Side Roof Cover for Pool Pump Hoses (Storage Box, Keter-style)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted roof cover that lets pool pump hoses exit the side of a storage box while keeping rain out.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
What it is
This is a curved roof-style cover that mounts on the side wall of an outdoor storage box (for example a Keter-style deck box that holds a pool pump and filter). It fits over an opening cut into the side of the box and projects outward, so the pump hoses can run out through the side while the sloped, curved shell sheds rain away from the opening. The underside is open, so one or more hoses pass through the cavity and exit at the lower edge. The flat base flange mounts flush against the outside of the box wall for a clean, stable fit. Overall size: 150 × 150 mm mounting flange, projecting 128.7 mm out from the wall at the deepest point. Internal hose channel is 100 mm wide with roughly 10 mm walls.
Print settings
Layer height: 0.2 mm (0.28 mm also fine for a faster print)
Infill: 15–20%
Supports: No
Material: PETG or ASA strongly recommended for UV and weather resistance; PLA only for shaded/temporary use
Orientation: print with the base flange flat on the plate, roof pointing up
Assembly / how to use
Cut or use an existing rectangular opening in the side wall of the storage box roughly matching the 100 mm inner channel.
Position the cover against the outside of the side wall so the base flange sits flush and the curved roof slopes downward, shedding water away from the opening.
Fix it in place using either (or both) of these methods:
Screws: drill holes through the flange into the box wall and screw it down.
Silicone: run a bead of outdoor silicone along the flange and glue it on.
I used both together — screwed it down and sealed the edges with silicone — which gives a solid, fully rain-tight mount.
Route the pool pump hose(s) through the cavity so they exit at the lower edge of the cover.