Standfuss Sidewinder X2
Standfuss für den Sidewinder X2, kann auf die vorhanden Füsse aufgesteckt werden.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
- Downloads
- 195
- Likes
- 35
- Rating
- 5
193 models
Standfuss für den Sidewinder X2, kann auf die vorhanden Füsse aufgesteckt werden.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Intro: Living in a shared apartment space can be tricky when it comes to upkeeping basic cleanliness. This three-compartment rack helps solve an issue I had with my neighbors leaving their sponges/toothbrushes/soaps… everywhere, stuff…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
The foots for our coaster melted away. So I modeled and printed one. (unfortunately I had no black PETG)
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Diameter is about 18cm, real soccer balls are 21cm or 22cm. You need to print: - 1 x the ball with helper - 1 x pentagon with slot - 10 x pentagon - 1 x screwstand You need to glue the 11 pentagons, use the pentagon with a slot on top of…
Einfacher 40 Fuss Container für Modellbau oder ähnliches.
The mounting point tore out of the car mat. Made a replacement. Worked for the last 3 years (on my VW Golf 6). Material: PETG Orientation: both parts on the flat side Old New Works by friction fitting the mat material between the 2 parts.…
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
A print in place lint roller. (Fusselrolle) I lost my "real" one somehow, so I made a 3D printed one. It should fit the standard sticky rolls from the supermarket. (37,8 mm core). I desigend it with a bit of flex, so 1-2mm give or take…
A cable holder with which the cable can be routed along a baseboard. Designed for cable with 7mm diameter. Designed in Onshape:…
This model is a set of five templates to help you with fussy cut quilt blocks. They range from 2 inch to 6 inch finished size with ¼ inch seam allowance. Blocks are cut at 2 ½ inch to 6 ½ inch square. The templates are embossed with text…
Model of a werewolf skull to decorate, optionally with a stand, if not desired simply leave it out. printed with Prusa MK04 and Bambu A1 mini PLA supports: yes organic / only on plate Modell eines Werwolfschädels zum dekorieren, wahlweise…
Verbesserter Fuss für Omnistor. Der Splint ist nicht brauchbar, nur hier zu Verständniszwecken. Anstatt den Plastiksplint zu verwenden, einfach einen Hering reinstecken.
It fits a M10 screwhead very snugly, so no glue needed. I printed it with 10bottom layers for stability and 50% infill. Der M10 Schraubenkopf passt genau rein und muss daher nicht geklebt werden. Ich hab 10 Bodenschichten gedruckt und 50%…
Material: TPU 85A Füllung: 30 % Stützstruktur: nein
Remixed from https://www.thingiverse.com/thing:1460364 Just a knurling knob with a M6 screw and M6 nut. There is a solid layer for better printing, just drill it away and put the screw in. I also put a M6 washer under the screwhead…
Es kann sein, daß es da unterschiedliche Varianten gibt. Ich habe leider keine Teilenummer oder so. Ggf. mit Support drucken.
Watch the video on vimeo here: Hello together! As a co-driver, a car ride quickly becomes boring! But that does not have to be! This soccer game for the dashboard provides a remedy. The playing field is stuck on the dashboard of the car…
General I had needed adjustable feet for an IKEA Kalax. This is the creation, i have made. The thread is an modified M24x2,5 so its easier and better to print. I have printed it, without any issues with a 0,6mm nozzle by 0,3mm layerheight…
PLA flash difusser, uses existing hot shoe mount allow for normal flash deployment
gedruckt habe ich den Fuss aus TPU Filament, der Fuss kann ohne Stützstruktur gedruckt werden, Füllung 75-100% Ladder foot for a small step. for a square tube 30.4X20.5 the foot has a 10° or 15° and 20°degree incline I printed the foot…
Innen- und Aussenecken sowie Verbinder und Endstücke für Sockelleisten 20x40mm. Keine Lust gehabt für ein paar Gramm Billigplastik 3 Euro pro Stück zu zahlen, noch dazu war die Farbe nicht verfügbar, geschweige denn ein Mitarbeiter im…
Simple spacer/stand for Anycubic Vyper. This works only for older Anycubic Vyper. They build in the newer Version other stands. I got the Version “B”. i printed in PETG.
Um Kratzer auf dem Tisch zu vermeiden habe ich mir 4 Fuesse fuer den Dremel 220 Bohrstaender gemacht. Beider Teile werden einfach zusammengeclipst. Sie haben ein wenig Spiel, da der Guss leicht ungleichmässig ist.
Printed with PET-G. I used 4 perimeter and 25% of gyroid infill. works fine, but no warranty in case of accidents!
Replacement for FIAMMA No. 98673S204 + 98673A205 Settings: - PETG - 70% infill, Gyroid
Ein Einfacher Ständer für Tablets. Die Tablet Dicke kann 15mm sein.
This diffuser can be used with any air pump to supply oxygen or decorative bubbles in your aquarium. Ready to use with air hose 4/6 mm The best thing is that you can use cotton rounds eye makeup remover pads to renew the filter, which are…
I find the Fussy deodorants fall over very easily so I made a mount for them, there's versions for one or for two. I printed mine with no base and sparse infill so I could fill it with cement afterwards to weight it down, but it will…
Neue Füße für den Hauptständer einer Vespa PK50XL. Diese passen sicherlich auch an anderen Modellen. Gedruckt in TPU95A ohne Stützmaterial im Profil 0,2mm Structural. Viel Spaß beim Drucken! Wenn Euch das Modell gefällt würde ich mich…
Description Pedestrian Traffic Light Quick and easy to build - Snap fit - no screws needed Final dimension assembled: 4x4x15cm (LxWxH) Print No support Orientation as in the files Infill 15% Material: PLA Parts needed 1x WS2812 / Neopixel…
Neuhofer parts Parts for Neuhofer clik-fix 17 and FU123C Edge1: 46x46mm (20mm space to wall, 6mm fixation, 20mm overlapping) Needed material: nothing History Version 0.1.0 First published version and currently in use. Print instructions…
My father asked me to make some protective foots for the garden stools :) Category: Outdoor & Garden
Die Füsse meiner Leiter waren schon länger defekt, da mein neuer Drucker auch Flex Filament verarbeiten kann, habe ich die Teile kurz in Fusion360 gezeichnet gedruckt, und Sie passen perfekt auf die Leiter und meine Böden werden nicht…
Tastaturfuss für eine G15 Tastatur von Logitech. (Die Schräge Seite hab ich gerade gemacht)
Ich habe für die KTM SMCR 690 BJ. 2019 Stopfen für die Fußrastenhalterung entworfen. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
UPDATE V2 - 3.5.2024: Innenmaße vergrößert damit die Füße besser auf das Leiterprofil passen Kontur auf Anstellwinkel 65° - 75° ausgelegt Seiten geöffnet um Material zu sparen…
Simple Palette for transportation of my "Bauzaun" / Hoarding / Fence Bases in Scale 1:14 Fits for LESU Forklift and other Forklifts in Scale 1:14 Very easy to print, you can plug 12 of the Fence-bases on it. You can print the palette with…
Feet for the Ikea Kallax, use the original screws from Ikea to screw the feet on. Height: 16mm and 10mm strong outter walls. PLA (eryone) and 15% infill Print 2 of each .stl (for all 4 corners)
I have combined a Singer maschine foot with a hemmer. It works great. I inserted a nail into the foot as a shaft. Nail size: 1.5 mm thick and 15.5 mm long. Pressed in warm. The hemmer is glued on. Hemmer vertical print. I used PETG in…
Abdeckkappe und Standfuss für einen Stand-Ventilator. Category: Replacement Parts
When I first saw the gap under the screw of the fan cover on the FLSun V400 effector, I thought it was a perfect spot for a led that would show the printer's state, just like the ones on the voron hotends. I designed a mount/difussor for…
Einfache Endkape für die Füße eines Faltsignales (welche im Auslieferungszustand sägerau und nicht entgratet waren) wie es in unserer Feuerwehr benutzt wird. Bewusst etwas enger Konstruiert somit halten die Kappen durch Klemmung.…
Der Leiterfuss dient als Ersatz für einen defekten Leiterfuß für Leitern mit Traversen. ____________________________________________________ The ladder foot serves as a replacement for a defective ladder foot for ladders with trusses.…
My led essence diffuser lampshade got broken, so I took one of the hundreds moon models you can find in Internet and adapted it to my device. I resized the model to fit to the plastic adapter of the difusser. Its diameter ranged between…
This is a replacement foot for Nobilia kitchen cabinets in its high and low version. Most people will have the high version. Article No.: 99144 ; EAN: 4004539000117 It's very easily printed with PLA and PETG or any other material but TPU.…
Two foot caps as spare part for garden tables with a tube diameter of 28.1 mm or 28.5 mm. By scaling the model, other diameters can also be covered.Due to a small recess in the cap, it can be bend slightly, which allows a better grip on…
This is a replacement part for a Soehnle body scale. This is the scale foot. Fits perfect! I printed it in ABS and i added a rubber foot. Print the rubber foot in TPU and glue it on the bottom of the foot. This works with epoxy glue or…
Deckel für den Stewi Fuss (wenn er z.B. Opfer des Rasenmähers geworden ist ;-) ). Es ist eine einfache Lösung. Eventuell mache ich später noch ein paar Verbesserungen am Modell. Für den Moment reicht es so.
Check out this lint roller holder.
Leiterfuss Aluprofiel 21x68mm zum draufhauen !
Die Füsse meiner Leiter waren schon länger defekt, da mein neuer Drucker auch Flex Filament verarbeiten kann, habe ich die Teile kurz in Fusion360 gezeichnet gedruckt, und Sie passen perfekt auf die Leiter und meine Böden werden nicht…
Motivation The original ladder foot broke when I used the ladder on a cold day and pushed the ladder forward with my foot. The replacement parts on A****n did not look any better to me and I did not want to replace the broken foot by…
Ständerfuß als Alternative für das käufliche Gummiteil. Letzteres habe ich zweimal gekauft und ruckzuck war es jedes Mal hinüber. Ein Freund hat mir das Teil dann in PLA gedruckt. V2 habe ich nicht ausprobiert, sollte aber besser am…
The parts are a little messy… But i used all of them and a lot of glue.
Ein Schild, welches ein Piktogramm eines Fussballspielers aufweist.
Unsere 3 Stufige kleine Haushaltsleiter hat einen Gummifuss verloren. Zeit, das mit 3D-Druck zu lösen. Dieser Ersatzfuß ist für ein Alu-Profil mit Abmessungen 21,5 x 35 mm designed. Die Neigung der Leiter ist 20° aus der Senkrechten.…
I'm using Polymaker's Polydryer for drying and storage of TPU filament. I was looking for a solution that keeps Polydryer's perfect seal in storage while minimizing the fuss between storage and use of the filament. Since I'm using the…
The plastic base of my stool has completely disappeared into the chair leg. So here is a base that I designed using Tinkercad. I actually made it for a different chair. It works for all chairs or tables that have a round tube as a leg. In…
Standfuss für Vierkantrohr 20 x 20 mm. Ideal für das kleine Bastelprojekt was nicht direkt auf dem Boden stehen soll.
Damit meine Engel Kühlbox MR040F nicht direkt auf dem Boden steht und eventuell Feuchtigkeit vom Rasen mitbekommt habe ich Füße konstruiert, die erstens die Box auf Abstand zum Untergrund halten und zweitens einstellbar sind. Die Füße…
Leiterfuss passt für Alu-Rohre beidseitig rund. OpenSCAD-Datei kann parametrisiert werden. Print mit TPU - Up-side-down (Öffnung nach unten), ohne Support
Print Settings Rafts: No Supports: Yes Resolution: 0,3 Infill: 10% Notes: Support in der Bohrung entfernt.
ReadMe.txt Gummifuss fuer Anycubic i3 Mega Anwendung: Dieser Gummifuss dient der Geraeuschdaempfung meines Anycubic i3 Mega Druckers. Es werden 4 Gummifuesse benoetigt, die unter die normalen Geraetefuesse gelegt werden. Ziel soll es…
This is a stand for a single Fussy style deodorant case. Minimal on-bed supports and a brim advised. Prints great with PLA, and PLA CF.
Universal-Fusselroller Für alle Fusselrollereinsätze bis zu 50mm Durchmesser und 130 mm Länge. Der Griff ist als "print in place" konstruiert. Die Abstände sind auch für etwas ungenauere Drucker größer gestaltet und daher sollte es für…
Standfuss zum anklicken an den Bilderrahmen SANNAHED von IKEA um diesen vor kippen zu sichern. Speziell wenn ein gravierter Spiegel zum hinterleuchten in den Rahmen eingebracht, oder auf dem Rahmen geklebt wurde.
Foot for stacking 2 Hoymiles MS-A2 batteries. 4 of these feet are screwed to the upper battery using the existing rubber feet. The upper battery can then rest on the stable edge of the lower battery. Please note that the WiFi reception of…
Printed with PLA. Place the cover on to the buildplate, so no support is needed. No infill inside walls (increase max wall line count, until no infill is generated)
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Der 3Dino Hygrometer Standfuß dient als Ständer für die Hygrometer, welche online erhältlich sind. Mit dem Hygrometer kann so die Feuchtigkeit in der Filamentbox gemessen werden. Bei Bedarf kann die Feuchtigkeit anschließend gesenkt…
Parametierbarer Ersatzfuß für Klappleitern mit 4-Kant Rohr. Der Fuß kann in Fusion 360 über die fx Parameterfunktion angepasst werden.
Resized to 85 mm with an 8 mm bore to fit a very small table.
Druck - L- 0.15 mit Supports / 15 % Infll Für Ruhe und Enstpannug beim Druck sorgen diese Federgelagerten Füsse. Für unseren Teil senkt man den Geräuschpegel / Vibrationen des Druckes um ein Vielfaches. Ferdern sind unter folgendem Link…
Diese Beifahrer Fußerhöhung hilft kleineren Menschen auf dem ATV TGB Blade 1000 seine Füße aufzusetzen. Habe die für meine Frau entwickelt, um eine entspannte Fahrt für sie zu gewährleisten. Die Teile kosten euch nichts (die Dateien). Ich…
Einfache Abdeckung für den fuss eine Boden montierten Heizung mit Zapfen Verbindung über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Eine Fusskappe für nivtec Bühnenpodest Füsse.
Ich habe das vorhande Teil auf meine Leiter angepasst, dann habe ich das Teil in Extrudr Flex Hard gedruckt, wegen dem Schraubenloch sind es 2 Teile links und rechts. Desweiteren sind 3mf und Step Dateien hier so das ihr das problemlos…
https://www.amazon.de/gp/product/B09PV85CKT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 Material ABS Layerheight 0.3mm
had to renew the feet on my garden table
Standfuss für Gasbrenner ( GB-2001 ) aus dem letzten Jahrtausend ( Ca. 1992 ) - Guter Stand - Satte Klemmung - IDØ 36mm ( 1992 ) - In “jedem” Winkel verwendbar - Bohrung zum Wiederbefüllen - IDØ 15mm Apropos Gas-Brenner: Ü30 und läuft wie…
Für einen Tisch habe ich eine Möglichkeit gesucht verstellbare Füße mit einer M16 Schraube zu realisieren. Hierfür habe ich den Aufsatz entwickelt. Mittlerweile habe ich den Aufsatz auch an einigen Maschinen in der Werkstatt verwendet.…
Circular adapter for a Nikon microscope stage. The adapter features a hole for a coverslip (60x24 mm would fit), with lose fitting, and an imaging area in the centre. This was design to use with magnets of size ~0.95x0.45x1.1 mm, that are…
Bei einem General Austausch aller Heizkörperthermostate (Heimeier) wurde auch das Thermostat für die Fußbodenheizung ausgetauscht. Leider passt danach die Original Blende nicht mehr, da das Homematic IP Thermostat größer und rechteckig…
Hier meine Version vom Kettler Tischfuss. Bei uns ist über die Jahre der Fuss kaputt gegangen. Also neu Designed und dann gedruckt. Tip Top
Im Prusa-Slicer lässt sich der Text entsprechend anpassen. Bei 4mm ist ein Farbwechsel in der Projektdatei eingefügt. So kann man mit z.B. weißen Text auf der schwarzen Platte drucken.
Drehscheibe für Busch Jäger Fussbodenheizungs-Thermostat
ABS, 0,20mm, 40% Füllung, Gyroid Muster, Stützmaterial an
Rohrschelle für HT Rohr d50. Die Rohrschelle steht auf dem Boden auf und besitzt Bohrungen um diese zu Verankern.
Standfuss für Anycubic Kobra Max Gummi gedruckt mit TPU
Ersatz für zerbrochene Kunststofffüsse einer faltbaren Dachbodenleiter mit 20x40mm Holmen
Als TPU 95 gedruckt in dichte von 70-90 Prozent, geeignet für Druckerfuss für Squashbälle halb und ganzer Ball.
This is an LED diffuser for 2020 profiles for 6mm wide cob strips for my 350mm voron 1.8 but it works for most printers, it is composed of two 200mm parts so it can be used in smaller printers or join more pieces . Each piece is anchored…
Fuss für die 40x40 Aluprofile. Sitzt recht eng, ggf muss man je nach Filament etwas nacharbeiten. Da es mehrere 40x40 Profiltypen gibt, passt es vermutlich nicht auf alle. Passend zu Profiltyp im Foto.
🇩🇪 Unser Hauck Treppenhochstuhl Alpha hatte einen sehr harten und kratzigen Plasitkfuss der unseren Laminat ganz schön strapazierte. Deshalb habe ich mit Blender einen neuen entworfen und mit TPU gedruckt. Die Füße lassen sich ohne…
Ein fester Standfuss für die Batterie (BA00130) vom Qwic e-bike. Damit hat man dann auch wieder mehr Platz auf dem Tisch oder wo auch sonst die Batterie geladen wird.
Tannenbaum Fuss für einen Bausatz der Frirma AZ-Delivery. Dieser Tannenbaumfuss ist 3 teilig konstruiert. Man montiert die Teile direkt übereinander. Ggf müssen noch ein paar Löcher gebohrt werden. Oberseitig wird dann der gelötete…
A custom-designed floor protector for round metal table legs. This cup prevents scratches on hardwood or tile floors and reduces noise when moving furniture. Designed with a slightly snug fit to stay attached to the leg. Diameter 42mm.