4,895 models
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
Instruction how to train your dragon. After printing, you have to make some bends. The most important is bending of the tail a little up. You can also bend it a little into V shape Next important thing is bending of wings a little bit up.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Introducing the DIY Fly Swatter Gun, the ultimate weapon in your battle against mosquitoes. This 3D print model lets you build your own mosquito-swatting machine. Just snap the pieces together, no tools required! With a reach of 30cm,…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for PETGSource material: PET
A butterfly to put on your wall. Uses art from PublicDomainVectors.org . When printing without webbing, less than 100% (full bed) is likely to cause problems with the thinner parts of the wing. It's a good idea to slow down printing to…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Butterfly Kit Card in business card format. Use it to mark your cocktail glass, decorate your home with it or surprise someone. The text can be customized in the slice program.
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
Printing Instructions: For Prusa MK3S or MINI , you can use the provided gcode - it includes filament change pauses. For other printers / slicers, set a filament change after 0.4mm, and another after 0.8mm. (model is 1.2mm total…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Another model from my 15-year-old son, this time inspired by hours playing the game Valorant. Quite a lot of experimentation went into the creation of this cosplay prop. The ease of which the parts of the model connect together will…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
There are two versions of the design. The first version consists of one piece. If printing at a height of layer 0.12, you must change the filament at layer 22. The second version consists of two pieces, each piece is printed separately in…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Being high maintenance, the Alicorn requires supports, especially for her delicate wings. New poses will be captured, when time can be frozen and stored (hopefully soon.) The correct term for this majestic creature is Alicorn, although,…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for one variant
Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
PLA Print instructions PLA 0,2mm
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Best at this size, going too small loses detail. Created in ZBrush.
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Spaceballs Eagle 5 Flying RV
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Diese kleine Falle fürs Nutellaglas lockt die kleinen Fruchtfliegen an und sammelt sie im inneren. Durch den Trichter wird ihnen der Rückflug erschwert. Im Inneren könnt ihr zb. Obst oder eine Mischung aus Spülmittel und Essig zum…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
After playing with the flying night dragon ( https://www.printables.com/de/model/404447-flying-night-dragon/comments/847889 ). We thought it would fun to release him from a slingshot. So I created this. You can use a PTFE-tube to prevent…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
Simple butterfly model with 1mm deep pockets to represent (and easily paint) the patterns on a monarch butterfly's wings. The antennae are a little thick to keep them from breaking off.
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
My RC Model Plane for the Make-it-fly Contest My RC Model Plane for the Make-it-fly Contest So, this is my RC model plane for the Make-it-fly contest. I really hope I'll win, but to be honest, I know it's almost impossible. To be honest,…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
Butterfly knife blade (Butterfly Comb / Balisong Comb)
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
3D Puzzle model of “Dragonfly”. Model is made of 28pieces. Original size has each piece width of 2mm. Printing information: PLA or PETG 15% Infill is enough printing time is ~ 9 hours in case of origin size
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
A question came my way, whether there were also nice things to wear in the hair that could be 3D printed? The person in question does not make a bun in the hair and does not wear hair bands or hair combs. Logically, a hair clip remained.…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Mr. Kim Leng Thai Food Flying Restaurant from the 5th Element. or torture test benchy. ?? kimleng3 = basic model without computer aided orientation. (pick your own orientation) kimlengorientationvs = auto oriented with meshmixer for best…
Print approx. €18.32–€22.39 excl. taxPreliminary estimate for one variant
A design inspired by the soft structure of butterfly wings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant
Printable fly vise prototype. The taper and threads will need grease for best results, I have been using some heavy multipurpose I had on hand. WORK IN PROGRESS
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Attention veteran pilots of the ‘Verse! Are you tired of having to re-assemble your ship every time you feel like flying to Persephone for a Fruity Oaty Bar? Or when parts fall off every time you full burn? Worry no more! Download plans…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
Original of this model is made by Dariam and it is decoration which you can put in the flower pot.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Print with black, and add a color change around 1.30mm to switch to red. Use 0.10 or 0.20mm layers. The model can be safely downsized for a Prusa Mini.
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
Easy to make a cute Dragon flying keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
ИГРУШЕЧНЫЙ ПИСТОЛЕТ, СТРЕЛЯЮЩИЙ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. ИГРУШЕЧНЫЙ ПИСТОЛЕТ, КОТОРЫЙ СТРЕЛЯЕТ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. НЕ ТРЕБУЕТ ДОПОЛНИТЕЛЬНЫХ ДЕТАЛЕЙ. ПРОСТО ПРИНТЕР И МАТЕРИАЛ. НЕКОТОРЫЕ ДЕТАЛИ ПЕЧАТИ С ОПОРАМИ.
Print approx. €8.21–€10.03 excl. taxPreliminary estimate for one variant
Two color swap options to choose from “Whole Body” version: To achieve a two color butterfly as shown in the tile picture., change filament after half of the layers to print. “Wings & Body separated ” version: Print the body parts in a…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
After some testing of propellers that were already available, I decided (because I had the test tool anyway), to try it another way. Instead of setting up an aerodynamic model in the software, I decided to investigate whether the…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Nice and detailed wall art silhouette of th mythic Boeing B-17 "Flying Fortress". Adjustable size. I accept suggestions.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Simple, beautiful butterfly pendant for which you don't need any supports. Printed in just 13 minutes! Use the color change for an optimal result.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €24.50–€29.94 excl. taxPreliminary estimate for one variant
This was really just a proof of concept idea. Wanted to see how many colour changes I could fit into one print. I made it as thin as possible (2 layers per colour) just to hurry it along and see how it turns out. It came out a lot better…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
The Noble NB4/NB4+ remote is really great, and the movable steering wheel ‘arm’ is nice to allow left and righ-handed driving, as well as going ‘flat’ for easier transport. The only negative I've found is that the wheel arm tends to move…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Attach a disc to a piece of paper using the push pin. Mark the dot on the paper next to the Start sign. Locate the hole on the disk near the…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Club Tail Dragonfly
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
Coin with butterfly engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Simple flyer stand. It is printed without supports.
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple and easy to print Butterfly Cupcake Top
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Wall art: Butterfly on lily (two colours)
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Toy. Sensory tray for kids.
Print approx. €7.22–€8.82 excl. taxPreliminary estimate for one variant
I've printed it with an Ender 3 V3 SE using Creality Print 0.2mm 0.2mm 5% infill The sizes are more or less the exact same the original mini fig uses IN THE G-CODE the STL itself is way smaller
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
two colours - wallart, coaster, pendant
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Fling it in a horizontal position and it will fly. it works ! its a flying disc , some call a frisbee others call it a hub cap YES of course it flies ! I printed one in white PET on edge using support only on the bottom edge so that…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
I like the design of the suet ball holder by @ivyMike , as his design allows to feed fatballs to the birds without the commonly used nets around the suet ball. Those nets are dangerous for small birds and unnecessary waste. So it is good…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a fruit fly trap, reminiscent of the iconic Sydney Opera House. It screws on as a lid on standard 50 mm diameter glass jars. Taco sauce, jam and Dijon mustard are products commonly sold in this smaller jar size. I fill mine with a…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Simple aber effektive Katzenklappe für ein Fliegengitter an der Terassentüre. So kann die Katze im Sommer, wenn die Terassentüre offen ist, problemlos rein und raus, ohne dass das Fliegengitter im Weg ist. Einfach mit PLA drucken und dann…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
(Deutsche Beschreibung: siehe unten) I have tried to design a wind chime based on Leonardo da Vinci's flying machine, the Ornithoper . The wind chime should be as close as possible to the original sketch. I hope you like it! Printing…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
This modular flying stand for DnD and other tabletop RPGs can be used to lift the players or NPCS in the air. It is designed with a 1 inch / 2,5cm = 5 feet playing grid in mind and can lift players, enemies and NPCs up to 35 feet in the…
Print approx. €2.52–€3.09 excl. taxPreliminary estimate for one variant
A replacement corner piece for a fly screen with an aluminum frame 25mm. It is a press fit in the aluminum frame. I printed the corners with PLA. Support is needed, which can be easily cut off with a sharp knife. Interface pattern…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This tool holder is suitable for REGAL VISE. You can rotate a holder when tying You can set a additional tool tray under tool holder for small tools or hooks.
Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant
Wall art: Dragonfly (three colours)
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Wall art: Butterfly and lily (four colours)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Fruit Fly Trap Simple, highly effective fruit fly trap with a sleek, modern design. For print to be completely watertight, I highly recommend applying a clear coat or epoxy sealant. Size - 50mm x 50mm (Diameter x Height)
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Stencil: Dragonfly
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Originated from the previously designed Butterfly Hair Clip. Matching pendants for necklace or for earrings. As pendant for a necklace in 2 different sizes. Same size as the hairclip (± 11cm = Big) or one size smaller (± 8cm - Medium).…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Be award, insects belong to the ecosystem like all beeings! Print in one or two colors. The colour of the cap might influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Fly swatter handle for Fly Swatter V2 (2023) by Chrise_2000@ChrisE . Dimensions are 8mm x 300mm printed diagonally. No support needed! Best to print in PETG for elasticity. Enjoy!
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Flying Dragon Decor. The models at the MIA are the best to work with. Just clean -even meshes that take to displacment better than most. Using the Normals for displacement with these models tends to work the best - as compared to using…
Print approx. €7.26–€8.87 excl. taxPreliminary estimate for one variant
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Wall art: Butterfly on lily (two colours)
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
MaVeRa Balisong Trainer Butterfly Knife T-Master This model has been a second version on https://www.printables.com/model/1323899-mavera-balisong-trainer-butterfly-knife cleaned of unnecessary play through several printing samples and…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I believe, that I created my usefull Removable Combination Butterfly Corner Code for everyone, who need connect a some stuff, like furniture, shelfs or some DIY projects. I tried to design a very minimalistic and simple design of my…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Slim spool for line stock
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a clone of a original MSA Firefly II deadman key
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Schmetterling Gelbsticker für Pflanzen
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Stable Flyer VI by Joāo Hackbart
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
For Joysways Dragonfly /HK Skipper. This is glued into the bottom of the hull with the back aligned with the step. The actual foil can be clipped in and out, and is held in with two 4M dome head cap screws. There is a hole in from the…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
So I did this quick model to fit a 4mm square tube to a Stickybones Fly Rig socket and be able to use a normal winder. Printed in PETG vertically with the base towards the plate. No special settings, the fit will be super tight so be sure…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
200 mm grill with fly motif
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
We recently took our twin girls to an outdoor storytime for kids at a local bookstore. While we were there, I noticed another family hauled their kids to the performance in a Radio Flyer All-Terrain Steel & Wood Wagon. We currently own a…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
While searching for the right fly screen, I came across foldable fly screens. Think that ones are better than the aluminium frame version, because easier to mount, no scratches on the frame while mounting, no damages to the sealings.…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PLA/PETG Layer Height: 0.10 Infill % : 15 Supports: Yes, Snug Print Orientation: As modeled Remove the supports as one piece - it makes a nice flying disc too!
Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant
LED low flying reindeer warning sign. 4 red glowing LEDs will warn your guests about these seasonal upcoming low flying reindeers. Printed in German but an English variant is available too. The complete electronics is battery powered and…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This print was a request from someone, I figured why the heck not? I honestly learned a lot through the design and print of this one about clearance dimensions required for 3D printing without having the layers stick together between…
This is a remix of my Flying Copter Toy :) My first ones still last strong but everyone is talking about toroidal rotors. I really like this design and I think it is a meaningful appreciation of the main design. But try it out yourself! I…
This thing spirals long distances like nobody's business and flies with ghost-like movement! I have made a major update… a TWISTY update if you will ! 🌀 Please, check out the video above. Every throw is around 50 to 60 yards plus! ↪…
NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…
Fruit Fly Trap with Secure Lid A compact and functional fruit fly trap designed to blend practicality with modern style. The container features a sleek hexagon-patterned body for a clean geometric look, while the textured lid provides a…
Simply hold the Snap-Fly between your fingers like you're about to snap then… snap and fly! ✈ If you're left handed, hold the Snap-Fly upside-down and watch it defy gravity! The small “mouse-ears” are just for better bed adhesion and can…
Working butterfly comb, print 2 handles and one comb. It's quite tight to clip it together, but you don't want it to fly apart mid swipe. It works really well. Printed in both PLA an PETG pretty good results for both. Print Settings…
A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…
A small and simple flying propeller toy for all ages. The propeller doubles as a spinning top when it lands. Print instructions Just print and play
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that…
A butterfly knife. Based on Squid Industries Squiddy. Requires 2x m3 x 12 and 2x m3 nuts. Demo and assembly below: This model is marked under “Sharing Without Attribution". I would appreciate if you would at least say “Designed by…
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
FULLY WORKING BUTTERFLY KNIFE
I had so much fun making this that I plan on making more similar flying models- but I don't know what I should make next. Another WWI bird like a Sopwith Camel? Something bizarre like a pusher prop F-104 Starfighter? Something else…
My son wanted a trainer balisong (aka butterfly knife) for his Halloween costume. I found a few 3D Printable designs out there and printed them. But the weight and size never seemed right. So, I figured I would just custom design one for…
All credits go to: 8ran https://www.thingiverse.com/thing:2810756
A print-in-place balisong trainer knife. Supports are needed for the pins and handles. I recommend printing at 0.10mm for the internal pins for a smooth rotation. The rest of the print can be printed at whichever layer height suits you.
