Search results: jaw

Sort order

1,178 models

P
PrintablesSneaks

Bench Mountable 4-Jaw / 3-Jaw / 2-Jaw Vise with Swappable Jaws - 100% Printable!

Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…

Downloads
51,811
Likes
22,458
Rating
4.82
P
PrintablesGage

Human skull, anatomically correct - Re-Cut + snap-on jaw

An easy to print human skull cut into pieces that require minimal supports. If you print with snug supports on the build plate only then only a little of the underside of the nasal structure gets 'stringy' (above the roof of the mouth). I…

Downloads
21,276
Likes
6,726
Rating
4.97

FlexiDinos Tessa the flexi T-Rex print in place articulated dinosaur with hinged jaw

There is a new and improved 2026 version available here , or included for my club members . Yes, I know it's blasphemy as we already have the awesome mother of all flexi dinosaurs, the original Flexi Rex from DrLex . But in order to…

Downloads
11,942
Likes
1,492
Rating
4.92
P
PrintablesCraig

T-Rex Skull With Full Jaw

*Update. Watermarked the Skull photos to annoy lazy Etsy scammers. *Update. Added the stand and support rod from the original file I remixed. Adjusted the mesh to replace the clipped portions of the original. This is most evident on the…

Downloads
8,092
Likes
1,129
Rating
4.95
P
PrintablesGabgra11

Glamrock Freddy Wearable Mask with Hinged Jaw

This is a modified version of Official_Dino55's Glamrock Freddy Head model. I added a hinge for the jaw and widened the neck hole to make the model wearable. The hinges only require two skateboard bearings. Rubber bands can be added to…

Downloads
7,586
Likes
1,142
Rating
4.86
P
Printablesmdkendall

2.5inch Three Jaw Chuck

A 2.5inch (63mm) diameter three-jaw chuck. The three self-centering jaws are reversible to allow holding larger work pieces. To fit them in the normal orientation, as shown in the photos, insert them in to the slots in the order A-B-C. To…

Downloads
5,452
Likes
554
Rating
4.89
P
PrintablesGrogg3D

Benchy Wreck at Sea - JAWS Edition

A Benchy lost at sea! This time we can blame JAWS . Pesky shark! The crew was rescued thankfully by another Benchy. I'd suggest using blue filament for the sea and then whatever you'd like for the broken hull. I used dark grey. I did not…

Downloads
3,822
Likes
980
Rating
4.91
P
Printablesmochr

Jawa 50/21 Pionyr

Legendary moped Jawa 50/21 Pionyr from Czechoslovakia 1967-1978. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift! https://www.buymeacoffee.com/mochr

Downloads
3,490
Likes
838
Rating
4.93
P
PrintablesMatt Boyer

Broom Hanger w/ flexible jaws

Push your broom between the jaws and it will stay. Printed w/ Filaflex40 and PLA. The flex part came out kind of stringy, but a quick torch clean up of the business side, and it looks great. I left the string on the back to assist in the…

Downloads
3,277
Likes
1,814
Rating
4.76
P
PrintablesGloomeskk

Thunderjaw from Horizon Zero Dawn

The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.

Downloads
2,922
Likes
1,086
Rating
5
P
PrintablesQualith

Gloomhaven Jaws of the Lion organizer insert

A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…

Downloads
2,384
Likes
374
Rating
5
P
Printablesmochr

Jawa 500 OHV - Rumpál 1:10

Jawa 500 OHV – Rumpál, byl první motocykl značky JAWA. Motocykl byl vyvinut německou firmou Wanderer (model K 500), poté byly odkoupeny práva p. Janečkem, a tím vznikla značka JAWA – JA neček – WA nderer. Motocykl měl čtyřdobý, vzduchem…

Downloads
2,201
Likes
469
Rating
5
P
PrintablesVuLcAiN
18+

The source marked this model as adult content.

Downloads
1,987
Likes
1,239
Rating
4.83
P
Printablesmochr

Jawa 50/23 Mustang

Legendary moped Jawa 50/23 Mustang from Czechoslovakia 1969-1982. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift!

Downloads
1,660
Likes
330
Rating
5
P
PrintablesHildi3D

Jawa - Star Wars - No Support

No support Jawa from Star Wars. Colored 3mf included.

Downloads
1,659
Likes
445
Rating
4.89
P
Printableskizla

Great White Shark Jaws

I think this is a beautiful scan put out by the Auckland Museum, I just wanted to try and make it more printable and the edges and delicate jaw cartilage strong enough, was fun trying to get it to work with remeshing and other trial and…

Downloads
1,349
Likes
119
Rating
4.71
P
Printablesbuho29

3 jaw chuck

test 3 jaw chuck this model possibly needed a bit of lime/file(ajustement) Category: Machine Tools

Downloads
1,253
Likes
161
Rating
5
P
PrintablesPulp

Gloomhaven: Jaws of the Lion Boardgame Box Inserts

This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…

Downloads
1,166
Likes
206
Rating
5
P
PrintablesDragonArtist15

T-rex Skull mask with moving jaw

Remix of https://www.thingiverse.com/thing:4742896 and https://www.thingiverse.com/thing:308335 File comes sliced due to model complexity and size. Full version also provided. I have added in pegs and holes for easier assembly. File is…

Downloads
1,084
Likes
322
Rating
5
P
PrintablesEDGeProjects

Anatomically correct HINGED Skull and Jaw

Anatomically correct HINGED Skull and Jaw because you and I both know you're going to make this thing talk like a puppet. Three stl's are here. 1 - hingedSkullAndJaw are meant to print in one piece. Untested but SHOULD work. If it doesnt…

Downloads
1,080
Likes
212
Rating
5
P
PrintablesPapaBravo

Rack & Pinion Robotic Gripper Jaw

Servo Controlled Robotic Gripper using rack & pinion drive for parallel jaw movement https://youtu.be/Qfd0ikdnAsg This is a robotic gripper/jaw that uses a low-cost Tower Pro MG996R servo. As opposed to some grippers that use a lever…

Downloads
1,015
Likes
35
Rating
5
P
PrintablesH- printed

mandible anatomic-jaw

mandible anatomic -lower human jaw

Downloads
969
Likes
46
Rating
5
P
Printablesnewhouse24

Jaws Shark

I remixed the design to make it larger. I edited the shark so the bottom fins didn't get in the way of placement into the base. I also made a Jaws label. This was a request from a kid :) I was able to print the water without supports. The…

Downloads
914
Likes
99
Rating
5
P
Printablesmochr

Jawa 250

Model of Czech motorbike Jawa 250 (cca 1960). It's semiscale, it's not perfect shapes as original. movable wheels and steering . For spoke use 0,6mm steel wire and montage in pripravek_kolo.stl. some M2x6 screw fot complete and CA glue.…

Downloads
898
Likes
153
Rating
4
P
Printablesdanowall

Jaw iPad stand

Model of a human jaw. Also works as an iPad stand. Print instructions Category: Tablet Summary Model of a human jaw. Also works as an iPad stand.

Downloads
869
Likes
140
Rating
4.88
P
PrintablesDT

Customizable Vise Soft Jaws (fully parametric!)

After playing around with the customizable vise soft jaws here I realized that I wanted a few changes. I also wanted to get a better handle on OpenSCAD and between those two things I decided to write my own parameteric vise jaws. This…

Downloads
844
Likes
118
Rating
5
P
PrintablesMiguel M.

5 inch vice soft jaws

These are vise soft jaws designed 5 inch vise There are 4 recesses in the back for 8x3mm magnets. You could use it without magnets or just the 2 on the front face but 4 holds it really nicely to the vise. I used C.A. glue to hold them in…

Downloads
837
Likes
178
Rating
5
P
PrintablesGizmo Goody

Parametric xTool RA2 Rotary (Magnetic and Non-Magnetic) Chuck Jaws and Pegs

Motivation The xTool RA2 rotary is a great accessory, but the included chuck jaws have a few shortcomings: Workpieces with shallow stepped inside geometry (lip) are difficult to get a good and even grip especially when tapered Outside…

Downloads
818
Likes
97
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.1 - FRAME

Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…

Downloads
797
Likes
173
Rating
5
P
PrintablesLoboCNC

Reconfigurable Multi-jaw Vise

This multi-jaw vise consists of a base plate and 3 or 4 rack & worm jaw units. Pins in the bottom of each rack slip into keyhole slots in the base for quick reconfiguration. Each jaw slides onto grooves in the rack, trapping a worm/knob…

Downloads
791
Likes
493
Rating
4.8
P
PrintablesEviosdelam

Elegoo Centauri Carbon Glass Cover and 5 Build Plate Holder with No Logo (Stainless Steel Jaws Version)

Used the excellent stainless steels jaw version and added support for 5 bed plates instead of 3.

Downloads
788
Likes
96
Rating
5
P
PrintablesVirtuallyJason

Gloomhaven: Jaws of the Lion Palisades

My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…

Downloads
763
Likes
87
Rating
5
P
PrintablesGLeZz

Yet Another Fully 3D Printable Mini Vice With Interchangeable Jaws.

I needed mini vice mainly for holding small PCBs while soldering but did not like existing ones for different reasons so as usual for me I designed my version. I made it with interchangeable jaws in mind so you can print them in…

Downloads
757
Likes
130
Rating
4.89
P
PrintablesEDGeProjects

Anatomically correct human skull lower jaw remix

Anatomically correct human skull lower jaw remix which joins both the top and bottom. The original which is by Peter from Belgium has the jaw split into two sections. I took the upper and lower jaw sections from his model, merged them and…

Downloads
757
Likes
74
Rating
5
P
PrintablesThiago Devita

Trap Jaw

The concept of the central idea was by the artist Kevin sharpe, but I made some changes and took other ideas from other arts! Hope you like it !

Downloads
751
Likes
51
Rating
5
P
PrintablesMoritz Schmitz

Vise Grip - C-Shaped Jaws

This model features a vise grip with adjustable C-shaped jaws. The C-shaped jaws allow it to grip parts or profiles with an edge which would be difficult to grap with normal vise grips. The model has various joints, a flexible spring…

Downloads
717
Likes
275
Rating
4.83
P
PrintablesCuberia

Articulated Chameleon, jaw is printed on the body

The jaw is printed on the body so you don't have to stick it on anymore

Downloads
694
Likes
52
Rating
4.83
P
PrintablesHov3Dskou

Laser Rotary Jaws V2.1

2023 NEW.: Added threaded hole at the tips to mount m4 setscrews, to hold rings etc for fiber engravers. Do you own a 80mm chuck-style rotary for your laser-engraver machine? Then you need these special designed jaws for grapping big…

Downloads
682
Likes
59
Rating
0
P
PrintablesAlvomane

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Downloads
655
Likes
126
Rating
4.25
P
PrintablesMichael Doe

Jawa 50 (1/18, 1/12, 1/7)

Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Hi guys, this is the model of beautiful and legendary czechoslovakian 50cc moped, it's easy to print and it comes in multiple scales. This "bike" maybe isn't very…

Downloads
651
Likes
92
Rating
5
P
PrintablesDROO

Soft TPU Vise Jaws

vice jaws yup that's it! tpu 20% infill is good, two files one wth little holes one without.

Downloads
650
Likes
198
Rating
5
P
PrintablesMikeSam

Midi Lathe Jaw Holder

I made these jaw holders to wall mount my midi lathe jaw sets. There are 4 mounting holes for #8 wood screws. There are two different versions, only the support depth differs between the two. I included pdf drawings files with some key…

Downloads
632
Likes
87
Rating
4.71
P
PrintablesvernSL

Gloomhaven: Jaws of the Lion Dashboard

Gloomhaven: Jaws of the Lion Dashboard

Downloads
606
Likes
79
Rating
5
P
PrintablesLL77

Hand Push/pump drill with stronger replaceable jaws

Remix of Hand Push/pump drill with stronger replaceable jaws, the lower part was too weak new one is stronger

Downloads
591
Likes
75
Rating
4.3
P
PrintablesBMan

3 Jaw Drill Chuck 1/4 Inch

This chuck is based on an old patent drawing for a Jacobs chuck. The chuck can hold bits up to 1/4 inch. When assembling the chuck, the jaws must be inserted in the correct order. The parts have dot symbols on them to help you assemble…

Downloads
590
Likes
56
Rating
4.5
P
PrintablesPeter Farell

Jawa Sandcrawler with Interior

Star Wars Sandcrawler. Updated 1/14/2026 Amazing Sketchfab model by tegnemaskin Fixed for 3d Printing. Added overall .4mm No UV details needed.

Downloads
564
Likes
134
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.2 - ENGINE CRANCKCASE + ENGINE COVERS

Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…

Downloads
547
Likes
49
Rating
5
P
PrintablesSchaffer.la

Bench Vise with Desk Clamp (XL) Now with soft Jaws

I needed a bigger vise on my desk. Couldn't find one so I made this. printed in PET-G except for the pads (TPU). The vise and clamp are separate files as they are quite large. No support was needed for any parts. The jaw is designed to be…

Downloads
505
Likes
175
Rating
4.67
P
PrintablesMarwyn

Parallel jaw pliers (sturdy) - MRW

FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…

Downloads
492
Likes
78
Rating
4.93
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank

Here you are the 5th part of my Jawa-ČZ 250/353.02 build. Hope the 4th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com The 5h part consist a big…

Downloads
482
Likes
57
Rating
0
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.10 - LAST ONE :)

Finally I bring you the last part of my built. After this part you will have a complete 3D model of the SOLO bike. Of course, if you also want to own a sidecar or a winter fairing, you need to continue to persevere in the construction…

Downloads
480
Likes
85
Rating
0
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.7 - Wheels

Here you are the 7th part of my Jawa-ČZ 250/353.02 build. Hope the 6th part was fun for you :) https://www.printables.com/cs/model/802455-project-jawa-cz-kyvacka-25035302-part-no6-rear-mud As usual the model part consist a big parts but…

Downloads
477
Likes
53
Rating
0
P
Printablesrmfms

Dan Moi Jaw Harp

The Vietnamese jaw harp is known for its unique sound and shape, this 3D design is the result of dozens of iterations to achieve the most easy-to-play, loud, and tuned Vietnamese jaw harp possible to me. Tuning The tuning of the printed…

Downloads
474
Likes
25
Rating
5
P
PrintablesART TOO

VICE JAWS - Magnetic - Parametric

Vice jaw protectors - Grip Magnets: 5x3 STEP files included to make adjustments

Downloads
470
Likes
248
Rating
5
P
Printablesthall72

Lego Compatible (98057.dat) Dinosaur Jaw Lower Tyrannosaurus Rex

This model is compatible with the lego system.

Downloads
469
Likes
70
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat

Hope the 7th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.7 - Wheels od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay…

Downloads
467
Likes
58
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.9 - SIDE BOXES + FOOTRESTS

Hope the 8th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…

Downloads
460
Likes
68
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 - dumpers

Here you are the 4th part of my Jawa-ČZ 250/353.02 build. Hope the 3rd part was fun for you :) https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo The 4th sequel is quite comprehensive, so pay…

Downloads
458
Likes
41
Rating
0
P
PrintablesSmashD

Gloomhaven JOTL Player Dashboard (Jaws of the Lion, Pranken des Löwen, Split)

I am fairly new to JOTL, but I liked UnclePats player dashboard so much (lightweight, easily fits into the games box (even two of them like in my case), easily to understand but still versatile layout, ...) so much that I tried to improve…

Downloads
457
Likes
63
Rating
5
P
PrintablesDiablo

Jaws Orca Benchy

Description PDF If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback…

Downloads
455
Likes
158
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.3 - front fork holder with covers

Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…

Downloads
454
Likes
37
Rating
5
P
PrintablesHexitex

Four Jaw Self Centring Chuck

The design is based on the Longworth Chuck, it's a great movement and normally used for Woodturning. The chuck's original designer sadly died after showing the design at a club meeting. The late Mr. Longworth of the Hunter Valley…

Downloads
451
Likes
62
Rating
5
P
Printablesjawarmaniak

Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.6 - Rear mudguard

Here you are the 6th part of my Jawa-ČZ 250/353.02 build. Hope the 5th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com…

Downloads
448
Likes
46
Rating
0

Jawa 500FL 1:10 by Ed van der Heijden

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s 3 bolts m2 x 20mm 2bolts m2 x 6mm With the cooperation of @mochr, I have given the Jawa 500FL…

Downloads
445
Likes
90
Rating
0
P
PrintablesVirtuallyJason

Gloomhaven: Jaws of the Lion Chaos Demon

Here's my proxy model for the Gloomhaven: Jaws of the Lion Chaos Demon! This model was a lot of fun to make and a lot of work! In the end, it's a crazy chaotic mess of spikes and tentacles... so I'm pretty happy with the result =) I…

Downloads
436
Likes
36
Rating
5
P
PrintablesD - Model

Keychain | Jawa

Print settings: Rafts: No Supports: No Resolution: 0.20 / 0.16 / 0.12 / 0.10 mm Infill: 100% Notes: Printed with 0.4mm nozzle, resolution 0.16mm on Ender 3 I had to change the color of the filament during the print i slowed down the print…

Downloads
434
Likes
40
Rating
5
P
PrintablesVirtuallyJason

Gloomhaven: Jaws of the Lion Zealot

Here's my take on the Zealot enemy from Gloomhaven: Jaws of the Lion! I'm actually pleasantly surprised by how this model turned out, as I was concerned that the pose was a bit boring, but now that I can see it in person, it's actually…

Downloads
431
Likes
44
Rating
5
P
Printablesbstolk

Knipex pliers wrench jaw protectors (250mm)

Slide-on jaw protectors for the excellent Knipex 250mm wrench pliers. According to Sergey, also works on 180mm pliers when scaled at 86%. Although there are already some 3D-print models around, this was mainly a small project for myself:…

Downloads
427
Likes
62
Rating
5
P
Printableswerz 99

Knipex Jaw Protectors

Jaw Protectors for Knipex 86 XX 250 and 86 xx 150. Print in TPU or PETG or even PLA. A little more flexible material may last longer. Update 29.3.2024: Added Fusion360 drawing on users request. Print Settings Printer Brand: Prusa Printer:…

Downloads
416
Likes
74
Rating
4.8
P
Printableswerz 99

Softjaws for Lathe 3-Jaw-Cuck

Softjaws for my HBM 250x550 Norton Profi Lathe with 125mm Sanou 3-Jaw-Chuck K11-125.

Downloads
415
Likes
93
Rating
5
P
PrintablesFairweatherFool

Gloomhaven Jaws of the Lion Blood Tumor

Amalgamation of two models I found: https://www.thingiverse.com/thing:4203530 and https://www.thingiverse.com/thing:4006077 To form a "Blood Tumor" boss monster mini for Gloomhaven JotL. All the credit goes to the original artists…

Downloads
402
Likes
24
Rating
0
P
Printablescmh

Vice jaws for bicycle maintenance

Remix of the original design by aiber. I narrowed the pads down so they would consume less plastic to print, made the text markings larger so they'd show up better when printed, and added three holes to each to fix 8x3mm rare earth…

Downloads
398
Likes
135
Rating
5
P
Printablesluma

Soft Jaws for Knipex 180mm Pliers Wrench 86-XX-180

Print in PETG or TPU, the jaws are printed face-down so the gripping surface can match your print bed (use smooth bed for smooth jaws, textured for texture, etc). Geometry was 3D scanned from the tool for precise fit, this should easily…

Downloads
398
Likes
52
Rating
5
P
PrintablesSpinodal_Zeugma

Jaws of the Lion: Three Barrel Stack

This is a three-barrel stack for the Jaws of the Lion board game. The .STL file is a remix of Robagon's single barrel. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.4 mm Infill: 20%…

Downloads
394
Likes
34
Rating
5
P
PrintablesJulien Mairy

Cover, Bed Holder and Stainless Steel Jaws for Elegoo Centauri Carbon

Added support for Stainless Steel Jaws on the right part (the one placed at the front) and made a slight design modification to avoid a sharp edge on the side. This is an addition to this model:…

Downloads
385
Likes
81
Rating
5
P
Printables3DMason

Flexi Jaw Hammerhead Shark

This is a cool design by https://www.thingiverse.com/squareanimals/designs Thanks to its clever mechanism, the jaw opens when you press the middle dorsal fin – perfect as a toy, desk companion, fidget gadget, or a fun collectible. The…

Downloads
385
Likes
75
Rating
5
P
PrintablesValhalalala

Starting Hexes for Gloomhaven, Jaws of the Lion, The Crimson Scales, and Frosthaven.

I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…

Downloads
384
Likes
51
Rating
0
P
PrintablesRainer

Knipex Cobra 300 Schonbacken jaw protectors

Schonbacken für die Knipex Cobra 300 Rohrzange. Am besten in TPU drucken.

Downloads
376
Likes
64
Rating
5
P
PrintablesJacker

Knipex Cobra soft jaws

as the original STL contains both sides but they not on the same level, I cut it in half to allow single prints as multiple objects are nasty when printing TPU. I added a TOP marker on the TOP part, as they are not interchangebale but…

Downloads
374
Likes
61
Rating
4.8
P
Printablesworkshopbob

Vice soft jaws

A set of magnetic soft jaws for a 4" vice (103mm) There are 2 version, one plain and another with V grooves Print instructions Printed in PETG at a layer height of 0.2mm at 50% fill. It could be printed in PLA. Magnets are 10mm x 2.75mm…

Downloads
368
Likes
72
Rating
5
P
PrintablesB20bob

Fully printed Desk Vice with flexible jaws and pin jaws

Vice: Full disclosure, I did not design the vice. It was an existing design by TheGoofy on Thingiverse. He has a whole bunch of awesome designs and I highly recommend you check them out. That being said I used it to base my jaw designs…

Downloads
361
Likes
104
Rating
4.75
P
PrintablesVirtuallyJason

Gloomhaven Jaws of the Lion: First of the Order

Here's my proxy model for the Gloomhaven: Jaws of the Lion enemy, the First of the Order! Since this is an older human with a big sword, I figure that it'd work quite well as a D&D figurine, especially if you're looking for some sort of…

Downloads
357
Likes
32
Rating
5
P
PrintablesReitangle

Ratcheting crimping plier + spare jaw (IWISS SN) holder for IKEA SKADIS / UPPSPEL

Crimping plier holder for IKEA SKADIS pegboards specifically tailored to fit the IWISS SN-2549 ratcheting crimping pliers. Two versions are included: Plier holder with three slots to hold spare/different crimping jaws. One of the slots is…

Downloads
356
Likes
59
Rating
4.88
P
PrintablesEDGeProjects

Aliens xenomorph inner jaw custom 2 sizes

Aliens xenomorph inner jaw custom 2 sizes. The 140mm is shorter so it looks like the inner jaw is retracted in the xeno's mouth. The other is the full length but also customized. In the photos, my version is the white PLA and the gray one…

Downloads
342
Likes
51
Rating
0
P
PrintablesBilliam

Magnetic vice soft jaws (customizable)

Add your wise jaw width and height, number of (round) magnets, their diameter and height. Dimensions do not include print tolerances, so size up jaw and magnet dimensions before printing as much as you need to. If using the angled groove,…

Downloads
337
Likes
39
Rating
5
P
PrintablesChris

Soft Jaws for 4 inch Bench Vice

A pair of soft jaws for the Record No. 3 (4 inch) bench vice, designed to protect work-pieces that would be easily marked by bare metal jaws. Material / Printing Printed in eSUN ABS using multi-line infill for strength - see the screen…

Downloads
336
Likes
142
Rating
5
P
PrintablesRagnarok

Jawa pionýr (krytka spojkového lanka)

Model jsem tiskl na výšku a bez podpěr. z Pteg

Downloads
335
Likes
27
Rating
5
P
PrintablesMartin Rigatoni

Jaw Harp (Bamboo-style)

This is how this 3D printed instrument sounds. Ok, to be fair. It does not sound good. The fact that I don't know how to play it does not help either. But it makes funny “boing” noises, so I'm happy with it. Print it with PLA, it has a…

Downloads
332
Likes
42
Rating
4.4
P
Printablesk.makesstuff

Sunglasses for Oakley Jawbone lenses

I made these glasses since I couldn't work up the nerve to buy real Oakley sunglasses so I figured the next best thing was to buy a pair of replacement lenses and then make a 3D printed frame. They work well and they are a great…

Downloads
329
Likes
36
Rating
0
P
Printablesmmackowiak

Knipex Jaw Protectors/Covers with Clips

Original design had very nice fit, but when printed with rigid material (ABS in my case), jaw protectors/covers were detaching very easily. I added retaining clips to both pieces, so they stay in place. Fits 150 mm Knipex pliers (86 XX…

Downloads
326
Likes
54
Rating
5
P
PrintablesVirtuallyJason

Gloomhaven: Jaws of the Lion Blood Imps

Here's my proxy model for the Gloomhaven: Jaws of the Lion monster, the Blood Imp! There are 10 of these guys in the box, so I figured that a few different poses would add some nice variety to the table. These guys are pretty delicate and…

Downloads
323
Likes
41
Rating
5
P
PrintablesKevin Levy

Jaw Covers for 4 inch bench vice by Harbor Freight Central Forge

Snap in jaw covers for the Harbor Freight Central Forge 4" bench vice. Protective your work without the metal jaws marring the surface of plastic or other soft work materials. Comes in several variants with either large grooves, a…

Downloads
323
Likes
69
Rating
5
P
PrintablesOryhara

Spring Clip flat jaw and needlenose

Im making my own helping hands for a solder station, needed a clip. This one has sufficient clamping force, but the teeth weren't well suited to small parts. Hence flat and then needlenose version. Print instructions Category: Tool…

Downloads
320
Likes
24
Rating
4.71
P
PrintablesJH3D

XTool Rotary RA2 Jaw (XTool RA2 Spannbacken)

Ich habe verschiedene Arten an Spannbacken für das Rotary RA2 von XTool. Durch die unterschiedlichen Spannbacken kann ich unterschiedliche Teile besser Spannen. Nr. Höhe Spannteil Gesamtlänge 1 7 mm 39 mm 2 8 mm 29 mm 3 20 mm 29 mm 4 7 mm…

Downloads
320
Likes
47
Rating
5
P
PrintablesElliot Knight

Print in place big jaw mini vise

print in place small vise with bigger jaws, the bigger vise (pictured) with the tall jaws is upscaled 160%.

Downloads
319
Likes
61
Rating
5
P
PrintablesWahcuda

MTB Suspension vise jaws

MTB Suspension vise jaws with magnetic attachment (12x3mm magnet). 0.5mm removed from each clamping face to allow for a good squeeze. 130mm length Set 1 - 31.6mm 30.9mm 10mm 34.9mm Set 2 - 27.2mm 7.5mm 28.6mm 25.4mm 10mm Set 3 - 25mm…

Downloads
316
Likes
68
Rating
5
P
Printablesvidision

Human Skull - Jaw Delete

These are support intensive.

Downloads
314
Likes
42
Rating
5
P
PrintablesVirtuallyJason

Gloomhaven Jaws of the Lion: Rat Monstrosity

Here's my proxy model for the Gloomhaven: Jaws of the Lion monster, the Rat Monstrosity! This could probably serve as a decent Dire Rat for a D&D game, so double duty! This one needs a bit of support at the head, and I'd recommend some to…

Downloads
314
Likes
33
Rating
5
P
PrintablesSpinodal_Zeugma

Jaws of the Lion: Bread Crate

Scenario 20 of the Gloomhaven: Jaws of the Lion board game features a number of produce crates that must be collected. I thought it would be fun to have a variety of crates to collect. I have remixed the Wooden Apple Crate by MiniPress,…

Downloads
314
Likes
33
Rating
5
P
PrintablesMartin Jörg

Boat "Orca" from the Movie Jaws

Dieses Modell ist im Massstab 1:? und ist ideal für Resin Druck

Downloads
309
Likes
20
Rating
0