P
Printables3D_D3
Sigma moai
I printed the sculpture little bit bigger than in .stl . As a template, I used sigma squidward. Enjoy your printing, and a enjoy moai! And don't forget to follow me for more models;}
- Downloads
- 1,323
- Likes
- 94
- Rating
- 4.9
Search results: igm
536 models
P
PrintablesCraig Heath
Replica Enigma Machine Rotor
WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…
- Downloads
- 624
- Likes
- 76
- Rating
- 5
P
PrintablesTEDesign
Sigma Aura 100 GoPro Adapter
I had the porblem that my bicycle lamp sigma aura 100 was mounted on my handlebar and it did shine onto the garmin navigation device. I had the opportunity to mount it under the mount with a GoPro-Mount. So I designed a holder for my lamp…
- Downloads
- 455
- Likes
- 37
- Rating
- 4.67
P
PrintablesOliver Thomsen
SIGMA BLAZE mount (GoPro compatible)
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
- Downloads
- 209
- Likes
- 27
- Rating
- 4.25
P
Printablesshokwaav
Sigma DP Merrill LCD Hood
I managed to get a second hand Sigma DP1 and DP2 Merrill for quite cheap, but realised that the LCD was quite useless in bright light. I managed to find a design on thingiverse which did exactly what I wanted, but the design required…
- Downloads
- 117
- Likes
- 9
- Rating
- 0
P
Printablesjefftml
Solar Filter Mount for Sigma 150-600 F5-6.3 DG OS HSM | C
A simple rotate and snap-in solar mount for the Sigma 150-600MM F5-6.3 DG OS HSM | C. This fits in just like a lens hood. Just clip your solar filter on the edge of the mount. Easy print, no supports needed.
- Downloads
- 109
- Likes
- 4
- Rating
- 0
P
Printablesdada
Sigma Blaze Mount
I wanted a rear light for my old MBK Mirage that light up when I go through a tunnel and when I pull the breaks. The Sigma Blaze does it perfectly. You'll find what you need to plug it under the saddle with two serflex. NB : this bicycle…
- Downloads
- 104
- Likes
- 13
- Rating
- 5
P
PrintablesMarkus_94
Spacer SIGMA SPORT GPS MOUNT / GARMIN MOUNT
Distanzscheiben für Sigma Sport Navihalter, da ohne Scheibe mein ROX 4.0 kontakt zum Vorbau hat. Längere Schrauben ist notwendig → Original M3x6 (Senkschraube) Spacers for Sigma Sport navi mounts, as my ROX 4.0 has contact with the stem…
- Downloads
- 48
- Likes
- 4
- Rating
- 0
P
PrintablesYetti
Blade lame safety cover remix / Teigmesser Sicherheitsabdeckung Remix
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
Printablescrashkg
Nozzle Tip Aligment
Print with arrow face to the bed. No supports needed. This is the nozzle wiper I am using: https://www.printables.com/model/987505-nozzle-wiper-for-prusa-xl
- Downloads
- 31
- Likes
- 4
- Rating
- 5
P
PrintablesMadblam
Sakura Pigma Micron 7-Pen Holder
A minimalist pen holder for 7 Sakura Pigma Micron pens , designed for clean looks and efficient printing. Optimised for 0.6 mm nozzle with single-wall extrusion for a light yet rigid design. Works perfectly with a 0.4 mm nozzle if you add…
- Downloads
- 17
- Likes
- 1
- Rating
- 5
P
PrintablesZŠ Náměšť na Hané
Otevírač SIGMA BC 12.12. STS
Ztratil jsem originální nástroj pro otevírání víčka bateriového prostoru vysílače cyklocomputeru Sigma BC 12.12 STS. Tato jednoduchá pomůcka ho nahradí. Do otvorů je třeba nalisovat (vtlačit) ocelový hřebíček nebo v mém případě PIN, který…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesLoboCNC
Enigma Puzzle Box
This original design puzzle box, with hidden latches, sliding panels, a mystery dial, and covered with runic symbology, is the perfect place to keep your most valuable keepsakes safe (from anyone without a hammer). It requires just the…
- Downloads
- 3,686
- Likes
- 1,153
- Rating
- 4.73
P
PrintablesSergio Morales
Enigma Machine Replica
All related data and arduino sketch in: https://github.com/Menyiques/Enigma Printed on PLA on a MK3S with MMU2S. Working video: https://www.youtube.com/watch?v=k2SRl5kKgS8
- Downloads
- 1,574
- Likes
- 237
- Rating
- 5
P
PrintablesJungleG1337
Elegoo Neptune 4/Pro/Plus/Max's X Gantry Aligment Tools
I had an issue like many other with the X gantry on my neptune 4 max got out of wack from shipping. This will help you to realign the X gantry.
- Downloads
- 1,322
- Likes
- 216
- Rating
- 4.71
P
Printableskloto
Sigma Aura 80 GoPro Mount
The mount holds the bike light in a snug fit. Use M3x4 screw to fix the light in the mount (optional, but recommended). Due to the tight fit, PETG is recommended (Also because of the dynamic loads on the part during driving) Printing in…
- Downloads
- 808
- Likes
- 14
- Rating
- 5
P
PrintablesDrunken Wizard
Dummy 13- BigMod for over 500%
I modified the frame, specifically the ball joints for dummy 13 to be used when printing over 500%
- Downloads
- 708
- Likes
- 229
- Rating
- 3
P
Printablesiggy
WC pusher plate - Geberit Sigma compatible | Drückerplatte
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
- Downloads
- 599
- Likes
- 38
- Rating
- 5
P
Printablesmegafrost
Adapter for Geberit Sigma Flush Plate on UP100 Cistern
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
- Downloads
- 585
- Likes
- 17
- Rating
- 0
P
PrintablesMcHuna
Geberit adapter to SIGMA buttons
Adapter for toilet module GEBERIT DELTA. You can use the GEBERIT SIGMA buttons. Instructions: remove DELTA button remove black frame and parts add adapter frame and new parts use spring and blue wedges add new SIGMA button Printed on…
- Downloads
- 584
- Likes
- 14
- Rating
- 0
P
PrintablesSablebadger 3D
Gaming Tokens - Age of Sigmar
A set of gaming tokens or markers for use in table top gaming. This set is part of series of releases with similar dimensions that allows for multicolor printing with a simple layer switch. This set is for the game Age of Sigmar, and was…
- Downloads
- 575
- Likes
- 48
- Rating
- 4.5
P
Printablesreddadsteve
Figment
Figment, a small purple dragon, is the mascot of the "Imagination!" pavilion at the Epcot theme park at Walt Disney World Resort. Dreamfinder, a jolly wizard-like scientist, teaches Figment how to use his imagination. Figment is meant to…
- Downloads
- 538
- Likes
- 180
- Rating
- 4.91
P
PrintablesWF3D
Diablo 2 "Enigma" Runes
These are the runes of the runeword Enigma "Jah - Ith - Ber" from Diablo 2.
- Downloads
- 526
- Likes
- 60
- Rating
- 4.86
P
PrintablesPrusa Research
IPA pigment filter holder
This holder serves to assemble of IPA pigment filter. You can purchase the IPA pigment filter here: https://www.prusa3d.com/product/ipa-pigment-filter/ A detailed guide on how to assemble the IPA pigment filter can be found here:…
- Downloads
- 448
- Likes
- 45
- Rating
- 3.67
P
PrintablesDauntless
Sigma's Hyper Sphere Weapons - Overwatch
I wanted one, so I made one. Not scaled, sizings eyeballed, but it looks pretty good and is decently accurate to the geometry I could see without having the models themselves. This includes the inner face of the orb. The model is around…
- Downloads
- 397
- Likes
- 78
- Rating
- 5
P
PrintablesAngelius
Garmin/Sigma Rox 11 mount above stem
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
- Downloads
- 375
- Likes
- 51
- Rating
- 5
P
PrintablesHobby Lab
Creality Falcon 2 40w foot mount with bed aligment
Revised version of my simple foot mount which supports alignment of the 500x500 honeycomb bed and keeps everything in the same place. Need to print 2 of each. Filenames explain which ones are for which feet My feet are positioned at their…
- Downloads
- 370
- Likes
- 23
- Rating
- 0
P
PrintablesSukatraps
Sigma Aura 80 GoPro Halterung
Mount a light to a gravel bike upside down is not as simple as thought. The solution to my SIGMA Aura 80 light was to design and print a bracket to mount it beneath my QUADLOCK out front mont via a gopro adapter. Print upside down (flip…
- Downloads
- 367
- Likes
- 11
- Rating
- 0
P
Printablesdiamondblack75
Sigma Aura 80 to GoPro Mount - print without supports
What a frustration not to be able to simply detach the lamp from the handlebar without removing the whole mount. So, I designed a sturdy mount that can be attached to a GoPro mount. This mount considers physical constraints, so the…
- Downloads
- 333
- Likes
- 25
- Rating
- 5
P
PrintablesSIGMA LAB
KEYRAMBIT SHARK 1.0 FLEXY FISH keyflipper for sigmas
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
- Downloads
- 327
- Likes
- 17
- Rating
- 0
P
PrintablesSmok7kp
5 x 2 x 32mm movement tray for 9th age/warhammer fantasy battle/age of sigmar/40k unit of ten models with 32mm base
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
- Downloads
- 327
- Likes
- 26
- Rating
- 0
P
PrintablesToby3D
Sigma Aura 60/80 to GoPro Mount
Printed in PLA with 4 perimeters - 2-piece print without support (One-piece print also attached, but more complicated to print) Combine parts with glue and screw tight (in the correct orientation) 10mm M3 screw used also find my Print in…
- Downloads
- 312
- Likes
- 15
- Rating
- 4.75
P
PrintablesDoctorHorsewhip
Age of Sigmar Spearhead Points Tracker
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
- Downloads
- 304
- Likes
- 22
- Rating
- 0
P
PrintablesENKI
Sigma Mount AURA 60 ( 80 )
Just a little plastic piece from a Sigma Aura 60 Lamp (Mine works fine after 1 year of using it) Print Settings Printer: custom kinda Anet+ kinda E3D+ Rafts: Doesn't Matter Supports: Yes Resolution: 0,4 Infill: 100 Filament: Old stuff PLA…
- Downloads
- 302
- Likes
- 28
- Rating
- 4.67
P
Printablesigfarm
Lens hood for Sigma 18-50mm lens
I created this lens hood because the stock one did not allow me to install a magnetic filter ring on the lens.
- Downloads
- 284
- Likes
- 26
- Rating
- 5
P
PrintablesAngelius
Canyon G5 Spacer Mount for Garmin/Sigma Rox 11
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
- Downloads
- 274
- Likes
- 19
- Rating
- 5
P
PrintablesRonny
Cricut Joy Pigma Micron adapter
use this print so you can use your Pigma Micron markers in the Cricut Joy Plotter. I used 100% infill, but less will do I guess
- Downloads
- 251
- Likes
- 37
- Rating
- 0
P
PrintablesRed-Card
Enigma Puzzle Box Latches
Remix of original short and long latches with 2.5mm pins.
- Downloads
- 248
- Likes
- 29
- Rating
- 5
P
PrintablesMousearnickle
4th Edition Age of Sigmar Compatible Objective Markers
I've knocked these together very quickly for the new edition of AoS, but would absolutely be compatible with other games. The central circle is 40mm in diameter, and the outer edge of the larger circle sits 3-inches away - no need to…
- Downloads
- 236
- Likes
- 11
- Rating
- 0
P
Printablesdave
paints & brushes holder in tribute to Warhammer Age of Sigmar
For 6 citadel paints and 3 brushes
- Downloads
- 231
- Likes
- 53
- Rating
- 5
P
PrintablesRM772productions
Sigma 17-50 F2.8 EX HSM Lens Hood
A Perfect fitting Lens Hood for the Sigma 17-50 f2.8 Tested on a A1 mini
- Downloads
- 226
- Likes
- 15
- Rating
- 5
P
PrintablesDoctorHorsewhip
Age of Sigmar Spearhead Points Tracker With Twist Column
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points, battle tactics, and points from twists. Fits 16mm dice.
- Downloads
- 217
- Likes
- 18
- Rating
- 5
P
PrintablesMárcio Coragem
Sigma Buster mount
Handlebar mount for the sigma buster light. I recommend to be printed in ASA. I used a mix of ASA for the main body the grey pieces and a PC for the black. ASA is better for the flexibility and pc for rigiditity. But just ASA/ABS will…
- Downloads
- 212
- Likes
- 13
- Rating
- 5
P
Printablesjirom
Nendoroid/Figma Adapter Mount for IKEA Skadis
Two models are available: Square Adapter Mount (Recommended) - Easier to print and does not require any supports. Circular Adapter Mount - Looks better but requires requires additional supports. Printing Instructions Note that depending…
- Downloads
- 203
- Likes
- 56
- Rating
- 0
P
PrintablesSIGMA LAB
SIGMA SPINER 1.0 keyrambit
Keyrambit spiner do kręcenia kluczami. additional elements:https://allegro.pl/oferta/lozysko-kulkowe-61803-6803-2rs-17x26x5mm-15713802966 material: PLA, PETG, ABS, ASA infil: 40% supports: NO
- Downloads
- 199
- Likes
- 16
- Rating
- 0
P
Printablesreddadsteve
Figment - MMU
MMU version of Figment Figment, a small purple dragon, is the mascot of the "Imagination!" pavilion at the Epcot theme park at Walt Disney World Resort. Figment is meant to be the literal embodiment of the phrase "figment of the…
- Downloads
- 199
- Likes
- 72
- Rating
- 4.6
P
PrintablesAntonio Valente
Chad Moai Sigma Whistle
Whistle in a moai head, simply the chaddest whistle in the world
- Downloads
- 191
- Likes
- 21
- Rating
- 5
P
PrintablesCikro
Sigma ROX4 Speedometer Holder
Sigma ROX4 Speedometer Holder for fix with cabel ties
- Downloads
- 190
- Likes
- 18
- Rating
- 5
P
Printablesrackhamb
Anamorphic Lens Mod for Sigma 18-35mm f/1.8
This is a small mod that can be screwed to the back of the Sigma 18-35mm f/1.8 lens that makes the image appear like that of an anamorphic lens, mainly by elongating the bokeh. This effect can be seen pretty clearly in this video by "We…
- Downloads
- 189
- Likes
- 21
- Rating
- 0
P
PrintablesKaisers Wolf
Sony A6400 & Sigma 18-50mm Scan
Dimensionally accurate 3D scan of A6400 & Sigma 18-50mm Some surfaces were unable to be scanned correctly, however overall shape is accurate. Basic mesh repaired model provided, however the repaired surfaces may not be accurate.
- Downloads
- 188
- Likes
- 9
- Rating
- 5
P
PrintablesSam
Sigma ROX GPS 11.0 Aero fixation (50mm version)
50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827). Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter. Zusätzlich wurde die Lenker-Fixierung leicht…
- Downloads
- 185
- Likes
- 22
- Rating
- 5
P
PrintablesDa Designer Boi
Sigma/ Troll Face Keychain
Enjoy this Sigma/ Troll Face keychain! You can use it to add a hint of personalisation to your belongings, pin it to your shirt as a badge, gift it to somebody, and many more! Please note: This is an AMS version if you would like to print…
- Downloads
- 182
- Likes
- 18
- Rating
- 0
P
PrintablesEmely
Sigma Aura 60 GoPro Mount
I had problems positioning my Sigma Aura 60 light straight on my handlebars because of space problems. So I came up with the solution of hanging it under my Garmin Edge mount using a GoPro-Adapter. So I designed a holder for my lamp to…
- Downloads
- 180
- Likes
- 11
- Rating
- 0
P
PrintablesJulien Mairy
Sigmund (Sigismund Schlomo) Freud - Bust
Sigmund Freud – Buste Description et contexte (FR) Ce buste représente Sigmund Freud, figure fondatrice de la psychanalyse et l’un des penseurs les plus influents du XXᵉ siècle. La sculpture est directement inspirée de la photographie la…
- Downloads
- 177
- Likes
- 11
- Rating
- 0
P
PrintablesAlex
Mimigma für Halloween
Mimigma hat sich einen Kürbis übergestreift! dieses Modell hat mehrere Teile um es gegebenenfalls mit Lichtern auszurüsten. Leider habe ich kein MMU und musste es anmalen (ich gelobe Besserung). Verwendet beim Druck unbedingt Stützen! Ich…
- Downloads
- 176
- Likes
- 104
- Rating
- 5
P
PrintablesLopatka
Sigma 170-500 Lens Hood
This is a lens hood for the Sigma 170 to 500 telephoto lens. This is the second lens hood I designed for myself, and yes, I'm pretty hard on my cameras and equipment. Most of my glass is Nikon, and it is easy to get replacement parts for…
- Downloads
- 176
- Likes
- 4
- Rating
- 5
P
PrintablesChristian Englmeier
SIGMA Blaze mount (GoPro-Mount)
Bracket to attach the SIGMA bubble tail light to a GoPro Mount. The advantage of this holder is that the SIGMA Blaze does not need to be modified. The original side "wings" which serve as rubber holders of the original attachment, do not…
- Downloads
- 173
- Likes
- 16
- Rating
- 5
P
PrintablesEK_3D
SIGMA Bike Computer Mount - NEW VERSION (V2)
Changelog: 2023-03-16: Added new version for handlebar diameter 25.4 mm, as requested (offset 21 and 22 mm). Changelog: 2020-11-24: Added new version with 5.0 mm offset, as requested. And changed file names according to screenshot…
- Downloads
- 171
- Likes
- 24
- Rating
- 4.67
P
PrintablesSeilbahn_Modellbau
model Gondola Leitner 3S sigma cabins
a model of the 3s LEITNER Gondola
- Downloads
- 169
- Likes
- 14
- Rating
- 0
P
PrintablesSkalex
Sigma Aura Bike Lights Improved Mount
Ever been annoyed by the mount that came with your nice and bright Sigma Aura bicycle lights? You just cannot detach the light from the mount, instead you need to remove the whole mount. When you attach the mount, you have to align the…
- Downloads
- 168
- Likes
- 22
- Rating
- 5
P
PrintablesDerrickLA
Delta Sigma Theta Christmas Ornament
This is a simple Christmas ornament for the Delta Sigma Theta sorority.
- Downloads
- 168
- Likes
- 15
- Rating
- 0
P
PrintablesTelani
Medtronic Paradigm 7 Series Belt Clips
I wanted a printable pump clip that didn't have layer line weaknesses, so I designed the horizontal clip for myself. A couple other diabetics requested variations. Print Info All print without support, enable bridging in your slicer if…
- Downloads
- 167
- Likes
- 23
- Rating
- 5
P
PrintablesZYSSAi
Hyundai Clutch Aligment Tool
This is an aligment tool for centering the clutch of a Hyundai Tucson 2017 1.7CRDi 2WD MT. It can surely fit for other models. My clutch was perfectly replaced with this aligment tool!
- Downloads
- 165
- Likes
- 18
- Rating
- 0
P
Printablesuhltimate
Mystical Cube Labyrinth: Navigate the Enigmatic Maze to Freedom! Print-in-Place
Unlock the thrill of the unknown with our Mystical Cube Labyrinth! This captivating puzzle cube houses an intricate maze that challenges your wit and patience. Maneuver your marble through the twists and turns, solving the enigmatic…
- Downloads
- 164
- Likes
- 54
- Rating
- 4.67
P
PrintablesAngelius
Garmin/Sigma Rox 11 Backback mount
After printing, you have to glue all parts together. To attach the mount to the backpack you still need double sided, 10mm wide velcro.
- Downloads
- 163
- Likes
- 19
- Rating
- 0
P
PrintablesTatie Devouvres
Enigma wheels
It is a coding/decoding "machine" that I designed from scratch for an Escape Game (my very first design). Each wheel has a different number of spokes (2, 3, 4 or 5) that gives numerous possibilities in the game: 2 and 3 spokes wheel:…
- Downloads
- 162
- Likes
- 27
- Rating
- 5
P
PrintablesPossum Wagon
Sigma 18-35 Lens Hood
This is a replacement lens hood to fit the Sigma 18-35mm Art lens. The lens is 72mm thread but I use 77mm filters with an adapter. With the adapter it wasn't possible to still use the stock lens hood. I created this hood so that it can…
- Downloads
- 162
- Likes
- 14
- Rating
- 5
P
PrintablesMo0611
- Downloads
- 159
- Likes
- 15
- Rating
- 0
P
PrintablesAngelius
"e*thirteen Base" Mount for Garmin/Sigma Rox 11
An other mount for my Sigma Rox 11 (Garmin Base). This time for the e*thirteen Base (40mm) Stem . May be usable for other stems too. You need two M3 countersunk screws ... i used my dermel to shorten them.
- Downloads
- 156
- Likes
- 13
- Rating
- 0
P
PrintablesPrestonmakesstuff
Sigma Keychain
It is a small keychain that i printed at 80% infill and it came out well, attached with a carabiner.
- Downloads
- 151
- Likes
- 10
- Rating
- 4
P
PrintablesConstantine
36mm Film digitizer for a 72⌀ Sigma lens
A simple design film digitizer I have made in fusion, works great. This design was made for 18-300mm Sigma Macro Lens (No idea if you can fit it on another lens so keep that in mind) Extension tubes are required for being able to focus so…
- Downloads
- 149
- Likes
- 23
- Rating
- 0
P
PrintablesWaldmops
Lampen halter Gopro Befestigung / Light holder GoPro mount (Sigma Aura100)
Sigma Aura 100 gopro Halterung /Sigma Aura 100 Gorpo mount
- Downloads
- 141
- Likes
- 9
- Rating
- 5
P
Printables20n
SIGMA Blaze Halterung
Dieses Modell ist eine Halterung für das SIGMA Blaze Fahrradrücklicht mit Bremslichtfunktion. Die Halterung wird mit einem Verschluss an die Sattelrohrschelle befestigt. Das SIGMA Blaze Fahrradrücklicht wird von oben in die Halterung…
- Downloads
- 141
- Likes
- 3
- Rating
- 0
P
Printables3dprint.pe
BCN3D SIGMA Upgrade to 1.75mm
TRABAJO EN PROCESO Con este upgrade convertimos cualquier SIGMA a filamento de 1.75, usa extrusores Titan y Hotend V6 de E3D Original. Hemos respetado todos los componentes originales de la impresora, los ventiladores, el termistor y el…
- Downloads
- 138
- Likes
- 16
- Rating
- 0
P
PrintablesToby3D
Sigma Aura 80 to Gopro Quick Release Mount
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
- Downloads
- 138
- Likes
- 11
- Rating
- 5
P
Printablesmybrainwaves
Paradigm ADP Wall Mount Speaker Bracket
I recommend printing this with a high density and in the orientation displayed in the photos. Also Known as the Paradigm 2090000015
- Downloads
- 134
- Likes
- 4
- Rating
- 0
P
PrintablesErlikhan AVCI
Sigma Profile 20x40 mm
Sigma profile 20x40mm for ur test projects
- Downloads
- 132
- Likes
- 4
- Rating
- 0
P
PrintablesJohannes
Sigma Bike Computer Halter V2
Better Version of the bike computer holder. You will just need two M3 srews (10-12mm) an two M3 srew nuts. Fits for handlebars with 31.8mm diameter. Just use the original base and screw it to the holder. Printed it with Sunlu PLA+. You…
- Downloads
- 128
- Likes
- 16
- Rating
- 0
P
PrintablesFresh Print of Bel Air
H0 Bahnsteigmuster V2
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 2 in 55mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
- Downloads
- 127
- Likes
- 10
- Rating
- 0
P
PrintablesCTX
Sigma buster 1000 goPro mount adapter
Replacement goPro mount adapter for Sigma Buster 1000 light with a spring lever to optimize longevity
- Downloads
- 123
- Likes
- 4
- Rating
- 0
P
PrintablesHazel
Sakura Pigma Micron Pen Holder
A pen holder that uses the pens clips to stay in place, so you know what size you’re getting, kept the filament and size to a minimum, had enough of the flimsy packaging these fineliners came in. If you have solidworks you could change…
- Downloads
- 123
- Likes
- 33
- Rating
- 3.5
P
PrintablesFresh Print of Bel Air
H0 Bahnsteigmuster V3
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 3 in 45mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
- Downloads
- 122
- Likes
- 7
- Rating
- 0
P
PrintablesRAFATICO
MAQUINA ENIGMA MODELO Ω
Réplica de una Máquina Enigma (funcionamiento manual) con tres rotores intercambiables. Con ella podrás cifrar y descifrar mensajes a partir de una palabra clave. Disfruta con este diseño de la Máquina Enigma modelo Ω . Se adjunta…
- Downloads
- 121
- Likes
- 14
- Rating
- 0
P
PrintablesP3D Print Magic
Bambu X1/ X1C Figment Door Handle
I wanted a fun way to identify my printers so I created this Figment door handle model and a Stitch door handle model to replace the default Bambu Labs door handle on my X1 Carbons. I hope you all enjoy it as much as I do! Stitch door…
- Downloads
- 120
- Likes
- 48
- Rating
- 5
P
PrintablesRybaMike
RC car aligment tools
Alignment tools made for Losi Mini B but likely work with others. 8 mm hex with 4 mm shafts. Started with using calipers or ruler to measure toe and camber, then i added the levels from amazon.…
- Downloads
- 120
- Likes
- 37
- Rating
- 0
P
Printableswalndyn
Sigma 100-400 E-mount Tripod clamp
The original Tripod clamp was just too expensive so my friend and I designed our own 3d printable mount that is as sturdy and rigid as the original one. The hole thing is ArcaSwiss compatible as well. It is made up of 2 parts for better…
- Downloads
- 119
- Likes
- 13
- Rating
- 5
P
PrintablesDreddpunk
Ikea Skadis Vallejo Pigment Holder
Hello, news from me with a usefull pigment holder
- Downloads
- 119
- Likes
- 15
- Rating
- 5
P
PrintablesPlantagoLabs
BigMouth: A Simple Item Grabber for the XRP Plateform
This is an actuator for the XRP platform that allows to take and move objects on the floor, and adds a lot of personality to the robot. This model was designed to be used in robotic competitions, such as the FIRST robotic competition,…
- Downloads
- 117
- Likes
- 31
- Rating
- 5
P
PrintablesTwo Wheels Online
Sigmund FreudMarker
"Dive into the depths of the mind's paradoxes with our Freudian-inspired bookmark, the FreudMarker. Just as Freud explored the complexities of human behavior, the Freudmarker bridges the gap between surface-level reading and the hidden…
- Downloads
- 116
- Likes
- 9
- Rating
- 5
P
PrintablesPhototoxin
Age of Sigmar Mysterious Terrain Dice
A dice/marker for indicating which type of Mysterious Terrain each piece is for Age of Sigmar.
- Downloads
- 114
- Likes
- 11
- Rating
- 0
P
PrintablesZilli341
Reversible lens hood for Sigma 30mm f/1.4 DC DN
I bought the lens second hand and it came without the lens hood, so I designed a replacement. The field of view isn't obstructed at all, and you can still (barely) access the focus ring with the hood reversed. I printed it at 0.2mm with…
- Downloads
- 112
- Likes
- 6
- Rating
- 5
P
PrintablesTheAbidingOne
Bike Clip SIGMAR to SELLE ROYAL
Hi, this is a clip to fit the SIGMAR NUGGET II bike light to the SELLE ROYAL ICS sattle system. First print both split parts “right" and "left” (70%infill 3 perimeters) connect the rubber band of the NUGGET II to the clip push the clip…
- Downloads
- 112
- Likes
- 10
- Rating
- 0
P
PrintablesHitLuca
compact 4x3 35mm pigment/wash/paint holder
A simple holder for my model making pigments, to avoid having them all over the place when I'm not using them. It's a 4x3 design, with space for bottles up to 35-36mm in diameter (based on your printer tolerances). Tested and working…
- Downloads
- 111
- Likes
- 11
- Rating
- 5
P
PrintablesCodemer
75mm Spool for D3D Sigma Filament refills
I designed this spool to fit a 75mm D3D Sigma filament refill using minimal filament to make. The slots in the outer spool make it easy to load the filament before cutting its zip ties. The SCAD files are included to provide a starting…
- Downloads
- 111
- Likes
- 7
- Rating
- 5
P
Printablesym-29
Square Hood for Sigma 18-50mm Lens
I liked the design of the square hoods for the fuji cameras, so decided to replicate it for the lens I have. I've not seen much vignetting with the lens, but haven't tested it fully so can't guarantee it is vignette free.
- Downloads
- 111
- Likes
- 8
- Rating
- 0
P
PrintablesSBVideo
Sigma 14-24 2.8 E-Mount Lens Cap
My friend keeps losing his Lens Caps so I took some time and modeled him cheap replacements. The Fit is very tight. You might want to scale it up a little if you prefer a less tight fit. I printed this on my Bambu P1P in around 30 minutes…
- Downloads
- 110
- Likes
- 4
- Rating
- 4
P
PrintablesDarkMarkZX
Sigma action figure
Super poseable Sigma action figure, armed with removable laser daggers and forehead laser beam! Comes with two sets of hands. His double-jointed knees and elbows allow for a lot of dynamic poses. Stands almost 19 cm tall and scales well…
- Downloads
- 108
- Likes
- 56
- Rating
- 0
P
Printablestubridy94
Age of Sigmar Battle Box organiser v1
Here is a battle box of my own design which I use to store most of my parts for Age of Sigmar games. The box is a simple stacking system which comprises the following components: A large dice tray which houses the other components. I have…
- Downloads
- 108
- Likes
- 6
- Rating
- 0
P
PrintablesDreamfinder_1983
Figment from EPCOT
Figment is a small, purple, dragon-like creature who serves as the beloved mascot of Epcot's Imagination! pavilion at Walt Disney World. Created specifically for the "Journey Into Imagination" attraction (which debuted in 1983), Figment…
- Downloads
- 106
- Likes
- 14
- Rating
- 0