Counting matching models…
The leg design is modular, so you can make it the same, higher or longer. The length is simply driven by how many times you print the extension part. Original length requires printing leg_extension part twice (the gcode matches the…
Plastic latch for Keter Store it out plastic shed Tried to mould it to look like the one which was originally but a bit stronger. This is direct replacement and you can use original hardware to fix it. Printing: I printed it in PETG-PRO…
PLA 15% infill no supports needed on MK4
Four of these fit nicely on the top of a Keter rolling toolbox, and can be used as a parts tray, bin etc. This version is 40mm deep. See my other model for an 18mm version that sits more flush on top of the toolbox. I printed in PLA with…
My brother asked me to redesign a broken Hinge Lock for a Keter Box Outdoor Storage Container. It was actually one single part that had partly rubbered plastic to act as kind of a hinge. This part was broken. There is no official…
Section dividers for Keter Pro Cantilever Organizer to separate contents of the smaller (top level) removable bins Original The original version is a simple sliding divider to help separate the contents of a bin. Full Bin Insert…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
Printed in PETG with 50 % infill. The modell is printed upside with supports.
Personnellement j'ai imprimé avec les paramètres suivants: filament: PLA pas de supports épaisseur de couche: 0.20
Tools or pencils holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution:…
KETER CONNECT case container 240051
Keter Plastic Cabinet Shelf Support Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: Generic PLA Black Category: Replacement Parts
Print the right way up with a brim or raft if needed, but it printed okay for me with just a skirt.
because the space is not never enough I made storage box for Keter workbench to storage some parts when you working on your projects. boxes are removable. to complete I used super glue, M5 nuts and M5x12 (DIN934). nuts I preheated and…
Gridfinity Base for Keter tool drawer, split to left and right for smaller printers.
Four of these fit nicely on the top of a Keter rolling toolbox, and can be used as a parts tray, bin etc. This version is 18mm deep. See my other model for a 40mm version that is deeper for storage of larger parts. I printed in PLA with…
Made with Tinkercad. Edit it online https://www.tinkercad.com/things/9jZOBXB3CLi Made for Keter APEX 8x6. It replaces the original latch and fits both at the top and bottom on the inside of the door.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
The Keter Tool Box has a latch which is comprised of an latch and an additional eccentric part. This is the model of the eccentric part. For the latch see https://www.printables.com/de/model/164679-latch-for-keter-tool-box. For maximum…
A hook that slots into the top of a Keter toolbox. Short and long versions. Print upside down (model is already orientated this way) with a grid support, 100% infill for best results.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
This is Part CO for a Keter Factor Shed. I recommend printing the part upside down, using tree supports. The Fusion3D (.f3d) file is attached for those that wish to modify the file. Category: Outdoor & Garden
These insert tray dividers were designed specifically for the Keter Connect Cantilever Clear Organizer . The design follows the look of the original compartments, so the inserts blend seamlessly and feel like an original part of the…
Garden set bolt replacement with elongated shaft Due to problem that i had i found this: https://www.printables.com/model/746324-keter-alibert-plastic-chair-bolts-replacement-spar But those bolts were not long enough so i was unable to…
The keter outdoor storage boxes are really handy things. The do however only come with 2 wheels, for 1 side of the box, so if you want to move it on the wheels, you would need to do so using a designated side. However, print 2 of these…
This is a replacement for broken or lost Keter/Kis Moby (outdor) Recycling Bin clip that should hold garbage bags attached to metal rods, created because I was not able to find such item in vendor's assortment. It should fit on 7mm…
Cutter holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill:…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
Print the right way up (round posts down) with supports, which are ony needed for the round posts.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
Replacement foot (part W1) for a Keter Unity XL Outdoor Prep Station. Broke in a storm and they wanted $44 to send a replacement part. Designed and printed this in PETG for less than $3. Used supports for the flanges at the top, threads…
Post it and pen holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution:…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
for these picks https://amzn.to/3NrcvTb maybe need to sanding a litle bit the rubber handle on the bottom part some of them need some of them not. just use a sand paper. need to drill holes in the box.
The KETER clamp lever. It works, but we'll see how long it lasts.
Boxes for Keter Connect system. Unfortunately, there's an extra ridge for the first row in the Keter case so these does not fit there easily. But you can use them for the 2nd and 3rd row. This was used for this product:…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
Insert to fit Keter and Neo drawer bins I used PTU but PLA and PETG are also possible
Caliper holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print Settings Printer: Longer LK4 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
Longer LK4 Pro Allen wrenches holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
these are replacement bins for the Keter 24in. Sliding Tool Chest
Fits perfectly the Keter Sigma series shelves. Bough 4 sets and didn't want the 5th shelf so I made a 5th set of shelves, but was missing the feet. These aren't the most optimized thinness wise and in general a very amateur model made in…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
2 large + 2 small Screwdrivers holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Printer: Longer LK4 Pro…
Contour adapted to the shape of the Keter organizer. Baseplate divided into two parts (left and right). Both parts connected together form a 10x5 section area.
for these screwdrivers for rc use them for valves and small screws on cnc machines use them on daily basis, heavy duty design need to drill holes in the box https://amzn.to/46hqZxt very good quality tool
Print with support, oriented with hooks flat on bed. Would recommend PETG for UV resistance and to prevent softening in the sun. Split in two with dovetail join to fit on standard Prusa printbed. Recommend a drop of CA glue on the joint…
Bin dividers for keter trunks. Corrected dimensions and added wall slope.
Print upside down (standing upright).
A pair of clips that slot into the grooves in the side of a Keter toolbox drawer, for convenient storage of a 15cm (6 in), 0.4mm thick rule that would otherwise be buried under other tools and difficult to get to. Recommend printing…
For best results, print upside down (hooks down, round posts up) with supports. There is an updated version here that is a better fit and an easier print.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Printer: Longer LK4 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20…
Fits perfectly the Keter Sigma series shelves. Bough 4 sets and didn't want the 5th shelf so I made a 5th set of shelves, but was missing the caps. These aren't the most optimized thinness wise and in general a very amateur model made in…
Uses an M5 Screw that sockets into the top and Self-Threads into the bottom.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
english below Hatte diese Kissenbox bestellt, bei einer Halterung hat aber das Spritzgussverfahren versagt. Also eine nachkonstruiert und Rabatt von Amazon abkassiert :D Ich empfehle mindestens PETG oder vielleicht sogar ASA/ABS, da es in…
I got a Keter workbench. Because I work in an environment where it is often difficult to find a level base, I came up with height-adjustable legs for the table. I printed the outer part from ABS, the inner part from PLA. For the final…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
A small holder for two usb keys. Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill:…
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ yellow…
Notebook (Asus k501u) power supply holder for Keter Pegboard Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Printer: Longer LK4…
Bought two used shelf units with one set missing the top cap. The pictures show the original on the left and the new one on the right. The shelf sizes are 18 x 36 and 24 x 36. They both look alike but only one set has Keter on the end…
Die Kühlbox ist leider nur 52cm hoch, man muss sich immer ein wenig bücken. Beinverlängerung damit die Box ca. 22cm höher ist
english below Ich dacht mir, dass sich der Boden von der Kissenbox bei etwas mehr Belastung schnell verformen könnte. also habe ich ein paar Stützfüße konstruiert, die stabil und ziemlich Luftdurchlässig sind, um dem Holz darunter Luft…
I made these Inserts for my Keter Toolboxes so i could put different screws in there and label them with a label maker I designed them with a 0.4mm Nozzle in mind and as low in weight as possible with only 10g of filament needed for one I…
Missed Part AB1 of our new KETER kitchen cabinet... Print Settings Printer Brand: Creality Printer: CR-20 Rafts: Yes Supports: Yes Infill: 100% Category: Household Supplies
Stickets (patch) Dispenser for 13mm round stickers
Print it with ABS. I tried PETG, but it broke almost instantly.
A simple, functional upgrade that adds a compact sliding container into the groove of the Keter folding work table. I use it to hold tools when I reload. It was designed in 2 parts - a block and container. I CA glued the 2 pieces together…
Shelf support for Keter shelves
The T- and X-Inserts will fit the Keter® CaddyXL organizers. I do not know if these inserts will fit the CaddyL organizers as well. The X-insert fits into one square space. For optimal stability, place a small piece of double-sided tape…
Latch for KETER Explorer Box 185L
Keter Pegboard clips 4mm hole
A quick clamp to hold a Keter shelf leg nice and level in a clamp to make cutting easy
Strong hook that can be attached to Keter Sigma 18".
Print 2 of each, use M5 bolts and nuts
an insert for more storage options for small items
What it is This is a curved roof-style cover that mounts on the side wall of an outdoor storage box (for example a Keter-style deck box that holds a pool pump and filter). It fits over an opening cut into the side of the box and projects…
This is a replacement for broken or lost Keter/Kis Moby (outdor) Recycling Bin slider mount (slider prevents lid from closing after it is open). I printed it with Sunlu PETG filament, 100% of infill to have some level of strength and…
## Overview Lost or snapped a plastic bolt while assembling or maintaining your Keter / Allibert outdoor furniture, sofa sets, or garden storage units? This replacement set includes both the heavy-duty plastic screw and its matching…
Print it with ABS. I tried PETG, but it broke almost instantly.
The T- and X-Inserts will fit the Keter® CaddyXL organizers. I do not know if these inserts will fit the CaddyL organizers as well. The X-insert fits into one square space. For optimal stability, place a small piece of double-sided tape…
A quick clamp to hold a Keter shelf leg nice and level in a clamp to make cutting easy
Print the right way up (round posts down) with supports, which are ony needed for the round posts.
For best results, print upside down (hooks down, round posts up) with supports. There is an updated version here that is a better fit and an easier print.
