KUMATY : Polar Bear Eating a Cookie
A polar bear is eating a favorite cookie. Print with supports. Enjoy!
- Downloads
- 426
- Likes
- 90
- Rating
- 5
169 models
A polar bear is eating a favorite cookie. Print with supports. Enjoy!
Kompaktní stojánek na 5 zkumavek do laminárního boxu.
Polar Bears are celebrating, "Happy Birthday"!! Added "Feliz Cumpleaños" (4/18/22)
-All models require no supports. -Balloons and Garland are printed separately. -Polar bears have a hole on their hands to put Balloons or Garland in. -All bears were painted with acrylic paint. -2 versions for all bears (with/without…
Made to print with no supports.
Pictures of the printed model will be uploaded soon. This model will need supports for printing.
Polar bears are into photography. Print with supports. Thanks:)
A polar bear is holding a flower bouquet!
A polar bear brought some flowers. No print supports needed. Enjoy!
Easter Bunnies!! Please use brims and supports accordingly.
It's winter! A polar bear is skiing.
Polar bears are sharing "Love". Bears can hold variety of swappable message boards. Enjoy:)
A polar bear is sewing something nice. No print supports needed. Add a brim for better adhesion. Enjoy! Special thanks to Sassi for this idea!
A polar bear just baked a cake for someone. Print with supports. Special thanks to Glacial for the idea! https://www.printables.com/social/198672-glacial/about
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The bears have come our for Halloween - collect the lot Support needed just for the very base of the pumpkin Why polar bears? Why not? If you havent…
A polar bear receives a gift from the South Pole. No print support needed for the original size. Enjoy:)
Polar bears are trying funny poses. You can print with minimal (or no) supports! Enjoy!
A polar bear is snowboarding!!
A polar bear is eating popcorn.
Polar bears are on a hike. "Because It's There." No print supports required:) Brim is recommended! Enjoy!
Polar bears are enjoying winter!! Print with supports. Thank you.
Updated for 2026:) Enjoy!
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The little bears are all grown up and graduated - collect the lot this is part one of the graduation collections Support needed for the bottom of the…
Polar Bears are having a snowball fight. No print supports needed. Please use brim if necessary. Enjoy:)
This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version. This should fit the Voron 2.4, 300mm by using the shorter front A and B skirts from the 250mm version. This took me about 6…
Polar bears will hold your smartphone. 3 sizes(thickness):9mm, 10.5mm, and 12mm No print supports needed. Thanks!
A polar bear holding hands with a little cub.
No print support needed.
Please use a brim to stabilize the print.
Little polar bears are preparing for winter. Some bears need print supports. Thank you:)
A polar bear is on a sled. Print with supports. Thank you;)
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears Supports needed for the bottom of the paint pallete only UPDATE 17/8/2022 - the wonderful Takman29 has helped fix an issue with the beret being thin…
Polar bears are on kayaks. it may need some print supports.
A Polar bear is ice skating.
-3 Models (Winter ver.). -May need brims for adhesion. -No supports necessary. -Easy to print!
A polar bear is ice fishing. No print supports needed.
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The bears have come our for Halloween - collect the lot Support needed for the corners of the sheet Why polar bears? Why not? If you havent printed…
3 poses. No print supports are needed.
3 polar bear poses. 1 skateboard (Flipped to print upside down) Need supports for "Skateboard Pushing" bear. Please use brims for polar bears if needed
Polar bears are pretending to be Maneki-neko (Beckoning Cat). Brings you luck:) https://en.wikipedia.org/wiki/Maneki-neko No print supports needed. Enjoy!
The idea of this model is given by one of fellow creators. Thank you very much!! You can print this without supports.
Rilakkuma relaxing on a cushion. This was just a quick remix to eliminate the need for supports, using https://www.tinkercad.com/things/aNY30yChtgT and https://www.tinkercad.com/things/g8JyAXm5GEP for the mattress and pillow. Related…
-3 designs. -May need brims for adhesion. -No supports necessary.
-May need brims for adhesion. -No supports necessary. Enjoy!:)
Includes printable blackboard:) No print supports needed.
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The bears have come our for Halloween - collect the lot Support needed just for the very base of the cape and the bottom of the basket Why polar…
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears This dude is chilling listening to his favourite beats No supports needed Why polar bears? Why not? If you havent printed these then get to it theres…
-May need brims for adhesion. -No supports necessary. Enjoy!;)
A polar bear will hold your SD/micro SD card. SD card x3 micro SD card x2 No print supports needed;)
-Need some supports for: -Chair (Polar bear) -Left hand (Polar bear) -Piano -"Piano" is easier printed upside down (for minimum support)
-May need brims for adhesion. -No supports necessary.
[Notes] -Cookies and icings can be printed separately or together. -Paint after or change filament color(Multi-material). -Used wood and white PLA filament.
Thought I'd help expand the band with this sax player. Supports needed for base of sax and arm.
Happy Kumaty holiday bear enjoying some hot cocoa. The other bear carrying the tree is thing:4646595 . Cocoa As an aside the only hot cocoa worth making is the original recipe using Dutch Process cocoa. You should do this while it prints.…
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears This guy is ready for ro come and perform at your next kids birthday party Support needed just for the very base of the cape and the bottom of the hat…
Print it backside down for a better result:) No print support needed.
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears The little bears are all grown up and graduated - collect the lot this is part two of the graduation collections No Supports needed Why polar bears?…
No print supports needed. Added separated version (bear and egg) for easier paint. Thanks for a request!
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears I made a student bear with a bigger apple than the one in KUMATY: Teaching Polar Bears…
No print supports needed. Enjoy!
-May need brims for adhesion. -No supports necessary. -Easy to print.
-3 Models. -May need brims for adhesion. -No supports necessary. -Easy to print!
-May need brims for adhesion. -No supports necessary. -Easy to print! -0.1-0.2mm layer height recommended for detailed bears' faces.
Happy Holidays! A polar bear made gifts for everyone.
A FDM print-friendly version of KFP Employee. I remix this model to be FDM printable by: Make the collar stick to the shirt. This will reduce the problem with collar broken off I make the hat part of the head I think I also stick the…
I just thought this was funny Category: Animals
SUP Pump Adapter for Reedin, Ensis & Takuma Wings Pump your wings with your standard SUP pump! This custom pump adapter allows you to inflate Reedin, Ensis, and Takuma wings using your existing standard SUP pump. No more carrying multiple…
This is my take of a remix of the wonderful work of Takman29 and his KUMATY polar bears This guy is ready for some crime fighting if ever anyone calls for help Support needed just for the very base of the cape Why polar bears? Why not? If…
We draw this “18” for the kumaty bears. This was a cute 18th birthday gift. The PolarBears Kumaty you can find here on printables, if you search for “Kumaty” / “Polar Bear”. Show us your Birthday-Bears 😍
Remix for multicolor printing. Just added color to the original models.
Stojan na 12 zkumavek s chilli. Model je rozdělen na tři části, které se vzájemně zašroubují. Při tisku nejsou potřeba podpěry. Stand for 12 tubes with chili. The model is divided into three parts that screw together. No supports are…
Official merch from “Akuma no Otto”! This was a prop I ended up putting together for a super last minute cosplay, but I liked how it came out. I took some creative liberties with some of the design aspects, but overall I think it’s fairly…
Based on the 1980s Manga make up the first series were a small part from the Japanese Kinkeshi line of gummy puppets from the manga/anime Kinnikuman This is a first volume of 10 characters I scanned in 3d a whole series I had at home A…
-May need brims for adhesion. -Support needed for the hats (back side) -Easy to print!
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 10 orange 15 white 26
Cute Bartholomew Kuma Figurine
Added a small loop for a string. Use it as a Christmas tree ornament, or cute bag trinket!
Harold & Kumar Go to White Castle - Harold (John Cho) & Kumar (Kal Penn) - 2004 3D printable model.
Posted by u/claybee27 on /r/Headsets/ I fixed the .stl and works perfectly!
Karavandaki kumanda karmaşasına son vermek ve aradığını bulmak için kumanda düzenleme kutuları
Added a small loop for a string. Use it as a Christmas tree ornament, or cute bag trinket!
This is the Okuma LB3000 lathe as an ornament. The design was created in Autodesk Inventor. You will need to scale up the STL.
Bring a bit of nostalgia with you wherever you go with this fun Rilakkuma Bear Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans and makers alike. Features 🎒 Back-to-School Ready – Add a touch of…
This is a fine Focuser based on a design from wal20. It uses two #6-32 screws to tension and lock on a piece of steel plate. Beneath the ring are a piece of felt to ensure a good lock down. Print instructions Printed on a Prusa Mk2,…
Command the Pride of the Imperial Guard Step into the tactical heart of the Alpha Quadrant with this 3D printed model of the Kumari, the legendary Andorian battle cruiser. Famous for being commanded by the brilliant and unpredictable…
Designed and tested with an ITIWIT (Decathlon's brand) pump and a Takuma Concept Tanji 6.1 wing.
If you need a lens cap to go on the front of your Takumar 75mm F/4.5 then this fits perfectly and tight. I designed to be simple and easy to print too. It fits tightly on the front but you can still take it off without too much pressure.…
I printed this with organic tree supports, it might be slightly hard to remove them from the mouth so better use some pliers.
Adding colors to models using PrusaSlicer 2.4RC1 is very easy! Not printed the model yet!
This hook is tailored to the geometry of this particular set of headphones, matching the cushion curve and width and fitting into the slot in the back. Since it also fits an older model from the same company, maybe they have some others…
bu model kuman maske ve miğferini içeriyor
Small sign for 2026. I also reduced the diameter of the shield's rods from 2.4 mm to 2.1 mm, as the original rods were too large for my Kuamtys. I added also two versions with 2.4mm diameter if in your KUMATY has bigger holes for the…
Držák zkumavek 3x10ks 15mm průměr do laboratoře
These blanks are modeled for the OKUMA L200-E. They are meant to cover tool slots of the turret when not in use to prevent chips from getting it. Final product was printed on Fortus 400mc in Poly-carbonate but any consumer printer should…