418 models
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
Cookie cutters in the shape of chemistry flasks. 🛠 Technical details: ✅ no support material needed 🌀 5% infill 📏 layer height: 0.15 mm
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 41mm x 30mm 6mm Keyring hole
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Replacement pivot for the Hydro Flask lid strap
If you want to store your 100 mL measuring flask in a drawer without all of the fluid flowing to the top, this is it. It also helps to get to the liquid with a syringe wihtout having to hold the measuring flask. The total height of the…
This was a quick graduated cylinder for use at bath time for making “potions”
Expand your car or truck cup holder to secure a regular coffee mug or 32oz hydroflask. Center also can secure a can of Red Bull. Bottom is enclosed so the insert can be secured to the car cup holder. I used some velcro tape. Mugs that fit…
This multipurpose car cup holder can hold just about any kind of bottle but will specifically hold must types of Hydroflasks up to 32oz. Due to cutting out as much material as I could and and having everything at an upward angle, there…
This plate / jig holds an 8oz flask for the XTool F1 laser... (About ~ 237ml) Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls, honeycomb pattern… ** PLEASE: **…
Made this for my sister to fit her large hydro flask in a normal-sized car cupholder. Made the middle hollow to reduce the amount of plastic and lower print time as well as act as extra storage.
A simple adapter to fit a standard sized Hydroflask in the Tesla Model 3 cupholder. A clearance cut ensures it won't interfere with the other cupholder. The base is hollow allowing for extra storage while reducing material usage. Edges…
Soft drinking bottle used in running sports are difficult to dry after cleaning. This stand makes it easy! Can be used for bottles with a narrow or wide opening and short bottles as well as bottles longer than the stand (grill needed) The…
There are 150mm and 200mm height options. Optional drip tray.
A dryer stand for 500ml soft flask bottles from a Salomon running vest. Remix of Rainer Stropek's design.
A simple adapter to allow your 32oz Hydro Flask to fit in your cars cup holder. Was designed to fit in a Honda CRV but should work for others. Print with your standard settings for most materials.
This adapter will keep your Hydroflask from flying around the car. Simple print. Fits snugly around a 32 oz Hydroflask. Model files are provided in case you want to modify to fit a custom bottle. Parametric Design.
I designed this insert for 2022 Rivian R1S (it's incredible). But like most vehicles, there is no convenient place to hold a 32oz water bottle. If you love your Hydroflask or Nalgene bottle, you know what I mean. The same goes for…
Designed for the 40oz / 1.2L HydroFlask bottle. Measurements of the section that goes into the car's cup holder: Diameter: 7.5 cm Height: 5.72 cm
Work in Progress!! I recently got into casting aluminum and wanted to make a small flask for casting smaller parts. The inside dimensions are 180mmx160mmx60mm(x2), so the total height is 120mm. I designed this Flask in two halves, the…
Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.…
flask with polygons update · added STLs design inspired by traditional clay honey containers from the south of Portugal photo shows print with: 0.16mm layer height 15% gyroid infill no brim or supports printing in 0.16 instead of 0.20…
UPDATE 8/24/20: I've added Fusion 360 and STEP files for easier remixing. Sorry for not adding them sooner! I'm not hardcore about my bike nor about bike stuff, but I do care about having a good water bottle with me when I ride. So I made…
This expands the front center console cup holders to accommodate a 32 or 40-oz hydroflask in a Toyota RAV4 Prime. It may work with other RAV4's as well. Please use it at your own risk, as I take no responsibility if it causes any damage…
I found that people didn't have a decent way of carrying large amount of quarters around the local arcade. In most cases, they would either keep them in the plastic cups provided by the bar or dump them into their pockets. I wanted a…
This model is specifically designed to fit in a 2016 Ford Escape cup holder but would likely fit in other vehicle cup holders.
Simple funnel for easily filling a hip flask. Other designs had spouts that were longer than necessary, so designed my own simpler and smaller design. The spout is 10mm wide, as my hip flask has an 11mm tube. 3D printed items should not…
For whatever reason, the Hydro Flask bottles have become very popular in my daughter's middle school. I admit, they are really nice and well made. She asked if I could make some for her and her friends on my 3D printer, so I made a scale…
This is the "back side" … In other words you can engrave the back side of the 8oz flask with this plate / jig… ( 8oz / ~ 237ml ). For use with the XTool F1 … Note: > You can print this plate in any filament you want. (However, a “tough”…
I lost the little funnel for filling up my hip flask, so this one is sized for a small hip flask. The funnel bit is just less than 10mm, and the top bit is 30 mm wide. There are 2 models here, one with a straight funnel bit, and another…
Print in place hip flask. fully printable in upright position. I added a logo to mine if you do so increase shell thickness so walls are solid. if you don't do that the slicing software sees the logo as part of the wall and your flask my…
This is a simple chemistry conical flask, easy and fast to print. enjoy :D Modeled in solidworks.
Most of the modular sand casting molds are difficult to cast, and machine. This one is very easy to sand cast 2 Part mold (use a pattern board, or pins to align the two halves) 1 Mold will create half the cast (eg a cope or a drag though…
Yes, this is yet another bottle drying stand. This one is specifically for Hydroflask and compatible bottles, such as Takeya and EcoVessel. I found that the universal ones didn't keep the bottle from falling over if it shifted to the…
Multiboard flask holders in the following sizes: 25, 27.5, 30, 32.5, 35, 37.5, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115 and 120mm. The flask holders uses the flexible MultiConnect connector. Just attach…
Introducing my innovative and unique design for dice storage, inspired by laboratory flasks and potions. This dice storage item is a sleek and stylish way to keep your dice organized and secure, with a fun and creative twist. The design…
This is a tray for use with the 500ml Salomon Soft Flask Bottle Dryer Rack you can download here: https://www.printables.com/model/938523-500ml-salomon-soft-flask-bottle-dryer-rack The model includes a tray and an insert which provides a…
Hello all! I needed to make a cup adapter for my large water bottle for my car (which is a 2018 Honda Pilot). I figure that different cars have different cup holder sizes. I designed this one to be strong and be printed with very little…
This model is compatible with the lego system.
The Erlenmeyer flask is the unsung hero of the laboratory, embodying the perfect fusion of form and function. With its iconic conical shape and narrow neck, it excels at mixing, swirling, and pouring liquids with precision and ease. Its…
I stretched out the holes and shortened the top part of the cup holder to use less filament and print faster. I also changed the overhang so it would print better.
Erlenmeyer flask designed in build123d for 3d printing as a prop/costume piece. Designed for printing with vase mode (spiralize outer contour) or hollow. My version was printed with clear PLA and filled with halloween “decorative fill”…
I bought some Harrier soft flasks recently and designed a dryer around them. The 4 legs can be removed and stowed inside with the lid on top. The lid is made to a fairly tight tolerance so you may want to sand slightly around the edge so…
Display your Estus Flask in style with this stand that was designed to look like the in game art work. The stand was modeled using the Estus Flask created by 3D2N (https://www.thingiverse.com/thing:1543005), and interfaces with the flask…
Remix of the existing adapter from Tex. Modified to fit a large hydroflask that's fitted with the protective boot.
I needed a cup holder for my water bottle on my 8040 sim rig, but all of the ones I could find online were sized for 1L Nalgene bottles, which are quite a bit narrower than my 1L insulated hydroflask bottle. This one has an internal…
Model designed to fit securely into the front center console drink holders in a 2018 and newer Ford Expedition. It also works with newer F150 models, just not as perfectly. The model will accommodate most one-quart water bottles and…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
Stand for a round bottom flask (RBF). Scale to whatever size required. Unable to upload the FreeCAD file used to design this but contact me if you'd like it. Print instructions Scale to desired size and print. PLA is recommended as it's…
I needed cupholders for the middle seats of my Tesla Model X. This fits the 2020 6-seater seats and hooks onto the seat next to the seat belt holders as shown in the picture. The cupholder size is designed to fit a 32oz or 40oz…
In the 2015+ Ford F-150 the cup holders are too small to hold a Hydro Flask. This print hangs on the tracks next to the central console, and holds your large Hydro Flask for you. This fits great in my 2015 Ford F-150. Print Directions I…
Got tired of my drink mix scoop being a little to wide to easily dump into my soft flasks so I mad a quickie funnel. Fits just right for dumping a scoop of stick drink powder into a soft flask without getting all over... I don't use the…
This model is best printed in TPU or another flexible filament so it still protects your hydroflask. I printed the one shown in Overture TPU at the following settings on my Prusa mk3s+: Layer height: 0.2mm All speeds: 20 mm/s Infill:…
Cookie cutter in the shape of a conical flask (such as those used in science labs). If you don't have a recipe to start with, I've tested and included photos of cookies I've made using this recipe: https://youtu.be/hvFNVAOvOXk Print…
I made it in one part on Creality Ender 3 but if your printer is smaller you can print it in 2 parts. Printed in PLA. Infill 20-30% is enought No support nedded Files : 1 → Complet part 2→ Bottom (part 1/2) 3→ Top part (2/2)
I made this for fun, just print it in vase mode. Use whatever settings and filament you like. This design should work with almost any material. All slopes are under 45 degrees.
Are you a mad scientist? An evil villain in the making? Then this toxic chemist pal is for you! Gloop and Protopasta merged together to form a special collab for the February Endless PLA Subscription! Learn more about this collab here:…
Thank you GarageMonkeySan for this well designed and practical tool! The original, and this remix, are shaped for fridges that dispense water separate from the ice. **If you have a combo Ice/Water dispenser, which many modern fridges do,…
A simple holder for round-bottom flasks. Models in .blend format included for customisation, so it fits your needs! MAKE SURE TO PRINT THE HOLDER WITH HEAT-RESISTANT MATERIAL (PLA can withstand only up to 60°C)
Two models in one file. All separate elements, so pick and choose (check the potion in the bottle before printing). All fused, except for the cork. My printer is not working now, so I have no info on how to print. Once my printer works…
A stand for holding most sizes of round bottom flask similar to a cork stand, and modeled after one. The TPU liner is glued to the PLA base to prevent the flask from sliding around. Print Settings Printer Brand: Monoprice Printer: Maker…
My wife and I really liked BadKarbon 's taller top for this cupholder adapter. It works great for my wife's bottles and coffee mugs. I had some fitment issues with mine though. My LTT 40oz water bottle fits but is so snug that it scrapes…
Funnel that fits either Hydro or Takeya water flasks. Canted design because ice maker won't accommodate tall water flasks. This a second iteration. Print instructions Default settings for Prusament. Printed on Mk3S. Check my IG for more…
This is to help dispense ice/water into containers that don't fit under your fridge slot, particularly Hydro Flask insulated bottles with a 52mm inner diameter, although it's helpful for all sorts of containers. It's got two slots, where…
Printer settings: 0.4mm nozzle 0.3mm layer height 15% gyroid infill PLA+
Note: This was remixed from a model on Thingiverse and is now imported here. Update: I printed this and all the tips I have (including the longest tip I have, TS-ILS) fit. Also, check out the comments to find where to get the adapter! I…
No support needed, infill: 10%, nozzle: 220°C, bed :60%,
Download this free 3D model of a 100 ml flask stand and optimise your laboratory experience! This specific model has been designed to offer a safe and stable stand for 100 ml flasks, providing a practical solution for your laboratory…
I created this model to hold a full size hydro-flask in the Mustang Mach-e. This model hangs off the side of the console, leaving the other cup holders free for other beverages. I recommend you use this cup holder on the passenger side…
***DO NOT USE FOR ACTUAL CHEMISTRY EXPERIMENTS*** ***MODEL USE ONLY*** A basic Erlenmeyer flask. I Printed out of polypropylene to increase chemical resistance and made elephants toothpaste. I only did this when I was certain there would…
Don't get me wrong, I love my 2017 Volvo XC90 but the backseat cupholders are pretty much worthless. They are millimeters too small to handle the most popular waterbottles! I searched around thingiverse and found this…
Basic Labcoins with a Flask. Diameter 50mm × Height 5mm (recommended) + "LAB/COIN" text variant Diameter 50mm × Height 3mm
I was getting fed up with our flexible flasks laying around on the drying board and never properly getting dry. There are other similar ones on Printables, but non of them seemed quite right for my needs. Happy Printing!
This is a re-make of willie42's Casting Ring, but with an alignment notch so that I don't have to pay attention to the alignment of the two halves. There's also a chamfer for perfect centering for the eventuality that the clearance is too…
Salomon Hydrapak Dryer for 500ml Soft Flask
Just stretched strongcraig's Hydro Flask modular cup holder adapter top piece in Meshmixer, because there were complaints about it being too short and flasks falling out if you brake too hard. I don't have a Hydro Flask to test it with,…
Interlocking Nalgene/Hydro flask water bottle holder. Printed with PLA Plus at 5% infill. Inner diameter ended up at 94.144mm
I designed this valve cover for the Salomon Soft Flask . Satisfying closing noise and feel!! The Salomon hydration soft flask is great for running, but when using without a running vest, you can easily spill a lot of water trying to reach…
Simple Erlenmeyerish flask, made solid, so customize through the slicer of your choice! :D Angle of the base is quite high and will thus need support on many printers. Category: Tools
There are two things that have a special place in my heart: Science, and hilariously-oversized objects. So, when I should have been doing other things, I designed an Erlenmeyer-Flask-shaped container. I'm thinking Halloween, tea light,…
Update: My own gcode and 3mf uploaded for all Part in a single print. This is a remix of https://www.thingiverse.com/thing:4225667 . We support their license and apply the same on this design. Quote:BEFORE DOWNLOADING >>> Please read the…
3-piece modular cup holder for F-150 Inserts anchor down into existing cupholder using built in spring clips and expose M5D8L9 heatset inserts on top, spaced 4.5" center to center. Cupholder itself fits silicone booted hydroflask/Nalgene…
This is a wide neck Erlenmeyer flask inspired design (full model) intended for spiral vase mode. It can be used as a decorative element, pencil holder, flower vase, etc. etc. Your imagination is the limit. p.s. Print on the images was…
Ive always hated having my hydroflask rolling around in my truck. Designed a basic extended cup holder to allow me to secure my hydroflask/thermoflask while driving. I found a lot of the other models around just didnt fit my vehicles cup…
Hello there, I made a DnD Potion model, designed specifically to enhance physical inventory management in your tabletop gaming adventures. This model offers a solution for organizing and tracking your potions in a tangible and immersive…
It's 75ml hip flask. really good to fit your pocket! :)
Ständer für Rundkolben, in verschiedenen Durchmessern. Vorsicht, PLA ist nur bis 50°C stabil. Für höhere Temperaturen, ein Material mit besserer Wärmebeständigkeit wählen.
This is a handle that I designed for my 64oz (1.89 liter) water bottle to make it a bit easier to hold. I measured this for the official hydro flask specs so if you have something that looks like that it might not fit right off since some…
To make myself a copy of the print-and-play (PnP) solitaire boardgame Under Falling Skies I wanted to make the markers more interesting than the originals. I made the aliens based on the original Space Invaders game (but I haven't…
I made this to have a meal for our kid with us all the time. The small flasks top outside fits in a MAM baby bottle ( http://www.mambaby.com/en/the-products/bottles--cups/bottles/index-26960-en.html ) so you don't have to be "careful"…
Insert for a HydroFlask Boot for containing an Apple AirTag. This model is two separate discs. Outer disc to be printed in a harder impact material, PLA, PTEG, ASA, ABS. As well as an Inner disc to be printed in a softer cushioning…
A handle for Takeya/Thermoflask 32oz tumblers that are commonly found at Costco. It helps to put a single layer of gaff/duct/electrical tape on the inside of the ring to help it hold/grip to the tumbler (see photos) . Design may be…
This was designed for my sister's 2007 Honda CRV. I think it would probably work for any 3rd gen CRV, so 2007 - 2010. This is an adapter so a Nalgene or Hydroflask, or similar sized water bottle can fit in the cup holder. The V1 model was…
This is a work in progress, I decided to make a tray that will hold adjustable cubbies.
Small flask funnel. I printed with a raft.....your choice. If you found this useful, please donate what you think it is worth to my paypal.me/Midvale1955. Help cover the time of design. Thanks, Enjoy! Category: Household
bottom: 26mmx26mm, middle: 60mmx45mm, top inner radius 14mm, height 95mm
Another part of the fully printable lab is my drying rack for volumetric flasks. Standard racks often consist of simple pins and volumetric flasks are prone to breaking since they are hold at the neck and not at the sturdy base. This rack…
