1,821 models
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
The source marked this model as adult content.
This deer sculpture reflects the elegance and serenity of a wild stag, with detailed antlers and posture that make it ideal for winter decor, fairy tale scenes, or nature lovers. Printing : Compatible with FDM and resin printers Supports…
These nine decorative trees based on fractals have increasing levels of complexity, with Tree #1 printing in 1 minute and Tree #9 printing in over 9 hours. I was inspired to design this project using Vase Mode after printing some…
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Slightly inspired by this model (https://cults3d.com/en/3d-model/naughties/foreplay-dice), except when you try print text that is embosed to an angled side of the dodecahedron it looks like shit unless you make the dice really huge. Only…
This fox figurine captures the clever and agile essence of the fox, with flowing lines and a charming posture. Great for natural scenes, fairy tale dioramas, or as a lovely desk ornament. Printing : Works with both FDM and resin printers…
Find 3D-Printed RC cars here.
This marmot figurine features the round body, short limbs, and curious face typical of this alpine creature. It’s great for natural dioramas, educational use, or just as a cute collectible! Printing : Works with FDM and resin printers…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
This elk figurine captures the impressive size and majestic antlers of this iconic forest animal. Ideal for collectors, educators, and nature lovers. Printing : Suitable for FDM and resin printing Supports : Required under antlers, legs,…
Obiwan Kenobi Before and After : Force Ghost.
Cerf Foret - 5 layers (modular) Dimension of a layer: 90x1mm Support spacing: 5mm between layers Layer 0: bi-color - yellow / black Cerf Foret - 5 couches (modulable) Dimension d'une couche : 90x1mm Support espacement : 5mm entre les…
Bobina per filo da cucito, dimensioni 20mm x 18mm fori da 2,5mm
Boite pour ranger quelques forets sur un mur. Imprimé en PETG avec support pour les lettres
Lešij - Slavic forest demon, guardian of the forest (three colours) - 20 cm Wall art, matrix for graphics and frottage
Very Important - Print with glow-in-the-dark filament otherwise the warranty is voided! Layer Height = 0.2-to-0.3 mm Perimeters = 3 with scarf joints Infill = 15% Zig-Zag
I saw some other frames with the same idea but they all had 2 issues: (1) they covered up the State and lettering at the bottom of the license, and (2) they didn't enclose the license plate edges. This design provides more sturdy…
I have been looking for a Cell phone mount for my 2020 WRX for a while now. I have tried everything from the Suction cup to window, clip on air vent mounts, CD Player mounts, and one that Clips on to the Gauge Bezel cover. They are always…
This was a project I did for my neighbour's kid who had the handle (fore-end) of his nerf blaster-like toy. This fixed it and actually made it much better than the original was! I've included everything that I used including the .obj…
Hueforge settings .08 layers with a base layer of .16 Start with Black Change to dark grey at layer 9 (.8) Switch to light grey at layer 12 (1.04) Finish with white starting at layer 16 (1.36)
Use these covers to hide the ugly support brackets which are used on several models of Forest Drapery tracks. The bottom portion of the cover fits under the bracket against a wall which is screwed in place during installation. The top…
Introducing our newest creation: the Articulated Forest Dragon! 🐉 Embark on an enchanting adventure with our intricately designed 3D printed toy, perfect for young explorers and dragon enthusiasts alike. Now available in a convenient…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
Whole piece has slightly more flexion in the pinky than the split up version. Either one will need supports. Peg was designed for printing the model at full size. Base is if… I dunno, you want to remix into a lamp or something.
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
The source marked this model as adult content.
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
They may have taken down the Trump/Epstein Best Friends Forever statue, but now you can celebrate Friendship Month at home and make your own. Larger version of the statue STL available to download here:…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
You know what to do with this, no support is needed. will need screws and nuts.
Don't lose your head this holiday season. 💀 These print great without supports! More presents in store ;) ______________________ 19 days 'til Christmas!
An ergonomic angled foregrip.
This is a 300mm version of Zero. The body is hollowed out and runners have been added along the bottom to line it with LED light strips. I have added a hole in the back to accommodate a ½ in dowel rod with a handle that way when I “walk…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
The Shade Foregrip is a vertical foregrip designed for Nerf and Airsoft. This grip can be attached to Picatinny-Rails aswell as Nerf-Rails without any modification or adapter. Notches in the top allow the grip to be locked in different…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
Nightmare Before Christmas ornament Great as a gift, easy to print, no supports needed @3DPrintBunny
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
We're bust ing out the big toys now 🎁 Supports needed, but cleanup is simple The presents keep comin ;) __________________________ 18 days 'til Christmas!
All, this is not a remix of another's but was purely inspired from an online video short. Please go to https://www.printables.com/model/590620-brain-teaser-54-pcs-puzzle first before downloading this model. Her posting came before mine,…
UPDATE 19th Apr 2023: Body and Bracket have been replaced by reinforced versions. .stp has been updated too. Rest stays the same. This is the 45°Shade Foregrip an alteration of my vertical foregrip design. It has all the features of the…
First posted in 2017, this excellent 1/1000 scale 3D model of the iconic Titanic can now be printed in 5 colours with multi extruder printer or MMU / AMS single extruder system. I am not selling files for this model, I am selling the…
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
Mascaras de Lock, Shock y Barrel
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
So this is the Tone Foregrip. An angled foregrip along the same lines as my Shade Vertical Foregrip, designed for Nerf and Airsoft. The grip prints in four separate pieces, two for the body and two separate panels that can be customized…
I designed this smaller foregrip a while ago for a pistol I was working on. It is nearly vertical, at 83°. Use a 6-32 x 1.25" bolt to mount the Picatinny. The Mlok uses 2x 4mm x 20mm screws with mlok t-nuts. Update 10/25/2022: Added a…
Roblox The Deer 99 Nights in the Forest It is better to print in the original size or larger, as the fingers are very thin and it is difficult to separate the supports.
gives a curved arm blade to dummy 13
Forest spirit! NO AMS! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…
Print an ancient deep forest with gnarly twisted trees. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature…
Jack and Sally - Nightmare Before Christmas Wall Art
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
this is a robust foregrip/handle for picatinny rail
A version of the Tone Foregrip utilizing two bolts instead of one for a more secure connection. Functionality an design stays mostly the same as the original Tone. Bolts are again M5x30mm. Print Settings Printer Brand: Creality Printer:…
If you don't have your Halloween costume yet and if you are quick enough, you might even be able to print it before Halloween: ⭐ Wearable Jack Skellington Mask Or you can always wear a Santa outfit, and be a real life Jack Skellington for…
A simple model of Jack Skellington from The Nightmare Before Christmas as a christmas tree decoration Can be printed full on a multicolor printer or in two parts for single color printers The full version does need some light supports…
Source https://www.myminifactory.com/object/3d-print-mayor-the-nightmare-before-christmas-3543
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs I have also uploaded a Keymod AFG . Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG , which is an improved version of this one. I made…
A windstorm last year made my skeleton take a great fall, and a forearm mount was one of the casualties. I made a 3D-printable version so I can get him back up this year! Printing tips: Use PETG or a more durable material to avoid warping…
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
Please, post your makes!!! These little spirits are ready to bring a touch of Ghibli magic; simple, quiet guardians watching over your day.
Para los antebrazos hice las piezas.2x marco espi n,2x armadura de rodilla v2.stl
My version of Zero from The Nightmare Before Christmas
A Fully encased forearm and Shin for Dummy 13. New simple Look Fully covers arm/leg frames Snug fit (If print fails in the vertical position, print horizontally on the bed)
I enlarged animals stl to make them look like in the photo. I created PLA and PETG gcode for easy and faster print. I created this cute animals in Fusion 360, but they were small for flawless print. In Prusa Slicer I each of them…
this models are not mine, they belong to the game 99 Nights in the Forest made by the group Grandma's Favourite Games if you want to add your roblox avatar to the model, use the extended base and export your roblox avatar model from…
DungeonStick forest setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Mirror the designs to give you even more options. Three way couplers and end pieces included. Have fun building…
Version of the Shade Vertical Foregrip for M-Lok. Panels are identical to the original design. Update_28_FEB_2023: Slightly moved bolt holes so they're properly centered Print Settings Supports: No Infill: 100% Category: Toy & Game…
Foregrip Mag Carrier by Qwerm A picatinny mounted foregrip that holds a spare AR15 magazine. A copy of FAB Defense's MG-20. Included is an optional "Blocker" STL that can be used to change Cura's fuzzy skin settings for the finger…
Version 1.1 is live, featuring updated ergo, larger bolt compatability and fixed tolerances. Commissioned by @Thanhtacles Simple straightforward angled foregrip, modeled in the style of the popular Worker branded foregrip. Print…
A Nightmare Before Christmas coaster set. These were all done with manual filament changes. https://www.prusaprinters.org/color-print/ Coaster Stand Start - White 4.2mm - Black Zero Coaster Black - Start White - 5.6 All other coasters…
I just wanted to see if I can design this myself. I'd use ASA for practical use. You'd want high wall counts and relatively high infill so it doesn't just crumbles under load.
This Nightmare Before Christmas plate set includes a total of 5 plates to fit into our light and shadow box: https://www.printables.com/model/619326-light-and-shadow-box-simplified-version The colors we have used for the plates are as…
I've designed a compact insert for the boardgame Forest Shuffle, who fits the basegame and the first expansion with sleeved cards (I used docsmagic and swan panasia sleeves). The Insert contains of 5 cardtrays (3 of one type and 2 of…
The Wrist Roller is a simple yet effective piece of exercise equipment designed to strengthen the forearms, wrists, and grip. It typically consists of a handle with a rope or strap attached to a weight. The user holds the handle with…
Oogie Boogie from Nightmare Before Christmas Key Chain/Earring Included STL so you can remove the key ring hole. I made a large Oogie for Halloween decorations. I used 15% infill for earrings. If printing for a keychain, increase the…
I wanted to make a quick miniature base with a tree stump to add basing material to. For texture I'm using a mix of acrylic paint with pva, soil, moss and sand. The stump used is by 8BitAlex - https://www.thingiverse.com/thing:1276871…
Your favorite childhood dinosaur is back in PLA!
Print & acrylic draw
One is specifically made for the AR-15 Anderson rifle for more space when using a flashlight. The second model is compatible with all guns with the M-LOK mounting system. Print with supports. Infill 95%.
Large Nightmare Before Christmas silhouette ornament. No supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background. @3DPrintBunny
My takes on the Characters, NPCs and Creatures of Storm Kings Thunder are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
The grip is printed in two parts and clamps around the rail on the Longshot like the original grip. Printed without supports. Hardware: 3x M3x8 socket head screws
The “Bolter” Angled Foregrip for Picatinny! This Angled Foregrip features a more sturdy, higher surface area gripping surface. It puts a little space between your grip and the center axis of the rifle, which works particularly well with…
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
A forward grip for an AR-style rifle. Attach to your handguard using MLOK nuts. The 3MF file has modifiers to ensure 100% infill under the screw attachments. UPDATE (2026-03-29): I've added an unlabeled variant, as well as a HOG HEAD…
Jack Skellington Wall Art Nightmare Before Christmas Halloween Decoration I use 15% infill PLA I used an image I found online and designed the CAD myself. Included CAD should be scaled to fit your desired size/purpose.
I've adapted the smooth forearms of the eva figure to the vanilla one, also removed the blade on the back. It prints easily and looks a little more organic than the original one.
To assemble just look at the second picture, you print two cores, sandwich them together, put the sleeve over it and punch the pin through and then once its on the rail you can put the joined pins in to hold it in place
Life-sized Flexible Forearm 3D Model for Educational Purposes This stunning model of a flexible forearm is not only a technical achievement but also an outstanding educational tool for medical students, physicians, and 3D printing…
