Search results: honing

Sort order

46 models

P
PrintablesZdeněk

Scythe Whetstone Holster [Pochva na brousek] (a.k.a. Honing Stone Sheath)

Introduction A practical belt-mounted holder for a traditional scythe whetstone (honing stone). When mowing with a scythe, the blade is regularly touched up using a wet whetstone carried at the waist. This holder keeps the stone immersed…

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
3
Rating
0
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…

Downloads
2,247
Likes
1,118
Rating
4.71
P
PrintablesEadubs

Eclipse Style Chisel and Plane Iron Sharpening and Honing Guide

This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…

Downloads
1,180
Likes
240
Rating
5
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons

This experiment was to see if I could make a mechanism that securely held chisels and plane irons without too much flex. It works well, but shorter chisels like the Dewalt one in the photos won't do much more than a micro bevel because…

Downloads
384
Likes
128
Rating
5
P
PrintablesSebastianDruckt

Best sharpening / honing jig for chisels, knifes, planers below 20 bucks

I always failed in correctly sharpening my chisels, so i thought of a method to always sharpen correctly without spending > 100 bucks for veritas tool. I came up with this solution. You need: Diamond Stone / Wetstone I took the SHARPAL…

Downloads
321
Likes
235
Rating
5
P
PrintablesAndreas Gohr

Low Profile Honing Guide

This is a low profile honing jig to sharpen chisels or planer blades. The low profile makes it work well with very short blades as the one used in pocket planers. You also need: 2 626Z bearings (or similar) 2 M6 nuts 4 M6 washers 2 M6…

Downloads
259
Likes
37
Rating
4.33
P
PrintablesDeanCording

Bevel Gauge for 'Eclipse' Style Honing Guide

This gauge allows you to consistently set different bevel angles when honing chisels and plane irons using the 'Eclipse' style honing guide (such as Honeboy sharpening jig ). There are two gauges - one for honing plane irons and the other…

Downloads
218
Likes
21
Rating
4.5
P
PrintablesMichael

Tormek Leather Honing Wheel LA-220 Alternative

This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…

Downloads
212
Likes
31
Rating
5
P
PrintablesLuke Rantanen

Chisel Honing guide

The goal of the project was to make a fully print-in-place tool so no hardware is required but clamping the chisel was never sturdy enough. Not sure one the exact size of the screws used, when the outer diameter of the threads was…

Downloads
161
Likes
31
Rating
0
P
Printablesharbormaster

Chisel / Block Plane Blade Honing and Sharpening Guide

Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…

Downloads
156
Likes
27
Rating
5
P
PrintablesEmk

Angle Setting Jig for Lie-Nielson Honing Guide

This is an angle setting jig for a Lie-Nielson Honing Guide. Made to be printable on MK3(s). I'd recommend printing the supports on the bottom of the model.

Downloads
156
Likes
20
Rating
4.5
P
PrintablesTache

Card Scraper Vise and Honing Guide (KM Tools specification)

This is a 3D printed version of the KM Tools Card Scraper Vise and Honing Guide as described in their downloadable plans and YouTube video “ Card Scraper Sharpening Jig - Gorgeous Shavings - Free Plans and Free Hardware.” with an…

Downloads
147
Likes
56
Rating
5
P
Printablesver2go

Veritas Side-Clamping Honing Guide Angle Guide

Angle guide for Veritas Side Honing guide. I removed the lowest and highest angles since I don't use those. https://www.leevalley.com/en-us/shop/tools/sharpening/guides/111759-veritas-side-clamping-honing-guide?item=05M0940

Downloads
142
Likes
4
Rating
0
P
Printables3DDIY

Veritas honing guide box

This is a small tool box made to fit the Veritas honing guides and a few accessories. This was part of a project where I made a Japanese Whet Stone sharpening pond. The Main box can be printed with out supports. The lid will need supports…

Downloads
127
Likes
47
Rating
0
P
PrintablesLuke Rantanen

Plane Honing guide

The goal of the project was to make a fully print-in-place tool so no hardware is required but clamping the chisel was never sturdy enough. Not sure one the exact size of the screws used, when the outer diameter of the threads was…

Downloads
123
Likes
32
Rating
0
P
Printableskjs

Honing guide. Chisel and planer blade sharpening jig

As I never got the results I wanted with the usual Chinese or the other homemade sharpening jigs I was searching for a better solution and low and behold, I found it . Unfortunately the price was rather steep (but justified) and I thought…

Downloads
116
Likes
21
Rating
0
P
PrintablesMichael

Tormek T4 Leather Honing Wheel Lederabziehscheibe LA-145 Alternative

Leather Honing Wheel for Tormek T4. You need: Natural Leather ~500mm x 25mm x 3mm Glue: Superglue, Epoxy or Siliconglue etc… Sandpaper ~#100 to roughen the surface of leather and disc Sharp knife to cut the leather Triangle ruler

Downloads
97
Likes
14
Rating
5
P
PrintablesMichael Vincent

Angle jig for Veritas side clamping honing guide

This guide helps setting the sharpening angle for the Veritas side clamping honing guide. The guide sits on the edge of your bench and allows you to set the angle. There is a seperate gudie for the upper and lower slots. I have printed…

Downloads
68
Likes
8
Rating
0
P
Printablesprintberg

Scheppach Tiger 2000s holders for Tormek LA-122 Honing discs

This is a Tormek LA-122 honing disc holder that fits instead of the normal honing wheel of the Scheppach 2000s. Parts has been oriented in the proper direction for printing. Only the outer part of the inner retaining ring for the big…

Downloads
49
Likes
3
Rating
0
P
PrintablesSlashkan

Honing jig for lathe tools

Jig to sharpen a 40 degree bevel on gouges for lathe work

Downloads
43
Likes
4
Rating
5
P
PrintablesBurgundy__7

FN PS90/P90 chamber honing tool

I was experiencing some feeding issues with my PS90 with a CMMG barrel. The feed lip on the chamber was very sharp and was causing damage to the brass, bullet setback, and failures to feed. This tool is meant to be used with lapping…

Downloads
32
Likes
2
Rating
0
P
PrintablesJulianFM

Hand Plane Blade and Chisel Sharpening/honing Sled/Jig

This is another rolling sharpening sled for plane blades, chisels and anything with flat faces and a pointy end. This desing of mine is inspired in the cheap commercial solution you can buy from anywhere and in fauxhican's desing. It can…

Downloads
29
Likes
6
Rating
0
P
PrintablesJoe Kaiser

Magnetic hand tool sharpening and honing guide

Are you trying to learn how to sharpen chisels and plane blades without a guide? This magnetic level is the tool you need to build muscle memory. Two common angles are provided in the model - 25* and 30*. Print, inserts magnets and a…

Downloads
27
Likes
4
Rating
0
P

Honing Jig - 15 degree guide (standardized to same mounting as other guides).

Original design is fantastic, but 15 degree guide seemed like it was added on later. Modified to have the same depth and mount dimensions as the other guides. This way you can use the same cross support for all guides. Also extended and…

Downloads
24
Likes
4
Rating
0
P
Printablesdalethatcher

Accessory for Magnusson Honing Guide

Use the guide to get the correct protrusion when using a Magnusson Honing Guide. OpenSCAD file can be used to customise for other honing guides. Printed in PLA.

Downloads
23
Likes
1
Rating
0
P
Printablesrogerquin

Rolls Razor blade honing handle

A very simple offset handle with a flat side for use when manually honing Rolls Razor blades. To use and maintain the proper blade angle, simply use a small piece of electrical tape and tape the handle with the flat side against the back…

Downloads
22
Likes
5
Rating
0
P
Printablesjustinow3n

Angle Jig for Lie Nielsen Honing Guide

3mf file has jig body with all of the text. Use STL to print indicator that goes in jig body housing. Basic shape and cutouts are plotted in OpenSCAD. Printed in PETG. The text looks a lot better when printed upside down IME. Slots are…

Downloads
20
Likes
3
Rating
0
P
Printablesengineererrant

Atlin (Eclipse-style) Honing Guide Gages

Insert the blade into the honing guide, then lay the gage on the top face of the blade (using either the 25-degree main bevel slot or the 35-degree secondary bevel slot) & butt it up against the guide. Sharpen & hone the thing. Always cut…

Downloads
18
Likes
8
Rating
0
P
Printabless_p

Honing steel rod magnet holder

I always forget to hone the knife before use and also very lazy to pick the honing steel rod out of drawer. I needed to have my honing steel rod somewhere near my kinvesblock. This model is a magnet holder, supposed to be fixed onto the…

Downloads
17
Likes
2
Rating
0
P
PrintablesCary

Jointer or planer honing jig

Hone your planer/jointer blades. I made an 8" one and a 6" one. I would have made a 12" one, but I thought that not many people can print 12" high. I print it on end. I created a coupler so you could glue multiple pieces together if you…

Downloads
15
Likes
3
Rating
0
P
PrintablesNoExpert

Knife Honing Steel Holder

I made this Knife Honing Steel Holder in order to get the angle right and consistent over the full length. Right now, I just can't do it in mid air with a consistent angle and I feel more comfortable with a solid base and using two hands.…

Downloads
15
Likes
0
Rating
0
P
Printablesikilledmypc

Screw on holder for honing steel

You can use this to fit any 10mm honing steel to an existing knife block by screwing this on

Downloads
12
Likes
0
Rating
0
P
PrintablesNate Cox

Honing Guide Projection Jig

Honing Guide Jig Generator OpenSCAD file for generating a jig to get the projection length right for each angle of a honing guide. Because each honing guide is different no STLs are supplied here. You can edit the values of the generator…

Downloads
11
Likes
1
Rating
0
P
PrintablesMosswildsMade

Honing Guide for Chisels and Planes (AmazonBasics)

Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…

Downloads
10
Likes
1
Rating
0
P
PrintablesP L

chisel shapering jig Honing guide

Jig for sharpering chisel. You need: M6 L=~200mm rod -1 ps M6 nut M6 flat washer M6 bolts Torx pan-head screws for plastics, 3x12 furniture ball-bearing slide 400 /450mm -1 set

Downloads
10
Likes
3
Rating
0
P

Spokeshave Honing Guide

I was frustrated to realize that the Veritas mkII requires an additional attachment to sharpen shokeshave blades, so I decided to make a tool to allow me to hold these blades in one of my roller honing guides. I designed it to fit in…

Downloads
9
Likes
1
Rating
0
P
PrintablesSumter Tisdale

Lee-Valley Veritas Side-Clamping Honing Guide Registration Jig -- 25° + 27.5°

Registration Jig for Lee-Valley Veritas Side-Clamping Honing Guide. 25° and 27.5° for the upper location on the guide. https://www.leevalley.com/en-us/shop/tools/sharpening/guides/111759-veritas-side-clamping-honing-guide…

Downloads
8
Likes
1
Rating
0
P
PrintablesMads T

"smart-phoning" ahead

The g-code is 3 color shift , start with WHITE then BLACK and last RED

Downloads
8
Likes
2
Rating
0
P
PrintablesCarstenMT

Honing Guide Adapter for Chisels

When using a chisel honing guide for hand engravers the chisels don't fit very well and tend to tilt. With this adapter they fit tightly. The adapter can be modified to the engraver blades measurements in the Freecad File.

Downloads
7
Likes
2
Rating
0
P
PrintablesPaul Sp

Leather Honing Wheel 180 mm for Record Power WG200

This is a Leather Honing Wheel for the Record Power WG200 wet grinder. It has a 12 mm hole since there may not be a need for a alu spacer sleeve. Also there is a 12x24x6 spacer for the outside so you can print the wheel without supports.…

Downloads
7
Likes
2
Rating
0
P
PrintablesPaul

Robert Larson Honing Guide Guide

A simple jig. I was surprised to not find one here already.

Downloads
6
Likes
0
Rating
0
P
PrintablesSumter Tisdale

Lee-Valley Veritas Side-Clamping Honing Guide Registration Jig -- 30° + 32.5°

Registration Jig for Lee-Valley Veritas Side-Clamping Honing Guide. 30° and 32.5° for the upper location on the guide. https://www.leevalley.com/en-us/shop/tools/sharpening/guides/111759-veritas-side-clamping-honing-guide…

Downloads
5
Likes
0
Rating
0
P
PrintablesZodsmar

Honing Angle Guide

Get the right angle on every stroke. No guessing. Most knife blocks come with a honing steel, but most of us just guess the angle when we use it. A steady 15° or 20° keeps an edge keen, and a wobbly angle rounds it off. This guide clips…

Downloads
4
Likes
2
Rating
0
P
Printables

Robert Larson Honing Guide Guide

A simple jig. I was surprised to not find one here already.

P
Printables

Honing Guide for Chisels and Planes (AmazonBasics)

Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…

P
Printables

Knife Honing Steel Holder

I made this Knife Honing Steel Holder in order to get the angle right and consistent over the full length. Right now, I just can't do it in mid air with a consistent angle and I feel more comfortable with a solid base and using two hands.…