Thinkpad T480 Laptop stand with screw fixings
A remix of the original with support for fixing the stands to a wood desk using 5mm screws sat flush diagonally.
- Downloads
- 9
- Likes
- 4
- Rating
- 0
328 models
A remix of the original with support for fixing the stands to a wood desk using 5mm screws sat flush diagonally.
Trackpoint cap for Lenovo thinkpad keyboard. There are two types, a bulging one and a dented one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: SainSmart TPU Clear…
I designed this set of models to be replacement parts for the 1995 IBM ThinkPad 701C and 701CS laptops. The attached 3MF file is a project file created in OrcaSlicer that has everything laid out. I've also attached the STEP files as well.…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
If you don't want your Lenovo Gen 2 USB-C dock lying around on your desk, you can use this holder to mount it on the underside. These brackets allow you to slide the dock in and out, holding it securely to the table while still being…
A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
This laptop stand was designed for my Lenovo Thinkpad (16"), but it will fit for many other laptops as well for sure. Just check the dimensions. The Dockingstation fits perfectly under the laptop, wich makes your desk look cleaner and…
Diseño realizado por mi, echo en fusion 360, funcional y actualmente lo uso para mi notebook ThinkPad lenovo T14. Design made by me, made in fusion 360, functional and currently I use it for my ThinkPad lenovo T14 notebook.
Probably compatible with other Thinkpads
A minimalist laptop stand for holding a laptop vertically. Made for a Thinkpad but will work on others. v3 has a wider base for added stability.
This is the 3.0mm variant of the Lenovo Thinkpad Trackpoint cap. I printed it in TPU. It's a bit messy (being small format TPU) and probably would have printer cleaner on a 0.20mm nozzle, but the end result works GREAT on my Lenovo P1 Gen…
Under desk mount for Thinkpad usb-c and thunderbolt docks. Leaves the power button accessible and easy to locate under a desk with the convenient design. Uses either #8 or #10 screws in countersink holes for elegant mounting. Needs…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
The Power Button of my wife's Lenovo Thinkpad T570 was broken and get's stuck in the case. So i decided to make a replacement. I printed the button from Nylon. To Repair the Button you have to do following steps. Remove the battery…
ThinkPad E14 USB-C support for the docking station cable
It protects smart card readers from dust. It can also be used as a residue-free alternative to stickers for identifying laptops (when printed in different colors). It's completely flush when inserted. This way it cannot get caught…
Mount for Lenovo ThinkPad Hybrid USB-C with USB-A Dock. You can use is for wall or underdesk mounting. There is a cutout for the powerbutton and feet of the docking station., missing is a hole for the lock.
Design is a simple “foot” that supports a laptop vertically. Print two. "It's better than balancing your laptop on its edge!" Can be printed upright or on its side, no special settings needed. There's enough of a gap between stand and…
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
Enhance your video conferencing experience with the ThinkPad Stand, a precision-modelled stand compatible with the Lenovo ThinkPad T490s. This innovative stand elevates your ThinkPad, addressing the dreaded 'frog perspective' in virtual…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
A vertical notebook stand. Specifically designed for the Lenovo ThinkPad X1 Yoga Gen 3. The gap in the stand is 2cm wide, so it should fit any other notebook with about the same thickness (no guarantee of course). The stand is designed,…
I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
A simple stand for a Lenovo Thunderbolt 3 (gen 1 or 2) dock and a laptop.
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - Lenovo 90W Power Adapter holder (ThinkPad Universal USB-C Dock) 💡 💫 Recommendations PLA/PETG 0,2 mm layer no support
Filament: PETG Black infill: 15%
You can change the laptop angle and thickness in the Solvespace file.
Hi everybody, made my first 3D-Model. A wall mount for a Asus or any other 17" laptop (28cm of space). It has a 50° angle so you can open the screen and also use the keypad. If you scale it to 85%, you can use it for 15" Tips and…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470), For Thinkpad E480 E485 R480,…
I have a few monitor mounts at work I wanted to attach our Lenovo Thunderbolt 3/4 docks to in order to clear up some desk space. These fit snuggly over both ends of the dock and can be mounted to the monitor mount's pole using zip ties. I…
Print at what setting you like, no support needed. :)
I created this laptop stand for my Lenovo ThinkPad P16v Gen 2. It should hold other laptops as well, provided they are not higher than 26 mm.
Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.
Laptop Stand for the Lenovo ThinkPad USB-C Dock Gen 1 and Gen 2 (40AS) with sizes of 17.1 x 8.0 x 3.08 cm and the front connectors on the left side. Prints in 3 pieces (on Prusa Mini and above, rotate the long connector by 45 degrees)…
After getting a thinkpad T14 as new laptop i needed a new stand. I made a similar stand from scratch in onshape based on original stand i used previously The source:…
Prop up your ThinkPad! Prop up your laptop to reduce having to stoop over it on your desk. Your posture and back will be forever grateful! The base is propped up at a 60° angle lifting the screen 24cm off your desk You can open the screen…
A replacement hard disk drive cover for X200-series Thinkpad laptops (X200 X200s X201 X201s). No raft or support needed, the horizontal notch might need a little bit of cleanup after print to properly fit. Category: Parts
The left shift key on my Lenovo Thinkpad X1 Carbon 6. Generation broke. I didn't find another source where you get only this key alone. So I desigend a replacement and know it works like a new one. It has some really fine details so it's…
For a more ergonomic grip on the integrated pen. Printed standing with brim. small supports for buttons. Pen is held by friction, if sleeve is too tight, use some heat to fit sleeve on the pen.…
I designed this because I wanted extra desk space. You can mount the laptop either closed or open, if you wanted to still use your laptop screen when it's docked. The front of the stand features an opening so you can still use the…
How about I make this: ● Into this: ♥? Lenovo Thinkpad TrackPoint nub Replacement. Compatible with “Low Profile Soft Dome” keyboards (for example: Lenovo T450) If you are not sure which one you have, check out this Reddit post . It will…
Dubbed the “Lenovo Shoe” By experts (Me), this is a set of stands to allow for better airflow when you are using the Lenovo IdeaPad/ThinkPad on a deskmat or soft surface. Print 2, or extend the width of the stand and print one really long…
This is a case you can keep on your Lenovo charger to make the cord wrapping and transporting of the charger much neater. The notch in the middle allows the cords to be nicely held together using Lenovo's included velcro strap. This…
I've designed a holder to attach the dock to IKEA Skadis board. After importing the file, lay it flat on the side so that the hooks are parallel to the print bed. Make a copy and mirror it over the Z so you have a pair of holders.…
I use this adapter for faster and easier connection of my laptop at my office. Now i only need to plug in this adapter and it is connected with power, display and usb devices. For device connection, i use FITLONG 8-in-1 USB C Hub.
Battery cover to use the laptop without battery. Used on a T460p but it should works also for type 68/24Wh battery-like on T440, T450, T460, T470p, T440s, T450s, X240, X250, X260, X270, L450, L460, L470, T550, T560 and W550s-Serie. Snap…
This pen holder slides into the tablet side slot for the original Lenovo holder and fits pens up to 10.5 mm in diameter. I'm not sure if the Lenovo pens will fit as I use a compatible HP Active Pen. Print the holder in STL orientation…
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Remix of thing:4463146 that keeps the laptop at a lower angle Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any PLA Any How I Designed This =================== Category: Computer
The model consists of two parts: right foot holding the docking station and the ThinkPad left foot which attaches to the thinkpad only The right foot has a hole to access the power botton. The Lock for the key and the Kensington Lock is…
U can use X1 tablet Keyboard as USB KBD. Please prepare following materials. -Strong small Magnet*2 -Any USB cable. -Al foil or any conductor. Category: Tablet
If you like the model, please give a like 💟 and post your prints 📸. 💡 Underware - Multiboard - ThinkPad Universal USB-C Dock holder 💡 💫 Recommendations PLA/PETG 0,2 mm layer yes support - for the lip on the top that holds the dock in place
This is a printed adapter case for a USB-C trigger / power module that will give out 20V for the laptop. See more here:
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
A HDD cover thats fits lenovo thinkpad models x60, x60s, x61 & x61s.
Since the feet of this Lenovo keyboard are very likely to break, I designed a new version for it that has a decent material thickness and printed it out of transparent PETG (very stable) with 100% infill. There are 3 Versions: - original…
Based on the Lenovo Thinkpad workstation W530. It was scaled down by 1:5 except the hight which was scaled by 1:3 to allow for a more rigid hinge mechanism. Clip the display onto the base. Display then can be opened and closed and should…
Cable Clip for Lenovo Thinkpad Power Charger. It was made for the same size of wire. The power adaptor for 220v has similar thickness than the usb-c wire. Print Settings Printer: Kuttercraft Rafts: No Supports: No Resolution: 0.2 Infill:…
Camera cover for Lenovo thinkpad T14 Print Settings Supports: No Infill: 100 How I Designed This Category: Computer
Three part printable simple stand for the Lenovo P14s ThinkPad (Gen 1). Steep angle to bring the monitor up high.
Mount to secure lenovo thinkpad dock under a desk or on a wall. Made specifically for model number LDC-G2, but may work for others. Print Settings Rafts: No Supports: No Resolution: .3 Infill: 24 Category: Office
I couldn't find a mount for the usb-c mod for my T430, I tried one for the X230 ( https://www.thingiverse.com/thing:3732642 , the plug is from that model, I already printed it, so...) but it doesn't fit correctly on the T430, so I modeled…
Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…
Thinkpad Think Track Cap (Thinkpad 13 ~2014) Cap mounts on the ~2.4mm square stick. between tje GHB keys. Category: Computer
I created this to stop worrying about pulling on the charging cable for my ThinkPad L380. Slides on top of the OEM USB-C plug and can then be inserted as a whole unit. I made the top support thin enough so you can close the lid, though…
This model is a heart-shaped replacement for the TrackPoint on Lenovo ThinkPads for modern ThinkPads. Ideally this print is printed with foaming TPU as this provides the best grip and doesn't risk damaging the screen when closed, but of…
Ink pad with honeycomb needs to be perfect aligned. Insert it into the white gap and screw it (don't overtight) onto the back to hold it in place. 0.2 layer, 15% infill, supports on bed - best print orientation in photo Steps using…
Designed for keeping the Lenovo USB C Gen 2 dock and T14s Gen 1 laptop on the right hand side of the desk. Includes a foot to support the laptop should you want to keep the dock of to one end. Support me on ko-fi.
I used #10 1" screws, and only needed two screws per bracket. I used 3 brackets in this case.
VESA 100 mount for the ThinkPad Universal USB-C Dock (Part Number: 40AY0090US). Intended to be used with a vesa extension plate to offset it from the monitors vesa mount.
Easy print with no effort at all. Make sure to print it slow. Otherwise, you will get a fail print.
Simple blank card to insert into a Thinkpad's express card slot, to prevent dust getting into the open slot. Tested on a Thinkpad X230, but should be compatible with any express card slot.
An help to stand up the Lenovo ThinkPad USB-C docking station - Inside dimensions → 81mm x 31mm - Outside dimensions → 120mm x 35mm I don't know if this works with every Lenovo ThinkPad USB-C docking station. I test it with the Gen2 Type…
I needed a place to store that ugly docking station. So I made one for the Thinkpad USBc dock. You can mount it under your desk, with double sided tape, Gorilla-tape will work fine. There are two options, one with a full cover, and one…
An under desk mount i designed for the Lenovo ThinkPad USB-C Dock Gen 2. When mounted at the desks edge the power button will protude and is perfectly reachable. The USB Ports and the audio jack are accesible from the front. If mounted…
Simple design prints lying on the side without supports -> Please print 2 for the open version In the slicer you can easily change the z height of the model to your liking, but don't change x and y 15% infill should be enough
Lenovo ThinkPad Netzteil Halter 90W Wied mit 30% Gedruckt
A simple but durable laptop stand for Lenovo ThinkPad laptops.
The USB C seems to be to weak, when put under lots of stress. This is just for emergency case, maybe stumble over the cable. It is attached with double sided tape with ~1mm thickness. Works as expected. Best printed on the small edge.…
Unfortunately the exhaust on the t480s is on the right side, while having warm air blown onto your mouse hand may be fun in winter it definitely isn't in summer so I decided to mitigate that. From my testing it did not decrease cooling…
FN Key Blocker // Lenovo ThinkPad
Print the two sides, insert screws. Screw under desk or on wall with the dock clamped between. You should be able to easily remove the dock if needed due too the brackets pivoting at the screw holes.
I made this wall-mounted holder for mine the Lenovo ThinkPad Laptop 65W AC-DC adapter to organize the workspace and manage cables in the office. I printed it from PETG and used a 100% infill. Like what you see? Click an image below and…
I made this in order to reduce the desk footprint of my thinkpad t480s which I mostly use attached to a docking station and external displays while at home. It may fit other thinkpads and other laptops of similar shape and thickness…
https://github.com/orbitinstasis/T420_KB_BLE/
Printed Rubber Feet for the Battewry Side of a Lenovo Thinkpad x230t There are two Models Provided. The one on the Laptop is slightly Smaller then the two on the Battery. Printed with Extrudr Flex (TPU) 100% infill no Supports.
This is a smart card reader cover for thinkpads. It is designed for T480 but it should work on others too. To make it look perfect, sand with ~600 sandpaper. Height of thinner part: 1.25mm Height of thicker part : 1.5mm Print Settings…
Just to have a little bit less mess on the table. V1 - smaller, screws under the hood V2 - with screw openings on the wings Layer 0.2mm 4 Perimeters No Supports No Brim PETG or whatever For 3mm screws with sunken head.
Print 2 and slide onto each end of the hinge side of your laptop. I printed mine in Atomic PETG-CF.
A holder for a Lenovo ThinkPad P15 Gen2 with holes for the laptop's connections and fan
This is a remix of 4sStylZ of a release by @pansono. I scaled up the width of the leg by 2.75% and added some parts that I'd call snappers. Why? Because with these, the leg folds back and forth with a satisfying snap, just like the…
A vertical laptop stand to perfectly fit a Lenovo ThinkPad T14 Gen2. I needed to increase my desk space and this worked splendidly. No supports needed.
Problem: I want to organize my desk wires while also being able to take my laptop power supply (charger) on the go. Solution: This Lenovo 170W power supply holder can be mounted with adhesive or screws (drill holes as desired). There is…
Remix of this holder. Provides a better airflow if you're keeping the CPU and GPU running most of the time. Print Settings Printer: Artillery Sidewinder Rafts: No Supports: No Resolution: 0.2 Infill: 15 Category: Office
I got a Lenovo Thinkpad X1. It has a flashing red LED on the lid. I immediately thought of two options... Bender or Terminator. Position the tip of the cigar exactly on top of the LED. ;-) Printed in PLA - the color changes are included…
My Lenovo Thinkpad T420 came with a 7mm drive and appropriate rubber rails, but I wanted to fit a 9.5mm drive in. This solves that. I guess this would be most like the original if you printed in TPU, but I printed in PLA+. I think the…
Decided to swap my 2.5" SSD for a faster NVMe version. While not officially supported, the X260 can accept NVMe drives, which improves performance (even 3x fold!) and reduces power consumption (barely, but it does) You can buy the cable…