39 models
This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for PETGSource material: PET
Printing Instructions: Perimeters x1 (I found that just one perimeter was required.) Top & bottom layers x3 Infill 0% If you have any questions, please feel free to contact me & please share your makes Thx.
(Description in english below // Englischsprachige Beschreibung folgt unten) Hier ein Modell eines Bauzauns im Maßstab 1:32, z.B. für eine Carrerabahn. Im Set sind 4 Teile enthalten: Der Bauzaun, eine Personentür, Standsockel und…
my take on the balloon head fighters like the ones in https://www.thingiverse.com/thing:6173073 print in ABS, PLA, PETG or Nylon supports needed for almost all parts you'll need: 3-4mm elastic cord (round or flat) double face tape or glue…
Reproduction of some discontinued toy farm fencing that my wife had as a kid for my son to play with. Grandparents still have the fence pieces; but we could not find any to buy for his toy collection at home. These are inspired by…
Fencing for 28mm-40mm wargaming. It can be configured into straight or L-shapes depending on whether you choose the L-shaped or straight feet provided. Optional barbed wire. Easy print, no supports.
Fencing game to play whit your friends! You will need: Elastic string Large needles for sword Water balloons I also took a wooden board to make the base, about 260x120mm. Have fun!
This a simple holder to hold a foil or epee weapon on a wall. The holder is angled slightly upwards to keep the weapons
This is designed to hold Epee and Foil weapons. It might be able to hold sabre as well, but I haven't tested that. I printed mine at 20% infill, no supports, no raft, and .2mm layer height using the .2mm Quality setting in PrusaSlicer.
I have remixed the Fencing Weapon Holder kindly created by plaisthos however required one with screw holes to suit my needs. I hope that this helps someone else and saves them some time. 20% Infill 0.2 Layer Height 1.2mm Wall Thickness…
Trophy for fencing champions! Whether it's a national champion, the winner of the local competition, or just a talented athlete who works hard, this trophy is for everyone! After all, everyone should be celebrated! Printing info Use…
This is a basic Épée Fencing Sword compatible with “Dummy 13 Version 1.0”. Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0
A diy weapon tester for fencing. You will need: 3 x banana plugs connectors (…
This is a fencing sword for your dummy 13 figure... you can use it for stop motion or just plain play. It's nice and long and can be printed without supports. Hope you enjoy... en garde!
This contains both sides and a clip for an American style 2-prong body cord. Prong holes are enlarged to prevent minor print defects from affecting assembly. The holes are threaded and accept M3x10 and one M3x16 screws. The 16mm screw is…
3D-Printed Referee & P-Cards for Fencing Print your own referee cards and P-cards for fencing! Standard soccer size 75 x 105mm. 1mm thick for rapid printing but sturdy enought for tournament use. Material Options You can print them in PLA…
This model consists of 3 parts. Please download .3mf file for getting seperated parts Base Plate with Body Player Head Sword/Sabre If you wish to print this in single piece, please download STL file. Supported should be given if required.…
Garden Edge Fencing Now its getting warmer time to tidy the garden. Needed to replace the wooden edging around the grass, so I designed this panel that uses a small clip to join one to another. Its looking good so far but I've run out of…
⚔ Fencing Capybara – The Chonky Duelist! 🐾 Meet the Fencing Capybara – a charming, thickly detailed little warrior ready to defend your desktop, garden, or printer shelf with style! Few supports are needed. I used organic-style supports,…
I ended up with some 1-3/8 chain link fence gates, and I wanted to use them on some fencing hung on T-post. I made these to use 5/8 bolts, nuts, and washers as the hinge pin and a 3/8 bolt as the post lock and pinch bolt. Slide the hinge…
this is a simple design to set up your tape ribbon fence. needs support for printing . Needs 2 screws
This is a clip that is fixable to a post of a wall in order to set up an electric fence. The V2 won't do for fencing tape that are effectively electrified,as the metal screws will be too close to the tape. But you can add insulated tape…
Channel the elegance and precision of classical fencing with this stunning 3D printable figurine that captures a skilled swordswoman in perfect fighting stance. This detailed STL model showcases a graceful female fencer with flowing hair,…
Designed in OpenSCAD. Used OpenSCAD to remix (truncate and augment) a cable clip design to suit the fencing clip purpose. Utility clip to pull rabbit fencing firmly alongside a gardening metal raised bed GitHub: […
- sword holder - has holes for straps - fits IMEX sheath
The shortest possible tang for a fencing epee, designed to be used with an existing tip, wire, guard, bodycord socket, grip, and hex nut. Print the unthreaded version if you would rather use a die to cut the threads yourself. I found the…
Designs I prepared 3 Designs for you: A) Spare Parts + Nut Holder: 5 Pieces - Isolation Top + Bottom + Base + Nuts This design lets you carry all "original" parts with you in case you are not allowed to use this modification on a…
When you need a 90° angle in your electric fence, and you are using fencing tape. You can print these and screw them to your posts. Work nicely
I use ¾" EMT Conduit on my raised bed gardens to hang fencing on. Whipped up a cap for the top of the conduit with a small hook to hold up the fencing.
Print on default temperatures for you filament type and printer type.
Intended use is a TPU sword tip for fencing. I DO NOT recommend printing this model in other materials for the sword tip, as it may break or be dangerous to opponents during games. This is a humorous addition to a sword and may not be…
A hook and eyelet fitting for 868 mesh fencing (Doppelstabmattenzaun). You'll need 1x Back and 1x Hook_1 + 2 or 2x Eyelet with 4x M4x4 inserts and 4x M4x20 countersunk screws. In addition, there is a mailbox holder you can use if the…
This is a basic Épée Fencing Sword compatible with “Dummy 13 Version 1.0”. Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0
3D-Printed Referee & P-Cards for Fencing Print your own referee cards and P-cards for fencing! Standard soccer size 75 x 105mm. 1mm thick for rapid printing but sturdy enought for tournament use. Material Options You can print them in PLA…
This is a fencing sword for your dummy 13 figure... you can use it for stop motion or just plain play. It's nice and long and can be printed without supports. Hope you enjoy... en garde!
