Search results: iskar

Sort order

Counting matching models…

P
Printablesfoxontherun

Skadis / Skådis - Fiskars scissor holder

A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant

Downloads
1,292
Likes
175
Rating
4.85
P
PrintablesRob Latour

Wall mount for Fiskars 23" PowerGear Hedge Shears

This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…

Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
6
Rating
0
P
Printablesn00by

Fiskars Plus Bypass P521 pruner wall bracket

Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…

Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
11
Rating
5
P
PrintablesPetr Bojar

FISKARS Essential Roll-Sharp

Replacement cover for Fiskars sharpener. For better strength of the locking latches, it is better to print the model on its side. Supports: yes It is definitely better to use PET-G, due to its flexibility.

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
5
Rating
0
P
PrintablesCNC Kitchen

Wall Mount for Fiskars Garden Tools

Printed this in Prusament PCBlend so that it doesn't deform in my garden shed in summer. PETG should also be working, though.

Downloads
539
Likes
192
Rating
5
P
PrintablesJAKUB VIKTORA

Fiskars axe holder

Holders for axe and Fiskars Xsharp™ knife sharpener. Tested with axe X10 and X17.

Downloads
431
Likes
87
Rating
5
P
PrintablesSebastian

Fiskars X-Series Waterwheel XL Spanner für Feder (mechanical spring tensioner)

Wenn sich nach einiger Zeit der automatische Auslösemechanismus nicht mehr funktioniert, muss die Feder im Inneren nachgespannt werden (Vorsicht). Das hier bereitgestellte Werkzeug kann mit einem großen Schraubenzieher genutzt werden, um…

Downloads
409
Likes
4
Rating
0
P

Fiskars snow shovel hook

This hook will allow you to put your shovel or pitch-fork on a wall safely till next time you'll need it. I made it, so I could hang the snow shovel till next winter. The hook wide enough (90mm), so the shovel will stay in it's designated…

Downloads
375
Likes
63
Rating
5
P
Printablesjstjern

Scissors handles fiskars

Taking inspiration from the iconic Fiskars scissors with orange handles, I did a Fusion360 cad model as I broke the handles by accidentally dropping my scissors on the floor. It is not like the original, but brings the scissors back into…

Downloads
322
Likes
16
Rating
0
P
Printablessamede.de_

Eiskartzer

Sag Tschüss zu den Eisschichten auf den Scheiben.

Downloads
260
Likes
38
Rating
5
P
PrintablesMaverick0197

Fiskars X7 Sheath

Wearable sheath for the Fiskars X7 hatchet. Can be mounted to Tek-Lok style belt clips. Mounts facing forward on the left, mirror parts for right. Two mounting styles: fixed or pivot. Pivot can spin around on the belt clip, fixed cannot.…

Downloads
231
Likes
27
Rating
0
P
PrintablesTbah

Fiskars hobby knife holder for #gridfinity

I was looking for a Fiskars hobby knife holder for #gridfinity but couldn't find one. So I remixed kaspertulstrup's x-acto knife holder to fit the bigger Fiskars version. Gridfinity is the ultimate organizer for your whole workshop! Zack…

Downloads
224
Likes
40
Rating
5
P
Printablesrolleroll

Fiskars L99 Handgriff / handle

Handgriff für eine Astschere L99 Fiskars, Ersatzteil für den Handgriff Handle for a L99 Fiskars loppers, spare part for the handle

Downloads
189
Likes
6
Rating
5

Fiskars HS72 central gear replacement part

This is the central cog for Fiskars hedge scissors HS72. It broke and I remodeled it for printing and thought it would b

Downloads
183
Likes
8
Rating
5
P
PrintablesDaniel Charvát

Fiskars Rake

I recommend to print it from PETG.

Downloads
169
Likes
18
Rating
5
P
Printablesfoxontherun

Skadis / Skådis - Fiskars Craft Knife holder

A simple craft knife holder for the Skådis / Skadis peg board. It protects the blade so does not make room for the cap. I printed it with 3 perimeters and 15% Lightning infill and it seems super sturdy. Supports are needed for the pegs.

Downloads
160
Likes
19
Rating
4.5
P
PrintablesMr. T

Fiskars shovel holder for IKEA'S IVAR

Height of the holder matches height of the Ivar side plank: 40 mm. Use 25 mm screws, if the shelf is right behind the plank, screw could be longer. 20% infill, 3 perimeters, PETG recommended, print in place, no supports needed.

Downloads
159
Likes
16
Rating
0
P

Fiskars No. 5 Micro-Tip Scissors Sheath

This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎

Downloads
159
Likes
13
Rating
5
P
Printablesn.leinad

Fiskars X13 Axe - Cargo Cap

The Fiskars X-series ultra lite axes are great for hiking and their smallest X13 model would make a perfect emergency axe if the empty handle could be used for storage, this cap does just that! It is made in two versions, one hollow with…

Downloads
145
Likes
80
Rating
5
P
Printablescjs

Gridfinity deburring and Fiskars xacto holder

I wanted a holder to put my two most used cutting tools in one place. This was designed to fit the “AFA Tooling” deburring tool ( Amazon link ) and Fiskars clone of xacto knife ( Amazon link ). I find the Fiskars version more comfortable…

Downloads
139
Likes
27
Rating
4.67
P
PrintablesRanppa

Hobby Knife Case (Fiskars)

I tried to find a nice case that would nicely (and safely) hold a hobby knife, because the original cap just seemed a bit flimsy. Couldn't find one, so I made my own! Also as a bonus, the case holds a spare blade box. The knife is about…

Downloads
134
Likes
24
Rating
5
P
PrintablesDJ_Designs

Fiskars X10 axe hanger

to easily have it hang on the wall

Downloads
129
Likes
14
Rating
5
P
PrintablesKraloulk

Fiskars Hobby Knife Cap

I broke my hobby knife cap so, I made a new one. It's not perfect but it's a suitable cap for the fiskars hobby knife. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: .12mm Infill: 50%…

Downloads
127
Likes
15
Rating
5
P
Printablesn00by

Fiskars QuickFit wall holder

Adjusted inner diameter for QuickFit extensions. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30% Filament: Does not matter PLA, PET-G Category: Household Supplies

Downloads
127
Likes
17
Rating
4.5
P
PrintablesDyrt

Fiskars Scissor Holder

Nothing too fancy, held on with double sided tape on the side of my desk for quick access. The part number on my snips are AA0620.

Downloads
126
Likes
22
Rating
5
P
PrintablesArek Suchy

Attachment to Fiskars Quikfit handle

Handle for Fiskars replaceable tools. I printed from ASA in two parts (A and B) and glued. SW x2 nozzle 0.4 layer 0.2. You can print with Petg, it should also withstand. A slight cut can be needed on the handle. Fastening to the nit.

Downloads
123
Likes
15
Rating
5
P
PrintablesDJ_Designs

Fiskars Tool snap on clamp

https://youtube.com/shorts/XhEza27AbTo?feature=share print the model standing up! some of those tools I know it fits: Hedge shear HS52/53/72 Loppers L32/70/77/74/31/78 tell me if you know more models! added a clamp that fits the L5532

Downloads
116
Likes
20
Rating
4
P
PrintablesCaptain Hammer

Fiskars quikfit adapter for DIY tools

Printed with Prusament ASA, 5 perimeters (fully filled walls), adaptive layer height. Wall thickness is 3.5 mm. Bottom plate geometry is shown in a picture. Tested with telescopic handle L.

Downloads
111
Likes
11
Rating
5
P
PrintablesJirka Ottmar

FISKARS - tool holder

Holder for fiskars tool attachment

Downloads
109
Likes
10
Rating
4.67
P
Printables3DJourney

Hooks to hold Fiskars hand gardening tools

A hook board that is designed to hold a set of Fiskars hand garden tools, the hooks are shaped specifically for the design of hole in the handle that this Fiskars set has. Print Settings Setting Walls 2+ (I used 6) Layer Height 0.2mm…

Downloads
108
Likes
36
Rating
0
P
PrintablesNilaik

Wall Mount for Fiskars Gardening Tools

Mount for holding three small gardening tools where the hole for hanging the tool is greater than 1 cm in diameter.

Downloads
105
Likes
21
Rating
0
P
PrintablesBubutech

Fiskars X7 holder

82% z pôvodneho vykresu

Downloads
103
Likes
9
Rating
5
P
Printableservys

Fiskars držák sekery

Pro modely X 17,19,25 ...

Downloads
102
Likes
17
Rating
5
P
PrintablesDJ_Designs

Fiskars clamp weed puller

to clamp it on the wall

Downloads
101
Likes
12
Rating
5
P
PrintablesCorvus

Garden Water Sprayer Holder (adjustable) - Gardena, Fiskars or similar - Irrigation

Update --------- ___ easy to print ___ Garden hose water sprayer holder for irrigation. A tripod stand with adjustable angle or alternatively a simple bipod stand. Simply clamp the hose coupling into the hose holder to irrigate your…

Downloads
100
Likes
29
Rating
4
P
PrintablesHekeke

Fiskars detail knife magnetic tip protector

I recently bought Fiskars detail knife , but the protector it came with can fell off and wear down with time. I decided to use my leftover magnets from previous project. The magnets hold the case closed and holds the tip in place as well.…

Downloads
98
Likes
50
Rating
3.67
P
Printablesrandy_s

Fiskars Easy Pour Watering Can Replacement Sprinkler Cap.

Thanks to TheMADEngineer for his design, which looks like it solves a similar problem. I was not happy with my original design however so used the sprinkler pattern from his model, scaled to fit. The square hole to one side is because the…

Downloads
98
Likes
9
Rating
5
P
PrintablesSodawasser

DIN rail relay card mount/holder (Hutschienen Relaiskartenhalter)

Inspired by: https://www.thingiverse.com/thing:5359910

Downloads
97
Likes
14
Rating
0
P
PrintablesJulius3E8

Chalice of Iskar from Shadoan laser disc game

An arcade sequel to Thayer's Quest (which is what a few Dragon's Lair cabinets were converted to back in the 80's), Kingdom II: Shadoan had a few minor items to collect throughout the often confusing and sometimes incoherent journey that…

Downloads
96
Likes
13
Rating
4
P
PrintablesVertricus

Fiskars fibercomp tools wall hook XA3, X7

Printed in PETG/0.2/20% infill. I printed mine laying on back with supports, but should be working with bottom on the plate.

Downloads
94
Likes
10
Rating
0
P
Printablesscott-scott

Fiskars thread snips cover

This isn't the prettiest model, but it is functional enough to solve my issue. I didn't like that the Fiskars thread snips I use for sewing lay in an always open state, apparently newer models now have a closure mechanism. I designed this…

Downloads
83
Likes
8
Rating
5
P
PrintablesGrendziol

Fiskars QuikFit hanger

Fiskars QuikFit hanger

Downloads
81
Likes
9
Rating
5
P
PrintablesMichaelP

Sewing Kit Box with Living Hinge and Magnetic Closure for Fiskar's Sewing Kit

This case stores the contents of a Fiskar's sewing kit (up to 12 spools) and features a magnetic closure. The pin cushion is created by folding a paper towel or square of microfiber cloth and tucking it into the rear slot. You will need 5…

Downloads
80
Likes
20
Rating
0
P
PrintablesBlackcrow

Holder for Fiskars Pruning Shears (P121)

For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…

Downloads
75
Likes
16
Rating
0
P
PrintablesAkinayr

Fiskars Mirco-Tip Snips / Scissors Replacement Lock

I have several of these snips and they work great… except the lock wears out overtime and they keep popping open. A quick run at a replacement part and here it is. I made it a bit snug and it works well. One end is flat so that it can…

Downloads
72
Likes
4
Rating
0
P
Printablesnoise

Fiskars Craft Knife Cap

The cap that came with my knife allowed the tip to extend past the top of the cap, usually right into your finger. I created this replacement and included a reminder that the #11 hobby knife only allows us to use it with the required…

Downloads
71
Likes
10
Rating
5
P
PrintablesPavel Brych

Replacement clasp for Fiskars bypass pruner (náhradní zámek pro zahradní nůžky Fiskars)

Replacement clasp for Fiskars bypass pruner. Printed from PET-G, 0.15 mm layer height. If oriented as shown on attached picture, supports are needed only for bottom bridge. PLA should also work, probably with better overhang performance,…

Downloads
70
Likes
5
Rating
5
P
PrintablesPolster

Scissor holder for Ikea Skadis- 20mm for FISKARS scissor

The Fiskars Hardware (21cm) scissors are a bit wider and did not fit well in the original holder. I made the opening 20mm to make the bigger scissor fit well. Print Settings Printer Brand: Creality Printer: Ender-6 **Supports:** Yes…

Downloads
68
Likes
5
Rating
5
P
Printablesvespaholic

Fiskars Softouch Scissors Replacement Retaining Clip

I have had these for 20 or so years so and the clip broke 4-5 years ago so I finally got around to replacing it. This is a modified from the remix to fit this exact model not sure if it would work on other models. I of course tossed the…

Downloads
65
Likes
5
Rating
0
P
PrintablesH3dSprint

Hand grip for Fiskars branch saw of tree pruner UPX86

The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed. The hand grip works also fine…

Downloads
64
Likes
18
Rating
0
P
Printablesvidision

Parts for Fiskars Micro Tip Pruning Snips

Simple prints. I cut (with a small chisel) a slight notch on both sides of the original snips to allow the new clip to slide into place. The clip is direction both left-to-right and top-to-bottom.

Downloads
63
Likes
14
Rating
0
P
PrintablesPtarmigan

Pull-string reel for the Fiskars Extendable Pole Saw and Pruner

Fiskars manufactures a line of tree pruning tools with extendable reach and a pull string operated pruner. They are popular and effective pruners and a good value. However, the pull string has to be long enough to function at full…

Downloads
61
Likes
16
Rating
0
P
PrintablesPetr Janatka

Fiskars cutting height adjustment knob M8

Just use an M8 x 40mm hex head screw and screw in.

Downloads
61
Likes
6
Rating
0
P
Printableslcharsh

Gridfinity Fiskars Circle cutter holder

based on Zack Freedman’s awesome Gridfinity system. I made this to hold my Fiskars circle cutter. I am new to designing so used his base model and added to it in ShapR 3D. The step file is included if you have a different model.

Downloads
60
Likes
18
Rating
0
P
Printablesrayperkins

Oculus Iskarna Stand

This print turns the Ikea Iskarna LED light into a VR headset stand, with a spot for the controllers. It mounts using an existing screw, just remove the screw, set the lamp on the print and screw it back in.

Downloads
59
Likes
11
Rating
5
P
Printablesmartin.demling

Sheath for Fiskars needlework scissors

Sheath for Fiskars needlework scissors. Fits the 13cm size. The “fish tail” shape helps pulling the scissors out of the sheath.

Downloads
59
Likes
11
Rating
5
P
Printablespwyckoff

Fiskar Easy Action Micro-Tip Titanium Scissor Sheath

A tight friction fit to help keep you and your projects from getting poked by these scissors.

Downloads
56
Likes
8
Rating
5
P
PrintablesBubutech

Fiskars X17 holder

109% pôvodneho suboru

Downloads
55
Likes
8
Rating
0
P
Printablesn00by

Fiskars scissors Solid Micro-Tip wall bracket

Fiskars Micro-Tip wall bracket to screw on the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA black Notes: There is no specific need. You…

Downloads
52
Likes
6
Rating
5
P
PrintablesGrendziol

FISKARS - garden tool hanger

FISKARS tool hanger for wall mounting

Downloads
52
Likes
13
Rating
0
P

Fiskars Ice Scrapper blade

My Fiskars Ice Scrapper blade broke and since I really like this thing, I decided to fix it. I printed it from PLA so I need to get it out of my car for summer but other than that it works just fine. Some support is needed for this print…

Downloads
51
Likes
16
Rating
5
P
PrintablesBrendan Quigley

Fiskars Scissors Clip

A replacement Clip for Fiskars Scissors.

Downloads
50
Likes
5
Rating
0
P
PrintablesWoodenDavid

Replacement clasp for Fiskars RazorEdge Micro-Tip Shears

Replacement clip (the white clip in the pictures) for an older model Fiskars RazorEdge Micro-Tip Easy Action Shears. It's a customizer so if it doesn't fit yours you can adjust it. V2: Version 2. – Version one lost its grip over time, so…

Downloads
49
Likes
5
Rating
0
P
Printablesiop22

Fiskars Scissors Handle

Handle to replace the thumb side of a pair of orange handled Fiskars scissors I broke. Uses the old screw. Supports are required. Added OpenSCAD version with rounded edges. Re-rendering takes a rather long time due to complex minkowski…

Downloads
48
Likes
7
Rating
0
P
PrintablesBubutech

Holder for Fiskars P961

typ 1 perimeter 3 infill 15% typ2 perimeter 2 infill 15% PETG,PLA,ABS

Downloads
48
Likes
12
Rating
5
P
Printablesn9dmt

Fiskars Multipurpose Snips Pegboard Holder

A pegboard holder for Fiskars multipurpose snips

Downloads
48
Likes
8
Rating
5
P
PrintablesMichaelZ

Gridfinity Inlay for Fiskars Cutter Knife

A Fiskars utility knife inlay for Gridfinity 4x2 bins.

Downloads
48
Likes
7
Rating
0
P
PrintablesBrothy111

FISKARS tool holder

TPU tool holder 100% scale fits with axe 90% scale fits with other tools

Downloads
46
Likes
13
Rating
0
P
Printableshli

Fiskars PX92 wall holder

Wall holder for Fiskars PX92 Pruning Shears. Printed in PETG, 0.2mm, no supports.

Downloads
44
Likes
4
Rating
5
P
PrintablesMartin_J.

Fiskars Quikfit broken lock - no glue repair

Fiskars Quikfit broken lock - no glue repair / náhrada zlomeného zámku Quikfit bez lepení - print in PETG or any a little bid flexible material / tisknout v PETG (3 perimeters, no infill) - clean the hole from any left broken edges with…

Downloads
43
Likes
10
Rating
5
P
PrintablesGoran2410

Iskarna riser

Riser is made to fit Iskarna lamp base to acomodate my Deadpool mask.

Downloads
42
Likes
2
Rating
0
P
PrintablesLex

Чехол топора fiskars x21

Чехол топора fiskars x21

Downloads
41
Likes
6
Rating
0
P
Printablesray of sunshine

Pull Cord Management for Fiskars PowerLever Pruner

This is for the Fiskars 14 ft PowerLever Tree Pruner (1-1/8 in. cut capacity). It likely works with the shorter and longer models as well. It is a great tool, but there is not a built-in way to manage the pull rope for the pruner to keep…

Downloads
40
Likes
3
Rating
5
P
Printables3D Alkohol

Držák zahradní nůžky fiskars P26

Držák zahradní nůžky fiskars P26 POKUD SE MODEL LÍBÍ DEJTE PROSÍM LIKE A STAHUJTE DĚKUJI

Downloads
40
Likes
2
Rating
0
P
PrintablesMike

Replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips

This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable

Downloads
40
Likes
2
Rating
0
P
Printablesshiona

HSW Fiskars scissors holder

Uses the m3 insert from the original honeycomb wall storage system. https://www.printables.com/model/152592-honeycomb-s

Downloads
40
Likes
4
Rating
0
P
Printablesrampersandon

Fiskars Hobby Knife/Exacto Wall Mounted Holder With Medium Command Strip

I wanted a place to hold my Fiskars Hobby Knife because I use it so frequently. I can't currently drill anything into the walls where I'm staying and so I haven't set up a Honeycomb Storage Wall or an IKEA Skadis or pegboard or anything.…

Downloads
39
Likes
5
Rating
0
P
Printablespavel.sima06

Fiskars garden scissors clip

Printer: Ender 3v2 Print settings: Filament-PLA Infill-40% Layer height-0.12

Downloads
38
Likes
4
Rating
5
P
Printablesbinaryhellstorm

Fiskars Gridfinity

4x1 Gridfinity bin for Fiskars 45mm rotary cutter.

Downloads
37
Likes
12
Rating
0
P
PrintablesDavid Šedivý

Drzak SUNLU S2 na tiskarnu Prusa MK3S / SUNLU S2 holder for printer Prusa MK3S

Nechtělo se mi vrtat do zdi, tak jsem si držák upravil na rám Prusa tiskárny.

Downloads
37
Likes
5
Rating
0
P
PrintablesCico

Fiskars knife stand

Fiskars knife stand Designed for Fiskars Functional Form 1057558. Print : 2x side 1/2 (brim for better adhesion recommended) 2x spacers 1x logo fiskars Glue it together with super glue. Print Settings Printer Brand: Creality Printer:…

Downloads
37
Likes
6
Rating
0
P
PrintablesTodward

Fiskars Easy Pour/ Easy Can Sprinkler Replacement Cap

I like my Fiskars lightweight Easy Can Sprinkler. The original sprinkler cap has destroyed by UV-light over years. At first I was searching for already constructed models of the cap. I found only one STL on printables. But this was…

Downloads
37
Likes
5
Rating
0
P
PrintablesTomaszGlogowski

Blockade for Fiskars scissors for trimming plants

Printed with X1E, filament ASA 3DROSA. The model fits into the scissors by pressing.

Downloads
37
Likes
3
Rating
0
P
Printablesrknt

Fiskars Scissors Holder

OnShape model insert up to two 25mm x 8mm magnets use 4-4.5mm countersunk screws to mount

Downloads
35
Likes
5
Rating
5
P
PrintablesGrzegorz Z.

Fiskars L71 replacement jaw

I've broken my cutting thingy while trying to destroy a big tree root. So here's the replacement part :) Testing: PLA → enough to cut thin “yearly growth” PETG → enough to cut like 10mm-12mm diameter branches ABS → unknown. PA+CF → good…

Downloads
33
Likes
21
Rating
0
P
Printablesgijoe4500

Fiskars tree pruner storage hooks

This is for horizontal storage of the Fiskars extending tree pruner / polesaw. I make it to hang mine saw up near the garage ceiling out of the way, since it gets limited use throughout the year. Mine is printed in PETG with 0.20mm layer…

Downloads
32
Likes
2
Rating
0
P
Printablesweberyap

Fiskars Rotary Cutter Guide

With my hands shaking, I was finally able to cut a long, straight line.

Downloads
32
Likes
9
Rating
0
P
Printablesfouinux

Grip for Fiskars precision knife.

Repalcement grip for Fiskars precision knife. Better in flexible fillament like TPU.

Downloads
31
Likes
4
Rating
5
P
PrintablesTomas Mrkous

FiskarsX7 mount jeep Wrangler

FiskarsX7 mount jeep Wrangler

Downloads
30
Likes
8
Rating
0
P
Printableskyaong

Fiskars paper creasing blade

i modelled the cutter blade from my fiskars paper trimmer to make one that can only crease. it slots in the same way as the original blades. it seems like all fiskars blade type paper trimmers use the same design, so it should fit on…

Downloads
30
Likes
5
Rating
0
P
PrintablesMartin Masek

Fiskars P921 locker

A “copy” of a broken original Fiskars part. Could have been made better but it works.

Downloads
30
Likes
5
Rating
0
P
Printablestmorris9

Fiskars 5" scissor mount

Got this small scissors for my bathroom and wanted to make a place to hold them so they don't end up all over the place and getting lost. The scissors I got from Amazon are "Fiskars 5 Inch Non-stick Titanium Softgrip Detail Scissors" and…

Downloads
30
Likes
4
Rating
0
P
PrintablesJswinfo

Fiskars Scissor Lock

Print on bottom face with a brim to avoid supports. I used orange ABS and a .15mm layer height to match original. Part will need to bend to snap into place on the scissors, it feels like you are going to break it during install but it…

Downloads
29
Likes
3
Rating
0
P
PrintablesSatillaTech

Gridfinity Fiskars Xacto

1x4 bin for an Xacto Knife. Remixed from a 2x4 that included a spot for a deburring tool.

Downloads
29
Likes
3
Rating
0
P
PrintablesJosh Edlin

Fiskars Power-Lever Pole Saw Rope Wrap

This is a snap on piece to wrap the cordage around for your Fiskars pole saw. I’d print it in PETG since it has a little more give when snapping it around the handle. There is some hardware required for assembly: 8x M5x16 bolts 8x M5x5.8…

Downloads
29
Likes
4
Rating
0
P
PrintablesAlexsim14

Small Fiskars knife cover

A knife cover for the blade of the small Fiskars knife. It's a bit narrower than the actual blade to have a tight fit. Printed in PLA: 2 shells 3 bottom and top layers 0,2 mm layer height infill doesn't matter brim plate adhesion was…

Downloads
28
Likes
1
Rating
0
P
PrintablesStillpointx

Scoring Tool for Fiskars SureCut Paper Trimmer

This custom-designed 3D printed scoring tool is a perfect fit for the Fiskars SureCut paper trimmer, adding extra functionality for crafters, card makers, and scrapbookers. The tool slides smoothly into the trimmer’s cutting track,…

Downloads
28
Likes
5
Rating
0
P
PrintablesGRG1980

Fiskars Knives Block Extension (Functional Form)

Helo, when you buy your knives set you are limited to 5 pieces. Like in my case i bought more knives separately, but had no place to put them. Block is printed 0,15mm in Antracite PLA from Fiberology, I am begginer so did not wanted to…

Downloads
27
Likes
5
Rating
0
P
PrintablesBob B

Fiskars Micro-Tip Protection Sheath

My wife is heavily into various forms of crafts. As such, she uses many different cutting tools many which are different size scissors. The scissors that this cover was designed for are Fiskars Micro-tip. These scissors are extremely…

Downloads
26
Likes
2
Rating
0
P
PrintablesRobware

Fiskars Splitting Axe Wall Mount

Fiskars Splitting Axe Wall Mount. Makes use of the small protuberance in the carry handle to keep the axe in place.

Downloads
26
Likes
4
Rating
0