Google Wifi UK socket mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.93 – €3.59 net (excluding VAT)
For file: Google Wifi UK socket shelf v2_0.2mm_PETG_MK3S_3h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.26 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 3.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a shelf designed to hold a Google Wifi router on a UK socket.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 1
- Views
- 454
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a shelf designed to hold a Google Wifi router. So that it has a place to live in places where you don't have any furniture to put it on (e.g. a corridor).
It is installed between the wall and the socket plate thanks to the existing socket screws. BEFORE installing, make sure you've switched off the mains power to the socket.
This was designed for MK single sockets (round angles at the bottom).
The fixing centres for the screws are standard for all single sockets, so you should be able to install this shelf on any single socket.