53 models
I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
Needed more grip on my ARs. This version was made for rifles that had issues due to the gas block location. If you need your grip in the perfect location, but due to the gas block, you could not put it there and had to compromise, this…
you will need to shorten ptfe from extruder to hubs by 9mm this prevents the jamming of lane 4 by adding length to allow internal geometry to better direct the filament and keep it from hitting the wall where the bearing for the filament…
Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…
print with supports
I Have Issues Warning Keychain
I made this tissue box holder for my 200mm tissues. There are 3 different designs for the box. Print with respective lid. It can be scaled as desired also below is the link to onshape model to make your own changes.…
Repair of the Mechanical Orrery turntable by https://www.printables.com/@M4NU
Do you have many packs of tissues around the house? Do you want them all in order and close at hand? Print a gravity holder! Print instructions PLA layer: 0.2 infill: 10% You can use duble sided tape or "4" 3,5x20 screw for mount it
Hi. The diamter from the holder is 35mm. The width is 125mm.
A durable tissue box cover that prints efficiently. Couldn't find any models of a tissue box cover that would fit our local (EU) size boxes. The ones I could rescale to fit, would result in a waste of printing time and material. Even…
print with supports
I also included the FreeCAD source files , so you can edit them on your own without any proprietary software. Please share the models if you make your own. If you are in the EU and want to support my work, you can support me by buying…
known issues fixed
Details: https://www.reddit.com/r/FixMyPrint/comments/s2gg9p/anycubic_i3_mega_s
Napkins/tissues box. You can use ideaMaker to add any texture you like https://www.ideamaker.io/texture.html.
A 3x3 (126 x 126mm) Gridfinity box that holds 2 tempo tissues packs next to each other. (108 x 108mm inner space). Thanks to @jdegs who provided the Filled-in Gridfinity Boxes (For Customization) that I used as a base for this model.
Holder for tissues box under the shelf. You can screw it or stick it to the shelf. For 55 mm high box. Print Settings Printer Brand: Prusa Printer: i3 MK3 Filament: PM PLA Category: Household
*** Be aware that there is no way back, takes time and money - consider buying new printer first. But I'm happy now and that what counts *** *** Discord to exchange knowledge and ideas as we keep improving IFast —…
A holder made for the LIDL size tissues, looking lego-like. Made for a office, so there is a logo of my company, feel free to print without the embosed text.
This is a remix/combo + cleanup of exellent MOD by SpartanDog3D and JASII adapter for CopperHead hotend. It uses 4mm OD and 3MM ID PTFE tube to feed filament from MMU to the extruder and it solved most of my issues (still better tune the…
This match for tissues protecter ptissue_stor (2) ptissue_2 or 2ptissue to mk3s The last one ptissue_stor (1) is for small objekt you ned to protect
This is a protective case for pocket tissues, designed to be printed in TPU. You can decorate your case with an image by adding a negative volume of 0.4mm thickness to the front wall (for instance, Prusa Slicer can extrude SVGs directly).…
This device lets you mount your phone on any gopro attachment. No support generation needed.
I was tired of my tissue box falling off the shelf when I took a tissue out. I have my tissue box on its side as its easier to remove a tissue when in bed, but the whole box wants to come with it. This is my solution and it works…
Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed. K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when…
This tissue holder is both an ecological and cost-effective item that you can 3D print in TPU and take it outdoors or wherever you need it. It has the same dimensions as a typical pack of ten paper tissues, but you will save money and…
A tissue box with a cap and a hole at the bottom to push the last few tissues up.
We’ve all been there. You’re browsing Printables and your 0.2 nozzle swaps to 0.8. Your TPU95A now has the tensile strength of PC. Your VOCs are about to seep out of your enclosure. All you can think about is bed adhesion. Your extruder…
An elegant single piece of tissues and toothpick holder
Another HSW-as-a-nightstand holder. Fits your favourite set of earplugs, one pack of tissues and a nasal-spray. Use the Fusion-file to adjust hole-dimensions, if needed.
Have you ever look at your tissues or papers for print sheet cleaning and wondered if you could turn them into a cool Prusamnet spool? In that case this model is just for you! What is Prusamnet PβDG ? Prusamnet PβDG ( Polyβ-D-Glucose or…
parametric model added too ig, just in case u want some special tolerances i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff
Wherever you go you will have people asking about your ish-shoes. Where did you get them? How did you get them? Or maybe they even have similar ish-shoes. These are the only ish-shoes you need!
Aufbewahrungsbox für Tempotaschentücher / storage box for Tempo tissues
Do you have many packs of tissues around the house? Do you want them all in order and close at hand? Print a gravity holder! Now it's longer (12 pack vs 10) and compatible with prusa mini!!! PLA layer: 0.2 infill: 10% You can use duble…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. I recommend printing a bit…
My car is not designed by my wife. So there is a need for tissue box to be resolved with easy access when lipstick is on wrong place during driving. So the only logical place was in the upper middle part of the cabin, whether she is…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. Overhangs are 40°. I…
✅ What’s new in V3 This V3 version introduces a true auto-centering roller geometry , inspired by real mechanical guiding principles: 3° inward taper (convergent draft angle) Larger diameter at the center Smaller diameter toward both ends…
To help me keep my desk tidier, I designed this tissue holder for the Ikea Skadis system. To mount it to the IKEA Skadis, simply use the awesome T-clips by Line Arc Line . Don't forget to share a picture of your print.
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is detachable and designed so that the outer casing can be replaced separately. Replaceable decoration printed in vase mode. To…
To help me keep my desk tidier, I designed this tissue holder for the Ikea Skadis system. To mount it to the IKEA Skadis, simply use the awesome T-clips by Line Arc Line . Don't forget to share a picture of your print.
parametric model added too ig, just in case u want some special tolerances i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff
Needed more grip on my ARs. This version was made for rifles that had issues due to the gas block location. If you need your grip in the perfect location, but due to the gas block, you could not put it there and had to compromise, this…
This tissue holder is both an ecological and cost-effective item that you can 3D print in TPU and take it outdoors or wherever you need it. It has the same dimensions as a typical pack of ten paper tissues, but you will save money and…
A 3x3 (126 x 126mm) Gridfinity box that holds 2 tempo tissues packs next to each other. (108 x 108mm inner space). Thanks to @jdegs who provided the Filled-in Gridfinity Boxes (For Customization) that I used as a base for this model.
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
