Adjustable height sensor cover for VR headsets
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
- Downloads
- 10
- Likes
- 0
- Rating
- 0
35 models
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
These devil horns are made to be attached to a headset or headphones. The .stl file is one single horn. The .3mf file is for Bambu Studio and already includes two horns on the build plate. Print Settings: I printed the horns with 0,12 mm…
Cable clip that holds your VR headset cable on your belt. Easy print, no supports needed.
When slicing consider splitting the model in two along the neck using a dovetail joint if you have a small printer pla 15% paint on supports printed great! used some super glue to stick the two pieces together and has held great for 3+…
Replacement Battery Cover for 3M™ PELTOR™ ComTac Headsets. Printed in flexible TPU with my Creality CR-6 SE. It can be tricky to print this without any layer/wall separation (using the cheap filament that I use anyway). I print these…
Update 9 Jan 2020: Thanks to zachariazh for pointing out that you can pay nearly 20€ for what is basically the same exact thing from Extralite , the Italian manufacturer of super lightweight weight weenie parts. The only thing you don't…
🎧 MONOSTAND – Suporte Minimalista para Headsets Mantém os teus auscultadores sempre à mão e em grande estilo com o MONOSTAND , um suporte minimalista e moderno , criado para organizar e valorizar o teu espaço de trabalho ou gaming setup .…
This is a very strong monitor hook for headphones and headsets. I made them in three different sizes for different monitor bezels. I also included the step files so you can modify them for your needs. I deployed 60 of them and none have…
Ceiling hook to hang Oculus Rift's wire with dog leash or extendable name tag holder. It could be use for other purpose though. Prepared STL specification: Length: 52mm Width: 18 mm Hook diameter: 4.4mm These dimensions were chosen to fit…
This is a comically fast print (< 1 minute print time on a Bambu P1S with all the speeds turned down) that replaces a tiny little plastic part that is otherwise impossible to find. The Lightspeed Zulu 3, Zulu 2, and Sierra headsets all…
this is the final dimensions of my speaker arms that house tectonic tebm35c10-4 BMR drivers, these are cheap and easily available. for those in UK, can be purchased here: https://uk.rs-online.com/web/p/speaker-drivers/1345563 this started…
Este soporte permite ajustarse a el grosor de distintos materiales de apoyo. En este caso, como se ve en la foto, esta apoyado en una repisa, misma que mide alrededor de unos 13mm de grosor. El tornillo permite ajustar esta dimensión, y…
It's a Headset holder for the EPOS GSP600 headset on you're Ikea Kallax. It fits on the top and bottom side, not for the smaller parts in the middle.
This is a stand for your headphones, and a fan at the same time. Form and function in one package. My headsetstandfan fitted with Noctua Airflow Amplifier. This uses a 120mm pc casefan. Cut the frame off, so that headsets fit better.…
This is a protective screen that I designed for my Pimax 8k x (potentially it could fit other Pimax headsets). Its main function is to protect against sun rays that could potentially damage the screen behind the lenses. But it also…
Time to organize things - so where do I put my headset? Maybe I should just design and print a simple wall hanger for headsets? ... OK, done! Category: DIY
These 3D-printed cat ears are the perfect accessory to personalize your computer headset with a playful and stylish touch. Made from durable PLA material, each ear is designed in two interlocking pieces that fit together seamlessly,…
An easy printable headsetholder. Printed with Prusament PLA, 0,2mm layer hight and 20% infill, but it will also work with other settings.
As I said before, I originally made this model, 'cause after using my headsets, I would come across a problem. I didn't have where to store them, and that's when it hit me. I would design my own!! After many failed attempts and prints, a…
All Models should be printed Standing up. Just use supports and a wide brim for the stand part of the headsetstand. The Mount is designed to fit into the holes of the stand with a little bit of effort. You should still glue it with a drop…
This is a stand for your headphones, and a fan at the same time. Form and function in one package. This uses a 120mm pc casefan. Cut the frame off, so that headsets fit better. Don't cut the wires though. There's a small channel for the…
I recommend to print it with 80% infill or more and also using a rubber mallet
This clip directs the wires on your headset to the back of your head. This keeps the wires out of the way and moves the center of balance to the middle of your head. Use TPU or any hard plastic with better strength than PLA. I used PETG.…
:Print at a 20% infill supports needed You can use zip ties for the bottom hole or a Velcro strap over the top notch. this is my first model and i think its neat
Hinges to adapt a Rigid Headstrap made for the Oculus Quest 1 you can find here : https://www.aliexpress.com/item/1005001562458200.html With headphones you can slide on it before installing to get sound. You can use those kind of drivers…
Den Galgen zum Aufhängen eines Headsets benutze ich für mein Mikrofon. Taugt natürlich auch für Kopfhörer etc. Einfach mit ein bisschen Klebeknete oder doppelseitigem Klebeband dort befestigen, wo es greifbar sein soll. I use this to hang…
You will need three T-Pins per hook and there are 3 different depths to choose from. If you have a custom size, please let me know.
Unleash the dragon and turn your gaming space into a legendary lair! This epic Dragon Head Wall Mount isn’t just an eye-catching piece of wall art—it’s a functional and powerful way to organize your gear. Designed with gamers in mind, it…
Printing Settings Recommended: Layer height: 0.20 mm Base part Infill: 50% Hanger Part infill: 15-20% Supports: Turn on default settings Material: PLA / PETG Assembly insert the stand part into the base part.
Unleash the dragon and turn your gaming space into a legendary lair! This epic Dragon Head Wall Mount isn’t just an eye-catching piece of wall art—it’s a functional and powerful way to organize your gear. Designed with gamers in mind, it…
FDM 3D printer optimized rugged Brackets/Yoke/Clip for headsets. Useful to replace broken or worn out ones. Microphone support with slim and rugged options. Twist to lock functions makes the clips hold in place and move smoothly without…
Printing Settings Recommended: Layer height: 0.20 mm Base part Infill: 50% Hanger Part infill: 15-20% Supports: Turn on default settings Material: PLA / PETG Assembly insert the stand part into the base part.