24 studio with long throw faders, so went with a old school look from the 1960. video part 1 of build. The parts with no supports or rafts. There are many different sizes of pots this one…
Will print easily without supports. I printed it at 0.12mm for a smooth result but I guess 0.16mm will do the trick as well. In the second file I tried to print an inlay for the center line. As it is so small it's very hard to create a…
A more ergonomic and better fitting replacement for the original fader knob I printed in white PLA on the Ender 5 S1 enjoy!
Do you sometimes accidentally hit the cross fader and then wonder why your track doesn't play suddenly? No more if you quickly print this one. :) More will be added soon
![Console Companion [Fader cover/upright script holder]](https://media.printables.com/media/prints/913324/images/6976357_80491f00-779c-43ad-898e-f2726463a1ce_5f647a96-b54b-455e-94ba-6e87eec10de8/img_0558.jpg)
