Search results: jif

Sort order

263 models

P
Printablessascha

Fujifilm X-E4 hot shoe thumb grip

This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length

Downloads
455
Likes
28
Rating
5
P
PrintablesMadEdd

Lens adapter Pentax K to Fujifilm X

WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…

Downloads
387
Likes
27
Rating
0
P
PrintablesSix

Fujifilm X-Mount to 1.25" Telescope Adapter

This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece. Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so…

Downloads
215
Likes
21
Rating
0
P
Printablesdoroteo

Fujifilm X-E4 Grip

The handle design is similar to the one of the originl grip, but 3mm taller. I decided to shorten the bottom part (see image #5) and remove the Arca Swiss geometry. The screw used was the typical one for camara accesories. I removed the…

Downloads
164
Likes
27
Rating
5
P
PrintablesCalarok

Fujifilm Instax Mini - Wall photo picture frame

Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…

Downloads
158
Likes
50
Rating
0
P
PrintablesCDaemon

Fujifilm X-E4 Grip + battery/SD card door access

A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…

Downloads
57
Likes
9
Rating
5
P
PrintablesPhilo_fo

Lens cap for FUJIFILM X-Half Camera (X-HF1)

I printed it using two color metallic PLA filament and the octagram spiral pattern on the top and bottom. You can obtain the printing setup form the gcode (for Prusa XL) below. The result looks quite good, and given the minimal effort…

Downloads
19
Likes
3
Rating
0
P
PrintablesDylanRyanDesign

Stand for Instax Polaroid Fujifilm Photos

Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…

Downloads
2,244
Likes
492
Rating
4.96
P
PrintablesPrintile

Disposable Camera Lens Adapter for Fujifilm (Updated)

Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…

Downloads
1,136
Likes
156
Rating
5
P
PrintablesTheCenda

Fujifilm X hotshoe cover

Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.

Downloads
1,095
Likes
105
Rating
5
P
Printableseli

X Mount rear lens cap Fujifilm XF

Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.

Downloads
860
Likes
59
Rating
5
P
PrintablesHans64

Thumb grip for Fujifilm X100 series

I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.

Downloads
847
Likes
64
Rating
4.5
P
PrintablesMakerDAD

Fujifilm Instax Mini Triple Photo Frame

This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Downloads
795
Likes
155
Rating
5
P
PrintablesRT3D

Fujifilm Instax Mini Photo Frame Stand

I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…

Downloads
780
Likes
111
Rating
4.88
P
PrintablesMakerDAD

Fujifilm Instax Square Photo Frame

I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor

Downloads
643
Likes
114
Rating
5
P
Printablesmetalsepp

Fujifilm HotShoe-Cover

Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.

Downloads
601
Likes
66
Rating
5
P
PrintablesArk

Fujifilm X Mount Body Cap

Model of Fujifilm X Mount Body Cap, needed a body cap, measured dimensions from existing body cap. First design and it fits without additional changes :) Needs to be printed with Supports due to the bayonet mount. Position on build plate…

Downloads
593
Likes
36
Rating
5
P
PrintablesBjörn

Yet Another Fujifilm X100v Thumbgrip

I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…

Downloads
561
Likes
73
Rating
4.89
P
PrintablesChen Felix

LEICA style lens hood for fujifilm XF23 XF35 f2

LEICA style lens hood for fujifilm XF23 f2

Downloads
515
Likes
61
Rating
5
P
PrintablesNeilR

Fuji (Fujifilm) X-T20 grip, works on X-T10, X-T30 too!

The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…

Downloads
504
Likes
44
Rating
4
P
PrintablesKosut_Ondrej

Fujifilm NP-W126, NP-W126S Battery case

Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…

Downloads
494
Likes
42
Rating
5
P
PrintablesTony MaHoney

Fujifilm X-Series Battery Case

**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.

Downloads
458
Likes
82
Rating
4.75
P
PrintablesTheCenda

Thumbgrip for Fujifilm X-T20/X-T10/X-T30

Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.

Downloads
453
Likes
45
Rating
4.75
P
Printablesh19x51

Fujifilm X-Pro/X-T Series Thumb Grip

Reverse engineered JJC TA-XPRO3 grip, not the exact same dimensions but very similar. If someone needs a more FDM friendly version, just write me.

Downloads
450
Likes
38
Rating
5
P
Printablesfabiankirchen

Disposable Camera Lens Adapter for Fujifilm X-Mount

I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…

Downloads
429
Likes
51
Rating
5
P
PrintablesMarcin Szyszki

Fujifilm GFX Lens Cap

Lens cap for fujifilm G (GFX) system based on the original cap. No supports needed. I use PETG with 0.4 nozzle 0.2 layer but PLA should also works. I also printed this on resin printer and also fits great.

Downloads
392
Likes
25
Rating
5
P
PrintablesMakerDAD

Fujifilm Instax Wide Photo Frame

Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.

Downloads
385
Likes
47
Rating
5
P
PrintablesDonii

Fujifilm X-T Series Eyepiece

Eyepiece or Eyecup that fits Fujifilm X-T4 X-T3 X-T2 X-T1 XT4 XT3 XT2 XT1 X-H1 XH1 GFX100 GFX 50S Models. I made this design for my Fujifilm X-T1 but it should fit all the models listed above. It was printed with a 0.1 layer height on a…

Downloads
384
Likes
30
Rating
4.67
P
PrintablesChen Felix

FUJIFILM 35mm f1.4 lens hood

FUJIFILM 35mm f1.4 lens hood

Downloads
382
Likes
41
Rating
0
P
PrintablesAksium

M42 to Fujifilm X mount Thin Adapter for Projector Lenses

Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…

Downloads
361
Likes
27
Rating
0
P
Printablesaplyard

Fujifilm X-T20 thumb grip

I don't know if it works with other models. Will probably need some sanding after printing in order to fit. Can also be printed in other materials. The one you see in the photo is -sanded with 180 and 400 grit -primed -sprayed black

Downloads
353
Likes
20
Rating
3.6
P
PrintablesIgoreveech

Canon EF to Fujifilm X adapter

Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…

Downloads
339
Likes
32
Rating
5
P
Printablesyukosteel

Fuji X ultra-compact lens rear cap for Fujinon Fujifilm FX mount

Ultra-compact 9mm tall rear lens cap for Fujinon X mount lenses. Standard Fujinon cap is 13.5mm tall, I like more compact Voigtlander cap design for Fuji X lenses. At some point I realized that most Fuji X lenses I have do not protrude…

Downloads
334
Likes
15
Rating
4
P
PrintablesSunoc

Thumb grip for Fujifilm X100V

Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.

Downloads
322
Likes
30
Rating
3.75
P
PrintablesSenseiShrimp

Fujifilm 35mm F2 WR Lens Hood and Cap

Square style lens hood and cap for the Fujifilm 35mm F2 WR lens. Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. The model can be printed without the use of…

Downloads
302
Likes
29
Rating
5
P
Printablesatvguy585

New Version Jiffy Pots / Pots for Modular Hydroponic Tower

I had issues with the original/ jiffy pot being weak. I dropped one and it broke around the longer slits. The stronger vs I linked here also was great but used way to much material. It definitely didn't break easy. **** Pictures show the…

Downloads
283
Likes
22
Rating
5
P
Printablesitsleon

Fujifilm Instax mini Film / pic box V2

A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit

Downloads
268
Likes
99
Rating
5
P
PrintablesNeilR

Grip for Fuji Fujifilm X-T3 XT3, includes Arca-Swiss mount

The Fuji X-T3 is a great little camera, but lacks an Arca-Swiss mounting plate. Also, the grip is a tad small, would benefit from a bit more beef. This newly designed grip provides both features, yet doesn't block access to any of the…

Downloads
261
Likes
24
Rating
5
P
PrintablesAxField

Fujifilm X-Series Battery Case for NP-W235

This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…

Downloads
243
Likes
23
Rating
5
P
Printablessfa

Fujifilm XF 27mm Squarehood

This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…

Downloads
236
Likes
21
Rating
5
P
PrintablesKazi Toad

Fujifilm NP-W126 battery holder

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…

Downloads
228
Likes
35
Rating
5
P
Printablesmaxelman

FUJIFILM Lens Hood for XF23mmF2 and XF35mmF2 R WR Lenses

You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…

Downloads
220
Likes
19
Rating
5
P
PrintablesWgLabs

FUJIFILM XM5 HANDGRIP

my own designed fujifilm xm5 handgrip, you can use ¼" for the 3 thread inserts

Downloads
217
Likes
7
Rating
0
P
Printablesw.wolf90

Fujifilm X-T20 (X-T10) Thumb Grip Rubber

I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…

Downloads
210
Likes
14
Rating
4
P
PrintablesChen Felix

XPAN style hood for Fujifilm XF23 XF35 f2

We recommend you to print with PLA/ABS/Nylon

Downloads
210
Likes
25
Rating
5
P
Printablesmetalsepp

Fujifilm NP-W235 Akku Cover

Protective cover for the Fujifilm battery NP-W235, the battery for the X-T4

Downloads
210
Likes
21
Rating
4.6
P
Printablesplocnik

Flat and long Fujifilm NP-W126S battery holder

A holder that fits flatter pockets. Inspired by a model by Thingiverse user netsrac, but laid out differently, made to hold three batteries.

Downloads
196
Likes
20
Rating
5
P
Printablesdergogo

Fujifilm X-E2 thumb grip

Designed this thumb grip for the Fujifilm X-E2 to sit in the hot shoe and forms around the wheel on the top. Printed upside down with some supports

Downloads
196
Likes
17
Rating
5
P
PrintablesNeilR

Fuji (Fujifilm) Lens Hood for 16-80 Zoom (FUJINON XF16-80mmF4 R OIS WR)

The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…

Downloads
188
Likes
12
Rating
0
P
Printablesmichelluccote

Two Piece Jiffy Plant Holder for Modular Hydroponic Tower

This is a replacement for the plant holder included in the Modular Hydroponic Tower Garden by boundary condition. Some reviews indicate it is difficult to get the plants out and the holders should not be printed since it waists too much…

Downloads
185
Likes
33
Rating
4.67
P
PrintablesJimpelom

Fujifilm NP-W126 Battery Case

Awesome Fujifilm NP-W126 Battery Case with lock and simple ejection. The designer aIso incorporated a feature to use the battery orange tab as an indicator wether the batteries are charged or not. If you don't mind about this, the case…

Downloads
180
Likes
15
Rating
0
P
PrintablesDrKriegerAUS

Parametric Jiffy Box

I needed a simple custom shaped ‘jiffy box’ style enclosure. So I made a parametric model. Overall dimensions as well as thickness can be adjusted. Corner radius has a small amount of adjustment. Design is for M3 button head screws.…

Downloads
165
Likes
14
Rating
0
P
PrintablesDr.Peter

JIF Mop holder

This is a holder for a JIF mop. Print laying down

Downloads
162
Likes
19
Rating
5
P
PrintablesVec4

Fujifilm Instax Mini/SQ/Wide Film Carry Case

Prints in place without supports. Fits around 25 films.

Downloads
159
Likes
24
Rating
5
P
PrintablesFunFunBoy

Fujifilm X-E3 Thumb rest

A thumb rest for Fujifilm X-E3. Category: Camera

Downloads
158
Likes
7
Rating
5
P
PrintablesChrosta

Jiffy Garden

The 3D model of the flower pot consists of two parts: a container and an insert. The container serves as the base of the entire flower pot and also functions as a water tank. The insert, which is placed into the container, has 18 circular…

Downloads
152
Likes
32
Rating
5
P
Printablesxol_

FujiFilm QuickSnap Lens for Micro Four Thirds

Summary --- This is a 3D printable body for the plastic lens element from a FujiFilm QuickSnap disposable underwater camera. The Fuji website claims this to be a 32mm lens, which comes to 64mm equivalent on M4/3, from what I understand. I…

Downloads
151
Likes
22
Rating
5

FUJIFILM X10 MOD (LEICA RETRO STYLE) V2

MORE INFORMATION : https://leonardoramazzotti.github.io/leonardo_ramazzotti_links/fuji.html <div class="article">

Downloads
140
Likes
18
Rating
0
P
Printablesyukosteel

49mm filter adapter ring for Fujifilm X100V X100F X100T X100S X100 camera

UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…

Downloads
140
Likes
19
Rating
0
P
Printablesuuild

Fujifilm X Mount DIY Lens - Fujica Camera Donor

This lens is in no way intended to blow your mind, it produces sub par photos, the focus can't be adjusted and the sharpness is lacking. This project is more of a test to play with the limitations. What I really want to do with the…

Downloads
137
Likes
34
Rating
5
P
PrintablesBam

18mm Pinhole lens Fujifilm / X-Mount - UNTESTED

Untested - 18mm pinhole lens for fuji x-mount

Downloads
135
Likes
13
Rating
5
P
PrintablesNeumo

Fujifilm X-T3 Battery Holder (Multiple sizes)

I wanted to keep the whole thing as slim a possible so it could be stored in a narrow pocket in a bag. For some numbers there are two versions (Type A and B) that have the battery cells oriented differently. Choose whichever best suits…

Downloads
129
Likes
16
Rating
5
P
PrintablesWilliam Ward

Willie G Harley Davidson Jiffy stand coaster , blank and a couple others

Wanted a new Jiffy stand coaster if you want different styles let me know, I welcome new ideas.

Downloads
128
Likes
25
Rating
0
P
Printablesalexcocan

Fujifilm Instax mini 11 shutter button cap

I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…

Downloads
125
Likes
7
Rating
0
P
PrintablesTait Brown

Fujifilm X100S Lens Cap

After misplacing my own lens cap I designed a snap-fit lens cap. I looked at various sites and there were caps with people's personal brands, caps with no logo, caps with the logo as text. I wanted the actual Fujifilm logo, so here we…

Downloads
123
Likes
7
Rating
5
P
PrintablesNeilR

Fuji (Fujifilm) X-H2 XH2 X-H2S XH2S Base Plate with Arca-Swiss Adapter

The Fuji X-H2 and H2S are great cameras. This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc. In case you DO want to use a…

Downloads
122
Likes
11
Rating
5
P
PrintablesGreg Shortland

Fujifilm X-T10/20/30 Grip

Print with no supports, upright. The original creator designed a custom support to avoid the Cura calculated ones, it just snaps off with some long nose pliers. I used a 60mm/s print speed on my Ender 3 Pro, and the Standard Quality…

Downloads
119
Likes
5
Rating
0
P
PrintablesFredrik

Lens Holder / Organizer - FujiFilm, Nikon, Canon, Sony etc.

My camera gear was loosely stored in a drawer - to organise and enable easy access I created these “pucks”/holders to store my lenses. Each lens has its own “puck”, but the tags are printed separately and can be easily swapped (unless you…

Downloads
116
Likes
26
Rating
0
P
PrintablesDavid_liao

Fujifilm NP-W126 NPW126 battery case

Very useful battery case,remix by: http://www.thingiverse.com/thing:852737 Modify item: 1.Add hole on bottom of the case,you can take batteries out easily 2.Modify the case size,may can fit more equivalent batteries Category: Camera

Downloads
116
Likes
9
Rating
0
P
PrintablestheXorios

Instax Fujifilm frame for Ikea SKÅDIS

Small simple frame that is compatible with Ikea Skadis system. Photo dimensions: 86*54 mm. Available in both directions.

Downloads
115
Likes
32
Rating
0
P
PrintablesSuperWilli

Fujifilm NP-W126s battery case rugged box

Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…

Downloads
113
Likes
24
Rating
4.67
P
PrintablesTony GRILO

Fujifilm NP-W235 battery box / Boite pour Fujifilm NP-W235

A battery case for the fujifilm NP-W235 Une boite pour les batterie fujifilm NP-W235

Downloads
113
Likes
6
Rating
0
P
PrintablesGreg Shortland

Fujifilm x Mount Dispo Lens

Inspired by the Dispo Lenses you can find on places like Etsy, and looking a new hobby, this was my gateway into 3D printing. This helped me to start learning how to 3D model in Fusion 360, and to use and calibrate the Ender 3 Pro I got…

Downloads
112
Likes
13
Rating
0
P
Printablesryandam

Fujifilm X-E5 Thumbgrip

Minimalist thumbgrip for Fujifilm X-E5

Downloads
111
Likes
2
Rating
0
P
Printableseightbit

Fujifilm X-T4 NP-W235 Dual Battery Carrier

This is a battery carrier/organizer to mimic the one I used for the older style Fuji batteries. Since I couldn't find any existing models, I thought I'd give it a crack myself. I originally intended for a 3 battery carrier, but since…

Downloads
109
Likes
7
Rating
0
P
PrintablesMaxx

Fujifilm battery case V2 - NP-W126

Made a second version of the original Fujifilm battery case. This one has the latch on the back of the case instead of the side. The latch is wider and stronger. The only support you need is for the lip of the latch. 100% infil 4…

Downloads
108
Likes
11
Rating
4.5
P
PrintablesZ3us

Fujifilm XT5 Handgrip

Printed with PetG

Downloads
107
Likes
15
Rating
0
P
PrintablesSteamroller17

Fujifilm Instax SQ1 Button Cover

The Fujifilm Instax SQ1 button is far too easy to press. This little cover just helps prevent those accidental shots by reassessing the button. With my printer tolerances, the clip is a slight press fit over the lanyard eyelet, which…

Downloads
106
Likes
12
Rating
4
P
PrintablesRuslan

Fujifilm battery case (double) - NP-W126

Holds 2 Fuji batteries in slim case.

Downloads
106
Likes
8
Rating
4
P
PrintablesEvanRLD

Fujifilm Battery cover for NP-W235

I designed it to protect my Fujifilm NP-235 batteries, these aren't cheap so i prefer not to throw them with exposed connectors. I couldnt find any model with decent lock mecanism, so here it is. Fits the XT4, XT5, XH2 and XH2s batteries…

Downloads
104
Likes
4
Rating
5
P
PrintablesNeumo

Fujifilm X Telescope Adapter

This model allows you to attach any camera with a Fujifilm X series lens connector to a 1.25" telescope. The telescope side and camera side are separated for easier printing and attached together by M3x8 screws. There are three versions…

Downloads
104
Likes
31
Rating
5
P
PrintablesManelTo

lens cap for Fujifilm x100

it is best to print with flexible filament

Downloads
103
Likes
6
Rating
5
P
PrintablesDJ

Jiffy Stand Coaster with Harley-Davidson Logo - Seitenständer Unterlage Anti-Rutsch - MMU Versions

This is the MMU version of my Jiffy Stand Coaster ( https://www.printables.com/de/model/167215-harley-davidson-jiffy-stand-coaster-seitenstander- ) for different Harleys. If you can't find your bike, give me a PM. I have also attached the…

Downloads
103
Likes
23
Rating
0
P
PrintablesMaxx

Fujifilm battery case - NP-W126

Wasn't comfortable carrying batteries with exposed connections in my pocket so i made this. I printed mine with PLA and ASA on Prusa Mini. They both work. I don't know how long the latch will last but it's a simple and fast print so it is…

Downloads
102
Likes
9
Rating
0
P
Printablesyogeshp98

FujiFilm x100V - xpro-3 style case

The xpro-3 has a hidden screen and the idea of hiding my screen to be more in the moment of what i'm shooting. Fujifilm didn't announce the xpro-4 so here's my next best alternative. I was inspired to design this when I saw a seller on…

Downloads
102
Likes
11
Rating
0
P
PrintablesAndreas

Fujifilm Instax wide Film pic box

A Box for films and instantpics for Fujifilm Wide.

Downloads
100
Likes
31
Rating
0
P
Printablesbenlikethecolor

Fujifilm NP-W235 Battery Gridfinity Holder

I couldn't find a version of this anywhere else online, so I thought I'd make one! This is a 1x1 holder designed for gridfinity. The battery just fits in that size, but the walls are a little small on the sides. From my testing this…

Downloads
100
Likes
10
Rating
5
P
Printablesthenickdude

Fujifilm X Lens Mount

This is a printable model of the mount found on Fujifilm X lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height in ABS (recommended), PLA, or PETG. For ABS I had to set my…

Downloads
98
Likes
17
Rating
5
P
Printablesroybijster

Fujifilm NP-W126S battery cover

A simple battery cover for the Fujifilm NP-W126S batteries with a small battery state window. Place the cover on the battery such that the orange circle on the battery shows through the window to indicate a charged battery. Place it the…

Downloads
98
Likes
15
Rating
5
P

Fujifilm X-T5 Bottom Plate

Bottom plate for Fujifilm X-T5, compatible with Arca-style clamps. Threaded version has ¼-20 threads included in the print. Non-threaded version has a plain hole sized for a ¼-20 tap. Gcode is for the non-threaded version in Prusament…

Downloads
98
Likes
17
Rating
0
P
Printablesappallingdonut7

Fujifilm GFX Front Body Cap

Front cap for Fuji medium format camera bodies

Downloads
96
Likes
4
Rating
0
P
PrintablesArctic3Design

Lenscap (Fujifilm Mini Evo) (TPU)

Simple lenscap with knurling to match the design language of the camera. Made to be printed in TPU. The model does have quite tight tolerances, but the friction fit is perfect printed on my Prusa MK3 with “Fiberlogy TPU Fiber 40D". If…

Downloads
94
Likes
15
Rating
5
P
PrintablesKazi Toad

Fujifilm 27mm lens cap

These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a lens cap specifically designed for the Fujifilm…

Downloads
93
Likes
8
Rating
5
P
PrintablesJenno

Fujifilm Battery Charger Case

Case for Fujifilm battery charger, cable and 2 spare batteries. This my first successful print in place hinge design. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Filament: Prusa…

Downloads
91
Likes
26
Rating
0
P
PrintablesSicc Sikk Nasty

Gridfinity Polaroid/Instax/Fujifilm Holder (Instant Camera Picture)

This holder will hold multiple pictures if need be! Infill of 10/15%, 2 walls, 0.2mm

Downloads
85
Likes
11
Rating
5
P
PrintablesGreg LFT

Fujifilm X-E5 handgrip

Fujifilm X-E5 Grip Better grip feeling and better stability. Supports needed for the bottom screw hole.

Downloads
84
Likes
3
Rating
5
P
PrintablesThomas Mayr

Fujifilm Lens Stand

Only works with original Lens bottom caps. Shape is slightly conical and was adapted to fit them perfectly. Printed on Prusa Mini+ with PLA

Downloads
83
Likes
18
Rating
0
P
Printablesminjaep

Fujifilm X-H2 / X-H2S battery grip connector cover

I lost the battery grip connector cover for my X-H2S while traveling. The only replacement I could find was the cover set sold by Fujifilm, which costs $20. As I think I will lose it many times, I decided to model it. If you wish, you…

Downloads
81
Likes
1
Rating
0
P
PrintablesArucious

Fujifilm X100VI Gridfinity Shadowbox 4Lx2Wx6H

Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…

Downloads
77
Likes
4
Rating
0