1,882 models
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Use arachne wall generator + smooth vase mode! A flexible squishy fidget loop designed to be squeezed, stretched, shaken, bent, and manipulated by hand. The model prints in vase mode with a single-wall structure, making it lightweight,…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Join here to get access: https://www.patreon.com/kogi3d Material: PLA (recommended) Layer Height: 0.2 mm or finer Infill: 15% or higher Supports: Not required. If you experience any adhesion issues, especially with the head piece,…
Print approx. €5.77–€7.06 excl. taxPreliminary estimate for one variant
Easily printable wrist. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelné zápěstí. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament PLA…
Print approx. €12.58–€15.37 excl. taxPreliminary estimate for one variant
A redesigned version of the face mask buckle with flexibility built into the design. The accordion design adds elasticity to the buckle, providing relief to the wearer while still maintaining the necessary rigidity. Design is currently…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
The Flexible camera mount for Ender 3 Pro by Meganoodle would not work for me, as my CR-Touch module would interfere with the printers ability to use the X-axis Z-stop switch. My version uses another method to clip on to the X-axis motor…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant
The flexible strap replacement Swatch Irony Chrono 19mm watches. Three kinds of watch straps Classic, Flex, and Fitness.
Print approx. €4.58–€5.59 excl. taxPreliminary estimate for one variant
Ist Flexibel
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…
Print approx. €9.50–€11.61 excl. taxPreliminary estimate for PETGSource material: PET
remix of a tie by @maker81, made from chainmail. updated in the slicer to fit.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This is the V1 of my print-in-place griffin. I tried to keep it simple so it could be printed in less than 1 hour; it printed in 1:12h in my Ender 2 Pro. Of course, if you like this one, I'll add more details to it so it looks more like a…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
3 types of flexible Portable Air duct couplers are attached suitable for joining 130mm OD PVC concertina pipe. (Pipe size is used for my Delonghi unit... there are other diameters used by some brands). The extra 2m duct I ordered (non…
Print approx. €12.98–€15.87 excl. taxPreliminary estimate for PETGSource material: PET
The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…
FlexibleBone(wm).stl - original version, 5 phalanges 🥴 FlexibleBone(wm_more flexi).stl - more flexible version, 6 phalanges 🥴 FlexibleBone(wm_more flexi_long).stl - more flexible version, 7 phalanges 🥴 6mm hole for keychain Easy to print,…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Veyra – The Thorned Serpent of Legends Born from ancient flames and hardened by stone, Veyra is said to have slumbered beneath volcanic mountains for centuries. Its body bristles with jagged thorns, each scale sharper than steel, forming…
phone stand with flexible design
TriFlex The extremely flexible 3D printable fabric! Most fabrics have limited drapability so I really wanted to create a fabric that was truly fabric like, and I think I succeeded. This includes the following characteristics: Triangle…
BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…
Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…
Maybe a slightly different filament Clip. First insert the clip into the spool by turning it slightly and then click the filament into the groove. Suitable for Prusament spools , or spools with an internal dimension of 60mm . The width of…
The gripper beaks can take the shape of the object they hold, like in this case an orange! Printing it is pretty self explanatory, or watch the short: https://youtube.com/shorts/1ziQGQiweF8?feature=share edit: Just to clarify this is not…
Don't forget to give me a like 🧡 Share photos of your prints 🥕 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬 I made two versions - with eyes and without 👀. The carrot top prints separately. It has a small…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…
Universal strong flexible clamp Universal spring clamp, suitable for holding, joining, or gluing parts. The clamp is printed using a print-in-place method; inserting the jaws into the model creates constant, resilient pressure. I…
NO AMS, NO SUPPORTS ✅ Use glue when assembling 💧 Don't forget to give me a like 🧡 Share photos of your prints 🌶 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬
This is more like a slicer hack rather than a design but it works as expected. This is a flexible fabric type that has several uses. I use it to filter air intakes on fans. You can modify the air flow by changing the infill on the slicer.…
Push your broom between the jaws and it will stay. Printed w/ Filaflex40 and PLA. The flex part came out kind of stringy, but a quick torch clean up of the business side, and it looks great. I left the string on the back to assist in the…
Hexagonal Chainmail NASA Tie articulated If you like it, press like it! ;-) Like the idea of printable chainmails, but had no application for it…up to now ;-) Print it out and put a rubber band or something else through the parts at the…
I redesigned the original “IGRARING” for extra flexibility, the additional hole in the circular section allows for easier opening and closing while the internal slit provides the needed flexibility due to material compliance. The original…
This model is designed to be printed in flexible filament to make a flip flop that is US Male size 10 . You can scale the model to make it smaller or larger to fit your foot. I recommend using 5% infill or less. The less amount of infill…
With this rail track, you layout is not limited by the standard shapes. It's also great to overcome small bumps, such as the edge of a carpet. Compatible with Brio, Ikea Lillabo and Playtive tracks Print-in-place without supports If you…
This is a very long snake (over a meter long), which has a small hole in the head to insert fishing line through. I personally use this as a cat toy, but it could be used to scare some friends! In the pictures, the model is scaled down to…
This is a great articulated Ankylosaurus. Its all print in place except the tale (to make a faster print). Theres no need of supports because I have already add them to make a faster and more economic print. Its articulated parts are the…
Shoe insoles incase yours arent cutting it, are damaged, or lack breathability etc.
Reversible TPU Door Stop to hold a door open or closed. The cutout pattern actually serves a purpose other than looking cool. It allows you to select a firm or flexible grip on the door depending on which orientation you use. If it is…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
This self-designed flexible case fits perfectly on the Apple iPhone 13 pro (iPhone 14 pro version included as well). It offers precise cutouts and covered buttons that are easy to press. I had to experiment with the print settings quite a…
Cable Rolo is designed to be printed as flat, then inserted into the ROLO tool, put it on the Prusa heatbed which is preheated on 100°C and after 30 seconds when it become soft you can easily roll it. (Like pancake:) Please watch added…
Reuploaded LocoRico flexible brio compatible train track from Thingiverse, original URL is https://www.thingiverse.com/thing:5019335 . Check that URL for licensing requirements (currently, but this might not be accurate when you're…
6mm hole for keychain Easy to print, no supports ✅ ©Personal use only 💀 👉 Check My Boosty 👈 Join my Telegram! ⭐💬
Pulpo muy bien hecho facil de imprimir y articulado va de genial y es muy flexibles
This tool accomplishes a goal that few other tools can: copy bigger complex contours. Place the Duplicator against any curvy contour with the arrows visible and pointing to the contour. Carefully transfer it to the medium (or even a…
Simple flexible slug ideal for TPU printing.
This is a flexible case for the iPhone 12 Pro Max. This must be printed in TPU, TPE, or other flexible materials including some nylons. Do NOT print this in PLA, PETG, ABS, ASA, or any other material that is not flexible. You may not be…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Flexi low poly Dachshund
Designed in Fusion 360 for Galaxy S21. Needs supports “everywhere”. Print it in TPU with around 8% infill and it will have a nice squish to it. Included the f3d file if people want to tweak the parameters Update: Added my 3mf file so…
A set of cat ears with lots of features to (hopefully) keep them in one piece. Bed Adhesion - should stick just fine but some printers might need “mouse ears” Layer height - 0.2mm (finer layer heights with make the top surfaces smoother)…
I experimented with making a segmented flexible hose. Took a few tries until I got the tolerances right. But it works great now. Print instructions Category: Machine Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
The source marked this model as adult content.
Why settle for a stiff, boring map when you can have one that bends, flexes, and rolls up like a pro? This flexi world map lays flat when you need it, and tucks away when you don’t. Welcome to GlennovitS3D. Join the Club on Printables.com…
Inspired from the wheels on Andrew Nollan's Noob Tube from the National Havoc Robot League, I have created a simple toy somewhere between a squish toy and a fidget spinner. Printed in TPU, the spiral blades are quite flexible and can be…
This is a flexible phone case for the Apple iPhone 15 Pro. It optionally supports the addition of an adhesive metal MagSafe ring in the back pocket, and has a separately printed inlay ring for lens protection. The main case is meant to be…
Easily printable cervical vertebrae with discs. No wipe tower. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelná krční obratle s ploténkami. Bez čistící věže tištěno. Segmentace CT dat…
This model represent a living ammonite. It's a remix of: https://www.thingiverse.com/thing:3785257 https://www.thingiverse.com/thing:1611970 I really like the articulated model of lexlang, but I wanted to make some changes: a new shell…
Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…
Bendy train track for non-standard curves
🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…
Gift beauty to your friends or sell stunning creations with this adorable and flexible dragon! Customize with your favorite colors to craft a one-of-a-kind dragon that will amaze everyone. ✨🌈 Commercial License 🌟🚀✨ Join My Patreon ! 🚀…
Cooking time: over 4 hours 🔥🍳 I recommend using PLA for the yolk that's 'fed' on eco-friendly materials. Its rich color resembles free-range eggs 🦖. Printing without supports and other eggshell 🐣✅ Easy assembly — no glue 🙌 ✅ Use…
Remix of https://www.printables.com/model/198807-pulpo-flexiblearticulado. I was having a heck of a time getting Cura to do the supports right for the fins, so I added some to the model with Meshmixer. Figured I'd post it here in case…
Flex arm to hold your smartphone with integrated charging lead. Great for taking pictures as a tripod. Also great to watch movies while laying in bed. Comes with a smartphone clamp for 6" and one for 5" phones. Fusion360 source included,…
It's a unicorn with a long 3d flexible body I will add versions with different number of segments when i have some more time Please don't try to sell prints from this model without asking me for permission first.
Flexible door stop with grip bumps. The door stop is designed to flex underneath a door so that it can wedge more tightly. Two size options are available: 80mm length with 2mm thick wall and catch teeth 120mm length with 3mm thick wall…
Articulated octopus-style ring with eight flexible tentacles and a smooth central loop. Each arm moves independently, creating a satisfying fidget motion and an eye-catching organic shape. Designed to print in one piece, fun to…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
A small flexible dragon takes about 20 mins or less two print AGAIN BY PRINTZEE this is not mine
A bigger version of my 75mm flexible hose. More or less made for my specific situation. That's why there's the Y-split piece. Print instructions Category: Machine Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
🔵 Flexible Frog 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ I am releasing (for a longer time) a last flexible model of this type. I intend to focus primarily on the models from the movies and TV shows. I am also planning to release many practical models. I…
These bracelets feature a chain-like design, offering flexibility and adaptability for various uses. Their bendable structure makes them ideal for projects requiring a non-rigid connection or decorative elements. Durable yet flexible,…
Design Concept This flexible door stopper combines functionality with a simple, modern design. The grooves allow for additional grip and flexibility, adapting easily to various door gaps. Usage Ideal for home or office environments, this…
A relatively simple cat toy printed out of flexible filament. My cat absolute loves it: Carefully remove every bit of stringing before starting to play with your cat! Please keep in mind that you shall not let your cat play alone with…
Lego compatible flexible octopus! Just had to do it. Printing Bed adhesion is important, if you keep having trouble a raft could work. Tested at 0.2mm layer height. Collection of lego compatible stuff Print in place hinges Print in place…
Rana flexible para imprimir en el lugar sin soportes parte de un trabajo que le hice a un amigo :) groot flexi: https://www.printables.com/es/model/673768-groot-flexi-cute Alien flexi:https:…
Introducing a unique and sturdy modular helping hand for soldering and PCB work. My design features a flexible arm system with precision-engineered ball joints that ensure excellent maneuverability while holding delicate components…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
As a mechanical switch, I use an Outemu blue switch (a clone of Cherry MX). The most foolproof way is to use a switch that has walls on all 4 sides, I think it's called "dustproof", for example this one: Use the Y mark on wood.stl and…
Printed in TPU. 5% infill works best.
This is my dragon, I hope you like it. This model is print in place. Filling: 15% Extent: 2 This creatively designed and poseable "dragon" model is finished with intricate details. Its flexibility makes it an incredibly realistic dragon.…
This Little Doggo ist printed best in PLA or PETG, it doesn't need any supports. Printer: Anycubic i3 Mega S modded Filament: Prusament PLA Galaxy Black other Settings:
This is not a a replacement or addition for LEGO Duplo Train-Tracks. It just so happens that my kid confuses the different toys and uses them side by side. But kids are kids :D The track element is split into 6 interconnected segments…
This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…
A flexible sculpture that is seemly useless until you fold it together. The joints are 3D printed and prints in under an hour. Try to get someone to guess what it is before folding it together. Let me know what you think. I need…
Use with the HSW Display Arm for the Dummy 13 & now have it on your desk or tabletop. Plate Print Profile is available: HERE Also pictured: Batman (Dummy 13 variant) & Screw Top Container to hold your extra parts === Newest models are…
A simple, articulated duck made using the tools here: https://www.thingiverse.com/thing:2840744 https://www.thingiverse.com/thing:2135142 No rafts, no supports. Make sure your printer is calibrated well, especially in terms of extrusion…
I found the phone holder on the arm quite weird. Every part of the flexible arm is adjustable using screws, but the phone holder uses these questionable bending ribs to hold a phone in place? No thank you. I just made a quick clamp for…
This is a flexible armrest tray that I created for my couch so I can leave my cup of tea, or my snacks in a flat place without the worry of it falling or tipping because of the couching of the sofa. Print the test piece first to see if…
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
