70 models
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
Hello everyone. I present to you a new superhero figure. It's Invincible. The model is available without supports. You can support me and subscribe to my Instagram 😊 https://www.instagram.com/monster_prey/ You can download other FREE…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
Hello again! This is invincible's faceshell/mask for cosplay use. Remix from ( https://www.thingiverse.com/thing:4773521 ) If you have any questions or requests, you can comment on this THING. Enjoy:)
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Yellow PLA UltraPLA -White PLA Bambu Basic -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing…
Made in Blender, I separated the battery/radar thing from the back of the helmet so it can be printed separately in a lighter manner otherwise it will weigh down the backside and cause it to lean back. (Might do that anyways)
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
HMS Invincible Aircraft Carrier from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
Hi! This is a remix to a model, splitting it into two seperate parts. It's easier to print on smaller machines now (; Please Like and comment if you enjoy (: If you want to split it into objects , go into the objects tab, and click split…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! With season 3 episodes coming out now, I went ahead and created a figure of Mark himself! But I decided to leave this one…
Hey James, rushed this one a we bit, but I think it came out pretty good. Do check the sizing suits your needs and post some picks if you do take the challenge on ; ) Cheers Jace
Invincible ISS Vanguard Insert This insert is designed for the ISS Vanguard board game. Although the original game includes a decent insert, I wasn't entirely satisfied with it. First, it doesn't accommodate sleeved cards. Second, the…
I really wanted to make something from Invincible after I binged season 3 and saw that no one had really made and uploaded an accurate version. It's a mix of the two pieces of art (the second of which is in black and white because that's…
Invincible logo with separated letters. So this can be made without using an AMS system.
3D Print your own hulk today!!! Happy Printing! Please enable tree supports!
A head made for normal Dummy 13 figures which represents Mark Grayson AKA *title card* from the hit show *title card*
Some features: Vertical storage Supports premium sleeves (I use Arthur & Excalibur sleeves from Paladin; the width of the sleeves for the minicards must not exceed 48mm). Fast setup The markings in the slots of the deck holder indicate…
I've been watching a lot of Invincible so I figured I would try my hand at making an action figure. The pictures are printed with a .2 layer height with cura on an Ender 3 v2. If you have a stronger machine you can go as far in detail as…
Bring fictional character, ‘Invincible’ to life through the 3d printable action figure Dummy 13 with this head. I recommend using a Bambu printer, but any should work. It does work with AMS devices.
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from…
Printed from Ultra PLA and PLA by Noctuo and PLA F3D filaments -Black PLA UltraPLA -Blue PLA -Wood Ash PLA Spectrum -Red PLA -Perl Red PLA -White PLA Bambu Basic -Mocha PLA UltraPLA Printed on Bambu Lab P1S and AMS I recommend printing…
Keychains I made for Invincible and all his variants in the Invincible war. Most of these can be made without an mmu, but if you want 3 or more colors then you will have to use an mmu or paint i guess.
Make your lawn invincible with the Invincible Lawn Star! A proper whirligig, it spins in even the gentlest of breezes. It can sit atop a pole made from 1/2-inch PVC or you can hang it from a tree using the convenient hole in the top (use…
Invincible Iron Man Inspired Helmet Enjoy Category: 3D Printing
this is the invincible title card
Hemovorous the Invincible, the giant Varkid you can encounter on Borderlands 3 is now ready to hop off the screen and terrorize your desk or shelf! Don't print it to big or you might want to have some Vault Hunters at your side to help…
This is Mark Greyson from Invincible after/ during a battle. He is beat and has some scars while fighting. He is flying up from the base which is rebar and concrete bricks printed him at .08 for detail lower body and full body available…
Printed on Bambu P1S using Sunlu PETG filament
I decided to make a book mark for my invincible comic book. I made it in, none other than the invincible font itself.
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black tuquise 12 yellow 14 white 18
A coaster with the logo of the tv show invincible
Application Instructions: Print with PLA or TPU the color of your choice. Place the printed logo on your T-shirt in the desired position. Cover it with parchment paper (baking paper) or a heat-resistant sheet. Use an iron on a medium heat…
I would sometimes bump the charge marker on the homeworld, so I made the little tray to hold it in place, similar to the knight / hero boards. The card slides right in easily. Compatible with: Astro Knights Astro Knights Eternity…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 13 brown 14 white 24
Invincible The Card Game came with a pretty garbage insert that doesn't hold the cards well and can't fit the official sleeves, so I made a very simple one with almost the same dimensions as the one in Astro Knights and Astro Knights…
Invincible (show) Lithophanes
Created and shared in OnShape This is a replacement strainer (screen, filter, etc.) for an Invincible Marine 800 GPH Bilge pump with float switch . It probably also fits many other brands. There are two versions. One is just the strainer…
-Created by using the relief sculpture maker on makerworld -A higher infill can increase the print quality -If you set a single colour change at the height 2.80 mm the background is different colour to omniman so looks better
invincible fullmask mark
Just a cool scout woggle, print and wear
A simple model of the logo of the Coalition of Planets from the show and comic book series "Invincible"
This is a statue of invincible or Mark from “Invincible” is has two models one multicolor and one singlecolor.
mark I made a steak...
the artist is Ryan Ottley. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
This is a replica of Monster Girl's new belt from season 3 of the show "Invincible." SPOILERS. In the show Invincible 3x6, Robot/Rudy/Rex finished creating this belt for Monster Girl/Amanda. Amanda has the ability to transform herself…
Unleash the power of heroic storytelling with this stunning 3D printable STL figurine that captures raw strength and determination in every detail. This dynamic statue showcases incredible muscular definition and an action-packed pose…
Use this to show off your invincible compendium books with awesomeness, I will post a real picture of usage with the book and this, I made this in blender for my first ever make on printables
The Invincible Ring is a sleek, detailed design inspired by Invincible's iconic look, translating the character's recognizable aesthetic into a functional 3D-printable ring. Designed with accessibility and customization in mind, the ring…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
the artist is Ryan Ottley. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
This is a statue of invincible or Mark from “Invincible” is has two models one multicolor and one singlecolor.
Application Instructions: Print with PLA or TPU the color of your choice. Place the printed logo on your T-shirt in the desired position. Cover it with parchment paper (baking paper) or a heat-resistant sheet. Use an iron on a medium heat…
Use this to show off your invincible compendium books with awesomeness, I will post a real picture of usage with the book and this, I made this in blender for my first ever make on printables
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
(Please note: The pre-supported resin versions in this release was from back when I was still figuring things out, so things are messy and confusing, and I unfortunately can't provide any support for them.) This one comes in two versions:…
