Search results: indra

Sort order

49 models

P
PrintablesKalleKnall

Windmill Windrad Wind turbine

Just for learning to model Objects ;-) You need: 3 x M3 Squarenuts 3 x M3 Screws 2 x Ballbearings 1 x Motor/Generator Update 22.05.2018: added a Baseplate with mount for a pipe Print instructions Category: Buildings & Structures Print…

Downloads
930
Likes
95
Rating
5
P
Printableswlfmario

Wind turbine model (Windrad Modell)

Kleines Windrad Modell Maße ca. 200 mm x 100 mm. Als Motor habe ich ein 3-6 Volt Getriebemotor verbaut.…

Downloads
348
Likes
11
Rating
5
P
PrintablesMB

180 mm Windrad ( Wind wheel ) 6 Flügel

Das Windrad wird in zwei Teilen am besten einzeln gedruckt. Nach dem Einsetzen der Kugellager, (siehe unten) wird die untere Abdeckung aufgeklebt. Vor dem Aufkleben unbedingt den Gleichlauf kontrollieren und ggf. korrigieren. Es schadet…

Downloads
315
Likes
40
Rating
0
P
PrintablesMarkus Eissler

Windrad (seit 2021)

Im Jahr 2021 begann ich mit dem Design und dem Bau meines Windrads, das ich im Laufe der Jahre angepasst habe. Die Explosionszeichnung zeigt die ursprüngliche Struktur, die auch die benötigten Einzelteile zeigt. Aber hier eine genaue…

Downloads
288
Likes
65
Rating
5
P
PrintablesJwillew

Windrad, Windturbine, Winkraftanlage - Modell ca. 1:500 - 25cm Hoch, Nordex N175/6.x , Vestas V172 - 7.2

Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…

Downloads
235
Likes
13
Rating
5
P
PrintablesKlaus

Savonius Rotor with Rahai profile, Wind Spinner, Wind Wheel, Wind Turbine / Windrad, Windturbine

Additional parts needed: 2x miniature ball bearing 8mm x 22mm x 7mm (eg. https://www.amazon.de/gp/product/B07HGXXX37/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&language=en_GB¤cy=EUR ) 4x screw M6x10 4x screw M6x16 8x nut M6…

Downloads
226
Likes
48
Rating
0
P
PrintablesBernati

Windmill - Windrad

Windmill (Windrad, Windspiel) for outdoor use - works for low and high wind speeds Uses separate bearing assembly and windmill body simply put on each other with a 10° cone. This allows for simple and effective wheater sealing of the…

Downloads
174
Likes
31
Rating
5
P
PrintablesjSamz12

Spindral - The Flexi, Print in Place Phone Stand Guy

My goal was to make a creepy flexi guy with extra-long limbs. Then I discovered that he could hold my phone. So, after a few tweaks, I was able to make him geared more towards a phone stand. There is also a couple other version with ball…

Downloads
166
Likes
53
Rating
3
P
PrintablesMario Koller

Windrad

Voll funktionsfähiges Windrad. Richtet sich nach Windrichtung aus. Wird noch benötigt: 2 Kugellager Typ: 6200 D: 30 d:10 b: 9 (offen, ohne Abdeckungen und Fett) Chromstahlstange durchmesser 6mm. Es wird alles gesteckt. kann nach belieben…

Downloads
147
Likes
12
Rating
0
P
PrintablesTechButterfly

Cup Holder for Mahindra 2538 Tractor

I recently bought a new Mahindra 2538 tractor. It did not come with a cup holder, so I decided to design one. It consists of two parts, a mount that bolts to two existing holes in the right fender, and the cup holder, which mounts on the…

Downloads
127
Likes
12
Rating
0
P
PrintablesXeNoMoRpH

Mahindra key chain

Dimensions: 59mm x 25mm For multiple colors: 0.00mm - 2.00mm (black) 2.20mm - 3.00mm (red)

Downloads
126
Likes
2
Rating
0
P
PrintablesJupiter

Windmill / Windrad

Windrad für den Garten oder Balkon Dank Kugellagern mit extra leichtem Lauf. Für den Gebrauch im freien Kugellager Typ “RS” (gedichtet) verwenden. Drucken aus UV-und Wasserbeständigem Material z.B. PETG, ASA, ABS etc. (nicht PLA) Kann…

Downloads
123
Likes
8
Rating
0
P
PrintablesShashwat verma

Mahindra New EV Logo (E-SUV infinity logo)

Mahindra's new EV logo is called the "E-SUV infinity logo" and its slogan is "Spark the New". This logo, unveiled alongside the new visual identity for their Born Electric Vehicles, represents infinite possibilities and a commitment to…

Downloads
105
Likes
4
Rating
0
P
Printablesgbombadon

Blox Fruits avatar Rip\_indra style

Supports - yes, tree I'm also working on a way to make a flexible avatar

Downloads
91
Likes
11
Rating
0
P
PrintablesGeorg Huonker

Windrad-800 (80cm Durchmesser)

Windrad-800 (English-Text is below) Das von mir entworfene Gartenwindrad mit 6 gebogenen Flügeln und einem Durchmesser von 800mm (also 80cm) ist ein schöner Blickfang für jeden Garten. Dank der Heckflosse dreht es sich immer gegen den…

Downloads
91
Likes
18
Rating
0
P
PrintablesAeonfly

Windrad / Wind turbine

Hier seht ihr ein kleines projekt mit einem Getriebemotor entstanden durch das interesse meines kindes an Windräder. Ich wollte dann einfach mal eins mit nachhause bringen :D. Ich habe lange getrüftelt und die Teile so einfach wie möglich…

Downloads
77
Likes
10
Rating
0
P
PrintablesIan Whitehouse

Devendra - Long-Draw Indra

This project is still being actively developed, there are some pieces I'm still working on. Spacer/Thumbhole stock and adapter for K18 and K24 are in progress, just need to finish up when work allows. Anyway, Devendra is a remix of…

Downloads
68
Likes
15
Rating
0
P
PrintablesBlacky51

Modernes Vertikal Windrad

mit PLA gedruckt Druckeinstellungen Füllung 15% Schichthöhe 0,2mm Stützen

Downloads
54
Likes
6
Rating
0
P
PrintablesKlaus505

Windrad

Ein Windrad für den Balkon oder Garten. In der Spitze ist noch genügend platz um Gewicht einzubringen (Mutter zB.) Hier eine Stückliste was ich noch dazu brauchte: 2 Lager 3x10x4 Carbonstange 3 x 30 Carbonstange 3 x 17 Carbonstange 3 x 24…

Downloads
53
Likes
4
Rating
0
P
PrintablesAcgames
18+

The source marked this model as adult content.

Downloads
50
Likes
14
Rating
0
P
PrintablesGeorg Huonker

Windrad-560 (56cm Durchmesser)

Windrad-560 (English-Text is below) Das von mir entworfene Gartenwindrad mit 6 gebogenen Flügeln und einem Durchmesser von 560mm (also 56cm) ist ein schöner Blickfang für jeden Garten. Dank der Heckflosse dreht es sich immer gegen den…

Downloads
42
Likes
3
Rating
0
P
PrintablesTtotheman

Rhino Sights Nerf (Indra sight remix)

I remixed the Indra PIP sights by captainslug to accept 1,75mm Filament pieces like fiber optics. I also redesigned the fastening mechanism to M4 screws and nuts. I designed the railraiser rearpip based on the original rear pip design by…

Downloads
37
Likes
16
Rating
5
P
PrintablesDemonicWillo

Fingerboard Grindrail

around 10 cm probably

Downloads
36
Likes
3
Rating
0
P
PrintablesIsaac7

OSS-class(Vindraon pattern)battlecarrier

This is a fan-made ship I wanted to 3D model. The Vindraon-pattern battlecarrier designated the OSS-class battlecarrier, is one of the largest Executioner-type capital ships that was developed by the defunct Covenant Empire. A rare sight…

Downloads
34
Likes
3
Rating
0
P
PrintablesSillybutts

Indra Passive Talon Magwell

This is a passive Talon magwell, similar to the one for the Caliburn made by CaptainSlug. This system uses 2 mag releases, like a wildcard adapter. However, instead of Talon and Katana mags, the two releases work on Talon and full length…

Downloads
32
Likes
6
Rating
0
P
PrintablesSillybutts

Indra Flat-Faced Plunger

Changelog: 8-24-21 2:10PM EST: Changed design to have the face part flat on both sides. This is a plunger for the Indra that has a solid flat face. This both keeps the plunger stem seal from moving, and practically adds a better seal for…

Downloads
30
Likes
5
Rating
0
P
PrintablesSillybutts

Thicker Indra Trigger

An Indra trigger that is slightly further forward. If you wish to print and sell this item, please contact me for licensing. I can be reached on Discord (Sillybutts#5905), Reddit (u/SillyTheGamer), or by Thingiverse comments. Print…

Downloads
27
Likes
4
Rating
0
P
Printablesloqk

Dota_2_Windranger mini with base

I've just added a simple base to this model and reduced it's size by about half using tinkercad Category: Games

Downloads
26
Likes
0
Rating
0
P
PrintablesSillybutts

Pump Action Indra Conversion

Changelog: 7-22-21 11:52AM EST: Changed foregrip to use Caliburn hole pattern. Changelog: 8-21-21 9:19PM EST: Completely replaced all foregrip files with versions that have the picatinny rail closer to the barrel to improve stability…

Downloads
23
Likes
4
Rating
0
P
PrintablesAtul R

Keychain - Mahindra Thar

A 3D Printable keychain featuring the Mahindra Thar car for its fans. Can be 3D printed by anybody . The model takes around 35 minutes to print in the standard settings. It is recommended that a keyring and chain are also used for…

Downloads
22
Likes
1
Rating
0
P
PrintablesSillybutts

Indra Extended Stock (4 versions)

This is a set of 4 stock spacers for the Indra! They extend the stock by 0.8 inches, 1 inch, 1.5 inches, or 2 inches. If you want, you can print the stockspacer part and use it as a hole drilling guide on an existing bButt print instead…

Downloads
22
Likes
3
Rating
0
P
PrintablesCyanCosmos

Indra Upgraded Plunger

I was having catch issues with my Indra when using any spring stronger than a k31, and I have heard many others are as well. This plunger fixed my issues. I highly recommend using an extended spring guide along with this part. This…

Downloads
22
Likes
6
Rating
0
P
PrintablesSillybutts

Indra Beavertail Grip

A beavertail grip for the Indra. This addition to the grip prevents getting "bit" in the hand by the trigger-catch linkage bar. There is also a version of the grip without the bottom "toe" of the grip. If you wish to print and sell this…

Downloads
20
Likes
8
Rating
4
P
PrintablesSillybutts

Indra Muzzle Collets

A set of muzzles for the Indra that have extra collets instead of screws to keep the barrel in place. This uses the standard collet screw/nut. If you wish to print and sell this item, please contact me for licensing. I can be reached on…

Downloads
20
Likes
4
Rating
0
P
PrintablesEric

Mindray Ultrasound Packet Gel Holder

Our shop no longer uses bottle gel and has switched to packet gels for our Mindray ultrasound on the floor. To store more gel, I modeled this simple gel holder. You could also use this for other ultrasounds with a similar design. The…

Downloads
13
Likes
2
Rating
0
P
PrintablesDr. Nerf

Sindragosa's Revival

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x198.89mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
11
Likes
2
Rating
0
P
PrintablesSpinDraw

SpinDraw – Pikachu (stencil disc Ø180)

Spin, click, trace… and Pikachu appears! 16 steps, one slot per click. Needs the SpinDraw Click Frame — print it once, it works with every disc. PRINT SETTINGS • PLA, 0.2 mm, no supports, flange down (already oriented). • 2 colours: white…

Downloads
10
Likes
1
Rating
0
P
PrintablesDexter56

Mahindra 485DI Tractor Front Hub Seal and Mold

Mahindra 485DI Tractor Front Hub Seal and Mold to make one out of rubber

Downloads
10
Likes
0
Rating
0
P
Printablesracerethan

Nerf Indra 3 Part Stem Undercut Fix for #2

A new 2nd part for the Indra 3 part stem. Adds the undercut fix that was applied on the 7/10/21 for the 2 part stem. Use the new sear with it as well. I used a 1/4 washer for better catch reliability. Category: Mechanical Toys Remix of…

Downloads
9
Likes
2
Rating
0
P
PrintablesSean Hesler

Mindray TE5/7 Ultrasound Trash Bin

Trash bin for the rear printer shelf on Mindray TE5/7 cart I whipped up in Orcaslicer I measured gaps around the velcro straps, it stays tight to the shelf Notch lets wipe dispenser dodge it ~366g of filament with supports and ironing…

Downloads
9
Likes
1
Rating
0
P
PrintablesInsertName

Sant Jarnail Singh Ji Bhindranwale

Sculpture portrait of Sant Jarnail Singh Ji Bhindranwale. Printed with 1 wall loop, 5% infill for weight saving and printed without support using 0.4 mm nozzle on a Bambu Labs P1S. Feel free to give any feedback below. The two extrusions…

Downloads
8
Likes
0
Rating
0
P
PrintablesSpinDraw

SpinDraw – Click Frame Ø180 (base for all SpinDraw discs)

The base for every SpinDraw disc. Print it once, then collect the discs! HOW IT WORKS 1. Put a sheet of paper on the table and lay a SpinDraw disc on it (numbers up). 2. Place the frame over the disc, with the START notch under the ▼…

Downloads
6
Likes
1
Rating
0
P
PrintablesTravis Goins

MAHINDRA ROXOR LOGO PLAQUE

I realized there wasn't anything for the ROXOR lovers out there so here you go. I'm going to keep working on more plaques.

Downloads
4
Likes
0
Rating
0
P
PrintablesJohnny Ralte

Mahindra Thar Dashcam holder/clip

Dashcam holder/clip for Mahindra Thar vehicle

Downloads
4
Likes
0
Rating
0
P
Printablesrg3d

IKEA LINDRANDE Wall Mount

Our son is collecting Tonie's (Figures which play music/stories) through a audio/music box. Available from amazon…

Downloads
3
Likes
1
Rating
0
P
PrintablesSubodh

Mahindra Window Shade Holder

Small holder that is stick to the window of the car to hold the window sun shade from inside. This is a small plastic component that is always lost. I created a copy of one that comes with Mahindra Window Shades however this can be used…

Downloads
0
Likes
0
Rating
0
P
Printables

MAHINDRA ROXOR LOGO PLAQUE

I realized there wasn't anything for the ROXOR lovers out there so here you go. I'm going to keep working on more plaques.

P
Printables

Mahindra Thar Dashcam holder/clip

Dashcam holder/clip for Mahindra Thar vehicle

P
Printables

Sant Jarnail Singh Ji Bhindranwale

Sculpture portrait of Sant Jarnail Singh Ji Bhindranwale. Printed with 1 wall loop, 5% infill for weight saving and printed without support using 0.4 mm nozzle on a Bambu Labs P1S. Feel free to give any feedback below. The two extrusions…