Little Green Army Men : intelligence/Kyrylo Budanov
Little Green Army Men : intelligence /chief of staff : Kyrylo Budanov Holding a full deck of cards and a cup of green tea.
- Downloads
- 78
- Likes
- 14
- Rating
- 5
125 models
Little Green Army Men : intelligence /chief of staff : Kyrylo Budanov Holding a full deck of cards and a cup of green tea.
I could not find a battery cover, so I created one myself. I don’t want unprotected batteries in my bag! So here it is: the DJI Flip Intelligent Battery cover. Fits nicely into place, locked using the battery-locks. As a bonus you can use…
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
You can never have enough synths, so I made this mount for my Korg Monotron Delay which attaches to the handle on my Intellijel case. No supports needed. Go ahead and edit it and attach your own gear!
I currently do not own any 1U modules but I would like to get the most out of my Intellijel 4U Palette case so I created the 3U to 1U Adapter for Intellijel. This adapter converts regular 3U eurorack modules to Intellijel’s 1U module spec…
An anatomical human heart generated by artificial intelligence.
Case for smart extension cable with Shelly Mini for Home Automation (e.g. Shelly or Home Assistant). Fitting for both, Shelly 1PM Mini Gen3 (switch and meter) and Shelly PM Mini Gen3 (power meter only). Depending on the screws (head type)…
Educational tool for emotional intelligence. You can move the pointing part to best represent your feeling of the day. You can use more color for the emojis or paint them for more fun ! You can insert magnet (12,2mm) to fix the board on…
I created this Gnome using AI (artificial Intelligence) tools I found online - for free. This does require supports and was printed at a .2 profile. I used Gyroid supports with a 5% infill. The 3MF file is for a Silk PLA print profile.…
This is used to remove or install the Pentair IntelliChlor chlorine generator. There was nothing available and I had overtightened the previous collar using my oil filter pliers. Perfict fit and allows for proper tork without scuffing up…
Introducing the Easel - a printable stand for your Intellijel palette case (62 or 104HP). My first “real” eurorack case was a 104HP Intellijel palette. There were a few stands available, but after just dropping $$$ on the case and some…
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
An Ikea Skadis mount for the Ryobi One+ IntelliPort Battery Charger (RC18115)
Another funny wallsign about Modesty, or the lack of it!! Both raised text and flush text versions, “Once you get past my charm, good looks, intelligence ...”, multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white…
pib.rocks pib – printable intelligent bot pib stands for printable intelligent bot and is a (smart) humanoid robot that you can build yourself using 3D printing. pib is open and offers a unique chance to all takers to help shape our…
Threaded insert version can be printed without any supports, the clip version does need supports. I would strongly advice using the threaded insert variant, as it's much sturdier (though get some washers to alleviate the stress on the…
another small model I made, which will likely need to be printed in Resin in order to work well (lots of tiny details that will likely get lost with FDM, or not fit properly)
Support for Ryobi Charger Intelliport 18V
Multiboard holder for the Ryobi USB 18V Fast Charger. Premade holes for the mounting screws are 63mm apart - see back of charger. This holder uses Multiconnect connectors. You will need 2 M4 8-10mm machine screws - they self tap into the…
I wanted to have a little fun with the latest contest for Office Accessories. I wanted something that was intuitive, functional, versatile, and aesthetically pleasing… And most of all, I wanted something that people would recognize…
This is a blank tile for Eurorack, 1U 20Hp
I created this model with the help of Text to Image to STL software. I then tweaked the model a bit to reduce hanging fragments and extreme overhangs. It will still require supports, though. This was generated and printed as an example of…
This model is intended only as a basis for subsequent tuning.
Case for DC 6-30V 140W Multi Protocol Desktop Intelligent Fast Charging Module
This is just a little rack for storing and displaying your Intellivision games. I printed the Atari Rack model I got from here on Printables for my 2600 and 7800 games and wanted to keep going with the game organization so I designed this…
Several people in the comments of the original model requested an STL file instead of only the gcode. No changes were made to the original model design.
I found an iPhone app that uses text prompts to create 3D assets. The app also creates a mesh of your texted idea and downloads the .STL file for you. It also supports Blender, .OBJ and a few other files. While this process is pretty new…
Pièce créé pour la multiprise AOFO Multiprise intelligente WiFi https://www.amazon.fr/dp/B07SKTBC47?psc=1&ref=ppx_yo2ov_dt_b_product_details J'ai imprimé la pièce en PETG en 0.3m Le STL représente X1 Attache Le Gcode est près à imprimer…
An OpenScad script for producing a cartridge shell for Intellivision, STL file is included. Use the default settings for generating a working shell. All parameters of the design may be modified using sliders and buttons. However, any…
Who says professors have to be boring? 📚 Meet Professor Temptation , a charming, confident, and playful character who brings a little personality to your 3D printed figure collection. With her wavy hair, elegant outfit, playful smile, and…
This thing allows one to combine a Make Noise 104HP skiff with an Intellijel 104HP/7U performance case without destructively modifying either case. Simply replace the Make Noise side panels with the ones included in this thing, then slide…
A front coupler for the DUPLO IntelliLok to use two Loks on one Train. Just use the original Screw to fit the coupler base. Print instructions Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PETG PETG Jet Black
This is a blank tile for Eurorack, 1U 2Hp
This is a blank tile for Eurorack, 1U 30Hp (Intellijel)
My old “24h surveillance” sign was getting a bit faded so I decided to make a more interesting replacement sign than what you can find for sale. After all, 3D printing is all about practical designs combined with unique creativity. I hope…
Multiboard holder for the Ryobi One+ IntelliPort Lithium+ 18v Wall Charge This holder uses Multiconnect connectors like the design this was remixed from Small pilot holes for screws for the ryobi mount to go into. Uses these connectors…
Hi i redesigned some of the original Lego Intelli Train actionblocks. At the moment i have redesigned the Refuel-, Trainhorn- and the direction change block. I know there is a Cargo-, Passenger-, and Stop actionblock. Im looking forward…
These are similar to the blocks used in intelligence tests. 2.5cm. Children are shown a pattern on paper and asked to replicate the pattern with the blocks Assembly To make two blocks, print two copies of the STL in different colors. I…
This is a blank tile for Eurorack, 1U 4Hp
Got a couple projects in the works for my intellijel palette case – this was the first. Dimensions are the same as the metal side-panels.
A plaque and pin of the U.N.I.T. emblem from Doctor Who. (UNified Intelligence Taskforce). I've included the colour change .gcode from Prusa Slicer.
Hund Intelligenz Spielzeug Das Spielzeug wird mit Hundetrockenfutter "geladen". Der Hund muss begreifen, dass er mit Pfote oder Nase die Taste drücken muss. Über ein Zahnrad-Getriebe wird das Magazin weiter gedreht, bis die nächste Kammer…
maintient du couvercle pour un intellitag qui a les pattes de fixation cassées
Expansion Cheeks for your Intellijel 4U palette (should work for 62 or 104 HP models). You'll need to print the cheeks desired, source 10x M4 screws of the correct length (80mm for 14HP, 50mm for 9HP), and either square nuts or threaded…
Download this awesome Vase to get 1000VBucks for free
Vase, sculpture, created by ia, print requires supports, a perfect example of turning words into real objects. Standard printer and slicer settings. So that the thing would be created without human intervention I printed it from PLA on…
For best results print vertically, with bottom facing the back of the build plate. Seam Position: Back Enable "Make overhangs printable." if you can. Works nicely with my Intellivision game storage shelf.
An Intellivision cartridge-styled shell for USB flash drives ( Sandisk Ultra Fit ). The location of USB ports on the Intellivision Sprint console, under the overhangs, makes accessing/removing very small USB flash drives a little awkward.…
My factory gasket went bad and started allowing powder into the bearing, causing the motor to stall. This part creates a nice, tight seal around the opening while still allowing the dropper to rotate without any tension. I trimmed up the…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A toy for cats to playfully get treats. I printed this on my X1-C. This is simple to Print without supports or Brim. I Printed it with 3 walls and 15% infill for enough strength but 10% should also do it , its your decision. For speed…
If you have upgraded a CR-10 mainboard, you may also want to upgrade the display to take advantage of the extra memory. I designed this mount for the intelligent display that can be found on Ender 3 V2s and S1s or sold as a kit from…
SHELF STAND How to install it: You need a drilling machine with an 8-9mm drill. U have to drill 3 holes at a distance of 130mm. (about 12mm deep for a snuggy fit.) Just Put the shelf on the Stand (maybe needs a few punches). It stands…
This is a replacement for the Intellichem Jelly Jar Pentair 754000340. These things are impossible to get since the freeze that ravaged Texas. I gave up waiting on the backorder so I made a replacement. Everything to spec and the o-ring…
This is a front panel for a simple Intellijel-style 1U switched multiple for eurorack synthesizers. As it is relatively small, even basic PLA should be strong enough for this print. 10 HP
You can size it up to the size you want. You can paint the letters to make it easier to read.
This is a 3Hp vent/blank tile for Eurorack
Print in PETG for best results.
May have to scale to get a good fit. You want a nice firm snap, but still be able to turn with some nice resistance. The factory one comes off pretty hard, you may need to use a box end wrench to carefully pry and pop it off.
Intelligent Filament Runout and Jam Detector Mk.2 I now have a Mk.3 version Clever Filament Runout Jam Detector does NOT return False Positives. Uses an Idler Wheel and an Encoder Wheel with an Optical End Stop This is better than my Dual…
An adapter module to bring any eurorack module USB connections to the front of your case. Designed a 3U version for a mini USB extension cable and a 2U version for a mini to micro USB adapter from Amazon, links below. Modules are…
This is a front panel for a simple 3-jack Intellijel-style 1U mult for eurorack synthesizers. As it is relatively small, even basic PLA should be strong enough for this print. 8 HP
An Intellijel 1U Eurorack panel with 6 holes for standard 3.5mm eurorack synthesizer jacks. Can be used for a multiple, passive mixer, OR gate etc. As it is relatively small, even basic PLA should be strong enough for this print. 14 HP
Update 2022-05-04: Since, the old version was bit flimsy I made a thicker version. So far, they perform much better than the older version. See the download are for the newer versions (labeled as “thicc ed.”)…
This is a cable holder that will rest on the handle of your performance case with part of it fitting into the gap of the handle. The insert piece is optional but provides a place to store knurlies, picks, and other odds-and-ends. If you…
printable holder for one NeoPixel LED for Intelligent RGB LED NeoPixel Garland IP68 WS2811 5V
This is a storage and display shelf for Intellivision games. It's about the same height and depth as a CD jewel case. There is an end cap and and a double sided “mid cap” that lets you extend the shelf as much as you like. If you plan to…
A very niche thing but I used them for years on my WMO
This holds my Intellicharger i2 charger along with it's power cord. I don't use magnets so there are no magnet holes in this model.
Intelligent Fixings Peanut Mini Jig Drill guide bush 5mm. You have to insert a drill bush DIN 179 5x8x16 B. You need this Drill Guide bush to be able to make miter Joints with the Peanuts Mini Jig.
I asked an AI (ChatGPT) to generate an artistic object. after some prodding, it output two different objects and I combined them in Prusaslicer. I have no idea what it could be used for. other than an object of ‘art’. Maybe a start of a…
looks good with a color change best black and white in my opinion.
Funny Parametric Stencil with added Options The default message was the reason for me to add the scaling offsetting and condensing options on a per line base... There are obviously further improvements thinkable - for now thanks to the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Intelligent Filament Runout and Jam Detector Mk.3 Uses an encoder wheel and an optical end stop to signal filament runout or a filament jam
Pre-painted to be printed in 4 or 5 colors.
For replacing side buttons in Intellivision controllers. I created this as the hard uncompliant buttons of my INTV III were not much fun to use and sort of ruining the overall experience. These are not going to make you controller…
I made a small change to the rear latch from the original file: I lowered it by 1 mm and enlarged the hole by 1 mm.
A game display for games in double jewel cases (PS1), long jewel boxes (Sega Saturn), long boxes (PS1, 3DO) and boxes (Game Boy, GBA, NES, Atari, Intellivision, Genesis - NOT clamshell cases). This does not hold SNES or Nintendo 64 boxes.…
These blank panels feature oval mounting holes and have been verified for fit specifically on Sinusoda rails. To maintain a clean aesthetic, panels 2HP and larger utilize a two-hole diagonal mounting design (top-left and bottom-right).…
CI5 byla fiktivní britská tajná bezpečnostní složka, která řešila nebezpečné zločince, terorismus, špionáž a případy, na které běžná policie nestačila.
A faceplate panel for the Intellijel Ringmod 1U eurorack module. You'll have to adjust your printer settings to make the face diagram look better.
I made a cover for my Nitecore i2 Battery charger as I didn’t like the fact that the batteries were exposed and could easily be knocked out of place. The cover snaps in place and can easily be removed. I also made sure it was not fully…
Battery cover replacement for Intellitouch PT10 Tuner, not an exact contour match, but it will do the job effectively. Print flat face down with supports.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a small holder for the mausberry-circuits RockerSwitch RaspberryPi intelligent power switch see: http://mausberry-circuits.myshopify.com/collections/frontpage/products/shutdown-switch-with-rocker for use in the Adafruit Pimoroni…
A 3D pin of Microsoft Fabric Real-Time Intelligence's logo
This mugholder will automatically close its lid, once you put your coffeemug on it to prevent letting any kind of chips and other scraps fall into your brewery. It works with a counterweight to lift the lid again when you grab the mug…
made by fox bot
This 3D model is designed to fit in place of the intake filter on FV-10VE1 and FV-10VEC1 Panasonic Intelli-Balance ERVs. It serves as a basis for creating a reusable filter, provided you have a larger upfront filter installed before the…
The intellical wavelength calibration light source is designed to be attached to directly to a spectrometer for calibration purposes. If you want to use the contained Hg and Ne lamps standalone, this adapter is useful to limit to exposure…
Nitecore Intellicharger i4 Pegboard Mounted Holder remixed from Ahmad AlAmrey's model together with the Multiboard Pegboard Click Hook. Print with supports
a sign to give to your friends I will have a real photo as soon as I can get it printed
A wallmount to attach a Frient Intelligent Smoke Alarm. Screws are needed to fix it to the wall. To add the smoke alarm to the bracket, you can use the adhesivetape include in the box of the alarm.
#!/usr/bin/env python3 # PenColorizer.py - Adapted for Orca Slicer / Bambu Studio post-processing # Adds pen changing & offset drawing logic for multi-pen plotting on 3D printer import re import sys import os class PenColorizer: def init…
Print two - one for top and one for bottom. If you just want to attach it directly to a wall, use these attachment points . The hole spacing is at 25mm intervals. You will minimally need two of those mounted 100mm apart vertically. For…
This mount can be used to firmly mount the "intelligent night light" to any surface, e.g. cupboard shelves. These lights come with sticky magnets, but it's easy to bump into a light and make it fall down. This mount solves that problem by…
My old silver IJ faceplate for my Quadratt was not vibing with the all-black nature of the rest of my case, so I designed this. Three versions - blank (if you want to customize your own stuff), raised labels and embedded labels. With the…