Counting matching models…
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Universal Tool Handle for Countersinks and Other Tools – Ø4 to Ø16 mm A precise and ergonomic tool handle for countersinks and other tools is essential for clean and controlled manual work. Whether countersinking screws, deburring,…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Hello, Welcome to my profile, full of models and miniatures :-) I have articles for you on creating a chain. The chain is really strong and can hold up to 10kg of weight. It prints really well. No need to use supports! If you are…
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
A mini 'cuff link only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the cuff links, so I made a mini version that holds 2. There's also a credit card sized version with x6 here. Key Features: Includes one…
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
After slacking/slaving away all week long in my T-shirt and jeans, I like to dress up in my stiff collar shirt with cuff links. Don’t we all?! So you’re going to want to use this ready-made cuff link base design for all your wonderful…
Chain links with an opening that allows them to be connected together. Includes three different designs, which can be scaled up or down to suit your specific needs. Printed in PLA with 10% infill and no raft.
Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Old Communist C's. Very well done according to the real model. My kids absolutely love it :-). They build several meter chains from it :-) It prints really…
Пробовал собирать сверла по дереву в компактный узел. Цель сборки - хранить сверла в футляре отвертки. Сложности в проекте представляли собой зенкерные насадки. Gcod is made for PLA, but you can use any hard plastic. Please take a look at…
A great toy if you are bored. Mine squeaks so you may need to add oil👍
Printed mine in bulk PETG and draft mode, no need for fancy layers or support. It is possible to mount the drives with M3 screws, but I dont thinkt that is needed. Uploaded a few variants if you dont want to use openscad to change the…
Warning! Dont put eggs without schell into the egg holder. Its not good for your health.
you'll need: Consumables: ½" plywood (or OBS) leather (for Shield straps) belt buckle pillow fluff paint super glue gorilla glue? ½ inch bolts (x4) threaded inserts (x4) [T-nuts] wood filler reflective gold contact paper Tools: Drill…
This is vor decoration or cosplay only, if you need something to hold a little weight consider the
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
A remix of https://www.thingiverse.com/thing:2835053. The original links would break from time to time while taking the print off the bed. The links where updated to be larger and stronger.
After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…
Kyle's Screw Together Baseplates are amazing but I don't have heat insert threads. So I've found a way to connect them together with my own design of links. Just print two parts of it and connect them together as seen on pictures. Use…
These are replacement/extension links for the Elegoo Centauri Carbon cable chain. I modeled them based on the original chain to help fix the tight bend radius at the toolhead. A lot of people on Reddit and Discord have noticed that the…
What is it? It's a drinks (beer) carrier that can hold four standard-size cans and/or bottles and can fold down for easy transport, can lock down with magnets. Great for taking beer to parties, sporting events or drinking it alone in a…
They come in both the standard 5 and 21 linking chains. these are the Lego standards. BrickLink Reference Catalog - Parts - Category Chain Print: Infill: 100% Layer height: 0.1, 0r 0.12 print with brim, or raft for best adhesion…
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
Scale as necessary, recomended 1mm height.
This is a full-system remix that "normalizes" the link components of the popular articulating Pi Camera mount. In the original design, different parts were varying lengths; this set offers full flexibility with a uniform aesthetic.…
some quick print in place chain and linking piece for connecting to things. Category: Props
This is a remix from the Snakez Bracelet. I removed two links to make a 16 link version, so it can fit smaller arms. Category: Bracelets
Hello there! Simple single-colour Rebel Alliance and Galactic Empire themed drinks coasters, plus a caddy to put them (or any other 90mm or smaller coaster) in for storage. Dual-colour filament swap coasters for the Mandalorians…
This is a modification of the rogerquin cable chain that allows the ends of the chain to be secured in place. This supports the extruder cable even better and keeps the entire chain from shifting. Motherboard Link: This link has been…
Extended camera arm links Available lengths (measured distance between mounting hole axis): 50 mm 75 mm 100 mm 125 mm 150 mm Print settings: Support needed (just like the original model) if printed standing upright. No support needed if…
Introducing the Hexahive: an insect hotel designed in the optimal shape of a hexagon. This model provides a welcoming shelter for beneficial insects in your garden or outdoor space. Using M3 screws to mount to any wall I recommend…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
The STL files may need scaling due to the intricate detailing of the badge. Recommended layer height 0.15mm (Quality). No support material is required.
This "Runestone" drink and coffee cup coaster is richly decorated with ornaments and runes from Celtic culture. It's easy to print and looks simply stunning. The model is printed face down. The default dimensions are: 90 mm x 90 mm x 10…
AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…
Please make sure, your print can handle the weight of your expensive camera before using this design. I do not take any responsibility for broken equipment. Onshape-Link:…
Have you ever wondered why your BMW doesn't look complete? Because the most important component does not hang on your key! The BMW M-series keychain will finally complete your BWM, download it now and please like the model and share your…
If You are glad with my work You can buy me coffee: https://ko-fi.com/szarkadiusz Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans Be true legend Old tales said that You need fo finish Your drink in one sip ! Be Brave…
Drinks can dispenser sized for UK soft drink cans (330ml, ~66mm diameter and 125mm height). This is my own design, created after difficulties finding or adapting an existing design for UK can sizes. Optimized for a 0.6mm nozzle (but…
Need a bigger boom? This upsized version of the Mini Nuke Can Cup is built to handle your 16oz energy drinks, tallboys, and mutant-sized beverages — while still looking like it belongs in a Red Rocket vending machine. ⚡ What's Inside:…
Hold paint or nail polish or anything else that is about this same size. Print instructions 2 different sizes.
The holder has been designed to hold 4 cork-backed coasters measuring 10cm across. The holder stands at 27.47mm high and is 114.87mm at it's widest point. We're printing this on the Creality K1 in PLA+. I also have these on Cults3D,…
When I tried printing the original ball and socket links, the socket pieces would snap off when assembled. So I made this stronger version which prints on its side. The friction fit is nice and tight. I did have one piece split lengthwise…
A 14-link chain. Category: 3D Printing Tests
I'm a huge fan from the Zelda franchise, so it was a tremenduous joy to model this character.Its was a great opportunity to study more about character design.Completely 3D print ready, I hope you all enjoy it! 6 separate pieces Note:…
Thanks to francfalco's design which fit very well for this Apple Watch charger which is very decorative and handy. I put an Apple logo box inside the whale where you can put some small jewelery of phone connection pins/ends etc. You can…
Linked dipole antennas and end-fed half-waves are very popular portable antenna designs. These tiny links make it easy to connect or disconnect a section of the antenna to tune to different frequencies. Plug the 2mm banana plug into the…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
Superman logo cufflinks. Easy to print and snaps tightly together. !!! Now with a multi-material version !!! The cufflinks hinge is inspired by the Star Wars Cufflinks by belch: https://www.thingiverse.com/thing:104758 I needed superman…
Ihr benötigt: Ca. 46cm PTFE-Schlauch ID 2mm OD 4mm für den Neptune 4/pro. Für größere Drucker müsst ihr den PTFE-Schlauch selbst abmessen. 2 Stück PC4-M6 Pneumatik-Fittings 2 Stück M3x20 Schrauben für den Standard Mount am Extruder oder 2…
A friend wanted a 4-way drink caddy to free up a hand. The ones I could find wouldn't fit on my Anycubic Kobra Go's small print area of 220x220x250mm so I came up with this design. The inner diameter of the cup holding sections is 80mm…
This is a parameterized sponge holder that hangs on the center separator of your sink and can hold two sponges. If you want it single sided, there are two other versions: Right Sponge Holder Left Sponge Holder It's parameterized so I…
Print with 0.2 mm max. layer height with PLA Print with 0.15 mm max. layer height with PETG (less Stringing and “Blobs”)
I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . Many designers use CAD programs suitable for mechanical design that have problems opening and…
This chain was created in fusion 360 and can be printed in links of eight or singles. they can be merged together by printing partly slipping a new link in and then continuing the print.
One of my kids loves Numberblocks and has several sets of Numberblock themed MathLink cubes. One link per cube isn't enough to keep larger models stable. So, I designed additional ‘links’ to snap in and create additional connection points.
This Valentine’s Day, give the gift of love with a sleek, practical keychain (measuring 111mm x 25mm x 6mm) — a true Link of Love . Featuring 7 flexible, articulated links with heart-shaped cutouts, it symbolizes the unbreakable bond of…
I've been printing this lovely little trilobite with a 0.6mm nozzle and I've noticed that with any small extrusion error the vertical sections of the links appeared quite thin. So, I thickened the links a little to make sure there…
Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here ). With the wire I used (simple 1.5mm² wire from a local hardware…
Update: I've added the dragonscale mk 3.1 variant that can be used with the mk 9.x hex links, updates to other styles to follow. These scales are designed to be screwed into the chain hex links I designed to give a scale armor effect.…
I wanted to print this model for a friend that loves cute T-Rexes, but wanted both to make it durable and to fit a chain link without having a visible loop. Hope this will be useful to someone else, enjoy!
Took the original model into Blender and rebuilt a low-poly/sub-d version of articulated links. Also included the .blend file for easy editing. For commission/business enquiries please email me via [ [email protected] ]. Join my 3D…
Showing your stylish sense of printing with 3d printed cufflinks Simple cufflinks to wear Glue the stick to keep it in place Print instructions I included 2 files (cufflings_short and cufflings_long) for different sizes.
I love this model!! Thank you for McGybeer for sharing it! I have printed several hundred of these to donate to Toys for Tots, and thank you again to McGybeer for allowing us to! There is just one small issue with the spiral version,…
A simple orange drinks coaster I designed for our daughter. Please do let me know if you use it!
🚗 Practical Design: Our unbranded 3D printed cup holder divider is specifically designed for Volkswagen MK 6 / Golf 6 models. Crafted with precision and simplicity in mind, it seamlessly fits into your car console to keep your drinks…
Introducing a custom-designed 3D printable HDD caddy, model SM17A06246, precisely compatible with Lenovo ThinkSystem models ST250, ST550, SR550, SR650, and SR850. In my quest for an additional HDD caddy, I realized the scarcity of readily…
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
Update 6/17/2024 : Added a couple options for rounding spiral edges & gap width. Also changed Helix to draw for length of hose wrap & changed spline points to 20 so they would be evenly divisible by 4 because I wanted the vertices to line…
This is a parameterized sponge holder that hangs on the center separator of your sink and holds a sponge to left. If you need to the right or double I also produced those: Double Sponge Holder Right Sponge Holder It's parameterized so I…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words not printed yet Category: Mechanical Toys
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
M3 Ball Joint Tie Rods 35mm to 150mm Printed in place. ball breaks free and can turn in either direction. Screw goes in the recessed end. Use nut as a spacer.
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words not printed yet Category: Mechanical Toys
I stumbled about that Whale Tealight Holder, and found that to be ideal for a planter pot if the potpart would be a tad bigger. So i edited this in Tinkercad, and thats what came out of this! Print instructions Category: Containers Print…
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
The air intake at the bottom of the unit is unobstructed. There is a cut out for connecting the power supply plug. You can route the cables to either side, or underneath the shelf. The buttons under the unit are accessible. The unit locks…
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
I downloaded this print...https://www.thingiverse.com/thing:2657972 and was blown away by how accurately it fit my Linksys Velop, but quickly realized that it was going to fail if I used the small holes provided…so I beefed it up a little.
Chain links of varous widths, the smallest size should be easily printed with an ender 3 with stock cooling
A remix of "sinkside sponge dish (vase mode)" by user Catdad Workshop with a more pronounced water fall added. All user credits Catdad Workshop. Your channel: https://www.printables.com/es/social/221908-catdad-workshop/about Your original…
I designed this cup holder to fit in the gap between the couch cushions. on my couch it even fits between the cushion and the arm rest.
📦 What's inside the set: The Pour: Stylized bottle with citrus fruit. Summer Spritz: Cocktail glass with a straw and a slice of orange/lemon. Cheers: Elegant hand holding a glass – the ultimate "party" symbol. 🖨 Print Settings…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words not printed yet Category: Mechanical Toys
Floating Donut for Drinks 🍹 | Youtube Video ✨ Introducing our Floating Donut for Drinks —a fun and practical accessory for your poolside relaxation! Easy Print & Assembly 🛠 Print require no support , and assembly is a breeze thanks to the…
Discover a highly dynamic, fully 3D-printable modular chain design! Whether you need a functional belt, a durable strap, a cosplay accessory, or just an awesome stress-relief fidget toy, this chain model is designed to adapt to a wide…
Print & acrylic draw.
The idea of belt printers is something that fascinated me and I created a few models, this is one of them! I made 4 versions whilst I tried to understand how belt printers actually print, and then gave this version to @NAK3DDesigns over…
[UPDATE] OpenSCAD 2019-05 has added native SVG support. I will continue to maintain this extension, but it's now a very low priority. https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/SVG_Import This InkScape extension (plugin) can be…
Here is a model of a large linked chain sized enough it can be worn as a necklace or used as a decoration. For printing, you will most likely need to add a brim for printing stability. A 3mm brim with 0.2 gap seemed to work fine. Also,…
Could not find a mount for the MX5300 Wifi 6 so I modeled up my own. I just added a corner mount for the mesh routers too. I did use supports on this mount for the long overhang. Print instructions I printed without supports and it works.…
Rawr Added a hole for keychain
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Here are some basic rear links for the SCX30 to increase your wheelbase by 5mm. These probably wont fit your stock bodies without modification obviously, but can work will on custom and fenderless rear bodies like the one shown (coming…
A set of stock length upper suspension links for the AX24. I wanted a set of color upper suspension links to match the Orange body of the AX24 itself. Printed in Prusa Orange PETG
