1,155 models
Google Nest Mini 2nd Generation Wall Plug Mount. Only tested with US power supply. Enjoy
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Edit 06.05.2023 : Added STL with 0.2 tolerance on all dimensions I couldn't find a pixel 7 case thin enough for my taste so I decided to model one (with my very limited ability to do so). There is two versions, one flat around the screen,…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. Might need to be scaled slightly to fit smaller buildplates. If anyone has any questions please contact me, THop3D
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
This is a very simple remix of Franco 's very elegant design of a wall socket mount for the Google Nest Mini 2nd generation. Instead of securing the cable with a separate back plate, I added three little “hooks” to retain the cable…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
I really liked the R2D2 designs that hold the Google Home Mini, the one that I liked the most was pbechard remix that has a tilt forward so we can see better the Google Home Mini. One thing that I noticed was that this model had some…
Print approx. €9.48–€11.58 excl. taxPreliminary estimate for one variant
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Got a need to mount a Google Nest Hello by your front door, but the wall where your doorbell currently lives is perpendicular to the door? Well, this mount is intended to give the camera the ability to crane it's cold glass eye around for…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
Same as the original of CdRsKuLL, but improved by adding print files and adaptive smoothing on all parts. Print instructions All sliced for the MK3. No supports needed.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Nothing more annoying than not having internet when you look something up on Google. What do you get? A dinosaur to play a game with. I had used this opportunity of no internet to read another book. But yes soon I found out that I had no…
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
15% infill .1 Layer height Organic support
Print approx. €13.72–€16.77 excl. taxPreliminary estimate for one variant
This is a shelf designed to hold a Google Wifi router. So that it has a place to live in places where you don't have any furniture to put it on (e.g. a corridor). It is installed between the wall and the socket plate thanks to the…
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for PETGSource material: PET
Very useful in a room where there are no supporting surfaces, such as in the bathroom Supports only from the print bed Infill 15%
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Introduction Social bookmarking sites allow users to save, organize, discover, and share web pages online. For SEO professionals, marketers, bloggers, and website owners, these platforms can also support content discovery, referral…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant
The pedestal angles the Google Home/Nest Mini (gen1 and gen2). In certain cases this improves on the sound of the speaker while also improving the microphone reception. The connector is routed inside the base and connects with the Mini…
If I could trouble you to hit the Like button, I'd really appreciate it. Flexible for TPU, etc., and Rigid for PETG. This is a pretty snug fit, so PLA might not be a great choice for this. 11/10/2022 - minor accuracy updates 11/10/2022 -…
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…
Spacebar keycap made to work with cherry mx switches and a light-up keyboard. Edit: I've added files for a version with a flat top, meaning it will be a lot easier to print, especially with MMU. I've also edited the design to be a bit…
I don't actually own one of these, so I'm going by user feedback. Please see the comments for the latest status. The scaling issue should be fixed in these latest models. Dimensions tweaked slightly for better fit. Made some tweaks to the…
01/02/2025 - Added optional Kickstand version. This is meant to be printed using flexible filament (eg. TPU 98A). I don't actually own one of the devices, so please provide feedback. My personal preference is to turn off top and bottom…
I don't actually own one of these, so I'm going by user feedback. Please see the comments for the latest status. The scaling issue should be fixed in these latest models. Dimensions tweaked slightly for better fit. Made some tweaks to the…
This is the dino from the offline google dino game, but 3D! I made it in tinkercad, but added a bit of bevel in blender since it cut me multiple times and even awarded me with an infected wound. Most recent update here: I added a cactus!…
Slightly over engineered stand for the Pixel Watch 2 & 3. But I like it :) Happy printing :) EDIT 2023-10-13: Added a mirrored version for all who are using the watch with the crown on the left side
I don't actually own one of these phones. If you get a chance to try it, let me know how it goes. My personal preference is to turn off top and bottom layers and use a 19% honeycomb infill, see screenshot.
Wall mount for Google Home Mini. You can use two screws or tape. Print instructions PLA Infill 15%
I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
I don't actually own one of these, so please let me know how it fits. My personal preference is to turn off top and bottom layers and use a 19% honeycomb infill, see screenshot.
These cases are meant to be printed using flexible filament (eg. TPU 95A - 98A). My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot. 8-30-2025 - Added optional kickstand versions…
01/02/2025 - Added optional Kickstand version. This is meant to be printed using flexible filament (eg. TPU 98A). My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot. 02/11/2025 -…
This is meant to be printed using flexible filament (eg. TPU 98A). I don't actually own one of the devices, so please provide feedback. My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill.
When I got my first 3D printer last year I wanted to learn to model in Fusion 360 and print useful stuff while also learning the capabilities and limits of FFF printing. So, in this design I was intentionally playing with overhangs and…
I really liked the design of PancakeLegend's stand for the Google Nest Mini. I printed it out, only to realize that I have a Google Home Mini, the predecessor to the Nest Mini. The Home Mini uses a Micro USB cable that doesn't fit the…
Google Nest Hub Wall Mount, was created because I was missing a holder that was angled, so Google Nest Hub becomes more straight with the wall. And as a new thing, der is on the 2.0 version now made at cut out for the speaker…
Printed this years ago and is still one of my favorites! Thingiverse user Yelt
I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…
Google Pixel 7 Pro Bumper case the same as Rhinoshield made 5 years earlier, I really wanted to have the same awsome thing they made for my pixel 3. The fit is really thight, if printed with PETG I recomend to scale it up 0,5 % or 1%…
This is a cool model of the Google dinosaur, this is the not flexi version check my profile for the other version. Other versions: https://www.printables.com/model/762108-valentinosaurus-rex-google-edition…
A 3D-printable housing for your Google Home Mini smart speaker. Gives it some extra character and a modern look. UPDATE 3/13/2024 Added 6x3mm magnets to attach the pieces, and increased the size of the hole for the cable. New files are…
I removed the extra objects from the model.
An Owl bookmark with google-eyes. No supports, minimal infill. Fast to print! Use self-adhesive 12mm google eyes to complete the model. Updated 1/20/23: added a model that uses 15mm google-eyes. Updated 4/16/23: added a supersized model…
A wall mount for the Google Home Mini, I designed for friend. It is a simple ring, which fits over the home mini and is then screwed to the wall in order to hold it in place. Print upside down, with the ring lying flat on your print bed.…
Vintage Jukebox cover for Google Home Mini & Amazon Echo Dot (experimental) Wurlitzer (for those who do not know) is the oldest and the most popular brand in jukebox sector. Actually there is no such a jukebox in real world and virtually…
This is a common problem for Google Pixel 7 Pro phone (Volume button fells off) Google community thread https://support.google.com/pixelphone/thread/190978264/pixel-7-pro-volume-button-fell-off?hl=en XDA thread…
Simple Case for the Google Pixel 5.
These cases are meant to be printed using flexible filament (eg. TPU 95A - 98A). My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot. 8-30-2025 - Added optional kickstand versions…
A simple way to hang your home hub on a way, using two screws.
A Google Nest mini holder Works for the original mini as well!
Just a simple charging stand I made for the Pixel Watch. No Supports needed.
A stand put the Google Nest Mini in an upright position on a desk or shelf. A small print, but fairly stable. The g2 has a notch to retain the cord. I have printed this model standing without support, but you may wish to use support for…
The original hole for the charger was a little too tight, so I opened it up an additional 1.5mm. Much better fit for me
Google Home Mini Mount for IKEA Skådis (Remix – No Support Needed) 🔧 Remixed and optimized mount for the Google Home Mini – now support-free and Skådis-compatible. I wasn’t happy with existing Google Home Mini mounts for the IKEA Skådis…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a simple watch stand for the Google Pixel Watch 2. The charging puck snaps right in, no adhesive necessary, and a hole in the back allows removal. Cables are fed through a channel down the bar and to the back. Print as is in the…
Google Sphere Mini - A Stylish Upgrade for Your Google Nest Mini / Google Home Mini Introducing the Google Sphere Mini, a chic and innovative enclosure designed to enhance the appearance of your Google assistant while improving its sound…
Printed in PLA.
I wanted an Atlas holding a Google Mini, and I couldn't find one. I don't know how to do 3d modeling, so I just combined existing models in Prusa Slices with some slicing and negative volume objects. Added some support enforcers, so you…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: This is a remix of Ed 209 from Robocop by GHathaway. Thanks for such a…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I just installed the new Google Nest Thermostat and needed a trim plate to cover the holes from my old thermostat, Fusion 360 to the rescue! This is for the NEW Google Nest Thermostat found here not the Nest Learning Thermostats. Update:…
This is a Remix of Google Pixel 9a Case by gleonard3 , using a rigid filament instead of TPU. For a good blend of rigidity and grip, consider printing with zero bottom layers, 2-3 top layers and honeycomb infill >18%. Experiment with…
5% support infill 20%-35% infill 1.6mm layer height
This is smart speaker mount designed so you can plug in other devices at the same time. IMPORTANT There are 2 versions of the google home. If the charger is a barrel type download the nest version, if it has a usb micro port use google…
The EU power plug on the Google Nest Mini would not fit in the original version of this mount, so I made a small adjustment. Cut a hole in the ring where the power plug goes so it can expand just a tad to accomodate the slightly larger…
Google Nest Hub Wall Mount, was created because I was missing a holder that was angled, so Google Nest Hub becomes more straight with the wall. New version https://www.printables.com/model/279942-google-nest-hub-wall-mount-v20
A holder I whipped up for the Google TV remote for the Chromecast with Google TV HD 4K that we picked up.
Mount your Chromecast with GoogleTV remote on a wall or the side of some furniture with this minimalistic mount. The remote slides in snugly without any unnecessary friction. Designed with a flat back to be attached with some double sided…
Its a case for the pixel 6a, print it, preferably out of tpu for best protection and fit, and put it on your phone. There are 2 versions, one with cutout in the back, for better grip, ventilation, weight savings and style as well as a…
Google dinosaur world to recreate in real life! Fits great on the IKEA KURA bed.
For those who wanted to mount their Google Home or Nest Mini to the ceiling, under a board, or to the wall: here you go. It's a little tight to push it in, but it won't fall out for sure. Best tilt it a bit when sliding it in. Fits all…
Small Google Pixel 8 Case I printed it with adaptive layer height and tree supports.
A lens cover to protect your DJI FPV goggles. Fits well into V1 and V2 of the FPV goggles. Print in TPU, doesn't matter
A simple remix to print without supports...
I remixed CaiotE's Tie Fighter Echo Dot 3 model to work with the Google Home Mini, I used Pawpawpaw85's Google Home Mini Slim Wall Mount as inspiration for the clip. Here's a clip of it "in action" https://youtu.be/jrTlMt-Rjg8 Category:…
From thingiverse https://www.thingiverse.com/thing:5636189
Printed with generic PTEG at .2mm layer height took about 1 hr on older machine. 3D printable wall mounted bracket designed for the new google tv streamer 4K (as of November 2024):…
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
This is the google dinosaur! If you like this model, please consider hitting the thumbs up button! Its greatly appreciated! and also if you want the alligator model click here:…
This Case is designed as flexible Bumpercase to protect your Google Pixel 6 against minor impacts and hits. The backside is as thick as the camera kit protrudes, so you have a homogeneous flat surface. It has cutouts for the speaker /…
Sometimes you really want to be offline, and a videogame isn't enough: you have to be really disconnected. That's where this Jumping Rex comes in! It's a print in place physical remake of the iconic chrome's running dino: no assembly or…
I saw someone else that made a remix of this one that had a better fit then the original but didn't want to share the STL's so I made my own one! Added some other improvements to like: No support needed Legs and bell pins are separate…
My wife hated the shocking white bezel on the Google Nest Hub. I actually agree. Looks like an old Samsung tablet. Who wants that relic displayed prominently in the house? My first thought was black electrical tape, but I figured I'd give…
Model is a working progress, have to test fit my own Google Home.
Absolutely no changes made from the original design other than hollowing out the body to print with less material. (I suppose you could store something small under the Home as well.) Still supports fine and looks awesome! Print…
This is a firm fit Google Home Mini stand to mount on ceilings or under the shelves. Once fit, it's very firm and can never fall down. To fix it on the ceiling at least two screws are recommended (holes are 4mm wide). Print Settings…
A more enclosed version of a linked file
This is meant to be printed using flexible filament (eg. TPU 98A). I don't actually own one of the devices, so please provide feedback. My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill.
Low-profile Google wifi wall-mount with optional cable winder. It's designed to be attached with a common generic screw. If you don't need the cable winder, you can print the wall mount alone. There are two versions of the cable winder,…
For an even better fit and some additional padding, I lined the inside edges with a few strips of electric tape. It really makes a huge difference!
A quick, printable way of shifting your wired Google Nest Doorbell out of the way of a wall or doorway. With the doorbell's wide FOV, you'll be able to see it all. This is a Google Nest doorbell adapter for the wired, second-generation…
A 3D-printable case to make your google home mini look like a turtle. Used the Google Home Mini model by max dahl as the reference model, but had to scale it up by 1.11435 Print Settings Printer: Prusa Mini Rafts: Doesn't Matter Supports:…
This is a cool model of the Google dinosaur, just give it to your kids when they are bored and you won't see them for hours. just print it how ever you like, you can scale as you wish! Although I don't recommend going smaller that the stl…
ONLY WORKS WITH NEST MINI (HOME MINI 2ND GEN) Home Mini 1st gen plug is too small to stay fit on this print. How to know what model you have: Nest Mini (Model H2C, round connector) has a screw hole mount on back vs Home Mini (Model H0A,…
The back needs a little bit more space so the cable can go through the hole. It is just a merged model so you can scale ATLAS so the hands helps holding the google home, but it works jut fine because the holder is tilted to the back The…
Wanted a phone case for my Pixel 6a that would also have a recess for a wireless charging adapter so there is no buldge under the phone, so I designed one. The shell is 1.5mm thick. Recommended settings : 0.25mm first layer height, 0.2mm…
A simple light phone case “rubber bumper” style. Thick enough to absorb the bumps. Minimal and light. Thin enough to charge wirelessly. Verified fit, works well. Version 3.3 and later add handgrip notches, and has a less pronounced lip on…
I received a shiny new Google Home Hub (Now known as the Nest Hub by Google, same thing) and I wanted to immediately mount it in my kitchen under my cabinets so I can use it as a recipe / music / news / video device. Unfortunately the…
I know, used keyboards are disgusting to take pics of, but its needed to get the idea of the print. Anyways, I redrew and extruded out the original design graphics so that the key can be used for multi-color and printed face down. I used…
Wall mounting bracket for a Google Nest WIFI pro-6e. Mounts to the wall using qty 2 #10 screws. The one shown is PLA, 3 walls, 15% infill. Facilitates the storage of excess power cord.
![[REMIX] Google Home Mini Stand](https://media.printables.com/media/prints/330090/images/2847311_97babfc6-d4ef-4cc6-a86f-bda49672447e/home-mini-01.jpg)
