Kryptonite Evolution Mini-7 Lock Mount for KuKirin G2 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and sturdy mount to carry your Kryptonite Evolution Mini-7 U-lock on the stem of a KuKirin G2 Pro e-scooter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 53
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a custom-designed mount to securely attach a Kryptonite Evolution Mini-7 U-lock to the frame of a KuKirin G2 Pro e-scooter.
The basic idea is from here:
https://www.printables.com/model/742454-kryptonite-lock-mount-for-city-electric-scooters
The two-piece clamp design allows for easy installation without having to disassemble other parts of the scooter. It provides a snug fit to prevent rattling while riding. While designed specifically for the G2 Pro, it might also fit other scooters with a similarly shaped stem tube.
Hardware Needed:
- 4x M3 screws, thread length ~20mm
- 4x M3 hex nuts
- 8x M3 washer, outer diameter 7mm, thickness ~0,9mm
Printing:
- Material: I recommend using PETG, ASA, or ABS for better durability and UV resistance.
- Infill: 25-40% for good strength. I did 20% gyroid and added modifiers with 40% adaptive cubic infill in the screw areas.
- Walls/Perimeters: For high strength, use 4 to 5 walls (perimeters).
- Top/Bottom Layers: Use 4 to 5 solid layers for both the top and bottom.
- Layer Height: 0.12mm
- Supports: No
Assembly:
- Print the parts.
- Slide the washers in the slots near the hexagonal openings for the nuts.
- Press the M3 hex nuts into their dedicated slots on one half of the clamp.
- Position the two parts around the scooters stem.
- Insert the M3 screws with the washers and tighten them evenly until the mount is secure.
- Replace the bracket on the steel shackle with the sleeve.