94 models
This is a mounting plate specifically for carrying a Kryptonite Keeper Mini-6 U-lock on a Mercier Nano Mini-Velo bicycle. This print works with (and requires) a 12" Voile nano-series strap to secure the lock. The plate installs using the…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Keep the Steel Man away from your tea party. What better way to insure that your party won't be interrupted by Superman? Just print a bunch of these and place them around your living room and surely you won't have any unexpected visits…
I didn't like the lock mount that came with my bike lock, so I designed and printed this one. You can use it too, as long as your water bottle mounting holes are ~2.5" apart and can fit through a 0.2" through hole. Also I wouldn't…
There are three unique parts, each of which must be printed twice: ULock cylinder holder (2x) maintains spacing between cylinder and rack. It is intended to be relatively loose, as it only holds the cylinder in place while attaching the…
Locker mount Designed for Kryptonite Keeper 12mm U-Lock ( Amazon ). It uses has a standard mount and should work for some other U-shaped lockers as well. Use Thinkercad source to modify the model for your locker. Bike mount Uses standard…
The Hook and Loop contest inspired me to solve a problem I've had for a long time, how do I mount my bike lock? This is a very popular lock, even recommended by the lock picking lawyer, so I was very surprised to find that there were zero…
Replaces the factory kryptonite New York standard U Lock holder for use on rack up to 12mm diameter. There are two models. One has a cutout to fit a racktime rack. The other has no cutout and can be mounted to continuous rack tubes at…
Kryptonite Evolution Mounting Bracket that fits onto the drink holder. Example bike is a Tenways CGO600. Printed in ASA on a sidewinder X1 with a 0.6mm nozzle.
This is a replacement hanger to attach a Kryptonite bike lock to your bike frame. This is a complete remake, but inspired by an original from Peite, with a few changes: Cleaned up and some fillets added for strength and smoother looks.…
Here is my original design for a Kryptonite (Long Shackle) U-Lock holder. It is skrewed to the bottle holder nuts in the bike frame. Print Settings: Use support (only touching build-plate) for the recess under the skrew holes... Infill: 33
N+1 bikes means N+1 locks N+1 locks means N+1 keys. Color code your Kryptonite keys! The fit is tight – scale the model if it’s too tight for you. Printed with 0.4mm nozzle at 0.2mm resolution.
Kryptonite arrow as seen in Arrow Season 6 Episode 8 "Crisis on Earth-X, Part 2" I'm thinking of making a mold and casting in translucent green resin How I Designed This All I did was smooth my trick arrow Category: Accessories
Make sure the slicer has the correct thickness and amount of layers for it to not squish t6e key off the buildplate.
Kryptonite U-locks often come with a two-part bracket designed to be strapped to a tube on the bike's frame. On a folding bike like mine, there isn't a good place to put the strap where it won't be in the way or slip down constantly, so…
Simple Holder for a Kryptonite M18-WL U-lock. Fits over a 16mm Pannier tube. 3x M6x30 Bolts & Nuts required. Printed in ASA.
Halterung Kryptonite 2130 Evolution Da sich die original Halterung ständig löste, und ich sie öfter wieder festziehen musste, habe ich eine eigene entworfen. Zudem muss ich das Schloss nicht mehr entriegeln, und kann es mit einer Hand aus…
*FOR PROP USE ONLY * Multi-color (No AMS Required) and regular versions available. Models are in print orientation. Scaled for mens small to medium hands so check measurements and adjust if necessary before printing. Kryptonite Batarang…
Metric bike mount for Kryptonite locks with 65mm spacing, M4 hardware, and optional rounded frame adapter. I redesigned this Kryptonite lock mount to use metric hardware, making it more accessible for those without imperial fasteners.…
Attaches a Kryptonite "New York Fahgettaboudit Mini" U-Lock to the handlebar stem of several city e-scooter models. This model is compatible with T9/T10 city-style scooters manufactured by a company called Titan/Unicool. That includes…
The dust cover fits perfectly on Kryptonite Evolution Series 4 chain locks. You can either print only the dust cover and keep the original slider (it does fit nicely on it) or you can print the dust cover slider. My slider was not broken…
Hi! Its spring season yay! So lets build something for our beloved bikes :D This Adapter lets you use The " Kryptonite" Bike Lock Mount with a " Fidlock MonkeyLink " Bottle Mount Magnet on your Bike. It is designed to fit the Magnetic…
After my first print in PLA of the original Kryptonite mount broke I decided to redesign the mount to be more sturdy. Since the failure happened along the layer lines at the height of the lower bar of the "U " I flipped the print…
This clip attaches a Kryptonite U-Lock to a typical rear rack for a bicycle. The openscad file has variables defined for tweaking sizing and spacing to match your setup. You'll want to print at least two of these for stability. Now…
This is a custom-designed mount to securely attach a Kryptonite Evolution Mini-7 U-lock to the frame of a KuKirin G2 Pro e-scooter. The basic idea is from here:…
I was so annoyed with my Kryptonite bike lock rattling so much when cycling. Printed these tightly fitted washers and it's a bliss. Simple PLA, but probably even better with some flexible filament. Adjust Z to fit your gap.
A lock mount fo the M365 scooter. Used M4 screws and nuts to secure in place. Category: Automotive
I made this Lock Mount for my new bike. The Lock ist held by friction. Didnt have any problems so far, even on rougher terrain. See the .3mf project file for print settings. I basically just did a lot perimeters. Also the print needs…
Locking your bike every day can get tedious, especially when you’re commuting and constantly locking in and out. There are plenty of mounting options out there, but I couldn’t find one that let me lock and unlock my bike in a blink. So I…
An upgraded, high-durability replacement shackle spline clip designed specifically for the Kryptonite Evolution Mini-5 U-lock. The stock aluminum spline connector is famously prone to loosening, causing the lock to vibrate loudly, rattle,…
Kryptonite lock adapter for a bicycle rack What is it? Adapter for Kryptonite bike lock to be mounted on a bicycle rack. For all lock types that has this FLEXFRAME-U Bracket. Like - New-U Evolution Why build it? Using provided attachment…
You will need 2 M3 screws to put tension against the back pannier rack. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Sport & Outdoors
I was having trouble finding a practical place to mount my Kryptonite lock on my bike frame with the original mount, so I decided to take advantage of the mount points brazed onto the headset tube on my bike. Edit (10/05/17): I added the…
You have to modify the lock. The turnable ring at the lock cylinder has to be shortened. Its easy with a metall saw. I used Prusament PC-blend without support.
These are hooks to attach any Kryptonite U-Lock to the basket holder of a bike. They can be fixed to the basket holder by using standard M5 screws and nuts (see pictures). The big hook is optional but provides better stability and…
It shook too much and it rattled too much. So a made these two additional adapters. I uploaded only the adapters. You need to download the original file from KDarling on Thingiverse. First adapter zu to make it fit to the 45 radius of my…
I've never been able to find a nice way to mount my bike lock to my frame, often having to put it in a backpack or balance it on the handle bars. This is a simple design that uses the drinks bottle mount to securely fasten it to the…
The Ninebot Max G3 comes with mounting points for a supplementary battery, but I decided that a better use for these is to hold my Kryptonite Evolution Mini-7 lock. Features (that differ from the original) Slit for the key to be left in…
You can use it too, as long as your water bottle mounting holes are ~2.5" apart and can fit through a 0.2" through hole. Also I wouldn't recommend using this design on an aluminum or carbon frame bike, because the water bottle mounting…
Motivation The U-lock mount that comes with the Kryptonite kit isn't very secure – it works best with round tubes, which the Aventon Level.2 doesn't really have. Therefore, I created this instead, for which you can scavenge parts from the…
Color code your U-Lock Keys and never mix them up again! I use multiple Kryptonite U-Locks for my bike. It's always a hassle to lock and unlock each of them by finding the matching key for each lock. With these key covers, you can…
Printed in TPU. The side with the silver frame mount might need to have the z height scaled down a little as is slightly smaller (at least in my one). Update: I scaled X & Y to 95% to get a tighter fit on the shackle, over time the tpu…
I greatly appreciate every like, download and make! Only print side A if you are planning to mount it to something flat. Print both sides and super glue together for prop use. Support : No Bed Adhesion : Brim recommended for sharp edges…
Simple little adapter for Kryptonite u-lock mounts. Unscrew your mount through where it rotates, drill the hole out to fit an M5 bottle cage bolt, and use this to ensure it stays in the proper orientation. Allows for the same 24 angles of…
Designed specifically to pair a Kryptonite 002130 lock with an Inmotion S1 scooter. May fit other locks if the shackle diameters are the same. This is my first original 3D printing model/project, designed and iterated haphazardly on…
This is a lock holder for the Kryptonite New Yorker u-lock to mount on a Lectric xp4 e-bike. The lock should be orientated with the locking mechanism towards the bottom of the frame near the release lever for the folding mechanism. Petg…
This mount allows to fix the kryptonite lock mount on a 28 mm diameter tube. Parts 2 screws : m4 x 35 mm 2 m4 washers 2 m4 nuts Printing Both models can be printed without supports : it will be necessary to re drill the holes to remove…
Tight fit, check the model dimensions before print! Printed with TPU 95A 0.16mm layer height 2 wall 0% infill 0.8mm solid layer on top and bottom Fits both ends of the U-shaped part
This mount is very specific to my seatpost but may be adapted or at least give ideas to design your own. For reference, this is the type of seatpost I am using here: Printed with ABS+, but I will probably reprint in ASA or PCTG next for…
Bottle cage adapter for kryptonite lock mount.
Slides over the aluminum rail protrusion of a Kryptonite lock and latches on it. I keep my lock in my bag so the rail isn't useful but damages the frame's paint when locked. I printed mine in PETG and they hold well. I don't know if PLA…
If you want to hang your kryptonite locks with the mounting point on the lock this should do it. Basic PLA at 20% infill is plenty strong enough. You can use an allen key on the locked mounting plate to rotate it to the side if you want…
Version 02: https://www.printables.com/model/1381303-kryptonite-series-2-holder-v02 Changes Stronger Smaller screws, M5 → M4 Draft for smoother “parking” --- Kryptonite locks have an included holder. Usually they come with a counter-part…
Enhanced version of the Kryptonite lock mount which adds a slot for 20mm velcro to secure the lock on bumpy roads. You need two M3 screws and nuts to keep the mount in place. It should fit any rack / rails with 10-12mm diameter, with some…
I couldn't find one that was the right size for the tube of my bicycle (32mm diameter), so I made one. This attaches with 4 M4 nuts and bolts, which will push-fit in. Print in PETG so it flexes a little bit. Orient it standing up…
I can't pick my Kryptonite lock with the factory Sparrows DD pick because it won't reach far enough past the spinner disc to tension the core. This is a replacement for the tensioner that'll allow you get deeper and more easily pick this…
batman vs superman toilet paper holder Category: Bathroom
Kryptonite U-Lock Dust Cover / Kryptonite U-Lock Abdeckung Deutsch Die Abdeckung ist für das Kryptonite Bügelschloss New York U-Lock M18-WL. Diese Abdeckung ersetzt die Originalabdeckung. Unter Umständen passt die Abdeckung auch auf…
I was thinking about how inconvenient it is to carry my U-Locks in a bag while biking, then I remembered that I have a 3D printer! This should work for any U-Locks with a 15.5 mm diameter on the “U” part of the lock. In order to properly…
Kryptonite New York Lock Pannier Mount For 10mm pannier rail and 18.5mm shackle 2 x 5mm zip ties needed per mount
These bushings ensures a snug fit between the lock cylinder and the rubber rings of the U. They also are designed to overlap the start of U plastic coating for looks and increase strength. Note: this bushing would not fit on the…
I printed it with PC carbon but everything will work.
This is a bracket to mount a Kryptonite Lock to an Axium Frontier rear rack. Uploaded stl's are orientated for what I feel is the best strength/printability position. You'll need: - the original Kryptonite mounting bracket. - 3 x m3 nuts…
The bracket that comes with the Kryptonite Keeper only fits a 35mm frame tube. I created this bushing to retrofit this to a 20mm tube. Printed on an Ender 3 Pro PLA 0.40mm Nozzle 0.20 mm Layer Height
Mine was worn and was making noise Printed in PETG 40% infil 2 perimeters
I made this mount my U-lock on the back of my bicycle where I have an Axiom Streamliner rack. This 2 piece holder fits over the rack and u-lock to hold it in place in the center of the bike when riding so the lock does not hang off one…
The plastic end of my bike lock key broke, so I designed a new one. Suitable for the Kryptonite New York keys, and perhaps some other similar ones Printed in PLA, 0.2mm layer height, 100% infill Designed for you to pause just before the…
Version 01: https://www.printables.com/model/1361631-kryptonite-series-2-holder-v01 Changes Stronger Smaller screws, M5 → M4 Draft for smoother “parking” --- Kryptonite locks have an included holder. Usually they come with a counter-part…
A replacement spacer I made for my Kryptonite Kryptolok Series 2. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: Yes Supports: Doesn't Matter Filament: WYZworks ABS Violet Category: Sport & Outdoors
The goal was to create some quick keyfobs so we can differentiate the keys for our growing collection of kryptonite locks. The fob goes with the key, and then we mark the lock with the same number using our cheapie Brother labelmaker.…
I took some inspiration of some bike locks that were made in the past and reused the original lock portion of the Kryptonite bike lock to create a clamping mount that connects to basically any standard tube bike frame. I use M4 bolts and…
The last story of the Silver Age Superman, "Whatever Happened to the Man of Tomorrow?", ended with Superman entering the Chamber housing a sample of Gold Kryptonite and disappearing in the Arctic. Gold K permanently removes a Kryptonian's…
This is a replacement strap I designed for my Kryptonite bike lock after the original rubber one broke. I replicated the geometry of the original, but the flexibility will depend on the filament and chosen thickness. In the photos you’ll…
I Love my Lock, but unfortunately I destroyed its sleeve. …So I have designed a new sleeve for my Kryptonite NEW U Lock and now I would like to share this design for download. Choose a nice color and easily print the case, I am looking…
Holder for Kryptonite lock on a VSETT 10 or IO Hawk Legacy with 3 little holes on the bottom for ability to attach additional taillights or similar things Print Settings Printer: Qidi X-Max Rafts: No Supports: No Resolution: 0.2 Infill:…
Mount for Kryptonite U-Lock New York M18-WL 10.3cm, which can be attached to bottle cage mount holes. It may look like the u-lock is hanging too low, but in fact it is not. And on this particular bike (Vässla Pedal) bringing the lock up…
This bike accessory is designed to mount a standard .5 inch d-lock to a bike. Mounts using zip ties. Consider supports.
This is a mount optimised for the following seatpost type: ###### Changes compared to V1: 1- Stronger backplate 2- Added new optional replaceable stabilizator to eliminate vibrations (works extremely well) 3- Nuts replaced with heat…
I made this to protect my kryptonite keeper U-lock from the rain and dust. Print it with TPU or TPE. No supports are needed.
This is a remix of @Macka_1067470 's Kryptonite 1090 Evolution Series 4 Chain Lock Bike Mount . I was looking for a solution to take keep my chain lock attached to my bike for easier access without needing a bag for it. The original model…
I've been using this for nearly 10 months now. Works great on my Lectric XP3.0. The OEM frame mount works only large seat posts and only if it can be mounted high enough. Print with TPU for best results and maximum compatibility between…
6.4 mm (centre to centre) spacing mount for Kryptonite Kryptolock. Print with many walls for strength and with supports. One handed operation is possible which is difficult with the original mount. Ensure your frame is strong enough to…
This new model introduces a partial reenforcing ring printed in a different direction to hopefully make this stronger. V2 broke after about 10 months of intensive use: V3 testing: Still printing this with Nylon PA. V3 uses the same…
Remixed to fit the Ninebot Max G3 handlebar with 42 mm diameter. Also it fits my Kryptonite Kryptolock Mini-7 perfectly. Fit around the bar is a bit tight.
Better cap for the Kryptonite Evolution Mini - The original one was too loose and was moving around.
Bike rattle reducing spacers for Kryptonite Kryptolok. By adding these rings before the rubber rings it reduces/removes the rattling sound the lock makes when frame mounted and biking.
Needed a better lock holder for evolution model that's longer than normal kryptonite models for my omnium cxc v4. Right now it's under the real-world test but it's seems so sturdy. I expect it to keep the lock fully stable in an…
The dust cover fits perfectly on Kryptonite New York U Lock. You can optionally print a TPU spacer which makes the slider less likely to fall out of place. Gluing it in place does the job Printed in Prusament PTEG.
This new model introduces a partial reenforcing ring printed in a different direction to hopefully make this stronger. V2 broke after about 10 months of intensive use: V3 testing: Still printing this with Nylon PA. V3 uses the same…
I was unhappy with the original mount system of my Kryptonite Mini-5 U-Slot. This replaces the aluminium slot on the shackle to insert the lock into its mount. The part is a first attempt to test for durability. I will report in a few…
A holder for a kryponite d lock that attaches to a bike pannier rack. Remixed by Jono H. Uses 3 m4x300m threaded rods , 6 m4x30mm bolts , 12 m4 nuts , and these mending plates . Print Settings Printer Brand: Creality Printer: Ender-3 S1…
I have a spare ABUS d-lock clamp for a bike and a spare Kryptonite d-lock. I wanted to be able to use the Kryptonite d-lock with the ABUS d-lock clamp but the bar size is slightly thicker for the kryptonite lock (13mm) compared to the…
This mount is very specific to my seatpost but may be adapted or at least give ideas to design your own. For reference, this is the type of seatpost I am using here: Printed with ABS+, but I will probably reprint in ASA or PCTG next for…
![Kryptonite lock mount V1 [Check V3 instead!]](https://media.printables.com/media/prints/515226/images/4172955_ecd098b5-d5e4-4f7f-aac6-0ecb25f6ec2b/img-0673.jpg)
