Search results: ixo

Sort order

269 models

P
PrintablesJohann

Omnifixo - Field Box slim version

This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…

Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,482
Likes
1,056
Rating
5
P
PrintablesJohann

Omnifixo M4.4 Insert/Dividers

These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
553
Likes
144
Rating
4.94

Boat Prop Propeller for RC Boat (Contixo T2)

It actually needs work for top performance.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
261
Likes
12
Rating
0
P
PrintablesSpiglik3D

Paint holder - Držák fixových barev (S3D)

Držák fixových barev. Po vytištění je nutné díly slepit.

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
7
Rating
0
P
Printablesarevi

Magnetic PCB holder (OMNIFIXO compatible)

Revision history: 27/01/24 added the STEP files, which may be particularly useful if you want to adjust the slots for the magnets inside the guiding rails. 01/02/24 added an alternative guiding rail version with cutouts for round magnets…

Downloads
1,008
Likes
679
Rating
4.5
P
PrintablesPosterBored

Omnifixo Pinecil Case

My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…

Downloads
716
Likes
246
Rating
4.89
P
PrintablesClumsy Badger

Bosch IXO mount for IKEA SKADIS

Bosch IXO holder remixed for attachment to the IKEA SKADIS pegboard. This has been getting a lot of love since I transferred this from Thingiverse to Printables - credit needs to be given where credit is due, as I merely re-mixed a…

Downloads
615
Likes
108
Rating
4.95
P

Den Den Mushi from Donquixote Doflamingo

The tele snail from Donquixote Doflamingo from One Piece! Size: 13cm (1:1)

Downloads
507
Likes
52
Rating
0
P
PrintablesFab Lab León

Omnifixo - Field box for TS80P Soldering Iron

Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…

Downloads
496
Likes
128
Rating
5
P
PrintablesBurger Beagle

Ultimate Omnifixo Pinecil Travel Case

I was inspired by the few Omnifixo Pinecil case designs, but wanted a version that would also hold solder and a brass sponge so I had everything I needed to solder on the go. This version will require 4x 10mm ball bearings. These ball…

Downloads
492
Likes
177
Rating
5

Llavero nombre Abdoul,Adriana, Ainara, Alba, Alexia, Breixo, Candela, Carmen, Celia, Claudia, David, Diego, Enma, Gael, Heyli, Lia, Lois, Lucas, Mar, Marc, Martina, Mauro, Mikel, Naia, Nayra, Noa, Pepe, Pedro, Samuel, Sara, Teo, Valentina, Xavi, Xoan, Zoe

Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…

Downloads
393
Likes
22
Rating
5
P
Printablesmeffken

Omnifixo compatible ultimate Soldering Kit

Tried to max out my Soldering Game. This is a box that fits for the best third hand in the world, called Omnifixo. I was inspired by the Box from Fab Lab Leon, but wanted to take some more stuff with me and therefore designed my own.…

Downloads
343
Likes
126
Rating
5
P
PrintablesMr H Shroud

(Limbus Company) Don Quixote Coin

Hello everyone. As of right now this is the final coin made, I am making Ryoshu's coin and will try to get that uploaded on New Year's Eve. But here is my favorite sinner's coin. These series of models were uploaded much earlier on my…

Downloads
278
Likes
8
Rating
5
P
Printablesbernard maurin

Omnifixo clamp model

3D model of the Omnifixo clamp and magnet for all your modeling needs.

Downloads
277
Likes
59
Rating
0
P
PrintablesXkonti

Omnifixo - Field Box with divider

This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…

Downloads
273
Likes
44
Rating
5
P
PrintablesAkio

Omnifixo Extentions

I love my Omnifixo clamps. They are so far the best third hand I have found. But for clamping some objects it would be helpful if the clamps could be on different heights. Sure, you can stack the yellow parts of the clamps, but as there…

Downloads
262
Likes
194
Rating
5
P
PrintablesModel Magic

The Walking Dead - "Daryl Dixon"

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
245
Likes
35
Rating
0
P
Printablesj0shi

Gridfinity Soldering Stack, includes Omnifixo, TS80p, SS-02

Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…

Downloads
239
Likes
83
Rating
5
P
PrintablesClemi

Ixo Bit Holder for ikea skadis T-Nuts

Just a simple ixo Bit-Set holder for ikea skadis using T-Nuts. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . For more Skadis…

Downloads
237
Likes
60
Rating
5
P
PrintablesRockarm

Bosh IXO Honeycomb Wall

Bosh IXO adapter for Honeycomb Wall

Downloads
235
Likes
27
Rating
5
P
PrintablesFunkyArt

ModulIX-O - Universal Micro Drill press - Bosch IXO, Dremel, Makita,. (Mini-Standbohrer)

ModulIX-O is a tiny but solid and complete screw less Drill-press. I was looking for a smart solution to make precise holes in small parts. So I decided to do this one. I wanted a solution that don't need to use screws or any other…

Downloads
204
Likes
53
Rating
4
P
PrintablesBinoffline

Bosch IXO wall mount

Simple wall mount for the Bosch IXO Print Settings Printer: Spark Cube XL Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 15-20 Infill: 25%-35% Category: Tool Holders & Boxes

Downloads
199
Likes
14
Rating
4.5
P
Printables3DMegoldasok

Bosch Toy screwdriver ixolino BIT

Bosch Toy screwdriver ixolino BIT Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: min. 30%

Downloads
189
Likes
14
Rating
5
P
Printablesplanetar

Don Quixote - Printed Drawing

A printed drawing that creates the image of Pablo Picasso's sketch of Don Quixote and Sancho Pansa. This is meant for 2 color printing. The base has 0,52 mm and then the drawing follows with 0,4 mm. Slice it with a layer height of 0,2 ,…

Downloads
177
Likes
11
Rating
0
P
PrintablesTim Malmgren

Base for Omnifixo

Base for Omnifixo - Third-hand A 3D printed base for your Omnifixo. An enclosure that allow you to store the “hands” and makes it easier to use on the go! It have been helping me a lot since I am always on the move. There are 2 slots for…

Downloads
176
Likes
62
Rating
5
P
Printablesgltovar

Omnifixo Helping Hands Display and Travel Case. Gridfinity 4x2

If you are unfamiliar with the Omnifixo, it is by far the best “helping hands” system I have used for soldering. https://omnifixo.com I wanted to create an compact footprint Omnifixo case that was also compatible with Gridfinity. The…

Downloads
171
Likes
62
Rating
5
P
PrintablesDaniel Uroz

Eixo Z Ajustavel do laser TTS 55 Pro

Reaproveitei um pedaço de um fuso T8 passo 6 como eixo, o Knob e o carrinho já são impressos com rosca trapezoidal para este padrão “ender 3 e similares” mas pode ser alterado facilmente. Impresso com 5 perimetros, 6 base e 7 topo com 20%…

Downloads
166
Likes
13
Rating
0
P
PrintablesJAV3D

Pastamatic spoolwinder Bosch IXO adapter mount

English Description of the 3D-Printed Adapter for the Pastamatic Spool Winder and Bosch IXO Cordless Screwdriver: This 3D-printed model is an adapter designed to connect the Pastamatic spool winder with a standard Bosch IXO cordless…

Downloads
160
Likes
36
Rating
5
P
PrintablesUdo2017

Bosch IXO Skadismount

Remix of the Bosch IXO Wallmount by Sponge for Skadis Wall I recommend to print in PETG

Downloads
160
Likes
21
Rating
5
P
PrintablesTJ78

Bosch IXO Aufsatzhalter / Bosch IXO attachment holder

The perfect piece for the workshop to keep everything neatly organized. I recommend 3 wall lines, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill Feel free to check out all my little gadgets for the workshop.

Downloads
157
Likes
24
Rating
5
P
Printablesdave818

Snap-on feet for Divoom Pixoo-64 display

I received one of these for Christmas. I wanted to put it on a shelf but came with nothing, so I put this together. Really simple design. The critical dimension is 16.75mm for the width of the cutout and the height should be less than…

Downloads
156
Likes
14
Rating
5
P
PrintablesMartin Žák

Box pro Omnifixo a TS100

Tištěno z PLA+ Mladeč, magnety 10x3mm od Unimagnet.

Downloads
153
Likes
43
Rating
5
P
PrintablesTomáš j Hajda

Bosch IXO Adapter Holder for Skadis

As said…for my beloved Skadis board I printed and designed several holders. For my Bosch Ixo screwdriver I used this model . But then the problem came. Still had those Angle and Off-set Angle adapters laying around. After I spent third…

Downloads
152
Likes
23
Rating
5
P
PrintablesModel Magic

The Walking Dead - Daryl Dixon

The Walking Dead - Daryl Dixon

Downloads
151
Likes
19
Rating
0
P
PrintablesMonty

Bosch IXO 7 Mount

I designed this for easy access to the screwdriver and accessories. It's designed so the screwdriver can be taken out and replaced easily and can be stored with a hex bit in place. Gridfinity base so I could mount it where my current…

Downloads
151
Likes
17
Rating
4
P
PrintablesLomax1983

Gridfinity Bosch IXO

Gridfinity screwdriver insert Bosch IXO. Two insert variants, with horizontal adapters and vertical adapters.

Downloads
150
Likes
8
Rating
5

TWD The Walking Dead: Daryl Dixon

3D sken sošky Daryl Dixon

Downloads
149
Likes
12
Rating
0
P
PrintablesPjotrStrog

Omnifixo M4.4 Closed Tray Insert

A tray for the Omnifixo M4.4 fieldbox to allow it to be removed with content and use Omnifixo vertically. Two versions are included: one with the layout of the original divider and one with larger compartments. Update: Added two versions…

Downloads
147
Likes
30
Rating
5
P
PrintablesDrizzthacker

Retention Clip for Pastamatic with IXO

Print 100% infill. I've used PETG because it need to be flexible. Mount between the adapter and the spool winder as you can see in the image

Downloads
146
Likes
10
Rating
5
P

Omnifixo base with Gridfinity Magnets

a modification to Tim Malmgren's Omnifixo base that uses 6x2mm (gridfinity) magnets

Downloads
144
Likes
33
Rating
4.5
P
PrintablesSleepy

Bosch Ixo Skadis

Took the original design (which is awesome!) and added holder for the bits and the charging cable Print Settings Printer: Eryone ER-20 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 20% Filament: Cerprise PETG White Notes: I…

Downloads
129
Likes
14
Rating
5
P
PrintablesNeolker

Quixo

This is a modified version of popular game Quixo, which is similar to Tic-tac-toe, but quite complex to play. Almost everyone has played classic Tic-Tac-Toe. Almost everyone who plays Tic-Tac-Toe also has their own tactics. But are your…

Downloads
129
Likes
28
Rating
5
P
PrintablesTobiasB

IKEA Skadis Holder Bosch IXO

Mount two Attachments for the Bosch IXO to your IKEA Skadis Board.

Downloads
127
Likes
19
Rating
5
P
PrintablesGustavo

Standing Dustpan for 22mm Broom Handle / Pá de lixo

This 3D model is a custom-designed standing dustpan head, created to fit a standard 22mm diameter broom handle (handle not included). Designed for use in a standing position, this dustpan model features a vertical handle socket to provide…

Downloads
120
Likes
23
Rating
0
P
Printablesmadejackson

Rugged Pinecil XXL Omnifixo + BaseUS 65W Battery Insert

Insert that fits into the deep part of the Rugged Pinecil XXL Case . It features mounts for a USB PD 65W 20Ah Battery from baseus and an Omnifixo. Model Link:…

Downloads
115
Likes
66
Rating
5
P
PrintablesTech_Outreach

Daryl Dixon Walking Dead Coaster and Holder

Here is my Walking Dead Daryl Dixon Coaster. Three coasters fit perfect in the Coaster Holder Print instructions Unassociated tags: daryl dixon Category: Food & Drink

Downloads
113
Likes
9
Rating
0
P
PrintablesDennis

Case IXO 7 Bosch

Angepasstes Inlay für die Box. Sowie Implementierung des Logos.

Downloads
111
Likes
13
Rating
5
P
Printablesnicom1234

Omnifixo - Field box (alternative v2)

This is a remixed version of the original OMNIFIXO field box that can be found here: https://www.thingiverse.com/thing:5436769 I have edited the internal layout to fit a few more items and also redesigned the soldering stand to allow for…

Downloads
111
Likes
48
Rating
5
P
PrintablesScottW

Closed tray for Omnifixo M4.4 IM Field Box

Closed bottom tray for the Omnifixo M4.4 injection molded field box. The current M4.4 comes with an injection molded (IM) field box. I first tried the closed bottom tray remix created by @PjotrStrog, but it did not fit the IM box (his…

Downloads
110
Likes
24
Rating
5
P
Printableslayershifter

Bosch GSR 12V 10,8 IXO Makita Einhell TC-CT 3,6 Li Tool Holder for MultiClip

This holder is designed to fit modern 12V LiIon screwdrivers like the Bosch GSR and various Makita Models as well as the Einhell TC-CT 3,6 Li cordless stapler and many other tools. A smaller design for Bosch IXO is also included. It is…

Downloads
110
Likes
10
Rating
0
P
PrintablesBob Belansen

Omnifixo Pinecil Case Plus

I love the case PosterBored made, but when I went to use it for the first time I realized I really needed a brass sponge, and would like an extra tip available on the go. I also wanted a larger hole to put my solder roll in. So I've added…

Downloads
109
Likes
48
Rating
5
P
Printableseisenfliege

Bosch IXO Holster / Mount / Holder 5. Generation

Under table / Toolbox Holster for the Bosch IXO ( https://amzn.to/3m5ENTq ) electric screwdriver. Keeps the tool secure in place even vertically. Designed for the 5th generation but I have also tested it with 1st generation and it also…

Downloads
106
Likes
14
Rating
4.67
P
PrintablesCaptain Cant

Rugged Pinecil XXL Case - Omnifixo Accessory Remix

I loved the original design but didn't like how hard it was to grab the magnetic feet and helping hands from the bottom of the case. The design also limited use of that area for other things. This redesign attempts to fix that problem.…

Downloads
104
Likes
23
Rating
5
P
Printableswfvn

Bosch Ixo cogwheel

This Bosch Ixo needed replacement cogwheels. Unfortunately Bosch doesn't sell them. So I created them myself. Print Settings Printer: Original Prusa i3 Rafts: No Supports: No Resolution: 0.1 mm layer Infill: 50% Notes: Printed with 0,25mm…

Downloads
103
Likes
17
Rating
0
P
PrintablesSponge

Bosch IXO Wallmount

Bosch IXO Wallmount to save space on the desk. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 24 Notes: Infill-Type : 30 degree Post-Printing ============= Category: Organization

Downloads
101
Likes
13
Rating
5
P
PrintablesJulien Mairy

Don Quixote Bust

Don Quixote Buste Français : Ce buste de Don Quichotte propose une interprétation sculpturale fidèle du célèbre personnage issu du roman Don Quichotte de Miguel de Cervantes. Inspiré des représentations les plus emblématiques du chevalier…

Downloads
100
Likes
10
Rating
0
P
PrintablesDoblist

Bosch Ixo Stand

Easy to print stand for Bosch Ixo

Downloads
98
Likes
19
Rating
5
P
PrintablesTomTom

Busch und Müller ixon space Halter für Lenker MTB

Busch und Müller ixon space Halter , zur Montage am Lenker inklusive gummilippe geruckt aus TPU

Downloads
97
Likes
12
Rating
0

Acabamento eixo Z

Acabamento para cobertura da correia e polias do eixo Z

Downloads
96
Likes
14
Rating
0
P
PrintablesNinomalbinho

Don Quixotte

A new 3D figurine generated by AI, Don Quixote. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Downloads
95
Likes
12
Rating
0
P
PrintablesTobias Feld

Omnifixo - Pinecil box

This is pretty much for my own use, but I figured people might also have the same soldering iron & omnifixo combo and want to easily carry some basic stuff with them. I set the compartments this way to be able to store extra soldering…

Downloads
94
Likes
37
Rating
5
P
Printablesfleaz

NixOS Flake Keychain

That's the model I gave away to some people at NixCON23. Just add a colorchange at the last one or two layers depending on your layerheight to get a multi color print.

Downloads
94
Likes
11
Rating
5
P
PrintablesZero Makes

KeyBase, the 100%* printable Omnifixo alternative

20-Apr-2024 Update V1.0.1, read the ChangeLog file for more details KeyBase, the Omnifixo replacement you were looking for ? Looking for accessories for your KeyBase ? Check my official collection where I will add any model I find for it…

Downloads
94
Likes
51
Rating
5
P
Printablesskroob

Bosch IXO Stand

Deutsch: Einfache Halterung um den kleinen Bosch Akkuschrauber besser greifen zukönnen. So haben auch kleine Dinge seinen Platz! English: Simple stand for a better grip on the small Bosch IXO screwdriver. So even small things have their…

Downloads
93
Likes
11
Rating
0
P
Printablesjomojomo95

IXON Core Mounting for Blendr System

Busch & Müller IXON Core light mounting bracket for the Trek Bicycle / Bontager Blendr system. Uses the original IXON Core mounting clip from the standard bracket. Blendr sizes are same as GoPro mounts so this should be compatible with…

Downloads
91
Likes
6
Rating
0
P
PrintablesLeDomme

Omnifixo Storage Box

Revamped version of Mike Pensingers Omnifixo Storage Box

Downloads
89
Likes
34
Rating
5
P
PrintablesChristoph Caina

Wall-Mount for Bosch IXO Auxiliary Head (re-design)

I've deleted my previous designs of the IXO Auxiliary Head Wall-Mount and uploaded a remake of them. if required, I can add further combinations like a single mount also. 3 piece holder 4 piece holder same design base for all of them…

Downloads
86
Likes
11
Rating
0
P
Printablesripienaar

Bosch IXO Mount

It prints flat with no support, I used 15% infil and worked fine. My first published model and first design for something like this.

Downloads
85
Likes
9
Rating
0
P

Daryl Dixon knife

Daryl's knife form the walking dead

Downloads
83
Likes
6
Rating
0
P
Printablesdave.pinnock

Bosch IXO Electric Screwdriver Mount

A reasonably simple design to mount the Bosch IXO electric screwdriver (6th Generation) to a wall.

Downloads
83
Likes
7
Rating
4.5
P
PrintablesModel Magic

Band of Brothers - Captain Lewis Nixon - 2001

Band of Brothers - Captain Lewis Nixon - 2001

Downloads
82
Likes
13
Rating
5
P
Printablespyrho // 25.wf

Omnifixo Vertical Gridfinity Bin

A simple bin to hold your Omnifixo vertically. The bin has holese for 6x2mm magnets (press fit). Fusion 360 file included.

Downloads
81
Likes
19
Rating
5
P
PrintablesGamp

Gridifixo - Omnifixo Storage box

Fluff Do you like how Omnifixo snaps together into its own case? I do too, so feeling absolutely love-struck by that thing I tried to create a storage box for soldering utilities that works on the same principle. With serious snapping,…

Downloads
80
Likes
43
Rating
5
P
PrintablesYetti

Omnifixo Case / Box

Simple Case for Omnifixo https://omnifixo.com/ You need only 2 round Neodym Magnets 12x 3 And 4 silicone adhesive pads or you print your own TPU feets and glue it. I printed in Devil Design Blue with 0.4 Nozzle and 0.2 layer heigh on…

Downloads
80
Likes
31
Rating
5
P
PrintablesTritschi

Box for Omnifixo Makers Third Hand

Used Walter's SCAD (Thingiverse) parametric model to build this Omnifixo case or box. Remodelled the lid with emblem of Omnifixo (graphics copy, then traced in CorelDraw!, exported as SVG and imported in TinkerCad. Eventually redrew all…

Downloads
79
Likes
21
Rating
5
P
PrintablesModel Magic

The Walking Dead - Merle Dixon

The Walking Dead - Merle Dixon

Downloads
78
Likes
13
Rating
0
P
Printablessn0w

Omnifixo with Gridfinity!

Hello, This is my plate for Omnifixo, where you can storage yours other Gridfinity bins on top while working, like Soldering Tin, Solder Iron or other! It's 2x5 Grid on top. For Soldering Tin and Solder Iron holder check out my other…

Downloads
78
Likes
37
Rating
0
P
PrintablesDocWeebl

Bosch IXO Bit Holder

An alternative nose cap for the Bosh IXO that allows easy storage and access to 8 screwdriver bits. I really find this little electric screwdriver useful, but wished it had some built in bit storage. This part replaces the detachable nose…

Downloads
73
Likes
18
Rating
5
P
PrintablesJoeSlowMo

Pinecil + Omnifixo Deluxe Travel Solder Kit

Stores and organizes: Pinecil soldering iron 6 Pinecil soldering tips (short Omnifixo third hand tool (held in place by magnets) PinePower 65w USBC power supply USB-C to USB-C power cord Solder in a tube Desoldering braid in a standard…

Downloads
73
Likes
42
Rating
0
P
PrintablesKutilman Yuri

Omnifixo case/box with storage space

I made a large version of the Omnifixo case because the original feels very fragile and removing magnets is kinda pain for me. It's nice to have a case where every part has it place and looks tidy, but I don't have the nerves to remove…

Downloads
71
Likes
19
Rating
5
P
Printablesalecharp

Omnifixo OF-M4 box / base (parametric)

This is a simple base / box to organize an Omnifixo OF-M4 plate and its 4 OF-C1 clamps. The model can be modified to accommodate different sizes of magnets and even the OF-S2 plate. The STL and GCode files are made to accept 8x3mm magnets…

Downloads
71
Likes
9
Rating
0
P
PrintablesWeevl

Twingo 4 E-Tech / New Spring / Pixo Console Set

A small set for the middle console of the Renault Twingo 4 E-Tech (2026), Dacia New Spring (2026) and the Nissan Pixo (2027). I designed and tested it with the Twingo but since the cars share the same base and the shops seem to sell the…

Downloads
70
Likes
8
Rating
0
P
Printablestheo

QUIXO game

Cool Game for two players, like Tic-Tac-Toe for Advanced by a company called “QUIXO” Instruction: Print the Cube 25 times for a completed game, I only found the german guide but if you want it in english you could just watch one of…

Downloads
70
Likes
11
Rating
0
P
PrintablesEnte

Bosch IXO Toolbox gen 7

Printed Bambu X1C mit AMS ESUN ABS+ Silber / Devil Design RED ABS+ 0,2 Standard Normaler Support wird benötigt, Baum (auto) wird nicht reichen es werden 6 M3*30 benotigt

Downloads
69
Likes
9
Rating
0
P
Printablesstere0

Nixon watch opener

Opener for the battery cover of a Nioxn Sentry watch.

Downloads
69
Likes
2
Rating
0
P
PrintablesPlasticXYZ

Holder for IXO (5th Gen) at KÜPPER pegboard

This is a very simple holder for the BOSCH IXO (5th Gen) at a KÜPPER pegboard. Printing Print in PETG with 0.4 mm nozzle @0.2 mm layer height no suppports needed Additionally needed material: two 4x12 mm woodscrews or chipboardscrews (I…

Downloads
69
Likes
9
Rating
5
P
PrintablesElis Hirwing

NixOS Linux beads / pearls for necklaces bracelets DIY jewelry

Printed with PLA and ironing on the top. 100% infill because it's so small so the walls will be 100% infill anyways.

Downloads
67
Likes
19
Rating
0
P
PrintablesHochram

Ixo drill bit holder for HSW

IXO drill bit holder for Honeycomb Storage Wall. Holds 8 bits Bosch IXO bits holders (67mm x 13mm)

Downloads
67
Likes
14
Rating
0
P
PrintablesMike Pensinger

Omnifixo Storage Box

I got the Omnifixo Helping Hands system and needed a box to store it. Most others also had storage for a soldering iron that i did not need. Uses 4 10x3 magnets Amazon.com: TRYMAG Small Refrigerator Magnets, 50Pcs Rare Earth Magnets,…

Downloads
66
Likes
18
Rating
5
P
Printablestecnoculebras

donquixote doflamingo one piece coasters v3

this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…

Downloads
64
Likes
9
Rating
0
P
PrintablesChristoph Caina

Bosch IXO Auxiliary Head Tool Holder - Wall Mount with holes

Remix of bowilab's Thing:1616985 Just added two holes into it. Category: 3D Printing

Downloads
61
Likes
9
Rating
0
P
PrintablesEccentrical

MHP50 Base for OmniFixo

The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…

Downloads
61
Likes
16
Rating
0
P
PrintablesArnold

Skadis Bosch Ixo Gen 6

This is designed to hold a Bosch Ixo Gen 6 on an IKEA Skadis storage plate. I have printed the part as oriented in the attached file which requires a big amount of support structure. Ideas how to minimize the support structure required…

Downloads
60
Likes
10
Rating
5
P
Printablesjehne

Asterix Magic Potion Gourd (Asterixova čutora) #Freecad

Asterix Magic Potion Gourd (Asterixova čutora)

Downloads
58
Likes
11
Rating
5
P
PrintablesSP9DEV

Omnifixo OF-M4 IKEA Skadis holder

Simple two-hook system for mounting your Omnifixo OF-M4 third hand set on IKEA SKADIS pegboard.

Downloads
57
Likes
19
Rating
4.5
P
Printablesunavailable

Dummy 13 Don Quixote Lance

limbus company 🔥🔥🔥 🗣 🗣 🗣 I made this lance using TinkerCAD, so that's why the text is going out of the lance instead of being indented inside.

Downloads
56
Likes
9
Rating
0
P
PrintablesFrixo

Fortress of Solitude, Frixo Version

Hello, I made this version of the Fortress of Solitude from Superman comic, I hope you enjoy. When I made this I print the first layers with green glow in the dark filament, then I switch to transparent and I start filling the inner…

Downloads
54
Likes
6
Rating
5
P
Printablestheo

QUIXO (Spiel)

Dieses TicTacToe für Fortgeschrittene benögt folgende Einstellungen: 20% Infill 0.2mm Schichthöhe Zum Drucken: 25x Würfel 1x Brett VIEL SPAß

Downloads
53
Likes
8
Rating
0
P
Printablesthefuckwhatever

B&M Ixon Rock Gopro Mount

This mount replaces the lower mount on the Ixon Rock and allows the hanging installation to a Gopro mount. The slots on the sides allow good visibility for checking the current battery charge status. Print with high infill (>60%) and…

Downloads
53
Likes
1
Rating
0
P

Remix of the Ultimate Omnifixo Pinecil Travel Case

I just mixed up Tylers brilliant model to accept 10x6mm (or two 10x3mm) magnets instead of ball bearings. It was just easier for me because i was having a problem finding just a couple of ball bearings (who wants to buy 50, right?). All…

Downloads
53
Likes
10
Rating
0