Search results: grit

Sort order

288 models

P
PrintablesPuhsketti

"Floating" tensegrity table with built in tensioning mechanism

A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…

Downloads
3,735
Likes
267
Rating
4.79

Car Wash Grit Guard for 5 gallon bucket from home improvement store

When you wash your car with a bucket of soapy water, the dirt that comes off the car ends up in that bucket. This grit guard captures that dirt and keeps it from getting back on your sponge and scratching the paint. It was inspired by the…

Downloads
1,788
Likes
297
Rating
4.92
P
PrintablesFotoman

2 inch Sanding Disc Organizer for 6 Grits

An easy way to organize your 2 inch sanding discs. Holds 6 grits.

Downloads
115
Likes
18
Rating
0
P
Printables3DJG

Heart Tensegrity

Love is the most fragile balance in life. They often depend on a thread and must be treated with great care so that it does not break. Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. The…

Downloads
58
Likes
7
Rating
0
P
Printables3DJG

Lucky horseshoe Tensegrity

I hope riding this tensegrity brings you good luck, pal! Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. The pieces fit together tightly, but depending on printing tolerances you may need…

Downloads
49
Likes
8
Rating
0
P
Printables3DJG

Cupid Arrow Tensegrity

Love is the most fragile balance in life. They often depend on a thread and must be treated with great care so that it does not break. Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. I…

Downloads
32
Likes
3
Rating
0
P
Printablesrcmz

Print In Place Tensegrity

Here is my take on the tensegrity table, a print in place version ! To tension the mechanism, turn the little nobs in the center using pliers I recommend printing the file with built-in support, they are very easy to remove Printed fine…

Downloads
38,010
Likes
10,022
Rating
4.62
P
PrintablesM4NU

Dual Tensegrity - Connected Structures

These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…

Downloads
2,444
Likes
421
Rating
5
P
Printablesalecs.form

Tensegrity hexagons

Tensegrity Hexagons. Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for…

Downloads
1,846
Likes
517
Rating
4.94
P
Printables3DPrintBunny

Tensegrity print in place

This is a print in place tensegrity structure that is held in place by 4 strands of printed filament. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you…

Downloads
1,348
Likes
234
Rating
4.86
P
PrintablesTritschi

Risk Free Tensegrity (environmental friendly)

I printed rcmz's print-in-place (PIP) Tensegrity. Thanks rcmz for sharing this fantastic model! My PIP outcome was pretty humble due to shitty filament, maybe also due to sub-optimized parameters. But throwing 400grams of material with…

Downloads
1,252
Likes
174
Rating
4.6
P
Printables3DPrintBunny

Hexagon tensegrity table print-in-place

A tensegrity print-in-place table that prints without supports. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be able to see the single strands of…

Downloads
1,231
Likes
322
Rating
4.58
P
PrintablesFlux Studio™

Tensegrity

✨ Tensegrity Structure Model – Ready for 3D Printing ✨ This model is based on the principle of Tensegrity (Tensional Integrity), which uses forces of compression and tension to create a striking visual illusion of levitation. The rigid,…

Downloads
1,071
Likes
267
Rating
4.75
P
Printables3DPrintBunny

Halloween Spider Tensegrity Ornament

A Giant Spider Tensegrity Ornament When printing use the 0.3mm layer height and make sure ‘detect thin walls’ is checked. When sliced you should be able to see the single strands of filament and there should be no empty layers. Any…

Downloads
1,026
Likes
361
Rating
4.88
P
PrintablesFritoBandito

205mm Grit Guard

A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing…

Downloads
924
Likes
82
Rating
4.8
P
PrintablesOpenFabPDX

Chicken Grit Feeder

It holds grit for your chickens and mounts with zip ties. Prints with no support. Chicken approved. V2 grit feeder is shorter and broader with a larger opening to perhaps accommodate oyster shells or larger grit. I haven't tested oyster…

Downloads
823
Likes
204
Rating
5
P
Printablesalecs.form

Tensegrity arc

Tensegrity arc. Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for…

Downloads
797
Likes
210
Rating
4.88
P
PrintablesSeabird HH

Magic Hands - Tensegrity

"Ebony and Ivory" … live together in perfect harmony! This is already my fifth contribution to the topic "Tensegrity" here on PP. I like this one best! This object is not about a function that is to be fulfilled (carrying a table top or…

Downloads
646
Likes
101
Rating
5
P
PrintablesObliviousOrange

Longer Tensegrity Planter

I thought a longer model would be easier to fit a bigger plant, so that's what I made (it also looks cooler). Now I don't know how watertight the little planter cup is supposed to be, so I printed it in resin. Unsure what FDM material…

Downloads
640
Likes
177
Rating
5

Mark4 5"inch frame by RobertGRitz

Hope you enjoy! Will be building myself soon!

Downloads
632
Likes
18
Rating
5
P

VGA Plug for (Gritin) USB Cable

These are the cables that I use: https://www.amazon.de/gp/product/B0778FV6K4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Added a minimum amount of support material in the GCODE files. Printed fine like this and it just snaps together,…

Downloads
527
Likes
156
Rating
4.9
P
Printablesmobiobi

Tensegrity Harp & Lyre Print in Place

Was going for a more striking yet stylish model to show off what can be done with a 3d printer. Designed for 0.3mm layer height, as the strings are 0.4mmx0.3mm. Probably won't scale well, but might be possible. Just need to watch the…

Downloads
519
Likes
79
Rating
4.67
P
Printablesswissbear

Tensegrity Stand

A small tensegrity (Tension-Integrity) study. I redid the CAD files from scratch to make it more stable and printable. Print instructions Print once or twice, scale to fit. If printed twice, the same sized parts can be put together.…

Downloads
518
Likes
48
Rating
4.89
P
PrintablesHank

Winged Dragon Tensegrity

This is a remix of the Low Poly Tensegrity Dragon by Mochi115 . I liked the concept of the tensegrity dragon with one tension and two support elements. I made the following changes Modified dragon model Eliminate need for supports Add…

Downloads
510
Likes
187
Rating
4.4
P
Printablessermelo

Fully printable Tensegrity

Fully printable tensegrity, no strings needed. It hasn't been designed to support any weight, however it is OK to put some grams on top(see image). If you are interested in adding some weight, message me. I may be able to improve the…

Downloads
471
Likes
66
Rating
3.75
P
PrintablesSanford Prime

Triangle Tensegrity

This is the third part from my deep dive into tensegrity models. I still have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them all here when I can. I find things like this fascinating. At first glance it…

Downloads
464
Likes
70
Rating
4.8
P
PrintablesS. Stobbe

Chicken Grit Feeder

Chicken grit feeder with quick release mounting for easy refilling and cleaning and lid for water and dust protection. Might also be used for other feed. I recommend printing the feeder with supports.

Downloads
463
Likes
79
Rating
4.67
P
PrintablesFab3D Udesc

Stable tensegrity table (impossible table) for laser cut

This is an SVG vector file for laser cutters to assemble a tensegrity table, aka an impossible table. Use nylon fishing line or any other strong thin thread to assemble.

Downloads
410
Likes
22
Rating
0
P
PrintablesCarsten

"Anti-Gravity" Structure - Tensegrity

Tensegrity structure. https://youtu.be/Lo\_Qxrsz824 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4x0.2mm Filament: Prusa PETG Galaxy Black Category: Physics & Astronomy

Downloads
404
Likes
61
Rating
4.75
P

Car Wash Grit Guard for 5 gallon bucket with center foot

This grit guard is designed for placement at the bottom of a standard big box store 5 gallon bucket to capture dirt and prevent scratching while washing your car. This design is a remix of @CherryPickerSocerer's grit guard, which was…

Downloads
391
Likes
89
Rating
5

Tensegrity

Slots for the strings make this super easy to put together. It will sit flat because knots fit inside the parts. You can print both parts together at the same time. Support material is not needed. You can use a variety of string lengths.…

Downloads
375
Likes
45
Rating
5
P
Printables3DPrintBunny

Tie Fighter inspired tensegrity table

A Star Wars Tie Fighter inspired tensegrity print-in-place table that prints without supports. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be…

Downloads
357
Likes
145
Rating
5
P
Printablesdeanmford

Tensegrity table, separate chains, no support, no screws, no glue

I loved the original print in place. Try it. But this one is fun also. If printed at the supplied size, use layer thickness of 0.2 mm, especially for the chains. You will need 4 of the long chains. One short chain. Print the platform and…

Downloads
356
Likes
37
Rating
5
P
PrintablesSanford Prime

Tensegrity - Spiral

Hello Everyone, This is the second part from my deep dive into tensegrity models. I still have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them all here when I can. I find things like this fascinating. At…

Downloads
324
Likes
67
Rating
5
P
PrintablesChris Hill

Bucket Grit Guard - Configurable

This is a ‘grit guard’ that will stop your car wash sponge picking up grit from the bottom of your bucket. It uses a hexagonal mesh because Hexagons are the Bestagons! Two STLs are included (flat mesh and deep mesh) but you can use the…

Downloads
324
Likes
39
Rating
5
P
PrintablesLilMikey

Car Wash Bucket Grit Remover

So... a legitimate grit guard will likely run you less money than the cost of the filament to print this one and with Amazon Prime you'll likely receive it before this print would complete. However I'm sure someone will find themselves in…

Downloads
301
Likes
39
Rating
5
P
PrintablesJohan

Magnet tensegrity sculpture

Introduction I've always been fascinated by tensegrity structures and when a magnet design flash contest was announced I thought it was a good opportunity to explore this fascinating concept further. The model I came up with is a simple…

Downloads
292
Likes
240
Rating
0
P
Printablesliftbag

Remix of "Floating" tensegrity table with built in tensioning mechanism (glued version)

I did this remix to avoid the use of screws and nuts, except for the tension M3 screws. Small adjustments here and there: various rounding, sacrificial bridges on the top table, modified thread paths to facilitate tensioning. The shuttles…

Downloads
278
Likes
22
Rating
4.25
P
Printables3DPrintBunny

Dancing Skeleton Halloween Tensegrity

Print at approx. 0.3mm layer height with detect thin walls checked

Downloads
269
Likes
75
Rating
5
P
PrintablesIangenuity

Tensegrity!

A tensegrity model that can be printed without supports. I included the source files if you would like to edit it. Assemble using fishing line. I recommend the two half hitches as a knot as it can be tightened after tying. Remember to…

Downloads
268
Likes
31
Rating
5
P
PrintablesSeabird HH

"Hot End" Tensegrity

"Hot End" is the name given to the nozzle on the 3D printer because it can get up to 260° hot during the printing process, depending on the type of filament. These nozzles have different outlet diameters and should be replaced from time…

Downloads
260
Likes
36
Rating
5
P
PrintablesV1per_Zerofy

Tensegrity Table (Floating Table)

Print with Support everywhere 0.4 Nozzle 0.15 mm Layer Height PLA or PETG When the holes are not not visible you can just scale it up a bit.

Downloads
257
Likes
17
Rating
4.5
P
PrintablesPeter Farell

Gritty Kylo Ren Helmet

Gritty Kylo Ren Helmet not hollow.

Downloads
256
Likes
87
Rating
0
P
PrintablesMaty

The Impossible Eiffel Tower - fully 3D printed tensegrity structure in a gift card format

Assembly instructions: https://eiffeltower.nenoff.com/ Stability test video: https://www.youtube.com/watch?v=wlf7PaVMOOA Please share your build! I am fascinated by the tensegrity (tension & integrity) buildings and structures. They look…

Downloads
252
Likes
86
Rating
5
P
Printablesdslauter

Chicken Grit Feeder

The simple chicken grit feeder, if you have chickens you should be giving them grit. This makes it easy as you can screw it to a post/wall and keep it off the ground a bit so it hopefully stays clean. I printed it without supports on an…

Downloads
247
Likes
46
Rating
4
P
PrintablesSebastian3

Cooler Grit// Mobicool FR40/MCF40 Grit for Floor

Mobicool FR40 grit. Total dimensions 437mm*237mm*6mm. I printed it in 2.5mm layer height and it took around 6 hours for each part. Make your own grit: Also added the Fusion360 file to let you create your own sized grit. Just change the…

Downloads
233
Likes
14
Rating
5
P
PrintablesHanilla

Gritfinity box for JBC Soldering Tip C245 and C210

This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…

Downloads
217
Likes
24
Rating
5
P
PrintablesSanford Prime

Tensegrity Table

This is the fourth part from my deep dive into tensegrity models. I still have one more coming. Learned a lot, all in all I've created 5 models. I'll post the last one here when I can. I find things like this fascinating. At first glance…

Downloads
217
Likes
50
Rating
5
P
PrintablesSeabird HH

BoltNut-Tensegrity

Bolt and nut - held by wrenches - connected by a thin thread, keep a fixed distance to each other and although not screwed, still give the whole object a stable structure. It is a fascinating experience when, after the 3D printing and the…

Downloads
205
Likes
62
Rating
5
P
PrintablesMochi115

Low Poly Tensegrity Dragon

This is a model of a low poly dragon flying over a cliff. It uses tensegrity to balance itself in a position so that it looks like it is flying. You will have to add notches to some parts in order to place the strings in place. I found…

Downloads
204
Likes
73
Rating
5
P
PrintablesDanae

Earring Scream grito horror terror susto

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…

Downloads
195
Likes
60
Rating
0
P
PrintablesAnubis MK

Modellbahn Spur N – Streu- / Splittkisten / N gauge model railway – litter / grit boxes

Modellbahn Spur N – Streu- / Splittkisten Zubehör für die Modellbahn. Ich habe Streu- / Splittkisten für die Modellbahn Größe N entworfen, die Kisten sind mit FreeCAD entworfen worden. Damit noch mehr Abwechslung auf die Modellanlage…

Downloads
186
Likes
13
Rating
0
P
PrintablesMAKERTEAM®

Tensegrity Table printable without Supports

Tensegrity Table printable without Supports. Print with PLA, Layerheight 0,2 or 0,28 is also fine. Infill 5-15% Place two models on printplate, bottom and top are the same.

Downloads
183
Likes
30
Rating
5
P
PrintablesStickyRib

Low Poly Tensegrity Dragon - Remix

Here are some further mods on the Low Poly Tensegrity Dragon… In this edition I have altered the base to add in three adjustable tensioners to make balancing really easy. Just feed the line throught the model (the holes through the wings…

Downloads
181
Likes
52
Rating
0
P
PrintablesModel Magic

Western Movies - True Grit - 1969

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
180
Likes
27
Rating
0

MOUSE SANDING PAPER BOX, LID, and GRIT DIVIDER TABS - SINGLE BANK EDITION

Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…

Downloads
179
Likes
36
Rating
5
P
PrintablesBojan

Car wash bucket grit remover quarter

I could not fit the original thing on my build plate (it's 200x200) so i decided to cut it to a quarted size and print 4 pieces :). It worked great, and I ended up putting 2 tiny screews between every quarter so it's all held in place as…

Downloads
174
Likes
43
Rating
5
P
PrintablesEric Hou

Tensegrity Desk Lamp

Page still under construction. Need to add a few more stls for surface covers. And update with a BOM + Instructions

Downloads
172
Likes
70
Rating
0
P
PrintablesPomeranč

Bucket Grit Guard for Car wash

Bucket grit guard that traps any dirt and debris on the bottom of the bucket. Added stronger version (V2) with thicker walls. You can scale or resize it to fit Your bucket. Use atleas PETG or ASA/ABS etc.

Downloads
169
Likes
13
Rating
0
P
PrintablesImperialWalker

Star Trek: TNG - Tensegrity Table

I was creating a Geordi La Forge visor for a friend and thought it would be awesome if it "floated" for display. Looking around the "verse" I found this table and really liked how the arm options looked. I decided to remix it and add a…

Downloads
158
Likes
69
Rating
5
P
Printablesachugb

String Tensegrity Structure

I found this model which looked really cool but didn't have a good base. I remade it from scratch in Fusion 360 (F3D file included) to include a base and also have smaller holes sized for monofilament fishing line. Assembly involves…

Downloads
155
Likes
22
Rating
0

Tensegrity Structure

The design concept is pretty simple and straight forward. It consists of the following piece types and quantities: x2 compression pieces. x2 base. For a complete set, you will need to print all 4 pieces , have a string or a ball chain…

Downloads
144
Likes
33
Rating
0
P
PrintablesWaldo

Gritty Grate Clay Tile & Coaster Press and Drying System PROTOTYPE

Introducing the Gritty Grate Clay Tile & Coaster Press and Drying System PROTOTYPE by yours truly. This system is best printed in FDM or SLA with a build volume of at least 147mmx147mmx140mm. I've printed these out of PLA+CF, PLA, and…

Downloads
143
Likes
99
Rating
5
P
Printableskaje

Tensegrity Stand/Sculpture

This was an idea I had been wanting to try out for some time. I wanted to experiment with more fluid shapes in 3D CAD, and also see if I could apply a spiral shape to a tensegrity assemblage. In addition to the prints provided here, this…

Downloads
143
Likes
19
Rating
5
P
Printablesbwaslo

3-Wire Tensegrity Table

This is another Tensegrity Table, but instead of one wire holding the upper part up and multiples pulling it down, it uses 3 to hold “up” and gravity to pull down. An optical illusion, though it only takes perhaps 10 seconds to figure it…

Downloads
139
Likes
19
Rating
5
P
Printablestoomuchtuna

Grit Label for Simple Sanding Block

Open the 3MF file with PrusaSlic3r. I have not tested other slicers, your mileage my vary. 1. Change Label Text Choose “Open as project” Right click on “Text - 400” in the sidebar, select “Edit text” Use Emboss popout to change the label…

Downloads
137
Likes
53
Rating
0
P
PrintablesNerys

99% 3D Printed Mid to Hi Power Model Rocket - Engineered structural integrity in complex Vase mode!

Making a 3D printed rocket is not hard. Making a LARGE (80mm by 1000mm or more) mid and high power rocket without throwing kilograms of filament at it. that's not so easy. making is ultra light and insanely easy to print Oh and requires…

Downloads
135
Likes
47
Rating
5
P
PrintablesSvw

Tensegrity Structure for Gravity-Defying Moss Garden

A tensegrity is a stable configuration of bars and cables. The bars don't touch each other and are only connected via the cables. If the cables are very thin compared to the bars, the bars seem to float in mid-air. The position and length…

Downloads
132
Likes
119
Rating
0

MOUSE SANDING PAPER BOX, LID, and GRIT DIVIDER TABS - DOUBLE BANK EDITION

Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…

Downloads
130
Likes
34
Rating
0
P
PrintablesJohination

Gritzner 788 Overlockmaschine Behälter für Nähreste / Gritzner 788 Catch Container Overlock

Ein Behälter für Nähreste für eine Gritzner 788 Overlockmaschine. Jedoch 20 mm breiter als der originale! Die angebrachten support Stützen kann man schön mit einem Seitenschneider entfernen. A container for sewing waste for a Gritzner 788…

Downloads
129
Likes
10
Rating
0
P
Printablesjubs

Dirt Guard (grit guard)

I needed a grit guard to get the grit off a wash-mitt. This one is designed to be 3d printed, using as little material as possible Category: Automotive

Downloads
123
Likes
13
Rating
0
P
PrintablesModel Magic

Western Movies - True Grit - 2010

Western Movies - True Grit - 2010 3D printable model.

Downloads
120
Likes
22
Rating
0
P
PrintablesAdam & Evil

Stable Tensegrity Table

Do you want a floating tensegrity table that doesn't wobble like a banker? Of course you do. This is the table for you. Watch the video to see how its done. The Drum is used to quickly adjust the angle of the table. The center line wraps…

Downloads
120
Likes
21
Rating
0
P
Printablesdeanmford

60% size of rcmz chain tensegrity

Layer height is 0.15mm (60% of originals 0.25 mm)

Downloads
117
Likes
7
Rating
0
P
PrintablesXjunkieNL

The Spider Mod That Makes Your Degritter Even Better

A 3D-printed insert designed to enhance the performance of the Degritter ultrasonic record cleaner. The Spider Mod helps dirt and debris settle more effectively in the water tank. This reduces the amount of contamination that recirculates…

Downloads
116
Likes
3
Rating
0
P
Printablesbwaslo

Wood and Metal Tensegrity Table

Here is a version of my Symmetric Tensegrity Table, done in wood and metal. Of course, it's really all just plastic (wood filled PLA and Silver Silk PLA), but it looks pretty believable. The table uses transparent nylon lines for a better…

Downloads
114
Likes
31
Rating
5
P
PrintablesKOTA CAD

Plant Tensegrity

You will need to print two of the files. In the picture, there are arrows and lines. The red arrows all need to be the same length. I made mine 3.5 inches, but feel free to customize the length. The green arrow is the main support. I made…

Downloads
114
Likes
96
Rating
5
P
PrintablesLinkDesigns

Easy Tensegrity Table

To finish this model, cut three lengths of fishing line and string them through the four sets of holes, as shown in the picture below. Print Settings: Rafts: No Supports: No Resolution: .2mm Infill: 25% Filament material: PLA, ABS, PETG…

Downloads
110
Likes
14
Rating
5
P
PrintablesSanford Prime

Tensegrity Floating Cell Stand

This is my fifth, and final, model from my deep dive into tensegrity. Learned a lot, all in all I've created 5 models. All 5 of them are downloadable here on Printables.com, COLLECT them all! I find things like this fascinating. At first…

Downloads
104
Likes
21
Rating
0
P
PrintablesSanford Prime

Simple Tensegrity Model

This is my deep dive into tensegrity models. I have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them when I can here. I find things like this fascinating. At first glance it defies gravity, you can't push…

Downloads
104
Likes
12
Rating
0
P

Print in Place Tensegrity Table

If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and, get some feedback maybe. I made this on a whim because I wanted to. It's a really easy print, only needing a little…

Downloads
103
Likes
16
Rating
0
P
PrintablesLiviu Chiribuca

Grit Guard for 10l bucket

Grit Guard for 10l bucket

Downloads
102
Likes
14
Rating
0
P
PrintablesBills Workbench

Matchbox 70B Grit Truck Slider

Replacement slider door for a Matchbox 70B Grit Truck

Downloads
98
Likes
6
Rating
0
P
PrintablesSeabird HH

Magnetic Tensegrity Table

This is my fourth contribution to the topic "Tensegrity". The main difference to the other models is that the tension in the middle is not created by a thread but by magnetism. Therefore the top is of course not as loadable as with a…

Downloads
95
Likes
14
Rating
0
P
Printablesdancan13f

Tensegrity

The parts of this remix are a little more solid than those of the original model. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 100% Filament: Geeetech PLA Black Print Settings…

Downloads
94
Likes
6
Rating
5
P
PrintablesRobo3DDesiGn

Impossible / Tensegrity Table.

Supports Are Needed . Use 4 Strong Strings and tie them in the showed places. You Can Resize The Model By Remix it / or on Your Slicer . Enjoy & Share your prints with me !

Downloads
94
Likes
8
Rating
0
P
PrintablesSanford Prime

Magnetic Tensegrity Triangle

I thought I was done making Tensegrity models, but this makes #6! This is a variation (or remix if I will) of one of my other tensegrity models I made, which you can also find here on Printables. Link below: Triangle Tensegrity by Sanford…

Downloads
92
Likes
40
Rating
5
P
Printablesbwaslo

Symmetric Tensegrity Table

Another variation on the tensegrity tables that everyone has been printing. In general, most of them I've seen have been interesting, but really, really ugly! This is attempt to make something more attractive looking. see:…

Downloads
91
Likes
21
Rating
0
P
Printablestsab

Tensegrity Dragon

This is a tensegrity dragon, the way the dragon is attached to it's base with strings gives the impression that it floatThis is a tensegrity dragon, the way the dragon is attached to it's base with strings gives the impression that it…

Downloads
88
Likes
27
Rating
0
P
PrintablesSouthpawBob

Grit/Salt Shaker

Please note as of the time of uploading, I have been unable to print the full design due to a lack of filament. I have however printed the assembled parts and confirmed they fit together as intended. Tolerances are fairly tight though, so…

Downloads
88
Likes
41
Rating
3
P
PrintablesSembazuru

110mm fixture for "Floating" tensegrity table with built in tensioning mechanism

After printing the parts for a floating tensegrity table (see the remix source) and assembling the hardware, I realized that I wasn't looking forward to trying to thread this and get the right estimated lengths before tensioning. So, I…

Downloads
86
Likes
3
Rating
5
P
PrintablesFotoman

2 inch Sanding Disc Storage - 7 Grits with Lid

Store your sanding discs easily with this 7 grit (or 6 + mandrel) storage unit. Optional lid makes storing on its edge easy. Printed in PETG but any material should be fine.

Downloads
85
Likes
10
Rating
0
P
PrintablesLeos

Umbrella Tensegrity Model

Summary Section: An incredible umbrella model with two umbrellas in tensegrity with each other. It features lightning bolts and even a person who lives in the umbrella. It fits within a 15x15 box and is about 23 cm tall. This was a team…

Downloads
83
Likes
16
Rating
0
P
PrintablesZander

Tensegrity Table

Problem Statement: With a partner, you will design and create a single custom Tensegrity Structure of equal complexity or greater as the tables depicted above (as determined and approved by the instructor). General Advice: We worked on…

Downloads
83
Likes
10
Rating
0
P
PrintablesRishab Nair

Wave Tensegrity Model

Summery: Designed by Dab (Rishab and Dante) - A beautiful decorative tensegrity model with a cloud, wave, and lightning bolt. It has a really cool design to make it look like a stormy sea. It uses fishing line. Here is the link to the…

Downloads
83
Likes
13
Rating
0
P
PrintablesDante G.

Tensegrity Project

Summary (Continued): Impress guests while marveling at the physics of the universe in style with this tensegrity structure. Created in tandem with @Rishisafish , this group project was a blast, and you should check out their profile as…

Downloads
82
Likes
17
Rating
0
P
PrintablesUpside3048

Charging cradle for Polar Grit-X Pro

This charging cradle is a remix of https://www.thingiverse.com/thing:4726435. I have added some noses to keep the charging cable in place without glue. You have to print it back-side down and enable supports.

Downloads
81
Likes
8
Rating
0
P
PrintablesSeabird HH

Floating Pen Box - Tensegrity

The thread in the middle of the two brackets - besides the four threads connecting the pen box and the base - builds the tension in this object. It's a bit magical how the physical conditions create a tension that makes this object a unit…

Downloads
80
Likes
19
Rating
0
P
PrintablesOpen print

Tensegrity Table

U need to print 2 bases The chains in the middle will open in about 12 hours

Downloads
78
Likes
11
Rating
0
P
Printableszzzy

tensegrity sculpture

Inspired by u: erniec53 's Single-string Tensegrity model, I needed an editable design so I could print the tension brackets flat for better strength. Print Settings Rafts: No Supports: No Resolution : 0.2 mm Infill: 35% Filament : any…

Downloads
77
Likes
16
Rating
0