jujutsu kaisen Sukuna keychain
jujutsu kaisen Sukuna keychain single extruder multicolor ready
- Downloads
- 333
- Likes
- 33
- Rating
- 0
Counting matching models…
jujutsu kaisen Sukuna keychain single extruder multicolor ready
Just cutted the model and putted 3 plugs and holes for correct alignment when putting together :-)
This model is designed to be easy to print—no supports needed and fully compatible with standard PLA. I printed it on a Creality CR-10 300 using a 0.4 mm nozzle. Print settings were as follows: Nozzle temperature: 220 °C Bed temperature:…
The pack was meant for decorative purposes. All parts are interchangeable, insert core and glue it. Original upload date: 2023 Dec. 14 Updated Jan. 11, Core pieces.
------------------------------------- NEW AND UPDATED VERSION HERE: > Version 2 < ---------------------------------------- Kunai fidget spinner toy. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale…
Kunai fidget spinner toy V2. Fixed for better printing. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale by 0.4% (100.4) for PLA or whatever the shrinkage of your material is. Best printed with PETG…
Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…
Finger fits in hole and is able to spin around. Has "Watermark" to show it was made by me. Print Settings Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2mm Infill: 15% Notes: Tree or normal supports, doesn't matter. Category:…
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
This model can be printed in 1 part or 2 parts. 2 parts uses much less plastic because of no supports but it is a hassle to glue together. Enjoy! Cover Photo by @Roiku
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Original Part : https://www.thingiverse.com/thing:4894625/files
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
Print two times this half with two connectors and than glue them together :-)
Shuriken and Kunai Hey maker! 👋 A simple and highly printable ninja set. Features: Easy to print design. Print two copies and stick them together for full effect. Great for display or cosplay props. Printing Tips: Print flat for best…
Kunaï Naruto anime style (full size 320mm) + 3 mm diameter pins (Please note attention that some pins have to be cutted to fit properly) Printed with ABS so this can be glued and smoothed with aceton. Shelf has been added for a good…
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
En Naruto, el Kunai se usa casi exclusivamente para el combate. Pudiendo servir como arma arrojadiza, arma cuerpo a cuerpo e incluso para fabricar o formar parte de trampas ninja. Debido a su aerodinámica forma, este arma siempre golpeará…
Enjoy my design of the Kunai used in the anime Naruto! I've looked through numerous sites for a Kunai file that looked accurate to the anime and was comfortable in the hand. Granted, any designs in cartoons/anime will vary from episode to…
I printed in PETG with a 20% infill, triangle pattern. Bottom is optional, but print with 0 bottom layers, 10% hexagon infill. May experiment with 2 part silicone as a bottom.
Model fixed to store normal size Joints and prevent the premature damage. 🥶 You can also download my other models. 👇👇👇👇 https://www.printables.com/es/model/490432-joint-holder https://www.printables.com/es/model/534140-ufo-joint-holder
This model is one single body, and is only possible to print in multiple colors with platform's like Bambu Lab's AMS or Prusa's MMU. A multi-part version will be released soon (ON THIS PAGE) for printers that don't have this capability.
Mortal Kombat X's (2015) version of Scorpion's spear/kunai.
IF YOU ARE CONFUSED BY ALL MODELS READ THE END OF THE DESCRIPTION FOR ALL COMBINATIONS FOR PRINTING !!! Some other models in Naruto Collection : Kunai Shuriken Flying Raijin Kunai Dimensions (total): Length : 30.00 cm Width : 9.80 cm…
Are you brave enough to consume the king of curses? 😈👹 Calling all Jujutsu Kaisen fans! Bring the ultimate cursed object into the real world with this hyper-realistic replica of Sukuna's finger. From its repulsive fleshy texture to its…
Better version: https://cults3d.com/en/3d-model/gadget/minato-s-kunai-guliwer06 This is replica of Minato's kunai from anime "Naruto". Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Colorfil PLA…
For dual color switch filament at layer 18
Feel free to use for your cosplays, to stick it to walls, to toy around with it and so on. It comes in three variations.
This is model of Kunai - throwable cold weapon depicted in comic series Naruto. There are two models - full, which is actual model of the Kunai, and half, for easier print. print it twice and glue together. There are no special…
Minato Namikaze's Kunai. Ready to print in halves and join with dowels. No supports and very easy to print.
💥 Double the flex, double the style! Bring the ultimate endgame weapon from Roblox Rivals into reality with this 1:1 scale, highly accurate 3D printable Gold / Champions Dual Kunai. Designed with a sharp, clean low-poly aesthetic that…
it is just a bunch of cool stuff
A model of the Conniver's Kunai, a knife for spy from TF2. There were a couple of other kunai models on here and Thingiverse, but none of them were very high quality, or they weren't specifically the Conniver's Kunai. I made the…
Add a touch of ninja-inspired style to your reading routine with this unique Kunai Knife Bookmark! Not only does it keep your place in a book, but it also features a fun spinning design that doubles as a fidget accessory. This functional…
I made that prop to see if I can make accurate prop with very limited time and technical resources. If you print in resin, use: blade right features and blade left features and then paint it in preferred colours. To make pattern pop i…
A cool little weapon to have for a cosplay or then if you do use it if you can in self defence
The original model is a great design, thank you for mell0w's design sharing. However, there are many broken surfaces. Some of the broken surfaces, especially the large gap at the top, have been repaired based on the original model.
The original models that you can find on the internet have a lot of issues and are hard to print (most of them are disassembled or just positioned down the plate, giving poor quality results). I cutted the model in 2 simmetrical halves to…
Simple Kunai knife toy model made for kids. Would be nice to add some supports, as far as part of blade are float in the air. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Infill: 100% Category: 3D Printing
DUAL COLOR WITH PAUSE Slice and set a pause in the slicer (at 0.20 it will be layer 6 or 7) Start the print in white, when the printer stops change the filament to black
A kunai is a Japanese tool thought to be originally derived from the masonry trowel. The two widely recognized kinds are the short kunai and the big kunai. Although a basic tool, the kunai, in the hands of a martial arts expert, could be…
This is Kiriko's kunai 3d model ripped from the game files, retopo'd and optimized for 3D printing. I have also added the small details that are part of the normal map and not the actual geometry of the ingame model for extra…
A ninja set with Shuriken and Kunai
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print two halves and stick them together. Layer Hight .28mm Supports - Yes
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Recommended to use top coat smoothing. Filaments Used: PLA Creality Negro Transmission Distance: 1 PLA Creality Rojo Transmission Distance: 4 PLA Creality…
This is a kunai fridge magnet done in two pieces so you can get the handle a different color. Layer height .15 For the blade a pause is needed at 4.25 layer to put the magnet in For the handle change the filament at 85.10 Using these…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
This is a small Kunai Keyring I've created on TinkerCAD based off of the Conniver's Kunai from Team Fortress 2. It is 8 cm in length although feel free to upscale it if you want a prop weapon for cosplay .etc or you could scale it down…
Follow me on MakerWorld for more of my designs, drops, and future releases! : 🔗 https://makerworld.com/en/@Tremmannaik/upload Unique Design & Smooth Spin (You have to try it to believe it). This project is a fresh take on the classic…
a kunai made for fidgeting. similar to figet spinners.
Sorry that the translator have fai;led to convert it to 3mf, so you might need to use fusion 360 to “remake”(adjust size, make some fancy decoration… you name it) it a bit before printing.
Lion King Hakuna Matata Wall Art Scale and print as desired!
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
Did a remix of Kunai by Val in Openscad and converted it to a fridge magnet Using these magnets…
There are separate handle and blade files if anyone wants to adjust the proportions. I recommend printing it in two halves and gluing them together, as if printed flat with supports, the blade side with supports comes out rough and is in…
Please like and download if you like it and upload a make if you make it!!!
I couldn't find a kunai to test the fuzzy skin feature, so I made my own. Not the most accurate, but easy to print and without assembly. Note that the preview doesnt look right because it shows the modifiers.
GET OVER HERE and download this kunai from 2019's Mortal Kombat 11! Instructions: instructables.com/id/Scorpions-Kunai-From-Mortal-Kombat-11
Kunai with stand and Konoha symbol. No support, to glue it easily and reinforce it, insert a 10mm tube (aluminum or other) between part 1 and part 2
Keycap de kakuna para imprimir en 3d
Keychain modeled based on the symbol referring to the character Ryomen Sukuna from Jujutsu Kaisen . Made in Tinkercad, ready to print :D
Public domain kunai model by DreamAlchemist . Originally uploaded to Blend Swap .
This is a kunai I made in Shapr3d. Please download and like I want a 3d printer.
A bold oversized ninja kunai designed as a durable toy prop and display piece. The stylized faceted blade keeps the classic kunai silhouette while using thicker geometry that prints reliably and avoids fragile edges. The finished model…
I bring you the original Kunai the old knife of ninja
A small Kunai that is about 145mm long and relatively small, with 15% infill will print in under 40 mins, and as a bonus when you print with grid support and brim in prusaslicer and you carefully remove the support can have 2 for one as…
Tolerancia de modelo: Uniones con 0.05 de distancia entre piezas. Alturas de capas recomendadas : ( H ) y ( M ) a 0.08. Resto de piezas desde 0.12 a 0.2. Partes espejo: ( H ) y ( M ) son las piezas que tienen que duplicarse con la…
Celí tisk je složen z několika dílů. Kroužků je potřeba 10 ks. Čepel a rukojeť 2 ks. Ztužení 1 ks. Vše až na ztužení je z PLA pouze ono ztužení jsem tisk z Prusament PC.
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to…
Inspired by Wraith's kunai from Apex Legends.
Naruto Kunai Shifter, made to fit a M12 x1.25 thread (perfectish fit) first made it for my Subaru WRX but it'll fit any shifter with that thread size. I usually print using supports on the first layer of the inside shifter cut out. the…
According to a legend, during the golden age of jujutsu over 1,000 years ago, Sukuna was an Imaginary Demon, though in truth was a human sorcerer, and other sorcerers gave their all to defeat him. After his death, he became a cursed…
Kakuna model ripped from the Pokemon X/Y game files.
Kunai d'Itachi de l'univers de Naruto
This is a 3D printable kunai , perfect for ninja cosplay, costume props, or display . Designed as a safe, lightweight replica , it captures the classic ninja knife shape while being fully printable on standard FDM printers. The design…