Search results: itr

Sort order

Counting matching models…

P
Printablesrobs3d

Nintendo Switch Gamestand - Vitrinenschuber

Easy to print Switch game stand for 11 Games. No Support needed!

Downloads
440
Likes
90
Rating
5
P
PrintablesBINGOBRICKS

GRAVITRAX - Magnetic Cannon / Gauss-Kanone

This is a magnetic cannon (Gauss cannon) for your GRAVITRAX marble run. For the assembly you also need a strong neodymium magnet with the dimensions 20x5mm. In addition, I recommend that you use two 3M screws and nuts to assemble the…

Downloads
303
Likes
49
Rating
5
P
Printablesakmiller01

Press-fit music stand for Alesis Nitro Mesh drumkit

Fits snuggly over one of the vertical leg posts of the Alesis Nitro Mesh drumkit. Can hold light books or sheet music up to 15 mm thick. Diamond cut-out saves a bit of print time and material, but I've also included a solid version of the…

Downloads
252
Likes
38
Rating
5
P
PrintablesMarkus

First aid kit door holder for Opel Rocks-E/Citroen Ami

A pocket/holder to mount in the door of an Opel Rocks-E (or probably Citroen Ami) that can hold a small first aid kit (e.g. the one required by German law). As it is, the holder fits in the rear corner of the right side door (or the front…

Downloads
245
Likes
14
Rating
0
P

Citroen Berlingo otevírání kapoty

Car Bonnet Lock Catch Repair Handle For Citroen Berlingo Peugeot Partner 2008-on 7934e7 Automobiles Handle Opener

Downloads
192
Likes
12
Rating
0
P
PrintablesJakub

Citroen C4 headlight cover

Lost a plastic cover for Citroen C4 Spacetourer. Printed from PLA works for 3 years already. But I advise to print it from TPU or some flexible material.

Downloads
179
Likes
41
Rating
5
P
PrintablesErikSi

059 Vorsicht: Spielende Zahlen! - Gravitation with Gravitrax

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Downloads
125
Likes
24
Rating
4.75
P
PrintablesTyson

Optitrack M4 marker base

A printable base for Optitrack's M4 spherical reflective markers. Print in PLA or ABS at 100% infill, with detailed layer height (0.1mm)

Downloads
115
Likes
1
Rating
0
P
PrintablesJrmaker59

pommeau vitesse citroen berlingo

j'ai créer ce pommeau de vitesse car celui d'origine de mon Citroën Berlingo du a son Age commencé a partir en miette j'ai repris les côtes avec mon pied a coulisse et j'ai tous reproduit a l'identique afin de le fixer sil suffit de…

Downloads
53
Likes
6
Rating
0
P
PrintablesGrogg3D

Streetwize 10 & 8 Litre Portable Pressure Washer Sprayer Hose-to-Handle Coupler

The Streetwize 10 (or 8) Litre Portable Pressure Washer Sprayer is handy but one of the major weak spots is the connection between the hose and the gun/handle. It measures on 6mm in diameter. This is a replacement built from the ground…

Downloads
26
Likes
7
Rating
0
P
PrintablesSoCalNorseGod

Drive Nitro Rollator Walker 28.55mm endcap

End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS

Downloads
23
Likes
3
Rating
0
P
PrintablesProfessorBoots

DIY RC SemiTruck

This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer. Future trailers such as side dumps, lowboys, belly dumps and cargo trailers…

Downloads
9,926
Likes
2,116
Rating
4.85
P
PrintablesPeter Davis

Another Nitrile Glove Box Dispenser

While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…

Downloads
5,256
Likes
1,850
Rating
4.92
P
PrintablesMatthijz98

Gravitrax spacers in many sizes

These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…

Downloads
5,168
Likes
450
Rating
4.87
P
PrintablesM1nt1x

Gyro Keychain (Volkswagen, Mercedes, Seat, Citroen, ..more to come)

This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…

Downloads
4,641
Likes
432
Rating
4.9
P
PrintablesJDO solutions

Marble track - Motorized Lift 2021 version (v4) - stand-alone height adjustable Gravitrax compatible!

Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…

Downloads
3,533
Likes
468
Rating
4.92
P
PrintablesJDO solutions

Marble track - rails (Gravitrax compatible)

I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…

Downloads
3,265
Likes
304
Rating
4.97
P
Printablesdeepblue4200

Gravitrax spacers 1 to 7,10,14,15 tiles high

These spacers are easy to print do not require supports or any glue. They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL. Since they fit tight with themselves and original tiles I wanted to have some smaller ones as…

Downloads
2,818
Likes
239
Rating
4.85
P
PrintablesIt'sMoxie

Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud

Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…

Downloads
2,699
Likes
243
Rating
4.88
P
PrintablesMatthijz98

21 different Gravitrax tiles

All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…

Downloads
2,614
Likes
320
Rating
4.97
P
PrintablesJDO solutions

Marble track - basic tile v2 (Gravitrax compatible)

update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…

Downloads
2,597
Likes
186
Rating
4.91
P
Printablescrudo

Gravitrax bridge

Gravitrax compatible bridge for multilayer tracks without supports

Downloads
2,528
Likes
290
Rating
4.94
P
PrintablesJDO solutions

Marble track - 16 different tile insets (gravitrax compatible by using my 6 exits basic tile)

16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…

Downloads
2,224
Likes
286
Rating
4.94
P
PrintablesGoldichForge

Nitril Glove Holder for Honeycomb Storage Wall (HSW)

This downloadable 3D model is a nitrile glove holder designed specifically for use with the Honeycomb storage wall system by RostaP. Features: Compatibility: Seamlessly integrates with Honeycomb storage wall panels. Material: Designed for…

Downloads
2,216
Likes
572
Rating
4.63
P
PrintablesGunnar Lachmann

Gravitrax Corkscrew

I divided it into two parts for better printing, if you have trouble with the overhangs. You'll need a lot of power to get through: https://www.thingiverse.com/thing:4800097 helps, normal gauss won't work Video:…

Downloads
2,125
Likes
266
Rating
4.87
P
PrintablesDennis M

Eiffel Tower Gravitrax scene

Scenic tile! Add some travel destinations for your Gravitrax marbles with the addition of the Eiffel Tower pass through tile. My wife did one setup where she put this tile in the middle of a bunch of wavy slow rails and she called it the…

Downloads
1,861
Likes
204
Rating
4.88
P
Printablescrussty

Nitrile Glove Box Holder

I saw a similar holder for glove boxes at a local store and thought it would be easy enough to model and print my own way. This allows for mounting using screws in the keystone slots, or using (6) magnets. If it slides with the magnets,…

Downloads
1,818
Likes
179
Rating
5
P
PrintablesBenjamin

GRAVITRAX tower with marble track channel. Gravitrax kompatibel Turm mit Ball Kanal. Gravitrax Tunnel

This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:

Downloads
1,607
Likes
226
Rating
4.71
P
PrintablesRockChalkAZ

Gravitrax Compatible Straight Rails

These are straight rails for use with Gravitrax Print instructions Category: Mechanical Toys Summary These are straight rails for use with Gravitrax

Downloads
1,581
Likes
131
Rating
4.95
P
PrintablesJDO solutions

Marble track - hammer (Gravitrax compatible when using my basic tile)

Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…

Downloads
1,549
Likes
166
Rating
4.75
P
PrintablesSwan_Kikaku

Curved Rails for Gravitrax

While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own. I also made…

Downloads
1,503
Likes
190
Rating
4.92
P
PrintablesSeppel

GraviTrax Junior 5 Fach Höhenstein / high stone

Fünf auf einen Streich… Mit Stützstrucktur (nur für den Absatz unten) Standardmodell - ca. 33g (einfacher Druck) Lightmodell - ca. 23g (relativ großer Überhang, hat bei mir ohne zusätzliche Stützstruktur funktioniert)

Downloads
1,492
Likes
90
Rating
4.93
P
PrintablesGFS

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Downloads
1,453
Likes
119
Rating
4.83
P
PrintablesMax Mühlstädt

Gravitrax Höhenstein/ Gravitrax Spacer

Gravitrax Höhenstein. Passt mit originalen Zusammen und hält stabil auf der Platte. Gedruckt aus PETG. Der Höhenstein sollte mit der eigentlichen Oberseite auf dem Druckbett gedruckt werden. Support auf dem Druckbett sollte aktiviert…

Downloads
1,433
Likes
99
Rating
5

Ben 10 Omnitrix (original series) Remix

I added a printable hinge joint and turned the snap cap into a threaded cap. Makes for a less cumbersome “install” and wear. Print the cap face up with tree supports for better quality. Print the watch on a side edge (as pictured) with…

Downloads
1,407
Likes
74
Rating
4.75
P
PrintablesBas

Gravitrax high speed curve

My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…

Downloads
1,389
Likes
150
Rating
4.84
P
PrintablesRockChalkAZ

Gravitrax Compatible Spacer (various heights) No Support Needed

This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.

Downloads
1,365
Likes
119
Rating
4.92
P
PrintablesSwan_Kikaku

Serene Funnel for Gravitrax (25/1/28 v1.1 uploaded)

A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…

Downloads
1,347
Likes
150
Rating
4.94
P
Printableswill rollup

wave rail for gravitrax

this amazingly fun addon for gravitrax adds a fun new twist to your existing tracks. it suddenly drops and then comes right back up, it incredibly satisfying & smooth!

Downloads
1,334
Likes
181
Rating
5
P
Printablesuhltimate

Magnetic Kickback - Reverse Gauss Cannon - Gravitrax Extension

This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…

Downloads
1,298
Likes
299
Rating
4.92
P
PrintablesJDO solutions

Marble track - horizontal loop (gravitrax compatible by using my 6 exits basic tile)

A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…

Downloads
1,289
Likes
161
Rating
5
P
PrintablesKay | 3D Models

Cupholder for Citroen Jumper, Fiat Ducato & Peugeot Boxer

This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…

Downloads
1,284
Likes
93
Rating
3
P
PrintablesTelles0808

Da Vinci's Vitruvian Man

The 3D-printed Vitruvian Man brings Leonardo da Vinci’s famous drawing into a new dimension. This version transforms the two-dimensional study of human proportions into a bumped display, capturing and merging classical art with modern 3D…

Downloads
1,268
Likes
327
Rating
0
P
PrintablesMatInCat

Snake rail for Gravitrax

A fun rail for gravitrax. The rail is a larger wobble rail. Designed in OnShape.

Downloads
1,266
Likes
124
Rating
4.67
P
PrintablesMatthijz98

Gravitrax brige plates

These bridges give some new possibilities and can help save some spacers. Al files can be printed without any supports

Downloads
1,247
Likes
151
Rating
4.92
P
PrintablesPokot

Gravitrax hexagonal plate

I first designed the plate as one piece based on the original cardboard and then “cut” it into 4 different pieces in order to print it. Use the 4 files gravitrax_hexa_plate_top_left, gravitrax_hexa_plate_top_right,…

Downloads
1,191
Likes
124
Rating
4.57
P
Printablesthomas

Marbletrack - Spiral (Gravitrax compatible)

The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…

Downloads
1,182
Likes
185
Rating
4.8
P
PrintablesPrint-3D

Gravitrax-compatible height unit

An accesory to lift your Gravitrax-rails. Use the enclosed F3D.-File to scale the height to your needs. Contains files for: 1HU - original height 2HU 3HU 4HU 5HU 10HU Print instructions Print in PLA. No support needed.

Downloads
1,167
Likes
69
Rating
5
P
Printablesuhltimate

Powerful Magnetic Marble Cannon (Easy Reload) - Gravitrax Extension

Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…

Downloads
1,066
Likes
180
Rating
4.96
P
PrintablesStefan

Tunnel for Gravitrax V2

The stones are as high as 2,5 height stones. There are two parts on every design. Print the inlay up side down and glue them together. For the STLs use the “split to object” function in Prusaslicer to split the parts. Update 2022-04: I…

Downloads
1,046
Likes
114
Rating
4.75
P
PrintablesBINGOBRICKS

GRAVITRAX - Catcher for the catapult

This is a catcher for your Gravitrax catapult. Use it together with the original Gravitrax base stone. The special thing about this catcher is that you can use the inset to choose which exit the ball should take. Tip: Glue the funnel into…

Downloads
1,046
Likes
128
Rating
4.94
P
PrintablesTom

Gravitrax, Spacer, 10mm

I had two design goals. First a fast print. And second in one piece without support. For the last goal the inner plate was skipped. AFAIK this surface isn't necessary in any condition. The spacer is still stiff. Even more, now a marble…

Downloads
1,045
Likes
73
Rating
4.93
P
PrintablesSHK

Clips garniture de porte PEUGEOT PARTNER PHASE 1 / RENAULT KANGOO PHASE 1 / CITROËN BERLINGO PHASE 1

Yo la commu' Voici le modèle de clips de garniture reproduit sur mesure de l'original, mais rayonné aux endroits sensibles. Pour Peugeot partner et clones 😎👌 Pour l'impression : Couches adaptatives préférable. Impression fine conseillée.…

Downloads
1,033
Likes
136
Rating
5
P
PrintablesMarkuzzzi

Christmas Card "CircuiTree"

This is a christmas card for all nerds! I designed this as a greeting for my IT colleagues, hope they'll like it. At 100% scale, this is a standard A6 postcard (105mm x 148mm). What is needed? Simply use the provided step or stl file and…

Downloads
1,027
Likes
674
Rating
5
P
PrintablesChristian

Peugeot Partner / Citroen Berlingo Smartphone Adapter

i wanted to use a “professional” smartphone Holder, bute the placing in our Peugeot Partner wasnt good So this is an adapter for the use of Smartphone holders that are normally fitted to those venting grills It should fit to Citroen…

Downloads
1,014
Likes
68
Rating
5
P
PrintablesORM

Gravitrax base tile

This is my version of the Gravitrax compatible baseplate with 6 exits and interchangeable insets as well as corner holes for height blocks - all for the construction of flexible tracks. To be able to use this building block, you need to…

Downloads
1,014
Likes
101
Rating
4.94
P
PrintablesDzip1

Seat Belt Buckle Dacia Duster, Volkswagen Touran, Škoda, Citroen etc.

Seat Belt Buckle Dacia Duster, Volkswagen Touran, Citroen C4 Picasso (II. Gen) and others Note: Not intended for use while driving with a passenger. -If you decide to use this adapter for tying small animals, it should be more suitable…

Downloads
1,014
Likes
97
Rating
5
P
PrintablesEndersen

Trichter - Gravitrax Kompatibel

Remixed from Thingiverse User thomasdr if you like my model please leave a like there

Downloads
1,002
Likes
122
Rating
4.86
P
Printablesoxygene

High speed curve (Gravitrax compatible)

To print in two colors like in the images, set up your slicer to change filament at approx. 10.5 mm. For best results, place a dummy cube next to the object and make sure that it is printed first on every layer so that the nozzle is clean…

Downloads
978
Likes
143
Rating
4.95
P
PrintablesChriz

Stacker for Gravitrax rails

Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!

Downloads
973
Likes
179
Rating
4.92
P
PrintablesJDO solutions

Marble track - motorized lift - v3 - stand-alone height adjustable Gravitrax compatible!

——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…

Downloads
967
Likes
142
Rating
5
P
PrintablesSyrusOO

Nitrile Glove Box Holder wall mount

I wasn't too excited about the options for wall-mounted dispensers so I made this with some better flowing edges. Able to print on the Prusa mini which is a 150x150x180mm print bed. Will fit boxes up to 135mm x 82mm which is the size of…

Downloads
965
Likes
75
Rating
5
P
PrintablesEndersen

Gravitrax Spacer 50-100mm

Meine 140mm Spacer findet ihr hier: https://www.printables.com/de/model/17152-spacer-140mm-gravitrax

Downloads
961
Likes
113
Rating
5
P
PrintablesFanofgenetics

All basic GraviTrax Junior pieces (no support)

UPDATE: The reported issue with the bridge has been solved. Additionally, you can now downland both right to left and left-to right orientations of the bridge. This collection of GraviTrax Junior-compatible tiles contains replacements for…

Downloads
936
Likes
85
Rating
4.67
P
PrintablesEndersen

Spacer 140mm - Gravitrax

140mm Spacer für Gravitrax Hier findest du noch andere größen https://www.printables.com/de/model/511208-gravitrax-spacer-50-100mm if you like my model please leave a like there

Downloads
927
Likes
111
Rating
4.6
P
PrintablesClemi

Extendable rail marble track - gravitrax compatible

An extendable track for your marble run compatible with Gravitrax. Depending on the height, the original rails were always a little too short. With this track you can adjust the length variably. Print instructions: You can print it…

Downloads
927
Likes
142
Rating
4.89
P
PrintablesDennis M

Statue of Liberty Gravitrax scene

UPDATE I'm working on printing this and I think it might be a little small. The printer is having some trouble with the statue's details. I'm going to try a slightly larger model and see how it works and I'll update the files here soon.…

Downloads
922
Likes
91
Rating
4
P
Printablesmfraz74

Peugeot Boxer, Fiat Ducato, Citroen Relay (2006-2023) Drink Cup Holder

Printed in black PETG with 0.2mm layer height, 4 walls and 30% infill. I would recommend using PETG as a minimum, for layer height you could go to 0.24. 4 self tapping screws are required per side. Update 10/11/24: Added modified cup…

Downloads
890
Likes
100
Rating
5
P
PrintablesJDO solutions

Marble track - elevation system (gravitrax compatible)

The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…

Downloads
881
Likes
91
Rating
4.88
P
PrintablesNexl

45° angle cutting tool - mitre box

I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top

Downloads
881
Likes
159
Rating
5
P
PrintablesDimension Zero

GraviTrax Junior Raiser (1-5cm)

These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs

Downloads
860
Likes
61
Rating
4.8
P
PrintablesNinomalbinho

Lego Vitruvian Man Wall Art

A great Wall Art of Lego Vitruvian Man. Do not forget to upload your makes, thanks ! Inspired by a sticker Here are my others Vitruvian man remixes : Minions Vitruvian Man Playmobil Vitruvian Man Stitch Vitruvian Man Sponge Bob Vitruvian…

Downloads
846
Likes
284
Rating
5
P
PrintablesSeppel

GraviTrax Junior Brücke / Bridge

Durch diese Brücke spart man sich nicht nur viele Höhensteinen, sondern hier können neue Ebenen geschaffen werden. Die Mitte ist zwei Steine hoch. Sehr einfacher und schneller Druck. Die Drei Steine mit der großen flachen Fläche mit…

Downloads
837
Likes
75
Rating
5
P
PrintablesORM

Gravitrax insets

This is a set of Gravitrax compatible 'standard' inserts. More of my models Click here if you are interested in seeing more of my models for Gravitrax Feedback is always a good thing. To encourage me or other designers to make more…

Downloads
823
Likes
110
Rating
5
P
PrintablesORM

Gravitrax pillars

One of the cornerstones of the Gravitrax system is building at height. These columns are a flexible way to build the marble tracks in an efficient way. The advantage is that the columns together with the base plate are flexible and allow…

Downloads
803
Likes
118
Rating
5
P
PrintablesDusBus

GraviTrax Junior compatible spacer

Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…

Downloads
789
Likes
59
Rating
4.8
P
PrintablesDennis M

Big Ben Gravitrax scene

Continue your Gravitrax marble tour around the world by visiting London and seeing Big Ben! I'm enjoying adding some scenery to our marble layouts and will be doing a bunch more. Enjoy! This is a remix of these models:…

Downloads
786
Likes
115
Rating
5
P
PrintablesMatthijz98

Gravitrax randomizers 2/3/6 ways

Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.

Downloads
785
Likes
137
Rating
5
P
PrintablesRockChalkAZ

Gravitrax Compatible Wiggle Rail

This is a high quality curving rail compatible with the Gravitrax brand marble run. This is designed to be easy and reliable to print with minimal post processing. There is a single layer of "support" built into the model to ensure that…

Downloads
779
Likes
99
Rating
4.83
P
PrintablesBenjamin

Opel Rockse Citroen Ami door cover - Opel Rocks-E und Citroen Ami Abdeckung für Tür mit / ohne Chiphalter

Der Opel Rocks-E und der Citroen Ami haben das Problem, dass es im Winter recht zugig ist. Der Fahrtwind sammelt sich in der Türgriffmulde und zieht durch das Schloss in die Tür. An der Lasche zum Schließen der Tür ist eine Öffnung. Dort…

Downloads
773
Likes
26
Rating
5

NITROUS - 3D Printed RC Car

Hi guys! I present here my new project, a mini RC Car, easy to print and assemble but very fast and agile. It's a super fun and reliable model and I recommend everyone to do it, you'll have fun! The parts list, print settings and all the…

Downloads
770
Likes
126
Rating
5
P
Printablesoxygene

S-Curve (Gravitrax compatible, easy print)

S-Curve compatible with Gravitrax. Easy to print , needs only support where the hooks are (see image), all other overhangs are 45 degrees at most. Maybe you can even turn off support at all if you print slow enough and your…

Downloads
756
Likes
107
Rating
4.91
P
PrintablesFanofgenetics

GraviTrax Junior compatible Tunel

UPDATE: now also includes tunnel with a slope With this model, you can print a tunnel compatible with the GraviTrax Junior and extend your marble run building options. This model can be printed without any support and assembled without…

Downloads
745
Likes
61
Rating
5
P
PrintablesJDO solutions

Marble track - lane switch (Gravitrax compatible when using my 6 exit basic tile)

This is a lane switcher which causes half of the balls running through the marble track to go left and the other half will travel right. It consists of to parts which can be clicked together to prevent them to be separated when storing…

Downloads
739
Likes
83
Rating
4.75
P
PrintablesRockChalkAZ

Gravitrax Compatible Tile 1

An improved tile compatible with the Gravitrax brand marble run. This tile consists of a single straight and two sharp turns. No supports are required and the design incorporates a small chamfer on the bottom that nearly eliminates the…

Downloads
736
Likes
78
Rating
4.9
P
PrintablesDennis M

Leaning Tower of Pisa Gravitrax scene

Presenting the leaning tower of Pisa in a Gravitrax tile to continue the scenic tour around Europe. Have your marbles enjoy the views while using gravity to follow your pre-determined paths along the way! Printed with two different…

Downloads
734
Likes
99
Rating
4.86
P
PrintablesBINGOBRICKS

GRAVITRAX - Seesaw / Wippe

This is a seesaw for your GRAVITRAX marble run system. The special thing about this seesaw is that you can use it with 2, 3 or 4 balls. Use the dividers to keep the desired number of balls in the seesaw. Remember that there must be at…

Downloads
734
Likes
120
Rating
4.45
P
PrintablesFlexi-Maker

Gravitrax seesaw

Kompatible Gravitrax Wippe Kleine Feinarbeiten durch schleifen notwendig.

Downloads
731
Likes
128
Rating
4.2
P
Printableshebbet

Gravitrax Tower Gravitrax Turm

A tower for Gravitrax printed in PLA. Support not needed

Downloads
717
Likes
100
Rating
4.75
P
PrintablesDom360

Gravitrax Junior - Base Plate/Foundation

v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…

Downloads
710
Likes
57
Rating
5
P
PrintablesMakerTom

Citrus/Lemon Press - Support-free v2

Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s. v2 provides larger juice volume and a optimized outlet, less dripping and better juice flow. The dome is…

Downloads
707
Likes
74
Rating
4.67
P
PrintablesPavelB

Wheel Center Cap (Citroen and universal blank)

The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…

Downloads
689
Likes
61
Rating
5
P
PrintablesEndersen

5° Spacer - Gravitrax

if you like my model please leave a like there

Downloads
685
Likes
113
Rating
4.71
P
Printablesdelta2529

Acer Nitro 5 (2019) Laptop Raisers

Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…

Downloads
668
Likes
51
Rating
5
P
PrintablesORM

Gravitrax tilted spacer blocks

Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…

Downloads
665
Likes
69
Rating
4.64
P
PrintablesJoH

Organizer for Gravitrax elements

The organizer is a simple plate with 8x3 Slots for Gravitrax elements, and can store up to 24 elements. Even most special elements fit, although they will block other slots. Freecad file for easy modification included. I printed with 2…

Downloads
665
Likes
125
Rating
5
P
PrintablesDom360

Gravitrax Junior - Curved Slope

See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces Update: updated models to not catch the marble if its going too slow

Downloads
654
Likes
44
Rating
5
P
PrintablesHonzal

Gravitrax Ballista-pipe

materiál PLA tryska 0,4 mm vrstvy 0,20 mm počet kusů naznačen v názvu souboru šroub M8x8 + matka 2x šroub M3x18 do otvorů 1,8mm možno zakotvit filament jako nárazník

Downloads
636
Likes
127
Rating
4.6
P
PrintablesJDO solutions

Marble track - collectors (gravitrax compatible by using my 6 exits basic tile)

2 collectors which can be used in my basic tile to create new marble tracks. One is the drop collector, which catches the ball from a higher level, redirecting it to a rails to continue it's journey. The other is the endpoint of a marble…

Downloads
628
Likes
73
Rating
5